Asiana IDT ABT-S100 Bluetooth Headset User Manual S 100 0619

Asiana IDT,INC. Bluetooth Headset S 100 0619

User Manual

For wireless communicationFor listening to high quality soundFor convenient lifeStereo Headsetwww.earomix.comPrinted Ver 2007-03 earomix ABT-S100 Copyrightsⓒ2007 ASIANA IDT, Inc.Free From Wired...User guideearomixABT-S100
•Button controls*Short Key : 0.5 Second (Tapping Button) •Long Key : Over 3 SecondsBluetooth Stereo Headsetearomix ABT-S100User Guide031.Getting Started•Package contents •Features02Headset USB Charging Cable User GuideButton Before state Press time After stateAnswer buttonStandby ShortVoice DialingCancel Voice DialingNew Dialing (On mobile phone)Cancel callingLast number RedialingCall indication Short Accept a CallLong Reject a CallTalking Short End a CallLong Call Transfer (Headset / Mobile phone)▶/ ■Play·Pause·StopbuttonConnectable Short Connect RequestLong PairableDeep Sleep Mode Long ConnectableStandby Short PlayLong Disconnect RequestPlay/Pause Short Pause/PlayLong StopPlay/Pause/Stop Short Previous/Next TrackLong Rewind/Fast Forward-Volume Down buttonPlay/Pause/Stop Short Volume DownTalking Short Volume DownLong Mic Mute On/OffPlay/Pause/Stop Short Volume UpTalking Short Volume Up++-Long Power On/OffI◀◀+ ▶▶IStandby Long Battery Status CheckI◀◀ /▶▶IPrevious Track / Next Track+Volume Up buttonLong
•Indicator LightsBluetooth Stereo Headsetearomix ABT-S100User Guide05•Charging This headset has its own battery in it. The internal battery must be fully charged beforeusing for the first time.With the USB cable, one end goes in the USB port on the computer and the other andgoes in the socket on the headset as shown in the picture below.Full charge of the headset takes approximately 2 hours. Beep sound is generated every30 seconds when the battery is low and the power goes off automatically after approxi-mately 3 minutes. •Charging and Operating time04Charging time Operating timeTalk Standby Music2 hours 7 hours 120 hours 6 hoursCharging in progress Red indicator onCharging completed Red indicator offBattery Status CheckRemaining battery capacity 5~20% Red flashes three timesRemaining battery capacity 20~80% Blue flashes three timesRemaining battery capacity 80~100% Red and Blue flash simul-taneously three timesConnectable state Red flashes every 2 secondsPairable state Red and Blue flash alternativelyBluetooth Device connectedto Headset Blue flash every 5 seconds[Notes] •earomix ABT-S100 headset must be fully charged before using it for the first time.•Use only the USB charging cable provided with the product. •Using unauthorized USB charging cable may lead to the headset failure.•Operating the headset is not recommended while being charged, If you wish to answer theincoming call, while the headset is being charged, separate the charging cable completelybefore use.•Press and hold down both I◀◀and ▶▶I at the same time for 3 seconds to check batteryremaining. It may not function correctly, if the buttons are not pressed as instructed.
Bluetooth Stereo Headsetearomix ABT-S100User Guide07•WearingWear the headset as shown in the picture below.•StoringTurn the power off before safety storing it.06Press the hanger withfinger softly to broadenit for easy wearing.Red flashes every2 secondsRed and Blue flashalternativelyRed flashes continuouslyBlue flashes every 5seconds1. Connectable state 2. Pairable state3. Connecting state 4. Connected statePairing( Page 9)Connecting(Page 11)2.Pairing and connecting See the following illustration for pairing and connecting devices. [Notes] The microphone is incorporated into the cable which connects the stereo headset.[Caution] •Do not keep it in a place with the temperature below 0°C(32°F) or above 40°C(104°F), underthe direct sunshine or in a car which is hot heated by a sunshine.•Keep headset or other parts in a dry place.
Bluetooth Stereo Headsetearomix ABT-S100User Guide0908•PoweringWhen the headset is switched on, the headset is put in the connectable state that otherdevice can be either paired or connected. In order to use with a mobile phone or otherdevice, please pair or connect the headset to the mobile phone or the device.1) Power OnPress and hold down both and ++at the same timefor 3 seconds.Red indicator light flashes three times and a high pitchbeep is heard two times.2) Power OffPress and hold down both and ++at the same timefor 3 seconds.Blue indicator light flashes two times with single highpitch beep.•PairingPair earomix ABT-S100 headset with mobile phone or other Bluetooth enabled devicebefore using it. Paring is a process establishing a new relationship between twoBluetooth enabled devices. [Notes] The headset must be fully charged before using it for the first time. ❶Put the headset in pairable state.Switch the headset on. When the headset is switched on, it flashes Red every 2 seconds.Press and hold down ▶/ ■until Red and Blue indicatorlights flash in turn. (Approx. 3 seconds)[Notes] •If the headset is not paired within 3 minutes after going into the pairable state, it returns tothe connectable state. In this case, the indicator light flashes Red every 2 seconds. Press andhold down ▶/ ■for 3 seconds to make it in the pairable state again. •Please put the headset and the device you wish to pair with closely.
Bluetooth Stereo Headsetearomix ABT-S100User Guide1110[Notes] Passkey or PIN is a code that you enter on your mobile phone topair it with your headset. This makes your phone and the headsetrecognize each other and automatically work together.❷Search earomix ABT-S100 headset according to theuser guide of the Bluetooth device.In most cases, select ‘set’, ‘connection’ from the menu tosearch the Bluetooth device or select the option for add.❸Select earomix ABT-S100 headset from the list of founddevices.If there is any question of whether the headset is to bepaired or not, press ‘yes’ or ‘confirm’. If the passkey (or PIN)is required on the screen, enter ‘0000’ (four 0’s) as the pass-word of headset.❹The indicator light flashes Blue when paired successfully.•ConnectingIf the device has been paired before, just tapping ▶/ ■gives the re-establishment of connection between the headset and the paired device.•Multi Pairing (Pairing second Bluetooth enabled device)Bluetooth has been originally designed to have one Bluetooth enabled device paired at atime. If other device is to be connected to your headset, it firstly disconnects the currentlypaired device from headset and makes other device connected to the headset.However, ABT-S100 can be paired with two devices simultaneously. So, if either of them isto be connected to the headset, just make a connection with the device you wish to use. [Notes] •The headset is on the connectable state once it is turned on. (Red flash every 2 seconds) If it isnot connected to other device within 3 minutes in the connectable state, the headset goesinto Deep Sleep mode.In order to establish the connection, press and hold down ▶/ ■for 3 seconds or turn thepower on again and start it again.•DisconnectionThe connection currently established with the device can be disconnected by pressing andholding down ▶/ ■for 3 seconds (standby state). * Please stop music first, if music is being played.•For detailed information on the connecting, see the user guide of mobile phone or otherdevice. Time for making connection with the headset may vary from device to device.[Notes] •The device which is paired with headset first between mobile phone and other device will beused in mobile phone communication.For detailed information on the multi pairing, see the user guide of mobile phone or other device.
Bluetooth Stereo Headsetearomix ABT-S100User Guide13123.Functions•Standby mode1) Accept a call- Accepting a call in the standby modeFor an incoming call, press on the headset in a short time.- Accepting a call during music streamingFor an incoming call, during the music playing, the music stops and the bell rings. At this time, press shortly to connect the call.If 2 ~ 4 seconds pass after the call finishes, the music resume playing without any additional operation.2) End a callPress to disconnect a call.3) Reject a call * Press and hold down for 3 seconds to reject a call while the bell rings. 4) Make a call- New Dialing (On mobile phone)Enter the phone number you wish to call on the mobile phone and press on theheadset.*It is possible only when the mobile phone supports the call rejection function and the headset is paired withmobile phone as hands-free service or stereo headset service. It can be transmitted as a voice mail or the signalindicating that the line is busy.[Notes] The headset cannot be activated, if send button on the mobile phone is applied after entering thephone number. Press and hold down on the headset for 3 seconds to activate to the headset.- Last number RedialingPress and hold down for 3 seconds. At this time, the last numbers are listed onthe mobile phone, may vary depending on the type of mobile phone. And press button once.- Voice Dialing *Press and hold down shortly and say the name. To cancel voice dialing feature,please tap shortly. This may not work correctly, please see the user guide of mobilephone.•Talk modeFunctions during talking (talk mode) may not be working as intended for some mobilephones.1) Adjust volumePress ++or --shortly to control the volume during calling during talking.2) Mic Mute On/OffPress and hold down --for 3 seconds for the caller not to hear my voice. Press and hold down --for 3 seconds to reset it. *This function is available only when the mobile phone supports the voice recognition and the headset ispaired with as handsfree service or stereo headset service. For details, see the user guide of mobile phone.[Notes] Some mobile phones do not list the last phone numbers but makes a direct call to the number.
Bluetooth Stereo Headsetearomix ABT-S100User Guide1514•Music streaming mode2) Call transferIf the call is transferred from mobile phone to headset, Press and hold down for 3 seconds. (This also applied when the call is to be transferred from headset to mobilephone.)[Notes] •That applies only when the connected device supports the Bluetooth Audio Remote ControlProfile (AVRCP). See the glossary on Page 19 for more information. •Some mobile phone may play only MP3 files. In this case, make sure that the stored music is inMP3 format.•Holding the ▶/ ■more than 4 seconds may lead to disconnection between the headset withsome mobile phones.Play/Pause Press ▶/ ■shortlyStop Press▶/ ■longPrevious Track / Next Track Press I◀◀ / ▶▶IshortlyRewind / Fast Forward down I◀◀ / ▶▶Iapprox. 3 seconds and release to resumeAdjusting Volume Press --//++shortly[Notes] Some mobile phones do not support call transfer function. Please see the mobile phones’user guide for details.•Headset Controls*Short Key : 0.5 Second (Tapping Button) •Long Key : Over 3 SecondsPairing modePower On -+++Long High-pitch Beep (twice)Flashing Red every 2 secondsPower Off Don’t care+++Long High-pitch Beep Flashing Blue two timesParing Mode-Enter(Pairable) Connectable▶//■■Long Low-pitch Beep(twice)Flashing Red and BluealternativelyReconnect Connectable▶//■■Short Low-pitch Beep (twice slowly)Flashing Blue every 5 secondsDisconnect(Disconnectable Request) Standby▶//■■Long No tone Flashing Red every 2 secondsQuit Deep Sleep Mode Deep Sleep Mode▶//■■Long No tone Flashing Red every 2 sec-ondsBattery Status Check StandbyI◀◀+ ▶▶ILong No tone Depends on Battery status(5 page)Music streaming modePlay/Pause Pause/Play▶//■■Short No toneStop Play/Pause▶//■■Long No tonePrevious/Next Track Play/Pause/StopI◀◀//▶▶IShort No toneRewind/Fast Forward Play/Pause/StopI◀◀//▶▶ILong No toneAdjust Volume Play/Pause/Stop/Talking++//--Short No toneStandby modeAccept a Call Call indication Short No tone Flashing Blue every 2 secondsReject a Call Call indication Long High-pitch BeepVoice Dialing Standby Short No toneLast number Redialing Standby Long No toneTalk modeEnd a call Talking Short High-pitch BeepMic Mute On/Off Talking-Long No toneCall Transfer(Headset/Mobile phone) Talking Long No toneFunction Before state Button Definition Sound Effect Indicator LightButton Press Time
Bluetooth Stereo Headsetearomix ABT-S100User Guide17164.Appendix•Troubleshooting1) In case the sound is disconnected.•As the Bluetooth is a wireless technology, it is sensitive to object located between head-set and connected device. Even when there is not big object such as well, the distancebetween headset and the device shall not exceed 10m(33 feet).•Keep the cordless telephone or wireless network device away from the headset andmobile phone as they make noises or electronic wave.•The electronic wave is in unstable status. Move the headset and mobile phone nearer.2) No sound at all.•Check the volume of headset.•Check if the headset is paired with playing device.•Check if the blue indicator light on Call flashes every 5 seconds. If it keeps not working,then, make sure that it is connected to mobile phone or other device. •Despite repowering the headset, if it keeps occurring, press the reset hole on the side ofright earphone to initialize the product.3) In case the pairing does not work.•The pairing might have been deleted from the mobile phone. Pair it again as instructedon page 9.4) In case other device such as PC or MP3 player does not conduct stereostreaming.•Check if the device supports Bluetooth Version 1.2 or 2.0 and it has the Advanced AudioDistribution Profile(A2DP). It can work only when these conditions are met. See the userguide of the device for pairing.5) In case the stereo is played but the music control button does not work.•Make sure that the connected device supports the Audio/Video Remote ControlProfile(AVRCP).6) In case rejecting call, last number redialing, voice dial does not work.•It works only when the mobile phone supports the above functions and the headset ispaired with mobile phone as handsfree service or stereo headset service.7) In case the talk time of battery is different from described in the user guide.•As the battery for this product is consumable, its use time gets shorter as the battery isused.•The battery time also gets shorter when the headset is placed in hot or low temperature.•The warranty for the battery is 6 months. If you want to replace the battery, visit the cus-tomer center.•The life of battery depends on the environment of use.
Bluetooth Stereo Headsetearomix ABT-S100User Guide1918•Safety Notes1) Cautions1. Keep it away from heating sources as it may explode.2. Do not drop it or give a strong shock to it. It could be damaged or its life can be shortened.3. Do not disassemble or repair the product without permission. Contact the store orcustomer service center for repair.4. In case the product is put into water or wet, turn the power off and contact the storeor customer service center for repair.5. Do not use the chemical products for cleaning the product.6. USB charging cable is to be provided by the manufacturer or one of the approved ones.7. Keep it in a dry place with room temperature for long term storage. 8. If any medical equipments are used, make sure that the product is well protectedfrom electric wave. If necessary, get the help from medical doctor. 9. The product is compliant with Bluetooth version 2.0 Class 2 specifications. For theinformation on compatibility, contact the manufacturer of the applicable device orour customer service center.10. Some countries may prohibit driver from wearing the headset on two ears at thesame time during driving. Comply with the laws and regulations related to the use ofmobile phone during driving.11. Do not keep the headset in high volume for a long period of time, It can damage your ear.2) Disclaimer1. The manufacturer, store and distributor do not take any responsibilities from losses ordamages which occur due to accident or user’s error.2. The user’s manual is completed based on the current specification of the product.3. The specification and use of the product is subject to change for performanceimprovement without prior notice.•Glossary1. Bluetooth wireless technologyBluetooth is a radio technology that connects devices, such as mobile phones andheadsets, without wires or cords over a short distance (approx. 33 feet).For details, visit our website (www.earomix.com)2. Bluetooth ProfilesBluetooth profiles are general behaviors through which Bluetooth enabled devicescommunicate with other devices. Bluetooth phones support different sets of profiles -most support the headset profile but some support the hands-free profile and otherssupport both profiles. In order to support a certain profile, a phone manufacturer has toimplement certain mandatory features within the phone's software.3. Advanced Audio Distribution Profile (A2DP) A2DP(Advanced Audio Distribution Profile) is a Bluetooth Profile that enables stereosound. Both the headset and the device it connects to must support A2DP in order tohear A2DP sound in the headset.4. Audio/Video Remote Control Profile (AVRCP) AVRCP (Audio Video Remote Control Profile) is a Bluetooth profile that enables remotecontrol of the device that the headset is connected to. Both the headset and the deviceit connects to must support AVRCP in order for AVRCP to work. HSP (Headset Profile)HFP (Hands-free Profile)Bluetooth Profile that place and receive callsfor a hands-free device.A2DP (Advanced Audio Distribution Profile)AVRC (Audio/Video Remote Control Profile) Bluetooth Profile that enables stereo sound
Bluetooth Stereo Headsetearomix ABT-S100User Guide215. PairingThe process of establishing a new relationship between two Bluetooth enableddevices. During this process a link key is exchanged (either before connection estab-lishment was requested or during connecting phase).6. Pairable stateIt is the state that the headset is ready to be paired to mobile phones or otherBluetooth enabled devices. (The headset must be paired to the devices you wish to usewith before use.)7. Connectable stateIt is the state that the headset is in waiting to be connected with pre-paired Bluetoothenabled devices.8. Standby state When the headset/speakerphone is passively waiting for a call. When you “end” a call,the headset/speakerphone will go into standby state.9. Deep Sleep modeIf the headset (in connectable state) is not connected within 3 minutes, it goes intodeep sleep mode in order to minimize the battery consumption.•Specification20Bluetooth Compliance Bluetooth version 2.0Supported Profiles Headset and Hands-free, A2DP, AVRCPFrequency Band 2,402~2,480 MHzOutput Power Max 0 dBmOperating Range Up to 10 m (33 feet)Talk Time Up to 7 hours Music Time Up to 6 hoursStandby Time Up to 120 hoursBattery Type Rechargeable Lithium Polymer (3.7V/250mAh)Charging Methods USB charging cableCharging Time Approximately 2 hoursDimensions ф36 (Diameter) * 15 (H) mmWeight 40gOperating Temperature -10 ~ +50℃* May vary depending on use environment and operation.
Bluetooth Stereo Headsetearomix ABT-S100User Guide2322ⓒ2006 earomix, Asiana IDT Inc. All rights reserved. earomixⓇis a registered trademark, ofAsiana IDT Inc. All other trademarks included herein are the property of their respective owners.Gwanghwamun Building 12F.211 Sejongno, Jongro-gu, Seoul, Korea (110-730) Phone : (82-2) 2127-8340 Thank you very much for purchasing Bluetooth mono headset earomix ABT-S100.Please visit our website (www.earomix.com) for more details and services.•FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:1. This device may not cause harmful interference, and2. This device must accept any interference received, including interference that maycause undesired operation.

Navigation menu