Anker Technology R5141 Roav VIVA X User Manual Users manual
Anker Technology Co., Limited Roav VIVA X Users manual
Users manual
Model: R5141 51005000687 V01 Owner’s Manual Roav VIVA X Table of Content Important Safety Instructions 01 Introduction 01 Using Roav VIVA X 04 Connecting with Your Car 05 Using Roav VIVA X with Alexa 06 Charge Your Devices 07 Specifications 07 Notice 08 Trademark 09 Customer Service 10 At a Glance Important Safety Instructions Please read and understand all instructions before using this product. If damage is caused by failure to follow the instructions, the warranty does not apply. • Keep these instructions. • Do not drop, puncture or disassemble this product. • This product shall not be exposed to dripping or splashing liquids. • Avoid long exposure to direct sunlight, which may cause damage. • Exposing this product to open flames may cause it to explode. • Do not use the product in strong magnetic fields. • Use a dry, soft lint-free cloth to clean. Do not use any corrosive cleaner or oil to clean. USB charging port LED ring indicator Car charger connector Microphones / Multifunction button Introduction Button Controls Features • 2-port USB PowerIQ car charger by ANKER. • Supports voice control via the Alexa services.* • Enables music on smartphone to be streamed to car’s radio via an FM transmitter. * Read the AVS Card to learn more proper commands to ask Alexa. What’s Included Alexa Voice Service Wake up Mute / Unmute microphone Answer / End call Reject call Roav VIVA X Press Long press for 1 second Press Press two times Timer & Alarm Stop 01 Calls Quick Start Guide Owner’s Manual Press 02 LED Indications Status Power on Using Roav VIVA X LED Ring Indicator Lights up blue and circulates a cyan light. Ready to pair Pulses blue. ( Pulses blue for 5 minutes, glows orange for 30 seconds and fades out if no device is detected) No connection Fades out. Connected Glows blue for 5 seconds and then dims to 50% of brightness. Notification Arrives: yellow light glows once. Queues: yellow light pulses slowly. Wake up Expanding cyan light from upper left to bottom right. Thinking 2 cyan lights rotate. Speaking Pulses cyan. Finished A cyan light dims from bottom right to upper left. Incoming call Pulses green. During call Lights up green. Alarm & timer Alternately pulses blue and cyan. Volume Expanding white light from upper left to bottom right. Microphone muted LED ring and microphone icon turn red. Plug Roav VIVA X into your vehicle’s cigarette lighter socket. Start the engine and Roav VIVA X will automatically power on. The LED Ring Indicator will turn blue and a cyan light will circulate around the LED Ring Indicator. Download the Roav VIVA app from the App Store (iOS devices) or Google Play (Android devices). Open the app and create a Roav account. Select “Roav VIVA X” as the device to be added. 03 04 Connecting with Your Car To enable the voice service feature through your car stereo, select one of the two connection modes to connect your smartphone with the car stereo. Once connected, you can control Roav VIVA X via the app. For Vehicles with Built-in Bluetooth Select [Bluetooth Mode] in the app and follow the on-screen instructions to complete connection setup. Warning: If you connect Roav VIVA X to your car stereo directly via Bluetooth, the hands-free calling feature will not be available. BT BT *How to find a frequency with white noise radio: 1. Turn on your car’s radio and adjust the volume to a level you can hear. 2. Try every FM frequency from 87.5-107.9 MHz (lowest to highest) on your car radio. Remember frequencies that have white noise. 3. In the Roav VIVA app, tune the FM frequency to the same frequency as the car radio's. Using Roav VIVA X with Alexa Roav VIVA X comes with voice service. You can play music, get navigation directions, manage everyday tasks, easily control smartphones or other smart devices around you by using your voice. Follow the on-screen instructions in the Roav VIVA app to login with your Amazon account. Press the multifunction button to activate the voice service. Always say the wake word “Alexa” first and then your request. For Vehicles without Built-in Bluetooth FM transmitter is supported with Roav VIVA X. Select [FM Mode] in the app and follow the on-screen instructions to complete connection setup. When the FM frequencies of your car radio and in the app are tuned to the same frequency, the audio is broadcasted via your car stereo. To get the best audio performance, tune to an unoccupied frequency (one with a lot of white noise)*. Roav VIVA X will respond instantly. To learn more proper commands to ask Alexa, read the AVS Card. To explore more skills with Alexa, go to www.amazon.com/ MeetAlexa and download the Amazon Alexa app on your iOS or Android device. Alexa, ....... BT 05 FM 06 Charge Your Devices Notice Roav VIVA X contains dual USB charging ports. You can charge two devices at the same time with a maximum output of 5V/4.8A. This product complies with the radio interference requirements of the European Community. BT Operating Frequency Range: 2402-2480 MHz This product is designed and manufactured with high quality materials and components, which can be recycled and reused. 2.4A 2.4A This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product. FCC Statement Specifications Specifications are subject to change without notice. DC input: 12V - 24V Power output: 5V 4.8 A Max Bluetooth version: V4.1 Bluetooth transmission distance: 10 m / 393.7 in FM frequency range: 87.5-107.9 MHz FM transmission range: 2 m / 78.7 in Operating temperature range: -4°F to 104°F / -20°C to 40°C Storage temperature range: -40°F to 185°F / -40°C to 85°C 07 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help. FCC Radio Frequency Exposure Statement The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure condition. The min separation distance is 20cm. 08 Trademark Customer Service 12-Month Limited Warranty Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates. Lifetime Technical Support Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries. support@goroav.com Google Play and the Google Play logo are trademarks of Google Inc. “Android” is a registered trademark of Google Inc. in the United States and other countries. “iOS” is a registered trademark of Apple Inc. in the United States and other countries. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners. +1 (800) 988 7973 (US) Mon-Fri 9:00 - 17:00 (PT) +44 (0) 1604 936200 (UK) Mon-Fri 6:00 - 11:00 (GMT) +49 (0) 69 9579 7960 (DE) Mon-Fri 6:00 - 11:00 @GoRoav @GoRoav © Anker Technology Co., Limited. All rights reserved. ROAV and the ROAV logo are trademarks of Anker Technology Co., Limited, registered in the United States and other countries. 09 10 11 12
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.6-c011 79.156289, 2014/03/31-23:39:12 Create Date : 2017:10:23 17:28:13+08:00 Metadata Date : 2017:10:23 17:28:20+08:00 Modify Date : 2017:10:23 17:28:20+08:00 Creator Tool : Adobe InDesign CC 2014 (Windows) Instance ID : uuid:ea7891bc-2f1f-4a53-ab01-509807004a24 Original Document ID : xmp.did:30e524c4-f1fc-ff4d-8894-1b26cd427274 Document ID : xmp.id:ac5147f8-5132-8d46-912c-e6798f125670 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:3011a6f7-e70b-4c42-b5c2-b99f4e45746a Derived From Document ID : xmp.did:cb8cb2d3-920d-f84b-8d3d-406dd33cc638 Derived From Original Document ID: xmp.did:30e524c4-f1fc-ff4d-8894-1b26cd427274 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2014 (Windows) History Changed : / History When : 2017:10:23 17:28:13+08:00 Format : application/pdf Producer : Adobe PDF Library 11.0 Trapped : False Page Count : 8 Creator : Adobe InDesign CC 2014 (Windows)EXIF Metadata provided by EXIF.tools