Atoms Labs AWSC36 Digital Wireless Weather Proof Camera User Manual QSG DWH H73AX 20140528
Atoms Labs LLC Digital Wireless Weather Proof Camera QSG DWH H73AX 20140528
User manual
QUICK START GUIDE GETTING TO KNOW THE MONITOR AND CAMERA Receiver (back/side) Camera KIT CONTENT : Antenna SD Card Slot Wireless Camera w/ stand Wireless Touch Screen LCD Monitor w/ Cradle x2 Internet Cable Power Adapter Camera Antenna Stand x1 x2 x3 Quick Start Guide Screw Pack x1 PIR x1 CAMERA INSTALLATION x1 FACTORY DEFAULT SETTING Press and hold the reset button on the power cable for 5 seconds and the system will start the reset process. The system will restore to factory default. FCC Compliance Statement: This device complies with Part 15 of the FCC rules. Operation is subjected to the following two conditions: (1)this device may not cause harmful interference, and (2) this device must accept any interferencereceived, including interference that may cause undesired operation. Products with CE Marking comply with EMC Directive (2004/108/EC); Low Voltage Directive (73/23/EEC); R&TTE (1999/5/EC); ROHS Directive (2011/65/EU) issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European Norms: EMC: EN 301 489 LVD: EN 60950 Radio: EN 300 328 If the camera system no longer functions or can no longer be repaired, it must be disposed of according to the valid statutory regulations. Disposal of spent batteries/accumulators: You are required by law (Battery Ordinance) to return all spent batteries and accumulators. Disposing of spent batteries/accumulators with common household waste is prohibited! Batteries/accumulators that contain hazardous substances are marked with the symbols on the side. These symbols indicate that it is prohibited to dispose of these batteries/accumulators in the household waste. The abbreviations for the respective heavy metals are: Cd=cadmium, Hg=mercury, Pb=lead. You can return spent batteries and accumulators that can no longer be charged to the designated collection points in your community, outlets or wherever batteries or accumulators are sold. Following these instructions will allow you to fulfill the legal requirements and contribute to the protection of our environment! Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. L'antenne (s) utilisé pour cet émetteur doit être installé pour fournir une distance de séparation d'au moins 20 cm de toute personne et ne doit pas être colocalisées ou opérant dans conjointement avec une autre antenne ou émetteur. 1 Secure the camera stand on a stable surface 2 Loosen up the thumb screw 3 Adjust proper view angle, then secure the joint with T-bolt. Pairing the Camera to Receiver (optional) The system supports up to 4 wireless cameras. If you are adding another camera to the system, please ensure its channel is set to a different channel to the existing camera(s). 1. Go to the Main Menu>Camera Setup (specify channel 1/2/3/4)>Press the Camera Pairing button 2. Press the pairing key ONCE on the camera Setting the Camera Channel (optional) The wireless camera is preset to channel 1 by default. You can also use the steps above to change the camera channel if necessary. OPERATION SCREEN Zoom Feature To zoom into a particular area, 1. Go to full view, then tap to activate zoom mode. 2. Select the zone by tapping the zone area to view zoom in screen. Main Screen Camera Mode Battery Capacity Connecting to the Internet Scheduled Volume Camera Number Internet Connected Pop Up Menu Tab System Settings Connecting to the Record Status Remote View No SD Card Indicator SD Capacity Record Status Motion Zoom From the pop-up menu, tap the following icons Manual Recording Live Screen Displays The Live screen displays in 2 views - Quad View or Full View. Quad View displays the images in 4 quadrants (only display camera that is ON). Tap a quadrant to display single camera view / full view. Tap on that image again to return to Quad View. 1. On the Live screen, tap camera to begin recording. for the 2. Tap it again to stop recording. Playback the Recorded Video From the pop-up menu, tap the following icons
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Create Date : 2014:06:03 15:06:56+09:00 Creator : Adobe Illustrator CS6 (Windows) Modify Date : 2014:07:30 16:58:07+08:00 XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Title : QSG_DWH-H73AX_20140528 Metadata Date : 2014:07:30 16:58:07+08:00 Creator Tool : Adobe Illustrator CS6 (Windows) Thumbnail Width : 256 Thumbnail Height : 76 Thumbnail Format : JPEG Thumbnail Image : (Binary data 5240 bytes, use -b option to extract) Instance ID : uuid:b17f5704-1b27-4d35-bb34-4afcc95bbe52 Document ID : xmp.did:9F68CC54C3EAE311AD29A972F8A58DC4 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:7bc70b29-065f-4737-ba7c-f9dabc827e83 Derived From Document ID : xmp.did:0342FE7C07E6E3119825CEA1EF57043E Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:939D644CEC45E311BF40FCCBC46B3F76, xmp.iid:9F68CC54C3EAE311AD29A972F8A58DC4 History When : 2013:11:05 16:19:57+08:00, 2014:06:03 15:06:50+08:00 History Software Agent : Adobe Illustrator CS6 (Windows), Adobe Illustrator CS6 (Windows) History Changed : /, / Manifest Link Form : EmbedByReference, EmbedByReference, EmbedByReference Manifest Reference File Path : G:\icon\CE.png, G:\icon\FCC.png, G:\JSW Corp_天鉞\QSG\DWH-H73AX\原始檔\Live Screen.jpg Startup Profile : Print Has Visible Overprint : True Has Visible Transparency : True N Pages : 1 Max Page Size W : 296.999959 Max Page Size H : 210.001652 Max Page Size Unit : Millimeters Font Name : MyriadPro-SemiboldSemiCn, MyriadPro-SemiboldSemiCnIt, MyriadPro-Regular, MyriadPro-It Font Family : Myriad Pro, Myriad Pro, Myriad Pro, Myriad Pro Font Face : Semibold SemiCondensed, Semibold SemiCondensed Italic, Regular, Italic Font Type : Open Type, Open Type, Open Type, Open Type Font Version : Version 2.037;PS 2.000;hotconv 1.0.51;makeotf.lib2.0.18671, Version 2.037;PS 2.000;hotconv 1.0.51;makeotf.lib2.0.18671, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895 Font Composite : False, False, False, False Font File Name : MyriadPro-SemiboldSemiCn.otf, MyriadPro-SemiboldSemiCnIt.otf, MyriadPro-Regular_0.otf, MyriadPro-It_0.otf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Group Name : 明亮 Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 60.000004 Swatch Groups Colorants Magenta : 90.000000 Swatch Groups Colorants Yellow : 0.003099 Swatch Groups Colorants Black : 0.003099 Producer : Adobe PDF library 10.01 Page Count : 2 For : PR04, Bounding Box : 0 -596 842 0 Container Version : 9 Creator Version : 16EXIF Metadata provided by EXIF.tools