Anker Technology R5141 Roav VIVA X User Manual Users manual

Anker Technology Co., Limited Roav VIVA X Users manual

Users manual

Owner’s ManualRoav VIVA XModel: R514151005000687    V01
Table of ContentImportant Safety Instructions  01Introduction 01Using Roav VIVA X  04Connecting with Your Car  05Using Roav VIVA X with Alexa  06Charge Your Devices  07Specifications 07Notice 08Trademark 09Customer Service 10
01       02Important Safety InstructionsPlease read and understand all instructions before using this product. If damage is caused by failure to follow the instructions, the warranty does not apply. •  Keep these instructions. •  Do not drop, puncture or disassemble this product. •  This product shall not be exposed to dripping or splashing liquids. •  Avoid long exposure to direct sunlight, which may cause damage.•  Exposing this product to open flames may cause it to explode.  •  Do not use the product in strong magnetic fields.•  Use a dry, soft lint-free cloth to clean. Do not use any corrosive cleaner or oil to clean.IntroductionFeatures•  2-port USB PowerIQ car charger by ANKER.•  Supports voice control via the Alexa services.*•  Enables music on smartphone to be streamed to car’s radio via an FM transmitter.* Read the AVS Card to learn more proper commands to ask Alexa. What’s Included Owner’s ManualQuick Start GuideRoav VIVA XAt a GlanceUSB charging port LED ring indicatorCar charger connector Microphones / Multifunction button   Button ControlsAlexa Voice ServiceWake up 1  Press Mute / Unmute microphone1  Long press for 1 secondCallsAnswer / End call1  PressReject call2  Press two timesTimer & AlarmStop1  Press
03       04LED IndicationsStatus LED Ring IndicatorPower on  Lights up blue and circulates a cyan light.Ready to pair  Pulses blue. ( Pulses blue for 5 minutes,   glows orange for 30 seconds and fades out if no device is detected)No connection Fades out.Connected  Glows blue for 5 seconds and then dims to 50% of brightness.Notification  Arrives: yellow light glows once.          Queues: yellow light pulses slowly.Wake up  Expanding cyan light from upper left to bottom right.Thinking  2 cyan lights rotate.Speaking  Pulses cyan.Finished  A cyan light dims from bottom right to upper left.Incoming call  Pulses green.During call  Lights up green.Alarm & timer  Alternately pulses blue and cyan.Volume  Expanding white light from upper left to bottom right. Microphone muted  LED ring and microphone icon turn red.Using Roav VIVA XPlug Roav VIVA X into your vehicle’s cigarette lighter socket. Start the engine and Roav VIVA X will automatically power on. The LED Ring Indicator will turn blue and a cyan light will circulate around the LED Ring Indicator.Download the Roav VIVA app from the App Store (iOS devices) or Google Play (Android devices).Open the app and create a Roav account.Select “Roav VIVA X” as the device to be added.
05       06Connecting with Your CarTo enable the voice service feature through your car stereo, select one of the two connection modes to connect your smartphone with the car stereo. Once connected, you can control Roav VIVA X via the app.For Vehicles with Built-in BluetoothSelect [Bluetooth Mode] in the app and follow the on-screen instructions to complete connection setup. Warning: If you connect Roav VIVA X to your car stereo directly via Bluetooth, the hands-free calling feature will not be available. BT BTFor Vehicles without Built-in Bluetooth FM transmitter is supported with Roav VIVA X. Select [FM Mode] in the app and follow the on-screen instructions to complete connection setup.When the FM frequencies of your car radio and in the app are tuned to the same frequency, the audio is broadcasted via your car stereo. To get the best audio performance, tune to an unoccupied frequency (one with a lot of white noise)*.BT FM*How to find a frequency with white noise radio:1. Turn on your car’s radio and adjust the volume to a level you can hear.2. Try every FM frequency from 87.5-107.9 MHz (lowest to highest) on your car radio. Remember frequencies that have white noise.3. In the Roav VIVA app, tune the FM frequency to the same frequency as the car radio's.Using Roav VIVA X with AlexaRoav VIVA X comes with voice service. You can play music, get navigation directions, manage everyday tasks, easily control smartphones or other smart devices around you by using your voice. Follow the on-screen instructions in the Roav VIVA app to login with your Amazon account. Press the multifunction button to activate the voice service.  Always say the wake word “Alexa” first and then your request. Roav VIVA X will respond instantly. To learn more proper commands to ask Alexa, read the AVS Card. To explore more skills with Alexa, go to www.amazon.com/MeetAlexa and download the Amazon Alexa app on your iOS or Android device.Alexa, .......
07       08Charge Your DevicesRoav VIVA X contains dual USB charging ports. You can charge two devices at the same time with a maximum output of 5V/4.8A. 2.4A2.4ASpecifications Specications are subject to change without notice.DC input: 12V - 24VPower output: 5V   4.8 A MaxBluetooth version: V4.1Bluetooth transmission distance: 10 m / 393.7 inFM frequency range: 87.5-107.9 MHz FM transmission range: 2 m / 78.7 inOperating temperature range: -4°F to 104°F / -20°C to 40°CStorage temperature range: -40°F to 185°F / -40°C to 85°CNoticeThis product complies with the radio interference requirements of the European Community.BT Operating Frequency Range: 2402-2480 MHzThis product is designed and manufactured with high quality materials and components, which can be recycled and reused.This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.FCC StatementThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help. FCC Radio Frequency Exposure StatementThe device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure condition. The min separation distance is 20cm.
09       10TrademarkAmazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates.Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries.Google Play and the Google Play logo are trademarks of Google Inc.“Android” is a registered trademark of Google Inc. in the United States and other countries.“iOS” is a registered trademark of Apple Inc. in the United States and other countries.The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.Other trademarks and trade names are those of their respective owners.Customer Service12-Month Limited WarrantyLifetime Technical Supportsupport@goroav.com+1 (800) 988 7973 (US) Mon-Fri 9:00 - 17:00 (PT)+44 (0) 1604 936200 (UK) Mon-Fri 6:00 - 11:00 (GMT) +49 (0) 69 9579 7960 (DE) Mon-Fri 6:00 - 11:00   @GoRoav           @GoRoav© Anker Technology Co., Limited. All rights reserved. ROAV and the ROAV logo are trademarks of Anker Technology Co., Limited, registered in the United States and other countries.
11       12

Navigation menu