Asiana IDT ABT-S100 Bluetooth Headset User Manual S 100 0619
Asiana IDT,INC. Bluetooth Headset S 100 0619
User Manual
Stereo Headset For wireless communication For listening to high quality sound For convenient life Free From Wired... earomix ABT-S100 User guide www.earomix.com Printed Ver 2007-03 earomix ABT-S100 Copyrightsⓒ2007 ASIANA IDT, Inc. Bluetooth Stereo Headset earomix ABT-S100 User Guide 02 1. Getting Started •Button controls Button •Package contents Before state Standby Answer button Call indication Talking Headset •Features USB Charging Cable Connectable User Guide ▶/■ Deep Sleep Mode Play·Pause·Stop button Standby Play/Pause I◀◀ /▶▶I Previous Track / Next Track Play/Pause/Stop Play/Pause/Stop Volume Down button Talking Play/Pause/Stop Talking Standby Volume Up button ++ I◀◀ + ▶▶I Press time Short Long Short Long Short Long Short Long Long Short Long Short Long Short Long Short Short Long Short Short Long Long After state Voice Dialing Cancel Voice Dialing New Dialing (On mobile phone) Cancel calling Last number Redialing Accept a Call Reject a Call End a Call Call Transfer (Headset / Mobile phone) Connect Request Pairable Connectable Play Disconnect Request Pause/Play Stop Previous/Next Track Rewind/Fast Forward Volume Down Volume Down Mic Mute On/Off Volume Up Volume Up Power On/Off Battery Status Check * Short Key : 0.5 Second (Tapping Button) • Long Key : Over 3 Seconds 03 Bluetooth Stereo Headset earomix ABT-S100 User Guide 04 •Charging •Indicator Lights This headset has its own battery in it. The internal battery must be fully charged before using for the first time. With the USB cable, one end goes in the USB port on the computer and the other and goes in the socket on the headset as shown in the picture below. Full charge of the headset takes approximately 2 hours. Beep sound is generated every 30 seconds when the battery is low and the power goes off automatically after approximately 3 minutes. 2 hours Operating time Talk 7 hours Charging in progress Charging completed Battery Status Check Red indicator on Red indicator off Remaining battery capacity 5~20% Remaining battery capacity 20~80% Remaining battery capacity 80~100% Connectable state Pairable state Bluetooth Device connected to Headset Red flashes three times Blue flashes three times Red and Blue flash simultaneously three times Red flashes every 2 seconds Red and Blue flash alternatively Blue flash every 5 seconds [Notes] •earomix ABT-S100 headset must be fully charged before using it for the first time. •Use only the USB charging cable provided with the product. •Using unauthorized USB charging cable may lead to the headset failure. •Operating the headset is not recommended while being charged, If you wish to answer the incoming call, while the headset is being charged, separate the charging cable completely before use. •Press and hold down both I◀◀ and ▶▶I at the same time for 3 seconds to check battery remaining. It may not function correctly, if the buttons are not pressed as instructed. •Charging and Operating time Charging time 05 Standby 120 hours Music 6 hours Bluetooth Stereo Headset earomix ABT-S100 User Guide 06 07 2. Pairing and connecting •Wearing Wear the headset as shown in the picture below. See the following illustration for pairing and connecting devices. 1. Connectable state 2. Pairable state Pairing ( Page 9) Press the hanger with finger softly to broaden it for easy wearing. [Notes] The microphone is incorporated into the cable which connects the stereo headset. •Storing Red flashes every 2 seconds 3. Connecting state Red and Blue flash alternatively 4. Connected state Turn the power off before safety storing it. [Caution] •Do not keep it in a place with the temperature below 0°C(32°F) or above 40°C(104°F), under the direct sunshine or in a car which is hot heated by a sunshine. •Keep headset or other parts in a dry place. Connecting (Page 11) Red flashes continuously Blue flashes every 5 seconds Bluetooth Stereo Headset earomix ABT-S100 User Guide 08 •Powering 09 •Pairing When the headset is switched on, the headset is put in the connectable state that other device can be either paired or connected. In order to use with a mobile phone or other device, please pair or connect the headset to the mobile phone or the device. 1) Power On Press and hold down both and + at the same time for 3 seconds. Red indicator light flashes three times and a high pitch beep is heard two times. 2) Power Off Press and hold down both and + at the same time for 3 seconds. Blue indicator light flashes two times with single high pitch beep. [Notes] The headset must be fully charged before using it for the first time. Pair earomix ABT-S100 headset with mobile phone or other Bluetooth enabled device before using it. Paring is a process establishing a new relationship between two Bluetooth enabled devices. ❶ Put the headset in pairable state. Switch the headset on. When the headset is switched on, it flashes Red every 2 seconds. Press and hold down ▶/■ until Red and Blue indicator lights flash in turn. (Approx. 3 seconds) [Notes] •If the headset is not paired within 3 minutes after going into the pairable state, it returns to the connectable state. In this case, the indicator light flashes Red every 2 seconds. Press and hold down ▶/■ for 3 seconds to make it in the pairable state again. •Please put the headset and the device you wish to pair with closely. Bluetooth Stereo Headset earomix ABT-S100 User Guide 10 11 •Connecting ❷ Search earomix ABT-S100 headset according to the user guide of the Bluetooth device. In most cases, select ‘set’, ‘connection’ from the menu to search the Bluetooth device or select the option for add. ❸ Select earomix ABT-S100 headset from the list of found devices. If there is any question of whether the headset is to be paired or not, press ‘yes’ or ‘confirm’. If the passkey (or PIN) is required on the screen, enter ‘0000’ (four 0’s) as the password of headset. ❹ The indicator light flashes Blue when paired successfully. [Notes] Passkey or PIN is a code that you enter on your mobile phone to pair it with your headset. This makes your phone and the headset recognize each other and automatically work together. If the device has been paired before, just tapping ▶/■ gives the re-establishment of connection between the headset and the paired device. [Notes] •The headset is on the connectable state once it is turned on. (Red flash every 2 seconds) If it is not connected to other device within 3 minutes in the connectable state, the headset goes into Deep Sleep mode. In order to establish the connection, press and hold down ▶/■ for 3 seconds or turn the power on again and start it again. •Disconnection The connection currently established with the device can be disconnected by pressing and holding down ▶/■ for 3 seconds (standby state). * Please stop music first, if music is being played. •For detailed information on the connecting, see the user guide of mobile phone or other device. Time for making connection with the headset may vary from device to device. •Multi Pairing (Pairing second Bluetooth enabled device) Bluetooth has been originally designed to have one Bluetooth enabled device paired at a time. If other device is to be connected to your headset, it firstly disconnects the currently paired device from headset and makes other device connected to the headset. However, ABT-S100 can be paired with two devices simultaneously. So, if either of them is to be connected to the headset, just make a connection with the device you wish to use. [Notes] •The device which is paired with headset first between mobile phone and other device will be used in mobile phone communication. For detailed information on the multi pairing, see the user guide of mobile phone or other device. Bluetooth Stereo Headset earomix ABT-S100 User Guide 12 13 3. Functions •Standby mode 1) Accept a call - Accepting a call in the standby mode For an incoming call, press on the headset in a short time. - Accepting a call during music streaming For an incoming call, during the music playing, the music stops and the bell rings. At this time, press shortly to connect the call. If 2 ~ 4 seconds pass after the call finishes, the music resume playing without any additional operation. 2) End a call Press to disconnect a call. 3) Reject a call * Press and hold down [Notes] Some mobile phones do not list the last phone numbers but makes a direct call to the number. - Voice Dialing * Press and hold down shortly and say the name. To cancel voice dialing feature, please tap shortly. This may not work correctly, please see the user guide of mobile phone. * This function is available only when the mobile phone supports the voice recognition and the headset is paired with as handsfree service or stereo headset service. For details, see the user guide of mobile phone. for 3 seconds to reject a call while the bell rings. * It is possible only when the mobile phone supports the call rejection function and the headset is paired with mobile phone as hands-free service or stereo headset service. It can be transmitted as a voice mail or the signal indicating that the line is busy. •Talk mode Functions during talking (talk mode) may not be working as intended for some mobile phones. 4) Make a call - New Dialing (On mobile phone) Enter the phone number you wish to call on the mobile phone and press headset. - Last number Redialing Press and hold down for 3 seconds. At this time, the last numbers are listed on the mobile phone, may vary depending on the type of mobile phone. And press button once. on the [Notes] The headset cannot be activated, if send button on the mobile phone is applied after entering the phone number. Press and hold down on the headset for 3 seconds to activate to the headset. 1) Adjust volume Press + or - shortly to control the volume during calling during talking. 2) Mic Mute On/Off Press and hold down - for 3 seconds for the caller not to hear my voice. Press and hold down - for 3 seconds to reset it. Bluetooth Stereo Headset earomix ABT-S100 User Guide 14 15 •Headset Controls 2) Call transfer Function If the call is transferred from mobile phone to headset, Press and hold down for 3 seconds. (This also applied when the call is to be transferred from headset to mobile phone.) [Notes] Some mobile phones do not support call transfer function. Please see the mobile phones’ user guide for details. Press ▶/■ shortly Press ▶/■ long Press I◀◀/▶▶I shortly down I◀◀/▶▶I approx. 3 seconds and release to resume Press -/ + shortly [Notes] •That applies only when the connected device supports the Bluetooth Audio Remote Control Profile (AVRCP). See the glossary on Page 19 for more information. •Some mobile phone may play only MP3 files. In this case, make sure that the stored music is in MP3 format. •Holding the ▶/■ more than 4 seconds may lead to disconnection between the headset with some mobile phones. ++ Long ++ Long Power On Power Off Paring Mode-Enter (Pairable) Don’t care Connectable ▶//■ Long Reconnect Connectable ▶//■ Short Sound Effect High-pitch Beep (twice) High-pitch Beep Low-pitch Beep (twice) Low-pitch Beep (twice slowly) Standby ▶//■ Long No tone Quit Deep Sleep Mode Deep Sleep Mode ▶//■ Long No tone Battery Status Check Standby I◀◀+▶▶I Long No tone Pause/Play ▶//■ Play/Pause ▶//■ Play/Pause/Stop I◀◀//▶▶I Play/Pause/Stop I◀◀//▶▶I Play/Pause/Stop/Talking +/- Short Long Short Long Short No tone No tone No tone No tone No tone Call indication Call indication Standby Standby Short Long Short Long No tone High-pitch Beep No tone No tone Short Long High-pitch Beep No tone Long No tone (Disconnectable Request) Play/Pause Stop Previous Track / Next Track Rewind / Fast Forward Adjusting Volume Button Definition Button Press Time Indicator Light Pairing mode Disconnect •Music streaming mode Before state Flashing Red every 2 seconds Flashing Blue two times Flashing Red and Blue alternatively Flashing Blue every 5 seconds Flashing Red every 2 seconds Flashing Red every 2 seconds Depends on Battery status (5 page) Music streaming mode Play/Pause Stop Previous/Next Track Rewind/Fast Forward Adjust Volume Standby mode Accept a Call Reject a Call Voice Dialing Last number Redialing Talk mode End a call Mic Mute On/Off Call Transfer (Headset/Mobile phone) Talking Talking Talking * Short Key : 0.5 Second (Tapping Button) • Long Key : Over 3 Seconds Flashing Blue every 2 seconds 16 Bluetooth Stereo Headset earomix ABT-S100 User Guide 17 4. Appendix •Troubleshooting 1) In case the sound is disconnected. •As the Bluetooth is a wireless technology, it is sensitive to object located between headset and connected device. Even when there is not big object such as well, the distance between headset and the device shall not exceed 10m(33 feet). •Keep the cordless telephone or wireless network device away from the headset and mobile phone as they make noises or electronic wave. 4) In case other device such as PC or MP3 player does not conduct stereo streaming. •Check if the device supports Bluetooth Version 1.2 or 2.0 and it has the Advanced Audio Distribution Profile(A2DP). It can work only when these conditions are met. See the user guide of the device for pairing. •The electronic wave is in unstable status. Move the headset and mobile phone nearer. 5) In case the stereo is played but the music control button does not work. 2) No sound at all. •Make sure that the connected device supports the Audio/Video Remote Control Profile(AVRCP). •Check the volume of headset. •Check if the headset is paired with playing device. •Check if the blue indicator light on Call flashes every 5 seconds. If it keeps not working, then, make sure that it is connected to mobile phone or other device. •Despite repowering the headset, if it keeps occurring, press the reset hole on the side of right earphone to initialize the product. 3) In case the pairing does not work. •The pairing might have been deleted from the mobile phone. Pair it again as instructed on page 9. 6) In case rejecting call, last number redialing, voice dial does not work. •It works only when the mobile phone supports the above functions and the headset is paired with mobile phone as handsfree service or stereo headset service. 7) In case the talk time of battery is different from described in the user guide. •As the battery for this product is consumable, its use time gets shorter as the battery is used. •The battery time also gets shorter when the headset is placed in hot or low temperature. •The warranty for the battery is 6 months. If you want to replace the battery, visit the customer center. •The life of battery depends on the environment of use. Bluetooth Stereo Headset earomix ABT-S100 User Guide 18 •Safety Notes 1) Cautions 1. Keep it away from heating sources as it may explode. 2. Do not drop it or give a strong shock to it. It could be damaged or its life can be shortened. 3. Do not disassemble or repair the product without permission. Contact the store or customer service center for repair. 4. In case the product is put into water or wet, turn the power off and contact the store or customer service center for repair. 5. Do not use the chemical products for cleaning the product. 6. USB charging cable is to be provided by the manufacturer or one of the approved ones. 7. Keep it in a dry place with room temperature for long term storage. 8. If any medical equipments are used, make sure that the product is well protected from electric wave. If necessary, get the help from medical doctor. 9. The product is compliant with Bluetooth version 2.0 Class 2 specifications. For the information on compatibility, contact the manufacturer of the applicable device or our customer service center. 10. Some countries may prohibit driver from wearing the headset on two ears at the same time during driving. Comply with the laws and regulations related to the use of mobile phone during driving. 11. Do not keep the headset in high volume for a long period of time, It can damage your ear. 2) Disclaimer 1. The manufacturer, store and distributor do not take any responsibilities from losses or damages which occur due to accident or user’s error. 2. The user’s manual is completed based on the current specification of the product. 3. The specification and use of the product is subject to change for performance improvement without prior notice. 19 •Glossary 1. Bluetooth wireless technology Bluetooth is a radio technology that connects devices, such as mobile phones and headsets, without wires or cords over a short distance (approx. 33 feet). For details, visit our website (www.earomix.com) 2. Bluetooth Profiles Bluetooth profiles are general behaviors through which Bluetooth enabled devices communicate with other devices. Bluetooth phones support different sets of profiles most support the headset profile but some support the hands-free profile and others support both profiles. In order to support a certain profile, a phone manufacturer has to implement certain mandatory features within the phone's software. 3. Advanced Audio Distribution Profile (A2DP) A2DP(Advanced Audio Distribution Profile) is a Bluetooth Profile that enables stereo sound. Both the headset and the device it connects to must support A2DP in order to hear A2DP sound in the headset. 4. Audio/Video Remote Control Profile (AVRCP) AVRCP (Audio Video Remote Control Profile) is a Bluetooth profile that enables remote control of the device that the headset is connected to. Both the headset and the device it connects to must support AVRCP in order for AVRCP to work. HSP (Headset Profile) HFP (Hands-free Profile) Bluetooth Profile that place and receive calls for a hands-free device. A2DP (Advanced Audio Distribution Profile) AVRC (Audio/Video Remote Control Profile) Bluetooth Profile that enables stereo sound Bluetooth Stereo Headset earomix ABT-S100 User Guide 20 5. Pairing The process of establishing a new relationship between two Bluetooth enabled devices. During this process a link key is exchanged (either before connection establishment was requested or during connecting phase). 6. Pairable state It is the state that the headset is ready to be paired to mobile phones or other Bluetooth enabled devices. (The headset must be paired to the devices you wish to use with before use.) 7. Connectable state It is the state that the headset is in waiting to be connected with pre-paired Bluetooth enabled devices. 8. Standby state When the headset/speakerphone is passively waiting for a call. When you “end” a call, the headset/speakerphone will go into standby state. 9. Deep Sleep mode If the headset (in connectable state) is not connected within 3 minutes, it goes into deep sleep mode in order to minimize the battery consumption. •Specification Bluetooth Compliance Supported Profiles Frequency Band Output Power Operating Range Talk Time Music Time Standby Time Battery Type Charging Methods Charging Time Dimensions Bluetooth version 2.0 Headset and Hands-free, A2DP, AVRCP 2,402~2,480 MHz Max 0 dBm Up to 10 m (33 feet) Up to 7 hours Up to 6 hours Up to 120 hours Rechargeable Lithium Polymer (3.7V/250mAh) USB charging cable Approximately 2 hours ф36 (Diameter) * 15 (H) mm Weight 40g Operating Temperature -10 ~ +50℃ * May vary depending on use environment and operation. 21 22 •FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Thank you very much for purchasing Bluetooth mono headset earomix ABT-S100. Please visit our website (www.earomix.com) for more details and services. Gwanghwamun Building 12F. 211 Sejongno, Jongro-gu, Seoul, Korea (110-730) Phone : (82-2) 2127-8340 ⓒ 2006 earomix, Asiana IDT Inc. All rights reserved. earomix Ⓡ is a registered trademark, of Asiana IDT Inc. All other trademarks included herein are the property of their respective owners. Bluetooth Stereo Headset earomix ABT-S100 User Guide 23
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 13 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:f91486d8-78d6-4bf9-8f86-3ffc704d831c Producer : Acrobat Distiller 5.0.2 (Macintosh) Create Date : 1904:01:06 11:30:04Z Modify Date : 2007:07:06 14:23:45+09:00 Metadata Date : 2007:07:06 14:23:45+09:00 Creator Tool : QuarkXPress..: AdobePS8.5.1 8.5.1 Document ID : uuid:fd36fab2-187f-461f-8a9d-6d641851b86c Format : application/pdf Creator : .. .... Title : S-100 .... ...... ....0619 Author : .. ....EXIF Metadata provided by EXIF.tools