Anker Technology R2220 Roav DashCam C2 Pro User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3719468
Application ID	EjZcg4NiHGNWfqAr0d9jnQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	273.22kB (3415236 bits)
Date Submitted	2018-01-19 00:00:00
Date Available	2018-01-19 00:00:00
Creation Date	2017-12-05 15:59:50
Producing Software	Adobe PDF Library 11.0
Document Lastmod	2018-01-09 18:02:12
Document Title	User Manual
Document Creator	Adobe InDesign CC 2014 (Windows)

Owner’s Manual
Model: R2220
51005000800 V01
Roav DashCam C2 Pro
Table of Content
Safety Instructions
01
At a Glance
01
Inserting Memory Card
02
Installing Your DashCam
03
Connecting to Power
05
Downloading Roav App
06
Using Your DashCam
07
System Setup
09
Specifications
11
FAQ
12
Notice
13
Safety Instructions
Please read and understand all instructions before using
this product. If damage is caused by failure to follow the
instructions, the warranty does not apply.
DashCam
GPS Suction mount
•
•
•
•
•
•
•
•
•
Car charger
•
•
•
Mount
•
•
Owner’s Manual
DASHCAM C1
Charging cable
Crowbar
Manual
•
Keep these instructions.
Do not drop, puncture or disassemble this product.
This product shall not be exposed to dripping or splashing.
Avoid long exposure to direct sunlight, which may cause damage.
Exposing this product to open flames may cause explosion.
Use original accessories only.
Do not install this product where it will block the driver’s view
of the road or the deployment of the airbag.
Keep your attention on the road. Do not operate the controls
of this product while driving.
Ensure the camera lens is kept clean and there is nothing
blocking the lens.
Setup time and date accurately before using this product.
Do not use the charger if the cord is damaged or broken.
Remove this product from your vehicle when not in use for a
long period.
Keep out of reach of children.
Use clean, soft cloth to clean. Do not use any corrosive
cleaner/oil to clean.
The Company is NOT responsible for the loss of any data/
content during operation.
01
At a Glance
Inserting Memory Card
Do not remove or insert microSD / TF card when this
product is powered on, which may damage the card.
For reliable operation, use a Class 10, 32GB microSD / TF card. For
a 64GB/128GB card, format it before using. It is recommended to
format the card regularly.
Camera lens
Air vent
Power button
Memory card slot
Speaker
LED indicator
• Flashing blue: recording in progress
• Steady red: no recording status
Micro USB charging port
Buttons
LCD screen
Card Capacity
32 GB
64 GB
128 GB
1080P 30FPS
320 min
640 min
1280 min
720P 60FPS
360 min
720 min
1440 min
720P 30FPS
480 min
960 min
1920 min
Insert a microSD / TF card with the gold contacts facing
the screen side of the DashCam. Push the card until it
clicks into place.
To remove the card, gently push its top edge inward until it
clicks, and then pull it out of the slot.
02
03
Installing Your DashCam
• Never install this product while driving.
• Install this product near the rear-view mirror to obtain
the best open-field view. Do not install in a location
that will obstruct your required driving view.
• Make sure that the lens is within the wiping range
of the windscreen wiper to ensure a clear view even
when it rains.
• Do not touch the lens with your fingers. Finger grease
may be left on the lens and will result in unclear videos.
• The mount is adhesive and may be destroyed if it is
removed from the windshield.
Select a location on the windshield near the bottom right
corner of the rear-view mirror, clean with clear water and
wait until fully dry.
Remove 3M adhesive sticker and firmly affix the mount onto
the windshield. Alternatively, cover the suction mount onto
the windshield and rotate the lock as indicated.
Use the crowbar to press and hide the charging cable
into the seams and weatherstrips around the edge of the
dashboard.
Adjust the lens viewing angle to ensure that it is aligned
with the road ahead, then rotate the fixing knob to fasten.
Attach the DashCam onto the mount.
04
05
Connecting to Power
Connect the car charger and DashCam by using the charging cable.
(*When using the GPS suction mount, plug the micro-USB cable
attached to it into the DashCam first, then connect the car charger
and the GPS suction mount by using the charging cable.)
Plug the other end of the car charger to your vehicle’s cigarette
lighter socket.
Downloading Roav App
Download the Roav app from the App Store or Google Play.
Connect DashCam with Smartphone
When successfully connected with your smartphone via
built-in Wi-Fi, you can save and playback the driving recording
videos on your smartphone. You can also change settings of
the DashCam via Roav app.
When successfully connected, DashCam stops recording.
Press
(Menu) , select "WIFI" > "On" to enable WiFi on
DashCam.
Enable WiFi on your smartphone, find “Roav DashCam
C2 Pro” on the list and connect it, enter password (initial
password: goroavcam) if required.
Follow the instructions on your smartphone to complete the
connection.
06
Once the car engine is started, DashCam will automatically
power on and start recording. Once the car engine is shut
down, DashCam will automatically save the recording and
turn off.
07
Playback Videos
Using Your DashCam
The DashCam stops recording while viewing videos or settings.
As a driver, you have full responsibility to drive safely and adhere
to all applicable traffic regulations.
Press
to view all saved videos.
Select a video to playback.
Record Videos
When connected to a car charger, DashCam automatically
starts recording and a red dot flashes on the screen. The
current recording duration is displayed, and the current date
and time is displayed.
To enable / disable the audio recording, press
Button
Virtual Button Function
Back to previous menu
Lock Current / Unlock
Current
Delete Current / Delete All
Protect the Current Recording
By default, DashCam uses a sensor to automatically detect
accidental collisions and protect the video file with duration
of 30 seconds, and
is displayed. This indicates that those
recordings have been locked and will not be overwritten by new
video clips.
To protect the current recording manually, press
08
Play / Pause
09
System Setup
To adjust DashCam’s settings, Press
Menu Options Description
Resolution
Set a desired video
resolution.
Night Vision Adjust the brightness to
Enhancement enhance night vision.
Available Options
720P 60FPS / 720P
30FPS / 1080P 30FPS
Licence plate mode
/Panorama mode/
Balance mode
Driving
Collision
Detection
Sensitivity for gravity helps
to detect vibration and
Low / Medium /
shock while driving and
High / Off
makes DashCam to respond
appropriately.
Parking
Collision
Detection
Enable to keep DashCam in
standby mode. Motion will
Low / Medium/
be detected for 15 times and
High / Off
DashCam starts recording a
30 second video each time.
Time Setup
Language
10
Set date and time
Press
to adjust
the value, press to
next option, press
to save
English / Deutsch /
Set on-screen display menu 日本語 / 简体中文
language.
/繁体中文/Español
/ Italiano / Français
LCD Auto Off
Turn off the screen backlight 30 Seconds / 60
after a period of inactivity. Seconds / Off
Loop Recording
Set the duration of each
recording video clip.
Button Sound / Voice
Machine Sound prompts / Power On/Off
Sound
1 Minute / 3 Minutes
/ 5 Minutes / 10
Minutes
On / Off
GPS
Enable / disable GPS
positioning module to
record the complete
driving path.
On / Off
WiFi
Connect with smartphone.
On / Off
Format
Format the memory card and
Cancel / OK
all the data will be deleted.
Water Mark
Display / hide logo / date /
On / Off
GPS speed.
Default
Reset all options to the
default settings.
Frequency
About
Button
Cancel / OK
Match the video frequency of
50 Hz (EU / China) /
DashCam with the electrical
60 Hz (US)
frequency of your location.
Check the current version
number.
Virtual Button Function
Back to recording mode
11
Toggle the previous setting
FAQ
Toggle the next setting
Click to confirm a selection
Specifications
Specifications are subject to change without notice.
Screen: 3” LCD color TFT (960 x 240)
Camera sensor: Sony Exmor IMX 291
Camera lens: wide-angle lens 145°
Chipset: Ambarella A12
Power input: 5V
1A
Can not record?
• Check if the memory card is inserted properly and there is
enough free capacity.
• Check the battery level.
Blurred image?
• Use a clean, soft lens-cleaning cloth to gently clean the
lens.
Malfunction or crash?
• Press and hold the POWER button for at least 8 seconds.
Blank screen?
• The screen saver is activated. Change settings to “Off” if
required.
How to enable parking monitor?
• Press , select “Parking Monitor” > “ON”.
Worry about the memory card is full?
• Continuous loop recording allows to overwrite the old
unlocked files.
Max video resolution: 1080P 30FPS (1920x1080)
Video clip format: .MP4
Battery capacity: 470mAh
Operating temperature range: -20°C to 70°C / -4°F to 158°F
Operating temperature range: 0°C to 70°C / 32°F to 158°F
(Parking monitor)
Weight: Approx. 110 g / 3.6 oz
Size: 99*30*55 mm / 3.9*1.2*2.2 in
12
13
Notice
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) This device must accept
any interference received, including interference that may
cause undesired operation.
Warning: Changes or modifications not expressly approved
by the party responsible for compliance could void the user's
authority to operate the equipment.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures: (1)
Reorient or relocate the receiving antenna. (2) Increase the
separation between the equipment and receiver. (3) Connect
the equipment into an outlet on a circuit different from that to
which the receiver is connected. (4) Consult the dealer or an
experienced radio / TV technician for help.
14
This device complies with Industry Canada licence-exempt RSS
standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including
interference that may cause undesired operation of the device."
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement."
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
15
12-month limited warranty
Lifetime technical support
support@goroav.com
+1 (800) 988 7973 (US) Mon-Fri 9:00 - 17:00 (PT)
Live Chat on Roav app and website
@GoRoav
@GoRoav

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2017:12:05 15:59:50+08:00
Creator                         : Adobe InDesign CC 2014 (Windows)
Modify Date                     : 2018:01:09 18:02:12+08:00
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2018:01:09 18:02:12+08:00
Creator Tool                    : Adobe InDesign CC 2014 (Windows)
Instance ID                     : uuid:1ff52630-619f-45ee-86f6-a5fae578f770
Original Document ID            : xmp.did:93e33453-100d-a34b-83d6-30ccbab0c2a7
Document ID                     : xmp.id:6a5c9355-fba7-424b-a4cc-2cdfa6b32884
Rendition Class                 : proof:pdf
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2014 (Windows)
History Changed                 : /
History When                    : 2017:12:05 15:59:50+08:00
Derived From Instance ID        : xmp.iid:8cdad080-3f80-e94a-95c9-b64329d82ab8
Derived From Document ID        : xmp.did:93e33453-100d-a34b-83d6-30ccbab0c2a7
Derived From Original Document ID: xmp.did:93e33453-100d-a34b-83d6-30ccbab0c2a7
Derived From Rendition Class    : default
Format                          : application/pdf
Producer                        : Adobe PDF Library 11.0
Trapped                         : False
Page Count                      : 11

EXIF Metadata provided by EXIF.tools