Ants IOT technology MYBLE Bluetooth module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3007919
Application ID	6rd1f/1JpRIp6qwRv41/NQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	41.65kB (520653 bits)
Date Submitted	2016-05-27 00:00:00
Date Available	2016-05-27 00:00:00
Creation Date	2016-05-19 20:06:09
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2016-05-24 15:54:43
Document Title	R:\2016年3月\M蚂蚁雄兵\FCC 递交资料\Mesh?Bluetooth?Module?User?Manual.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

Shenzhen Ants IOT technology Co., Ltd
Product Name: Bluetooth module
Model No.:BPS_MODULE
OEM/Integrators Installations User Manual
(Note: The module is limited to OEM installation ONLY; The OEM integrator is responsible for ensuring that the end-user has no
manual instructions to remove or install module)
Page：1/1
Shenzhen Ants IOT technology Co., Ltd
1. General
1.1 Introduction
Product Name
Bluetooth module
Model No：
BPS_MODULE
Function：
Bluetooth low energy BLE module supporting mesh
networking
Control Method： APP control、remote control
1.2 Module support diversities based on connectors used as shown in Table 1-1
1.3 Features










Bluetooth specification V4.0 with mesh networking supported
Embed 32-bit high performance RISC MCU with clock up to 48MHZ
Compact package size (18x15x2.8mm)
Host Controller interface(HCI) over UART,I2C and USE in full speed
Class I supported with 8dBm maximum TX power
Built-in Flash up to 512Kbytes, system clock
Built-in 16KB SRAM
Module Size 18 x 15 x 2.8mm
Receiving Sensitivity -92dBm，Maximum transmit power up to +8dBm，Data transfer rate up to 2Mbps
Conform to FCC, CE, ROSH and other certification
1.4 Applications
 Set Top Box
 Consumer Electronics: TV, home theatre system, blue-ray player/Recorder
 Human-interface Devices: Remote Control, Mouse, Keyboard
 LED Lighting
 Smart AC switch
 Health Care
 Sports and leisure Equipment
 Mobile Phone Accessories
 Smart Metering
 USB Dongle
 Wearable devices
 Other Hands-Free Devices
Page：1/2
Shenzhen Ants IOT technology Co., Ltd
2. Characteristics
2.1 Electrical characteristics
Module size
18 x 15 x 2.8mm
RF Transmitting power level
In-system-programmable flash 512k bytes
RAM
16Kbytes x 32 bits
Date Rate
250kbps,500kbps,1Mbps,2Mbps
Antenna
PCB Printed Antenna: Gain 0dBi
Operational RF distance
30m in the open field without RF interference
Physical connector
(1) 1x8 1.27mm pitch through terminal
(2) 13-pin PCB board edge connetcor
Operational Voltage
1.9V to 3.6V
Operating ambient temperature range TA
-40℃—+55℃
Reference oscillator for timer
Built in
Security：
128-bit AES encryption
Serial date interfance
UART /I2C/ USB
EMC
Europe: ETSI EN 300 328 and EN 300 440 Class 2
USA: FCC CFR47 Part 15
Japan: ARIB STD-T66
Page：1/3
Shenzhen Ants IOT technology Co., Ltd
2.2 Module outline specifications
Pin No
Pin Name
3V3
GND
PWM1_R
PWM2_G
PWM3_B
PWM4_BR
PWM5_CT
GPIO 2/NC
Pin Type
Power supply
Ground
I/O(PWM output can be supported to
control Red color LED)
I/O(PWM output can be supported to
control Green color LED)
I/O(PWM output can be supported to
control Blue color LED)
I/O(PWM output can be supported to
control brightness of white LED)
I/O(PWM output can be supported to
control color temperature of warm
white color LED)
I/O
Description
1.9V to 3.6V
Configurable I/O Port(Or PWM output
port)
Configurable I/O Port(Or PWM output
port)
Configurable I/O Port(Or PWM output
port)
Configurable I/O Port(Or PWM output
port)
Configurable I/O Port(Or PWM output
port)
Configurable I/O Port
Page：1/4
Shenzhen Ants IOT technology Co., Ltd
Pin No
Pin Name
Pin Type
Description
RSTn_BP
Digital I/O
Reset BLE module by host
MCU,active low
RSTn_MCU
Digital I/O
Reset host MCU by BLE module,
active low
Sensor_in
Digital I/O
External sensor signal input
I2C_SDA
Digital I/O
I2C date
I2C_SCL
Digital I/O
I2C clock
USB_DM
Digital I/O
USC N for module
USB_DP
Digital I/O
USB P for module
+3V3
Power supply
BIAS
Microphone bias
10
MIC_IN
Microphone input signal
11
UART_TX
Digital I/O
UART_TXD
12
UART_RX
Digital I/O
UART_TXD
13
GND
Ground
Page：1/5
Shenzhen Ants IOT technology Co., Ltd
3. Module flash memory programming(in circuit)
Test point No for
programming
TP1
TP2
TP3
Signal name of test point
Description of test point
Diameter of test point
3V3
GND
SMS
+3.3V power supply
Ground
SMS
1.0mm
1.0mm
1.0mm
Page：1/6
Shenzhen Ants IOT technology Co., Ltd
FCC Warning:
If the FCC identification number is not visible when the module is installed inside another device, then the
outside of the device into which the module is installed must also display a label referring to the enclosed
module. This exterior label can use wording such as the following:
“Contains Transmitter Module FCC ID: 2AH7Z-MYBLE ”
when the module is installed inside another device, the user manual of this device must contain below
warning statements;
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired
operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
FCC statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
That separate approval is required for all other operating configurations, including portable configurations with respect to
Part 2.1093 and different antenna configurations.
This product is mounted inside of the end product only by professional installers OEM. They use this module with
changing the power and control signal setting by software of end product within the scope of this application. End user
can not change this setting.
The equipment complies with RF exposure limits. This module is limited to installation in mobile or fixed applications.
The antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your
body.
Page：1/7

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : Administrator
Create Date                     : 2016:05:19 20:06:09+08:00
Modify Date                     : 2016:05:24 15:54:43+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2016:05:24 15:54:43+08:00
Producer                        : Acrobat Distiller 11.0 (Windows)
Format                          : application/pdf
Title                           : R:\2016年3月\M蚂蚁雄兵\FCC 递交资料\Mesh?Bluetooth?Module?User?Manual.doc
Creator                         : Administrator
Document ID                     : uuid:7a98ee9e-a314-4296-9e5f-0ab797ce79c7
Instance ID                     : uuid:4e4feab1-db5b-4af1-a173-251a547b1caf
Page Count                      : 7

EXIF Metadata provided by EXIF.tools