Arts Digital Technology KS717 Wireless Microphone User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1770844
Application ID	T5RImCQoqHoQwcXru+GE+g==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	10.72kB (133949 bits)
Date Submitted	2012-08-21 00:00:00
Date Available	2012-08-21 00:00:00
Creation Date	2012-08-03 11:38:57
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2012-08-06 11:50:33
Document Title	Microsoft Word - KS717 - INSTRUCTION MANUAL _DRAFT_ 20120723.docx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

WIRELESS MICROPHONEINSTRUCTION MANUAL
INTRODUCTION
Thank you for purchasing this unit. Before trying to use it, be sure to read this instruction
manual carefully. Then keep this manual in a safe place so that you can refer to it whenever you
need to do so.
WHAT’S INCLUDED
1) Wireless Microphone X 1 pc
2) Receiver X 1 pc
3) Instruction Manual X 1 pc
BATTERY PRECAUTIONS
WARNING
 Batteries must be placed under adult supervision.
 Use only the size and type of batteries specified. The use of alkaline batteries is recommended.
 Do not use rechargeable batteries.
 Place batteries based on the polarity as indicated inside the battery compartment. Reversed battery
may cause damage to the device.
 DO NOT mix different types of batteries and DO NOT mix new and exhausted batteries.
 DO NOT charge non‐rechargeable batteries as they can be overheated and rupture.
 When not using the unit for a prolonged period of time, please remove the battery to avoid possible
damage caused by a leaking battery.
 DO NOT short circuit the supply terminals of the battery.
 Exhausted batteries must be removed from the product.
 DO NOT throw batteries into the fire. They may explode.
CONTROL LOCATION
MICROPHONE (HANDHELD TRANSMITTER)
Front
RECEIVER
SideBack
1)
2)
3)
4)
5)
Indicator Light
ON/OFF/STANDBY Switch
Battery Compartment
ON/OFF Switch
Indicator Light
Back
6) Battery Compartment
MICROPHONE SETTINGS
The switch on the Wireless Microphone has three settings:
1) ON – The switch is in the top position. The microphone will function. The red indicator light is on.
The microphone will use battery power.
2) STANDBY – The switch is in the middle position. The microphone will not function. The red
indicator light is on. The microphone will use battery power.
NOTE: The purpose of this setting is to maintain a connection between the microphone and the
receiver when moving around the area in which it is being used.
3) OFF – The switch is in the bottom position. The microphone will not function. The red indicator
light is off. The microphone will not use battery power.
Important Note:
When the microphone switch is set to OFF, noise may be generated from the karaoke machine. Please
make sure to reduce both the MASTER VOLUME and MIC VOLUME to the low level OR switch off the
receiver before turning off your microphone.
OPERATION
1) Insert one active DC 9‐Volt battery into the microphone (must follow the polarity engraved
inside the battery compartment) by unscrewing the cover of battery compartment.
2) Replace the battery compartment cover and tighten the screw.
3) Set the switch on the microphone to the STANDBY position.
4) Insert two active AAA batteries into the receiver (must follow the polarity engraved inside the
battery compartment) by unscrewing the cover of battery compartment.
5) Replace the battery compartment cover and tighten the screw.
6) Plug the receiver into the Microphone Input Jack of your karaoke machine.
7) Set the switch on your karaoke machine to the ON position.
8) Adjust the Master Volume and Mic Volume Controls of your karaoke machine to a comfortable
level.
9) Set the switch on the receiver to the ON position.
10) Set the switch on the microphone to the top ON position. Your Wireless Microphone is now
ready for use!
Microphone
Receiver
Note:
The receiver is provided with a flexible wire antenna. If the reception is weak, extend the antenna to
improve reception.
MAINTENANCE
1) To ensure long battery life, please make sure that both the Receiver and the Microphone are set
to the OFF position when not in use. To be absolutely certain, we advise you to remove all the
batteries from the Microphone and Receiver when they are not in use.
2) Please remove the Receiver from the Microphone Input Jack of your karaoke machine when not
in use. This will reduce the possibility of damage to the Receiver.
TROUBLESHOOTING
1) PROBLEM:The Microphone Indicator Light is on but there is no sound when I sing.
POINTS TO CHECK:
a) Is the Microphone Switch set to ON?
b) Is the Karaoke machine correctly plugged in and switched on?
c) Are the Microphone Volume and Master Volume controls of your karaoke machine set to a
high enough level?
d) Does the Receiver contain two AAA batteries? Is it properly connected to your karaoke
machine and is it turned on?
2) PROBLEM: The Receiver indicator light is on but there is no sound when I sing.
POINTS TO CHECK:
a) Is the Receiver properly connected to the karaoke machine?
b) Is the Microphone switch set to ON?
c) Does the Microphone contain one 9‐Volt battery?
d) Is the Karaoke machine correctly plugged in and switched on?
e) Are the Microphone Volume and Master Volume controls of the karaoke machine set to
high enough level?
3) PROBLEM: The karaoke machine I am using is switched on but there is no sound when I sing.
POINTS TO CHECK:
a) Is the Microphone Switch set to ON?
b) Does the Microphone contain one 9‐Volt battery?
c) Are the Microphone Volume and Master Volume controls of your karaoke machine set to a
high enough level?
d) Does the Receiver contain two AAA batteries? Is it properly connected to your karaoke
machine and is it turned on?
SPECIFICATIONS
TYPE
POWER SOURCE
MICROPHONE DIMENSION
RECEIVER DIMENSION
‐54 dB, 600 OHM
UNI‐DIRECTIONAL DYNAMIC MICROPHONE
9V Battery x 1 pc (Microphone)
AAA Battery x 2 pcs (Receiver)
23.8 X 5.0 X 5.0 cm
9.4 X 2.0 X 2.0 inches
12.5 X 4.2 X 2.2 cm
4.9 X 1.7 X 0.9 inches
WIRELESS MICROPHONE INFORMATION
Warning: Modifying, tampering with, or adjusting this unit, or replacing anytransmitter component
(crystal, semiconductor, etc.) may result in a violation of theFCC rules.
FCC NOTICE
This wireless microphone system complies with Part 90 of FCC Rules. There is onefrequency available for
the system. You must obtain a license for the frequency youplan to use before operating your system.
Visithttp://wireless.fcc.gov/uls/ or call your local FCC office to apply for your license. Yourability to
obtain a license will depend on how you plan to use the system.
For RF exposure
“IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, nochange to the
antenna or the device is permitted. Any change to the antenna or the devicecould result in the system
exceeding the RF exposure requirements.”
SAFETY INFORMATION
Your wireless microphone contains a low power transmitter. When the EUT ispower on and it sends out
radio frequency (RF) signals. In August 1996, the FederalCommunications Commissions (FCC) adopted RF
exposure guidelines with safetylevels for wireless devices.
IMPORTANT
To maintain compliance with the FCC’s RF exposure guidelines hold the transmitterand antenna at least
1 inch (2.5 centimeters) from your face and speak in a normalvoice, with the antenna pointed up and
away from the face. Ensure that the antennais at least 1 inch (2.5 centimeters) from your body when
you using your wirelessmicrophone.
Use only the supplied antenna. Unauthorized antennas, modifications, orattachments could damage the
transmitter and may violate FCC regulations.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : Administrator
Create Date                     : 2012:08:03 11:38:57+08:00
Modify Date                     : 2012:08:06 11:50:33+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2012:08:06 11:50:33+08:00
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Format                          : application/pdf
Title                           : Microsoft Word - KS717 - INSTRUCTION MANUAL _DRAFT_ 20120723.docx
Creator                         : Administrator
Document ID                     : uuid:aba88e7d-6119-4e29-9d49-8e3b1e42f549
Instance ID                     : uuid:c81defda-62a3-4afa-a65d-7ffaa62e6095
Page Count                      : 6

EXIF Metadata provided by EXIF.tools