Amber Innovation A003S Smart power bank User Manual Exhibit 08 Users Manual
Amber Innovation Smart power bank Exhibit 08 Users Manual
Exhibit 08 Users Manual
A003S
User’s Manual
A003S is a smart power bank. It has 4200mAh Li-ion rechargeable battery
and could be used to charge your mobile phone or other electronic devices
when their batteries are low. It is also a Bluetooth Low Energy proximity tag.
It could connect with your mobile phone through Bluetooth Low Energy.
When A003S is separated from your mobile phone, both sides will generate
sound alert.
Charge other device
Plug in the charging cable of your mobile phone into the output socket. Press
the button once and it will start to charge your phone.
Charge itself
Plug in the accompanied cable into the input socket. Plug the other end to
any power source which has USB port. A blue led will start to flash once it
starts to charge. When the charge is complete the led will stop flashing.
Turn on the torch
Hold the button until you see the torch is on. Hold the button again until the
torch is off.
Turn on the Bluetooth®
Before you connect your phone with A003S through Bluetooth®, you need to
wake up the Bluetooth in A003S. You just flip A003S and you will see a blue
led flashing.
FCC Information
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received;
including interference that may cause undesired
operation.
Federal Communications Commission (FCC) Statement
This Equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide
reasonable protection against harmful interference
in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV
technician for help.
Warning: Changes or modifications to this unit not
expressly approved by the party responsible for
compliance could void the user authority to operate the
equipment.
Tested to comply with FCC standard. FOR HOME OR
OFFICE USE.
Warning :
This equipment complies with FCC RF radiation exposure
limits set forth for an uncontrolled environment. & This
device and its antenna(s) must not be co-located or
conjunction with any other antenna or transmitter
LED
Torch
Power Input
Output
button