Amtran Technology Co XVT473SV-WL WLAN USB CARD WN8522B 3-LF-MT User Manual Product Specifications

Download:
Mirror Download [FCC.gov]
Document ID	1273013
Application ID	Xp1TglgVTMjt4ygq9Wnggw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	62.07kB (775855 bits)
Date Submitted	2010-04-27 00:00:00
Date Available	2010-04-27 00:00:00
Creation Date	2010-04-26 13:53:05
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2010-04-26 13:53:05
Document Title	Product Specifications
Document Creator	Microsoft® Office Word 2007
Document Author:	michael_teng

Product Specification
Product Specification
WN8522B 3-LF-MT
IEEE Dual Band 802.11n USB2.0 module for DTV
v.03
WN8522B 3
Product Specification
Table of Contents
Chapter 1
Introduction _____________________________________________________ 4
1. Introduction ________________________________________________________ 4
1.1 Product Features ____________________________________________________ 4
1.2 Applications _______________________________________________________ 4
Chapter 2
Hardware _______________________________________________________ 5
2.1 General Overview __________________________________________________ 5
2.2 Hardware Architecture _______________________________________________ 5
2.3 Main Chipset Information ____________________________________________ 5
2.4 PCB dimension ___________________________________ 錯誤! 尚未定義書籤。
2.5 Pin Define _________________________________________________________ 6
2.6 Antenna Cable ______________________________________________________ 7
Chapter 3 Specifications ___________________________________________________ 12
References ________________________________________________________________ 14
WN8522B 3
Product Specification
Revision History
Edition #
Reason for revision
Issue date
Written by
V 0.1

Initial Document
2009/09/17
Troy Chen
V0.2

Update PCB outline & Antenna cable
2009/12/10
Andre Lin
V03
5G spec listed
2010/06/26
Troy Chen
WN8522B 3
Product Specification
Chapter 1
Introduction
1. Introduction
WN8522B 3 is a dual band wireless 802.11n USB module for DTV, Bluray Players, etc..
which enables consumer devices to support wireless connectivity over 802.11a/b/g/n WLAN .
1.1
Product Features

High speed for wireless LAN connection, RX up at 300 Mbps data rate.


Backward compatible to the existing IEEE 802.11a/b/g WLAN infrastructure.
Support USB v2.0
1.2
Applications
 Module for Connected TV
WN8522B 3
Product Specification
Chapter 2
2.1
General Overview


USB 2.0 Interface
2 * antenna connectors
Hardware
2.2 Hardware Architecture
Broadcom 4323 single chip USB2.0
2.3
Main Chipset Information
BCM4323: MIMO MAC + Baseband processor and RF with fully forward compatible with IEEE 802.11n
draft2.0 standard.
2.4 PCB dimension
WN8522B 3
Product Specification
2.5 Pin define
WN8522B 3
Product Specification
2.5 Antenna Cable
XVT32/ XVT37
WN8522B 3
Product Specification
XVT42/ XVT47
WN8522B 3
Product Specification
XVT55
WN8522B 3
Product Specification
Chapter 3
3.1
Software
Operating System Supported
 Windows 2000, XP, Vista
3.2 Wireless Mode Supported
 AP (Infrastructure) Client mode
3.3 Security
 AP (Infrastructure) mode supports
 Static WEP that support both 64 and 128 bit keys.
 WPA(TKIP) with PSK
 Ad-hoc mode supports
 None (plaintext)
 Static WEP that supports both 64 and 128 bit keys.
WN8522B 3
10
Product Specification
Chapter 4
Appearance
TBD
WN8522B 3
11
Product Specification
Chapter 5

Specifications
Frequency Band:
802.11n Radio: 2.4 GHz
802.11g Radio: 2.4 GHz
802.11b Radio: 2.4 GHz
USA – FCC
Canada – IC
Europe – ETSI
Japan – STD-T66/STD-33
802.11a Radio : 5 GHz
5.150~5.250GHz
5.250~5.350 GHz
5.470~5.725 GHz
5.725~5.850GHz
2412~2462MHz (Ch1~Ch11)
2412~2462MHz (Ch1~Ch11)
2412~2472MHz (Ch1~Ch13)
2412~2484MHz (Ch1~Ch14)

Operating Channels:
IEEE 802.11b/g/n compliant:
11 channels (US, Canada)
13 channels (ETSI)
14 channels (Japan)
 Transmit Power and Sensitivity:
TX Output Power:(Typical)
11b
16.5 +/- 1.5 dBm
11g
14.5 +/- 1.5 dBm@54Mbps
11n
13.5 +/- 1.5 dBm
11a
13.5 +/- 1.5 dBm
Rx Sensitivity:(Typical)
-84 dBm @11 Mbps
-72 dBm @54 Mbps
-64 dBm @64-QAM, 20MHz channel spacing
-61 dBm @64-QAM, 40MHz channel spacing

Modulation
DBPSK @1Mbps
DQPSK@2Mbp
WN8522B 3
12
Product Specification
CCK@5.5/11Mbps
BPSK@6/9 Mbps
QPSK@12/18Mbps
16-QAM@24Mbps
64-QAM@48/54Mpb and above, RX up to 300Mbps

Current consumption(5V DC):
TX: <480mA Max, @MCS15, 40MHz
RX: <380 mA Max, @MCS15, 40MHz
Radio OFF mode: <60 mA



Operating Temperature: 0 ~ 40 oC ambient
Storage Temperature: -10 ~ 70 oC ambient
Humidity: 5 ~ 90% and must be non-condensing

Regulation and certification compliance available:
WHQL
ETSI/CE
ESD: EN61000-4-2, which specifies 4kV contact and 8kV air discharge.
WN8522B 3
13
Product Specification
References




BRCM Reference Design Functional Specification
IEEE 802.11b Standard Specification
IEEE 802.11g Standard Specification
IEEE 802.11n draft Standard Specification
The drawings, specifications and the data contain herein are the exclusive property of Arcadyan
Technology Corp. issued in strict confidence and shall not, without the prior written permission of
Arcadyan Technology Corp., be reproduced, copied or used, in parts or as a whole, for any purpose
whatsoever, except the manufacture of articles for Arcadyan Technology Corp.
Arcadyan makes no warranties with respect to the correctness, accuracy or wholeness of this
specification. The information in this document is subject to change without notice.
Arcadyan
reserves the right to make revisions to this document and the product described herein without
obligation to notify any person or entity of any such changes.
WARNING
This document is intended for internal use only.
A Non-Disclosure
Agreement (NDA) is required to release this document under any
circumstances
WN8522B 3
14
Product Specification
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
●
●
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible
for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
For product available in the USA/Canada market, only channel 1~11 can be operated.
Selection of other channels is not possible.
This device and its antenna(s) must not be co-located or operation in conjunction with any
other antenna or transmitter.
This device is going to be operated in 5.15~5.25GHz frequency range, it is restricted in indoor
environment only.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
WN8522B 3
15
Product Specification
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
IMPORTANT NOTE:
This module is intended for OEM integrator. The OEM integrator is still
responsible for the FCC compliance requirement of the end product, which
integrates this module.
20cm minimum distance has to be able to be maintained between the antenna
and the users for the host this module is integrated into. Under such
configuration, the FCC radiation exposure limits set forth for an
population/uncontrolled environment can be satisfied.
Any changes or modifications not expressly approved by the manufacturer
could void the user's authority to operate this equipment.
USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to
keep at least 20cm separation with the antenna while this end product is
installed and operated. The end user has to be informed that the FCC
radio-frequency exposure guidelines for an uncontrolled environment can be
satisfied. The end user has to also be informed that any changes or
modifications not expressly approved by the manufacturer could void the user's
authority to operate this equipment. If the size of the end product is smaller
than 8x10cm, then additional FCC part 15.19 statement is required to be
available in the users manual: This device complies with Part 15 of FCC rules.
Operation is subject to the following two conditions: (1) this device may not
cause harmful interference and (2) this device must accept any interference
received, including interference that may cause undesired operation.
LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following "
Contains TX FCC ID: MDZXVT473SV-WL ". If the size of the end product is
larger than 8x10cm, then the following FCC part 15.19 statement has to also
be available on the label: This device complies with Part 15 of FCC rules.
WN8522B 3
16
Product Specification
Operation is subject to the following two conditions: (1) this device may not
cause harmful interference and (2) this device must accept any interference
received, including interference that may cause undesired operation.
WN8522B 3
17

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 17
Language                        : zh-TW
Tagged PDF                      : Yes
Title                           : Product Specifications
Author                          : michael_teng
Creator                         : Microsoft® Office Word 2007
Create Date                     : 2010:04:26 13:53:05
Modify Date                     : 2010:04:26 13:53:05
Producer                        : Microsoft® Office Word 2007

EXIF Metadata provided by EXIF.tools