Arcadyan Technology WA8001BAC 4x4 Video bridge User Manual

Arcadyan Technology Corporation 4x4 Video bridge

User Manual

Download: Arcadyan Technology WA8001BAC 4x4 Video bridge User Manual
Mirror Download [FCC.gov]Arcadyan Technology WA8001BAC 4x4 Video bridge User Manual
Document ID2569768
Application IDJcFnPBlGji+obdMffr5kyA==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize63.06kB (788207 bits)
Date Submitted2015-03-30 00:00:00
Date Available2015-03-31 00:00:00
Creation Date2017-10-10 03:18:49
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-10-10 03:18:49
Document TitleUser Manual
Document CreatorAcrobat PDFMaker 10.1 for Word
Document Author: acer

GXT542U Gigabit Wi-Fi Extender
QUICK INSTALL GUIDE
This guide will facilitate installation of the GXT 5G model
number GXT542U Gigabit Wi-Fi Extender which may be
configured as a:
Multicast (IPTV) Video Bridge Access Point (AP)
(Section 1)
Multicast (IPTV) Video Bridge Client (Section 2)
Gigabit Wi-Fi AP (Section 3)
Gigabit Wi-Fi Client (Section 4)
•
•
•
•
Prior to starting, ensure you have one each:
•
•
•
•
GXT542U unit
CAT5 Ethernet cable
Power adapter
Quick Installation Guide
MULTICAST (IPTV) VIDEO BRIDGE
INSTALLATION
Section 1
Multicast (IPTV) Video Bridge AP Installation
The initial GXT542U must be installed as an AP
Step 1 – Unit Mode Configuration
A. On the back of the device, set the unit mode switch to AP
(left position) as illustrated below.
Step 2 – Power and LEDs
A. Plug in the 12V A/C adapter and connect it to the GXT542U
AP. Verify the AP / STA LED is BLUE indicating AP mode.
Changing the mode from AP (Blue)
to Client or Station (STA) (Green)
requires a power cycle.
Step 3 – Placement and network connections
A. Place the GXT542U AP near the ONT/Residential Gateway
B.
Insert one end of an Ethernet cable into the Video LAN port
of the ONT/ RG with the other to the GXT542U’s RJ-45 port.
DO NOT connect both
Ethernet ports on the AP to the
same subnetwork ports on the
ONT/Gateway as this will
create a loop and disrupt
traffic.
Home Gateway or
Cable/DSL Modem
Section 2
Multicast (IPTV) Video Bridge Client Installation
After installing a GXT542U AP per Section 1, Clients can be added
using the steps below:
Step 1 – Unit Mode Configuration
A. Set the unit mode switch at the back of the unit to STA
(Right position) as illustrated below.
Step 2 - Power and LEDs
A. Plug in the 12V A/C adapter and connect it to the
GXT542U STA unit. Verify the AP / STA LED is GREEN
indicating Client (STA) mode.
Step 3 – Placement and network connections
A. Place the GXT542U Client near the Multicast Video Set-Top
Box (STB).
B. Insert the Ethernet cable into the STB and the other end into
one of the Ethernet ports of the GXT542U.
Step 4 – Pair the Client with theAP
A. Press the WPS button on the back of the GXT542U AP. The
WPS LED on the top front will flash for up to 2 minutes,
indicating it is ready for association with Clients.
WPS Button
B.
WPS LED
Within 2 minutes, press the WPS button on the GXT542U
Client. The WPS LED will continue flashing until associated
with the AP and stop at which time the WLAN LED will
illuminate.
Client
AP
The WLAN LED color indicates the receiver signal strength
(RSSI)
Green = Good, Blue = Fair, Red = Poor
Step 5 – Install the DVR and STBs
Congratulations. You have completed installation of a Gigabit Wi-Fi
Multicast IPTV link. Turn on any TV channel for visual verification of
the wireless connection quality.
Additional GXT542U clients can be paired to the AP
following the guideline in Section 2.
Step 6 – Verify the wireless performance
Access the Web User Interface to verify the wireless capacity for
watching and recording video.
A. Set all TV(s) to the highest resolution HD channels
B. Begin recording HD channels on the DVR (if installed)
C. Ensure the laptop Ethernet port is configured to a fixed IP
address of 10.0.0.50
D. Connect the PC to the AP via Ethernet, open a browser and
enter the AP’s default IP address http://10.0.0.2 to access the
GXT542U.
E. Login using user name: admin password: last 4 digits of the
MAC address (printed on the bottom of the device)
F. Click on the System Information on the left
G. Ensure the Free Air Time is GREEN
H. Select Video Station List
I. Verify all the RSSI levels are GREEN or BLUE
GIGABIT Wi-Fi INTERNET ACTIVATION AND
AP AND CLIENT INSTALLATION
Section 3
Activating the Gigabit Data Wi-Fi Network
By default, the GXT542U Internet Network and associated SSID are
not pre-configured.
Steps 1 and 2 – Refer to Section 1, Steps 1 and 2 instructions
on page 2 Multicast (IPTV) Video Bridge AP Installation.
When Multicast Video (IPTV) and
Internet Data originate on the SAME
ONT/ RG port, connect the single
Ethernet port to the GXT542U.
Home Gateway or
Cable/DSL Modem
If Multicast Video (IPTV) and Internet Data
originate on SEPARATE ONT / RG ports,
refer to the instructions on the attached
addendum Segregating Video & Internet
Ports. The 2 GE GXT542U ports are factory
bridged and need to be reconfigured to
segregate these traffic types and eliminate
the potential for IP related issues.
Step 3 – Activate the Internet Wi-Fi Network
To login to the web Interface to create the Data Wi-Fi network:
A. Follow Section 2, Step 6 C – E directions to access the AP
B.
C.
D.
web interface
Click on the Data Wireless Setup menu item on the left
Check the box and click Apply to enable the Data network
Confirm the screen displays the Data wireless network
Congratulations! You have activated and installed the Gigabit Wi-Fi
Internet network. Connect any 5 GHz 11ac or 11n device to the
Internet SSID using the passphrase below to access the internet.
e default passphrase for connecting to the Data Wi-Fi
Network is the last 8 digits of the AP’s MAC address printed
on the bottom.
SECTION 4
INSTALLING a Gigabit Wi-Fi Client
The GXT542U configured as a Client offers an ultra-high performance
Gigabit Wi-Fi connection to Gaming Consoles, SmartTVs and streaming
devices such as FireTV, Roku and Apple TV.
Steps 1 – 2
A. Follow the instructions outlined in Section 2, Steps 1 – 2
substituting the Smart TV, Gaming Console or streaming
device for the STB
Step 3 – Pairing the Client with theAP
A.
Follow the instructions below for pairing the Client to the
Data Wireless Network
By default, the WPS function is associated with the Video Network. To
change the WPS capability to the Data Wireless Network, login to the
WEB User Interface to set up the Data Wi-Fi network as the default
WPS SSID.
A.
B.
C.
D.
Follow Steps 1 -3 in Section 3
Click on the Data Wireless Setup menu item on the left
Check the WPS Default option and click Apply
Follow the pairing instructions in Section 2 Step 4 to pair the Client
with the AP
LED Guide
For Additional Help: Please consult the
troubleshooting section of the user manual if the Quick
Install Guide didn’t resolve your issue. For further
questions or personal assistance, email us or call us at:
support@airsonics.com
(800) 651-0175
ADDENDUM:
SEGREGATING VIDEO AND INTERNET PORTS
Step 1 – Extend the VLAN on the ONT / RG WAN port for the video
subnet to the video LAN port. For example, if 10 is the access video
network VLAN then enable and tag the video LAN port the same.
Step 2
A. Login to the AP at http://10.0.0.2 using a browser and user
name: admin password: last 4 digits of the MAC address
B. Click on the Video Wireless Setup
C. In the VLAN ID field, enter the VLAN which is tagged on
the video LAN port on the ONT/GW and click Apply
D. Click on the Switch Settings
E. Check the Block Traffic Between Ports option and click
Apply
F. Now you can connect the Video LAN port of the RG/ONT
to the Blue and the Internet LAN port to the Black GigE port
on the GXT542U, respectively.
10
FCC Statement:
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
● Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
This device and it's antennas(s) must not be co-located or operating in conjunction with
any other antenna or transmitter except in accordance with FCC multi-transmitter
product procedures.
This device is restricted for indoor use.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
20 cm between the radiator & your body.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : acer
Create Date                     : 2015:03:16 15:48:07+08:00
Modify Date                     : 2015:03:27 15:52:14+08:00
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2015:03:27 15:52:14+08:00
Creator Tool                    : Acrobat PDFMaker 10.1 for Word
Document ID                     : uuid:ef541c52-8684-4a68-b6f2-d5f4d1a193c5
Instance ID                     : uuid:630b5619-2465-4462-b55a-ac317cbcfad8
Subject                         : 2
Format                          : application/pdf
Creator                         : acer
Producer                        : Adobe PDF Library 10.0
Source Modified                 : D:20150316074457
Company                         : 
Created                         : D:20150212
Last Saved                      : D:20150213
Page Layout                     : OneColumn
Page Count                      : 11
EXIF Metadata provided by EXIF.tools
FCC ID Filing: RAXWA8001BAC

Navigation menu