Arts Electronics LPP1000 TURNTABLE AUDIO SYSTEM User Manual 3

Download:
Mirror Download [FCC.gov]
Document ID	2077155
Application ID	Ts2wm8AZUkx/BTZKLqcDOg==
Document Description	user manual 3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	142.6kB (1782456 bits)
Date Submitted	2013-09-19 00:00:00
Date Available	2013-09-19 00:00:00
Creation Date	2013-09-13 19:31:47
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2013-09-13 19:31:47
Document Title	user manual 3
Document Creator	Adobe InDesign CS6 (Macintosh)

3 Press the MEMORY button.
The selected track/file is added at the selected program number, replacing the file that was there.
Clearing all the program contents
When the contents of the program are cleared,
“PROGRAM CLEAR” scrolls across the display.
ENGLISH
Press and hold the stop (8) button for at least 2 seconds when stopped.
The contents of the program are cleared.
oo The program is also cleared in the following cases.
• The unit enters standby mode
• The PHONO/AUX, FM/AM or CD/Bluetooth button
is pressed, changing the source
• The disc tray is opened
37
LP-P1000_OM_EF_vA_CS6.indb 37
2013/09/11 16:16
Repeat and shuffle playback
oo You can also change the playback mode by pressing
the PLAY MODE button during playback.
oo Any of the following operations will end repeat or
shuffle playback mode.
When the CD function is active, press the PLAY MODE
button to cycle through the following playback modes.
When an audio CD is loaded
REPEAT (single track repeat)
REPEAT ALL (all track repeat)
SHUFFLE*
OFF (normal playback)
When an MP3/WMA disc is loaded
REPEAT (single file repeat)
REPEAT FOLDER
REPEAT ALL (all file repeat)
SHUFFLE*
• The stop (8) button is pressed
• The unit enters standby mode
• The PHONO/AUX, FM/AM or CD/Bluetooth button
is pressed, changing the source
• The disc tray is opened
Repeat playback
REPEAT (single track/file repeat)
During playback, press the PLAY MODE button once
to repeat playback of the currently playing track/file.
“REPEAT” appears on the display.
oo If you turn the main unit's skip (. // )
knob or press the remote control's skip/search
(.m/,/) buttons and select another
track/file, that track/file will be played repeatedly.
oo When stopped, press the PLAY MODE button and
then use the main unit's skip (.//) knob or
remote control's skip/search (.m/,/)
buttons to select a track/file. Press the play/pause
(y/9) button to start single repeat playback.
oo During programmed playback, the track/file being
played will be played repeatedly.
REPEAT ALL (all track/file repeat)
Press the PLAY MODE button twice (or three times for
an MP3/WMA disc).
“REPEAT ALL” appears on the display and repeat playback of all tracks/files starts.
oo During programmed playback, the programmed
tracks/files will be played repeatedly.
OFF (normal playback)
Press the play/pause (y/9) button when the mode
you want to select appears to start playback.
*If shuffle is selected, playback starts automatically.
38
LP-P1000_OM_EF_vA_CS6.indb 38
2013/09/11 16:16
About MP3/WMA files (1)
REPEAT FOLDER
(MP3/WMA discs only)
Press the PLAY MODE button twice.
“REPEAT FOLDER” appears on the display, and the files in
the selected folder are played back repeatedly.
Shuffle playback
All the tracks/files on the disc are played back randomly.
oo During shuffle playback, turn the main unit's skip
(/) knob right or press the remote control's skip/
search (,/) button to start playback of the
next random track/file.
Turn the main unit's skip (.) knob left or press the
remote control's skip/search (.m) button to
return to the beginning of the current track/file.
oo Shuffle playback is not possible during programmed
playback.
A disc that contains MP3/WMA files can have the files
in folders in the same manner that files are managed
on an ordinary computer. One folder can also contain
multiple subfolders.
Example of folder numbers and file playback
order ( 1 to 9 ) during normal playback of a disc
that contains MP3/WMA files
ENGLISH
SHUFFLE
Press the PLAY MODE button repeatedly until “SHUFFLE”
appears on the display.
File playback order
001
(ROOT)
001
“ROOT”
MP3/WMA file
MP3/WMA file
002 folder
MP3/WMA file
MP3/WMA file
004 folder
003 folder
MP3/WMA file
MP3/WMA file
MP3/WMA file
MP3/WMA file
MP3/WMA file
Folder
005 folder
oo Adding, removing or relocating files and folders could change the order shown in the above
illustration.
39
LP-P1000_OM_EF_vA_CS6.indb 39
2013/09/11 16:16
About MP3/WMA files (2)
Selecting folders and files
Changing the display
To select a folder by number, use the main unit's search
(m/,) buttons.
When using the remote, use the MP3 (j/k) buttons.
Each time you press the INFO button, the information
on the display changes as follows.
oo The first 32 characters of the song/artist/album
names are shown.
oo If the file information uses Japanese, Chinese or
other double-byte characters, playback is possible
but information will not be shown correctly on the
display.
oo After each item of information scrolls across three
times, the elapsed playback time will appear again.
oo When a WMA disc is loaded, “WMA” will appear on
the left side of the display.
To select a file by number, use the main unit's scroll
(MULTI JOG) knob.
oo After selecting the folder/file number, press the play/
pause (y/9) button to start playback.
If the play button is not pressed within 5 seconds,
“STOP” will appear on the display.
40
LP-P1000_OM_EF_vA_CS6.indb 40
2013/09/11 16:16
Display example
Title name
Track number
Playback elapsed time
ENGLISH
Album name
File name
Artist name
Folder name
41
LP-P1000_OM_EF_vA_CS6.indb 41
2013/09/11 16:16
Listening to audio from a Bluetooth device
With this unit, you can enjoy listening to music played
back on another Bluetooth device wirelessly.
When connection with a Bluetooth device succeeds,
the Bluetooth icon ( ) appears and “BLUETOOTH”
scrolls across the display.
1 Press the CD/Bluetooth button to select
“Bluetooth”.
Bluetooth figure mark
After “BLUETOOTH” scrolls across 5 times, the current
time is shown.
“PAIRING” appears on the display, and the unit
searches for paired devices.
oo The unit will automatically try to connect to the
previously connected device.
oo If it cannot connect for two minutes or longer,
“NO DEVICE CONNECTED” will scroll across the
display.
oo Press the CD/Bluetooth button to select “Bluetooth”
(the Bluetooth indicator lights).
oo Pairing is necessary before using the Bluetooth
function of this unit for the first time and when
you want to connect a new Bluetooth device.
oo If connection fails, confirm that the other
Bluetooth device is able to make a Bluetooth
connection.
oo If the connection is broken during use, “NO
DEVICE CONNECTED” scrolls across this unit's display. Conduct the connection operations again
on this unit and the other Bluetooth device.
42
LP-P1000_OM_EF_vA_CS6.indb 42
2013/09/11 16:16
2 Operate the Bluetooth device to start
playback.
If the connected Bluetooth device supports AVRCP,
you can use this unit or the remote control to play,
pause or stop audio on that device.
Depending on the Bluetooth device being used,
remote control operation might not be supported
or actual operations might differ.
Unpairing a device
To unpair with a connected Bluetooth device, press the
PAIRING button.
oo If you later want to use a Bluetooth connection with
that Bluetooth device, you must pair them again.
oo This deletes all pairing information. Unpairing with
just one device is not possible.
oo The volume, however, cannot be adjusted
remotely.
ENGLISH
Audio/Video Remote Control Profile (AVRCP)
To control playback of a Bluetooth device, the
Bluetooth device must support AVRCP.
Some Bluetooth devices, however, have different functions depending on their specifications.
oo Depending on the Bluetooth device, skipping
tracks might not be possible using this unit’s skip
(.//) knob. In this case, use this unit’s search
(m/,) buttons.
oo If you cannot control another Bluetooth device with
this unit, operate the other Bluetooth device directly.
43
LP-P1000_OM_EF_vA_CS6.indb 43
2013/09/11 16:16
Pairing with another Bluetooth device
Pairing is necessary before using the Bluetooth function
of this unit for the first time and when you want to connect a new Bluetooth device.
Follow these procedures to pair the unit with the other
device.
If it cannot connect for two minutes or longer, “NO
DEVICE CONNECTED” will scroll across the display.
To begin pairing from this state, press the PAIRING
button to put the unit into pairing mode. “PAIRING”
appears on the display.
Pairing
1 Press the CD/Bluetooth button to select
“Bluetooth”.
After “BLUETOOTH” scrolls across the display,
“PAIRING” appears, showing that the unit is ready to
be paired with another device.
Bluetooth indicator
2 Enable the Bluetooth communication
function on the other Bluetooth device.
44
LP-P1000_OM_EF_vA_CS6.indb 44
2013/09/11 16:16
Listening to records (1)
3 From the Bluetooth device select
“LP-P1000” (this unit).
oo If a passkey is required during pairing, input
“0000”.
When connection succeeds, the unit will make an
electronic beeping sound, and the Bluetooth figure
mark ( ) will appear on the display.
1 Press the PHONO/AUX button to select
“PHONO”.
ENGLISH
oo If it cannot connect for two minutes or longer, “NO
DEVICE CONNECTED” will scroll across the display
and pairing mode will end.
oo This unit can retain pairing data for up to 5 devices.
After 5 devices have been paired, if a new device is
paired, the oldest pairing will be overwritten.
oo When a Bluetooth device is connected, if you
change the input with a function button or press the
STANDBY/ON button to put the unit into standby
mode, the next time the unit is turned on, the last
connected Bluetooth device will automatically
connect again assuming it is in range and has its
Bluetooth function activated.
oo If you disconnect from the other Bluetooth device,
“NO DEVICE CONNECTED” will appear.
oo If the other Bluetooth device is waiting to pair, pairing will occur automatically when this unit enters
pairing mode.
Before using the record player, use a coin or other tool
to turn the transport locking screw clockwise until it
stops. Remove the stylus cover (made of white plastic)
(page 23).
Each time the PHONO/AUX button is pressed,
PHONO (record) and AUX (external component) are
selected alternatively.
2 Open the turntable cover slowly.
VV B
 e careful not to pinch your hand, for example, when closing the turntable cover.
Continued on the next page
LP-P1000_OM_EF_vA_CS6.indb 45
45
2013/09/11 16:16
Listening to records (2)
3 Place a record on the turntable.
When playing a 45 RPM large-hole single record,
use the included adapter.
6 Lift the cue lever to raise the tone arm.
Tone arm
Cue lever
4 Set according to the rotation speed
(RPM) of the record.
The rotation speed can be set to one of three
options: 33 1/3, 45 or 78.
oo You can also leave the cue lever down and move
the raised tone arm over the record and then
lower the tone arm slowly to start playback.
7 Move the tone arm to the edge of the
record or the track where you want to
start playback.
When you move the tone arm toward the record,
the turntable will begin to turn.
5 Move the tone arm clasp to the right to
release the tone arm.
Clasp
46
LP-P1000_OM_EF_vA_CS6.indb 46
2013/09/11 16:16
8 Slowly lower the cue lever to slowly
lower the tone arm.
Tone arm
When playback finishes
When the end of the record is reached, the tone arm
automatically returns to the tone arm holder and turntable rotation stops (auto return function).
oo To stop playback manually, slightly lift the tone arm
using the cue lever or a finger and return the tone
arm to the tone arm holder.
Tone arm
oo During record playback, you can close the turntable cover to avoid dust.
VV Do not place anything on the turntable cover.
Objects on the cover might cause noise due
to vibrations or fall off, especially during
playback.
ENGLISH
Cue lever
Cue lever
During record playback, feedback could occur if
the volume is too loud. If this happens, turn the
VOLUME knob left to lower the volume.
The auto return function might not work
depending on the record. In that case, move the
tone arm back to its original position manually.
47
LP-P1000_OM_EF_vA_CS6.indb 47
2013/09/11 16:16
Listening to the radio
Press the FM/AM button to select FM or AM band.
When using the main unit
Automatic station selection
Press a j/k button repeatedly until the frequency
begins to change. After the frequency starts changing, stop pressing the button to start automatic station
selection.
When using the main unit
When using the remote control
When using the remote control
FM radio reception example
oo “SEARCH” appears on the display until the station is
found.
Display example
AM radio reception example
oo When a radio station is received, automatic station
selection ends.
oo To cancel automatic station selection, press a j/k
button again.
oo If the reception is poor or the antenna is disconnected, “PLEASE CHECK ANTENNA” scrolls across on
the display. Check the antenna position and connection and then try the operation again.
48
LP-P1000_OM_EF_vA_CS6.indb 48
2013/09/11 16:16

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Modify Date                     : 2013:09:13 19:31:47+08:00
Create Date                     : 2013:09:13 19:31:47+08:00
Metadata Date                   : 2013:09:13 19:31:47+08:00
Creator Tool                    : Adobe InDesign CS6 (Macintosh)
Format                          : application/pdf
Document ID                     : uuid:381e4938-b4c0-46db-9565-4d8c714aaef0
Instance ID                     : uuid:2a1dadd0-dbcc-4caf-bc85-1cd18d1ba43a
Producer                        : Adobe PDF Library 10.0.1
Page Count                      : 12
Creator                         : Adobe InDesign CS6 (Macintosh)

EXIF Metadata provided by EXIF.tools