Asiana IDT ABT-S100 Bluetooth Headset User Manual S 100 0619
Asiana IDT,INC. Bluetooth Headset S 100 0619
User Manual
For wireless communication
For listening to high quality sound
For convenient life
Stereo Headset
www.earomix.com
Printed Ver 2007-03 earomix ABT-S100 Copyrightsⓒ2007 ASIANA IDT, Inc.
Free From Wired...
User guide
earomix
ABT-S100
•Button controls
*Short Key : 0.5 Second (Tapping Button)
•
Long Key : Over 3 Seconds
Bluetooth Stereo Headset
earomix ABT-S100
User Guide
03
1.Getting Started
•Package contents
•Features
02
Headset USB Charging Cable User Guide
Button Before state Press time After state
Answer button
Standby Short
Voice Dialing
Cancel Voice Dialing
New Dialing (On mobile phone)
Cancel calling
Last number Redialing
Call indication Short Accept a Call
Long Reject a Call
Talking Short End a Call
Long Call Transfer (Headset / Mobile phone)
▶/ ■
Play·Pause·Stop
button
Connectable Short Connect Request
Long Pairable
Deep Sleep Mode Long Connectable
Standby Short Play
Long Disconnect Request
Play/Pause Short Pause/Play
Long Stop
Play/Pause/Stop Short Previous/Next Track
Long Rewind/Fast Forward
-
Volume Down button
Play/Pause/Stop Short Volume Down
Talking Short Volume Down
Long Mic Mute On/Off
Play/Pause/Stop Short Volume Up
Talking Short Volume Up
++-Long Power On/Off
I◀◀
+
▶▶I
Standby Long Battery Status Check
I◀◀ /▶▶I
Previous Track / Next Track
+
Volume Up button
Long
•Indicator Lights
Bluetooth Stereo Headset
earomix ABT-S100
User Guide
05
•Charging
This headset has its own battery in it. The internal battery must be fully charged before
using for the first time.
With the USB cable, one end goes in the USB port on the computer and the other and
goes in the socket on the headset as shown in the picture below.
Full charge of the headset takes approximately 2 hours. Beep sound is generated every
30 seconds when the battery is low and the power goes off automatically after approxi-
mately 3 minutes.
•Charging and Operating time
04
Charging time Operating time
Talk Standby Music
2 hours 7 hours 120 hours 6 hours
Charging in progress Red indicator on
Charging completed Red indicator off
Battery Status Check
Remaining battery capacity 5~20% Red flashes three times
Remaining battery capacity 20~80% Blue flashes three times
Remaining battery capacity 80~100% Red and Blue flash simul-
taneously three times
Connectable state Red flashes every 2 seconds
Pairable state Red and Blue flash alternatively
Bluetooth Device connected
to Headset Blue flash every 5 seconds
[Notes]
•
earomix ABT-S100 headset must be fully charged before using it for the first time.
•
Use only the USB charging cable provided with the product.
•
Using unauthorized USB charging cable may lead to the headset failure.
•
Operating the headset is not recommended while being charged, If you wish to answer the
incoming call, while the headset is being charged, separate the charging cable completely
before use.
•
Press and hold down both
I◀◀
and
▶▶I
at the same time for 3 seconds to check battery
remaining. It may not function correctly, if the buttons are not pressed as instructed.
Bluetooth Stereo Headset
earomix ABT-S100
User Guide
07
•Wearing
Wear the headset as shown in the picture below.
•Storing
Turn the power off before safety storing it.
06
Press the hanger with
finger softly to broaden
it for easy wearing.
Red flashes every
2 seconds
Red and Blue flash
alternatively
Red flashes
continuously
Blue flashes every 5
seconds
1. Connectable state 2. Pairable state
3. Connecting state 4. Connected state
Pairing
( Page 9)
Connecting
(Page 11)
2.Pairing and connecting
See the following illustration for pairing and connecting devices.
[Notes]
The microphone is incorporated into the cable which connects the stereo headset.
[Caution]
•
Do not keep it in a place with the temperature below 0°C(32°F) or above 40°C(104°F), under
the direct sunshine or in a car which is hot heated by a sunshine.
•
Keep headset or other parts in a dry place.
Bluetooth Stereo Headset
earomix ABT-S100
User Guide
0908
•Powering
When the headset is switched on, the headset is put in the connectable state that other
device can be either paired or connected. In order to use with a mobile phone or other
device, please pair or connect the headset to the mobile phone or the device.
1) Power On
Press and hold down both and
++
at the same time
for 3 seconds.
Red indicator light flashes three times and a high pitch
beep is heard two times.
2) Power Off
Press and hold down both and
++
at the same time
for 3 seconds.
Blue indicator light flashes two times with single high
pitch beep.
•Pairing
Pair earomix ABT-S100 headset with mobile phone or other Bluetooth enabled device
before using it. Paring is a process establishing a new relationship between two
Bluetooth enabled devices.
[Notes]
The headset must be fully charged before using it for the first time.
❶
Put the headset in pairable state.
Switch the headset on.
When the headset is switched on, it flashes Red every
2 seconds.
Press and hold down
▶/ ■
until Red and Blue indicator
lights flash in turn. (Approx. 3 seconds)
[Notes]
•
If the headset is not paired within 3 minutes after going into the pairable state, it returns to
the connectable state. In this case, the indicator light flashes Red every 2 seconds. Press and
hold down
▶/ ■
for 3 seconds to make it in the pairable state again.
•
Please put the headset and the device you wish to pair with closely.
Bluetooth Stereo Headset
earomix ABT-S100
User Guide
1110
[Notes]
Passkey or PIN is a code that you enter on your mobile phone to
pair it with your headset. This makes your phone and the headset
recognize each other and automatically work together.
❷
Search earomix ABT-S100 headset according to the
user guide of the Bluetooth device.
In most cases, select ‘set’, ‘connection’ from the menu to
search the Bluetooth device or select the option for add.
❸
Select earomix ABT-S100 headset from the list of found
devices.
If there is any question of whether the headset is to be
paired or not, press ‘yes’ or ‘confirm’. If the passkey (or PIN)
is required on the screen, enter ‘0000’ (four 0’s) as the pass-
word of headset.
❹
The indicator light flashes Blue when paired successfully.
•Connecting
If the device has been paired before, just tapping
▶/ ■
gives the re-establishment of
connection between the headset and the paired device.
•Multi Pairing (Pairing second Bluetooth enabled device)
Bluetooth has been originally designed to have one Bluetooth enabled device paired at a
time. If other device is to be connected to your headset, it firstly disconnects the currently
paired device from headset and makes other device connected to the headset.
However, ABT-S100 can be paired with two devices simultaneously. So, if either of them is
to be connected to the headset, just make a connection with the device you wish to use.
[Notes]
•
The headset is on the connectable state once it is turned on. (Red flash every 2 seconds) If it is
not connected to other device within 3 minutes in the connectable state, the headset goes
into Deep Sleep mode.
In order to establish the connection, press and hold down
▶/ ■
for 3 seconds or turn the
power on again and start it again.
•
Disconnection
The connection currently established with the device can be disconnected by pressing and
holding down
▶/ ■
for 3 seconds (standby state).
* Please stop music first, if music is being played.
•
For detailed information on the connecting, see the user guide of mobile phone or other
device. Time for making connection with the headset may vary from device to device.
[Notes]
•
The device which is paired with headset first between mobile phone and other device will be
used in mobile phone communication.
For detailed information on the multi pairing, see the user guide of mobile phone or other device.
Bluetooth Stereo Headset
earomix ABT-S100
User Guide
1312
3.Functions
•Standby mode
1) Accept a call
- Accepting a call in the standby mode
For an incoming call, press on the headset in a short time.
- Accepting a call during music streaming
For an incoming call, during the music playing, the music stops and the bell rings.
At this time, press shortly to connect the call.
If 2 ~ 4 seconds pass after the call finishes, the music resume playing without any
additional operation.
2) End a call
Press to disconnect a call.
3) Reject a call *
Press and hold down for 3 seconds to reject a call while the bell rings.
4) Make a call
- New Dialing (On mobile phone)
Enter the phone number you wish to call on the mobile phone and press on the
headset.
*It is possible only when the mobile phone supports the call rejection function and the headset is paired with
mobile phone as hands-free service or stereo headset service. It can be transmitted as a voice mail or the signal
indicating that the line is busy.
[Notes]
The headset cannot be activated, if send button on the mobile phone is applied after entering the
phone number. Press and hold down on the headset for 3 seconds to activate to the headset.
- Last number Redialing
Press and hold down for 3 seconds. At this time, the last numbers are listed on
the mobile phone, may vary depending on the type of mobile phone. And press
button once.
- Voice Dialing *
Press and hold down shortly and say the name. To cancel voice dialing feature,
please tap shortly. This may not work correctly, please see the user guide of mobile
phone.
•Talk mode
Functions during talking (talk mode) may not be working as intended for some mobile
phones.
1) Adjust volume
Press ++or --shortly to control the volume during calling during talking.
2) Mic Mute On/Off
Press and hold down --for 3 seconds for the caller not to hear my voice.
Press and hold down --for 3 seconds to reset it.
*This function is available only when the mobile phone supports the voice recognition and the headset is
paired with as handsfree service or stereo headset service. For details, see the user guide of mobile phone.
[Notes]
Some mobile phones do not list the last phone numbers but makes a direct call to the number.
Bluetooth Stereo Headset
earomix ABT-S100
User Guide
1514
•Music streaming mode
2) Call transfer
If the call is transferred from mobile phone to headset, Press and hold down for
3 seconds. (This also applied when the call is to be transferred from headset to mobile
phone.)
[Notes]
•
That applies only when the connected device supports the Bluetooth Audio Remote Control
Profile (AVRCP). See the glossary on Page 19 for more information.
•
Some mobile phone may play only MP3 files. In this case, make sure that the stored music is in
MP3 format.
•
Holding the
▶/ ■
more than 4 seconds may lead to disconnection between the headset with
some mobile phones.
Play/Pause Press
▶/ ■
shortly
Stop Press
▶/ ■
long
Previous Track / Next Track Press
I◀◀ / ▶▶I
shortly
Rewind / Fast Forward down
I◀◀ / ▶▶I
approx. 3 seconds and release to resume
Adjusting Volume Press
--//++
shortly
[Notes]
Some mobile phones do not support call transfer function. Please see the mobile phones’
user guide for details.
•Headset Controls
*Short Key : 0.5 Second (Tapping Button)
•
Long Key : Over 3 Seconds
Pairing mode
Power On -
+++
Long High-pitch Beep
(twice)
Flashing Red every
2 seconds
Power Off Don’t care
+++
Long High-pitch Beep Flashing Blue two times
Paring Mode-Enter
(Pairable) Connectable
▶
//■■
Long Low-pitch Beep
(twice)
Flashing Red and Blue
alternatively
Reconnect Connectable
▶
//■■
Short Low-pitch Beep
(twice slowly)
Flashing Blue every
5 seconds
Disconnect
(Disconnectable Request) Standby
▶
//■■
Long No tone Flashing Red every
2 seconds
Quit Deep Sleep Mode Deep Sleep Mode
▶
//■■
Long No tone Flashing Red every 2 sec-
onds
Battery Status Check Standby
I◀◀+
▶▶I
Long No tone Depends on Battery status
(5 page)
Music streaming mode
Play/Pause Pause/Play
▶
//■■
Short No tone
Stop Play/Pause
▶
//■■
Long No tone
Previous/Next Track Play/Pause/Stop
I◀◀//▶▶I
Short No tone
Rewind/Fast Forward Play/Pause/Stop
I◀◀//▶▶I
Long No tone
Adjust Volume Play/Pause/Stop/Talking
++//--
Short No tone
Standby mode
Accept a Call Call indication Short No tone Flashing Blue every 2 seconds
Reject a Call Call indication Long High-pitch Beep
Voice Dialing Standby Short No tone
Last number Redialing Standby Long No tone
Talk mode
End a call Talking Short High-pitch Beep
Mic Mute On/Off Talking
-
Long No tone
Call Transfer
(Headset/Mobile phone) Talking Long No tone
Function Before state Button Definition Sound Effect Indicator Light
Button Press Time
Bluetooth Stereo Headset
earomix ABT-S100
User Guide
1716
4.Appendix
•Troubleshooting
1) In case the sound is disconnected.
•As the Bluetooth is a wireless technology, it is sensitive to object located between head-
set and connected device. Even when there is not big object such as well, the distance
between headset and the device shall not exceed 10m(33 feet).
•Keep the cordless telephone or wireless network device away from the headset and
mobile phone as they make noises or electronic wave.
•The electronic wave is in unstable status. Move the headset and mobile phone nearer.
2) No sound at all.
•Check the volume of headset.
•Check if the headset is paired with playing device.
•Check if the blue indicator light on Call flashes every 5 seconds. If it keeps not working,
then, make sure that it is connected to mobile phone or other device.
•Despite repowering the headset, if it keeps occurring, press the reset hole on the side of
right earphone to initialize the product.
3) In case the pairing does not work.
•The pairing might have been deleted from the mobile phone. Pair it again as instructed
on page 9.
4) In case other device such as PC or MP3 player does not conduct stereo
streaming.
•Check if the device supports Bluetooth Version 1.2 or 2.0 and it has the Advanced Audio
Distribution Profile(A2DP). It can work only when these conditions are met. See the user
guide of the device for pairing.
5) In case the stereo is played but the music control button does not work.
•Make sure that the connected device supports the Audio/Video Remote Control
Profile(AVRCP).
6) In case rejecting call, last number redialing, voice dial does not work.
•It works only when the mobile phone supports the above functions and the headset is
paired with mobile phone as handsfree service or stereo headset service.
7) In case the talk time of battery is different from described in the user guide.
•As the battery for this product is consumable, its use time gets shorter as the battery is
used.
•The battery time also gets shorter when the headset is placed in hot or low temperature.
•The warranty for the battery is 6 months. If you want to replace the battery, visit the cus-
tomer center.
•The life of battery depends on the environment of use.
Bluetooth Stereo Headset
earomix ABT-S100
User Guide
1918
•Safety Notes
1) Cautions
1. Keep it away from heating sources as it may explode.
2. Do not drop it or give a strong shock to it. It could be damaged or its life can be shortened.
3. Do not disassemble or repair the product without permission. Contact the store or
customer service center for repair.
4. In case the product is put into water or wet, turn the power off and contact the store
or customer service center for repair.
5. Do not use the chemical products for cleaning the product.
6. USB charging cable is to be provided by the manufacturer or one of the approved ones.
7. Keep it in a dry place with room temperature for long term storage.
8. If any medical equipments are used, make sure that the product is well protected
from electric wave. If necessary, get the help from medical doctor.
9. The product is compliant with Bluetooth version 2.0 Class 2 specifications. For the
information on compatibility, contact the manufacturer of the applicable device or
our customer service center.
10. Some countries may prohibit driver from wearing the headset on two ears at the
same time during driving. Comply with the laws and regulations related to the use of
mobile phone during driving.
11. Do not keep the headset in high volume for a long period of time, It can damage your ear.
2) Disclaimer
1. The manufacturer, store and distributor do not take any responsibilities from losses or
damages which occur due to accident or user’s error.
2. The user’s manual is completed based on the current specification of the product.
3. The specification and use of the product is subject to change for performance
improvement without prior notice.
•Glossary
1. Bluetooth wireless technology
Bluetooth is a radio technology that connects devices, such as mobile phones and
headsets, without wires or cords over a short distance (approx. 33 feet).
For details, visit our website (www.earomix.com)
2. Bluetooth Profiles
Bluetooth profiles are general behaviors through which Bluetooth enabled devices
communicate with other devices. Bluetooth phones support different sets of profiles -
most support the headset profile but some support the hands-free profile and others
support both profiles. In order to support a certain profile, a phone manufacturer has to
implement certain mandatory features within the phone's software.
3. Advanced Audio Distribution Profile (A2DP)
A2DP(Advanced Audio Distribution Profile) is a Bluetooth Profile that enables stereo
sound. Both the headset and the device it connects to must support A2DP in order to
hear A2DP sound in the headset.
4. Audio/Video Remote Control Profile (AVRCP)
AVRCP (Audio Video Remote Control Profile) is a Bluetooth profile that enables remote
control of the device that the headset is connected to. Both the headset and the device
it connects to must support AVRCP in order for AVRCP to work.
HSP (Headset Profile)
HFP (Hands-free Profile)
Bluetooth Profile that place and receive calls
for a hands-free device.
A2DP (Advanced Audio Distribution Profile)
AVRC (Audio/Video Remote Control Profile) Bluetooth Profile that enables stereo sound
Bluetooth Stereo Headset
earomix ABT-S100
User Guide
21
5. Pairing
The process of establishing a new relationship between two Bluetooth enabled
devices. During this process a link key is exchanged (either before connection estab-
lishment was requested or during connecting phase).
6. Pairable state
It is the state that the headset is ready to be paired to mobile phones or other
Bluetooth enabled devices. (The headset must be paired to the devices you wish to use
with before use.)
7. Connectable state
It is the state that the headset is in waiting to be connected with pre-paired Bluetooth
enabled devices.
8. Standby state
When the headset/speakerphone is passively waiting for a call. When you “end” a call,
the headset/speakerphone will go into standby state.
9. Deep Sleep mode
If the headset (in connectable state) is not connected within 3 minutes, it goes into
deep sleep mode in order to minimize the battery consumption.
•Specification
20
Bluetooth Compliance Bluetooth version 2.0
Supported Profiles Headset and Hands-free, A2DP, AVRCP
Frequency Band 2,402~2,480 MHz
Output Power Max 0 dBm
Operating Range Up to 10 m (33 feet)
Talk Time Up to 7 hours
Music Time Up to 6 hours
Standby Time Up to 120 hours
Battery Type Rechargeable Lithium Polymer (3.7V/250mAh)
Charging Methods USB charging cable
Charging Time Approximately 2 hours
Dimensions ф36 (Diameter) * 15 (H) mm
Weight 40g
Operating Temperature -10 ~ +50
℃
* May vary depending on use environment and operation.
Bluetooth Stereo Headset
earomix ABT-S100
User Guide
2322
ⓒ2006 earomix, Asiana IDT Inc. All rights reserved. earomixⓇis a registered trademark, of
Asiana IDT Inc. All other trademarks included herein are the property of their respective owners.
Gwanghwamun Building 12F.
211 Sejongno, Jongro-gu, Seoul, Korea (110-730)
Phone : (82-2) 2127-8340
Thank you very much for purchasing Bluetooth mono headset earomix ABT-S100.
Please visit our website (www.earomix.com) for more details and services.
•FCC Compliance:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may
cause undesired operation.