Attenti US TSSDW40143 1-Piece (3G Gen 4) Offender Tracking Device User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3751975
Application ID	T0ouYamU7D2Q11/pN/iWYQ==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	228.29kB (2853638 bits)
Date Submitted	2018-02-13 00:00:00
Date Available	2018-02-13 00:00:00
Creation Date	2018-01-24 11:36:52
Producing Software	Microsoft® Word 2016
Document Lastmod	2018-01-24 11:36:52
Document Title	User manual
Document Creator	Microsoft® Word 2016
Document Author:	Jason Abernethy

Attenti One-Piece
Tracking Device 4
User Manual
January 16, 2018
1 Piece (Gen 4)
User Manual
2
Copyright ©2018 Attenti. All rights reserved.
No part of this publication may be reproduced, stored in a retrieval system, or
transmitted, in any form or by any means, electronic, mechanical, photocopying,
recording, or otherwise, without the prior written permission of Attenti.
The information in this document is subject to change without notice. The software
mentioned in this document is furnished under license and may only be used or copied
in accordance with the terms of such license. Contact software manufacturers directly
for terms of software licenses for any software mentioned in this document not
originating from Attenti.
All brand or product names are the trademarks or registered trademarks of their
respective holders.
3
SAFETY INFORMATION
Please read, understand, and follow all safety information contained in these instructions prior to the
use of this Attenti device. Retain these instructions for future reference.
Intended Use:
This Attenti device is part of an electronic monitoring system, which performs data transfer using
cellular network to a monitoring platform. This device has not been tested for and is not intended for
use on airplanes, in hazardous environments, in healthcare facilities, or where cellular phones or other
intentional transmitters are restricted.
Explanation of Signal Word Consequences
WARNING:
Indicates a hazardous situation which, if not avoided, could result in
serious injury or death
CAUTION:
Indicates a hazardous situation which, if not avoided, could result in
minor or moderate injury and/or property damage.
NOTICE:
Indicates a situation which, if not avoided, could result in property
damage.
Safety information for Trained Customer (e.g., officer, agency representative, ministry of justice) and
Offender.
•
WARNING
Avoid placing a device next to an implanted electronic device (e.g., don’t carry the device in a shirt
or jacket pocket directly near an implanted device).
•
To reduce the risks associated with fire or explosion:
- Do not intentionally open or damage the device.
- Do not enter areas with potentially explosive atmosphere. Potentially explosive areas are often,
but not always, clearly marked.
•
To reduce the risks associated with hazardous voltage:
- Do not modify AC/DC power adapter plug.
- Do not force the power plug into an outlet where it does not fit.
- Use only a Attenti provided power adapter to recharge or power the device.
- Do not unplug AC/DC adapter by power cord. Handle the adapter by the body only.
- Do not modify, decorate, or attempt to service the device. Return to Attenti authorized
personnel or location for repair or service. There are no user serviceable parts.
- Do not attempt to charge the device using an outdoor outlet. Only use the AC/DC adapter
indoors.
- Do not expose power adapter to rain, steam or wet conditions.
4
•
CAUTION
To reduce the risks associated with hot surfaces:
- Do not touch thermal pads on device or charger if charging is interrupted.
Safety information for Trained Customer only.
•
•
WARNING
To reduce the risks associated with fire or explosion:
- Do not attempt to access or replace battery. Battery is not user-replaceable. The device shall be
opened by Attenti authorized service only.
- Ensure storage temperature of device is within the range as specified in device manual.
CAUTION
To reduce the risks associated with sharp points:
- Use caution when handling pin trays.
Safety information for Offender only.
•
•
WARNING
To reduce the risks associated with fire or explosion:
- Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according
to the instructions.
- Do not use device outside of the operation temperature range specified in device manual.
Contact the agency representative from which you are monitored to get operation temperature
range.
To reduce the risks associated with hazardous voltage:
- If the device or power cord becomes damaged, contact the agency representative from which
you are monitored.
NOTICE
• Only authorized personnel can turn off or remove the device.
5
Table of Contents
Overview ................................................................................................................................................ 6
Operating Features ................................................................................................................................ 7
Operating Details ................................................................................................................................... 9
Communication ...................................................................................................................................... 9
LEDs ...................................................................................................................................................... 10
Enrollment ........................................................................................................................................... 14
Enroll a Contact .................................................................................................................................... 15
Contact Information Page .................................................................................................................. ..18
Enroll an Offender................................................................................................................................ 19
Supervision Level ................................................................................................................................. 20
Map Offender’s Address ...................................................................................................................... 24
Offender General Information Page .................................................................................................... 25
Create Schedule for Home Inclusion Zone........................................................................................... 26
Create Exclusion Zone .......................................................................................................................... 30
Attaching the 1 Piece ........................................................................................................................... 33
Unassign Hardware .............................................................................................................................. 38
Removing the 1 Piece........................................................................................................................... 42
Appendix .............................................................................................................................................. 44
Rule Definitions .................................................................................................................................... 44
1 Piece Self Test ................................................................................................................................... 46
6
Overview
Attenti’s One-Piece Tracking Device 4 utilizes GPS satellites to establish an offender’s location
by utilizing the cellular network to transmit the data. It is a one-piece device that is worn on an
offender’s ankle and is able to function in active and passive mode.
7
1 Piece Operating Features
Battery Life: The device should be given a full charge (4.2 volts) to supply a full day of battery
life. It takes approximately 2 to 2 ½ hours to acquire a full charge. The battery will last
approximately 24-30 hours if fully charged. The daily life of the battery is dependent upon the
call-in interval of the device, how often it goes to rest, and how many violations are created.
The battery must be charged each day in order to continue to track your offender’s locations.
Note: Battery tests are conducted using specific Attenti devices in controlled testing
environments. Actual performance and results may be affected by cellular network, location,
signal strength, feature configuration, usage, and many other factors. Battery life and charge
cycles vary by use and settings.
Vibrate feature: The 1 Piece will vibrate upon violation and when the device receives an alert
from the officer. If the offender causes a violation, the 1 Piece will vibrate three times
consecutively and once every ten minutes until they clear the violation.
If the officer sends the offender a notification (an alert) to contact them, the 1 Piece will vibrate
for ten consecutive seconds. As soon as the offender acknowledges the notification, the
vibration will stop. All three LED lights will be flashing red to indicate that the offender needs to
acknowledge the officer’s notification. If the offender doesn’t acknowledge the notification,
then every ten minutes it will vibrate once until they acknowledge the notification.
Storing GPS Points: The 1 Piece will store an offender’s location (GPS point) when in motion
(moving) every minute. If the 1 Piece does not experience any motion for two consecutive
minutes, the 1 Piece will go to “rest” and collect a GPS point every hour instead of each minute.
As soon as any motion is generated, the 1 Piece will resume recording points on a minute-tominute basis. However, if the offender causes a geographic zone violation and is in motion, the
1 Piece will begin to store a point every 15 seconds.
Call-in intervals: The 1 Piece will contact Attenti every hour while in active mode and every six
hours while in passive mode. While in active mode, it will also contact Attenti immediately
upon violation.
Automatic Redial: If the 1 Piece is unable to communicate with Attenti because of poor cellular
coverage, it will continue to try to call and download its information until it is successful.
Waterproof: The 1 Piece is waterproof down to 66 feet.
8
1 Piece Operating Features, cont.
Rubber strap: The 1 Piece strap is designed to last nine months to one year.
Magnetized Charger: The 1 Piece has a magnetized charger to prevent an accidental disconnect
when the battery is being recharged.
9
1 Piece Operating Details
Communication
The 1 Piece has a SIM card, which is similar to the data transmitter/receiver found in most
cellular phones. The 1 Piece uses the SIM card to transmit and download the GPS points and
alarms it has recorded to Attenti’s servers. The call-in intervals are determined by the agency’s
contract specifications. Examples may be hourly, every six hours, or immediately upon alarm.
Active Mode:
•
•
The standard 1 Piece call-in interval is once every hour while in compliance.
The 1 Piece will call Attenti as soon as a violation occurs.
Passive Mode:
•
•
•
The standard 1 Piece call-in interval is once every six hours.
The 1 Piece will not call Attenti when a violation occurs. The officer will only be
made aware of violations when they view the GPS maps or the Daily Event Summary
Report (DESR) that is emailed to the officer.
Violations will also be displayed in Case Management and on the Offender Monitor.
10
Operating Details
LEDs
There are three LEDs on the top of the 1 Piece, identified as Power, GPS, and Zone. The three
LEDs work separately and provide the offender with information. The 1 Piece will vibrate to
provide an indication that the offender must look at the LEDs.
11
Operating Details
LEDs
Power
This LED indicates the condition of the 1 Piece battery.
Prior to Activation:
Before activating the device, the officer should conduct a battery test. To do this, simply hold
down the silver activation button for three seconds and observe the condition of the Battery
LED.
•
•
If the “PWR” LED is green, there is a sufficient charge to activate the 1 Piece.
If the “PWR” LED is red, or does not light up at all, the 1 Piece needs to be charged.
After Activation:
•
•
If the “PWR” LED is blinking green, there is a sufficient charge.
If the “PWR” LED is blinking red, the 1 Piece needs to be charged.
1 Piece on Charger:
When the 1 Piece is connected to the charger, the Power LED will be solid (not flashing) green
or red.
•
•
•
If the LED is red: The 1 Piece is not fully charged and should not be disconnected from
the charger
If the LED is green: The 1 Piece battery has been completely charged and the charger
may be disconnected
When the 1 Piece is connected to the charger, it will vibrate once indicating a good
connection. When the battery is fully charged, the 1 Piece will vibrate once indicating
that it is okay to remove from the charger.
12
Operating Details
LEDs
GPS
Officer:
•
During activation, the officer will see this LED flashing green in unison with the flashing
“Zone” LED.
Offender:
•
•
In normal conditions, the GPS LED will be off.
The offender will see this LED flashing red to indicate a Motion No GPS warning or
violation. When the violation has cleared, the LED will stop blinking.
13
Operating Details
LEDs
Zone
Officer:
•
During activation, the officer will see this LED flashing green in unison with the flashing
“GPS” LED.
Offender:
•
•
In normal conditions, the Zone LED will be off.
The offender will see this LED flashing red to indicate an Inclusion or Exclusion Zone
warning and/or violation. When the violation has been cleared, the LED will stop
blinking.
14
Enrollment
EM Manager (Smart View) Log In
To access the secure website, go to https://smartview.ptm.com. You will be required to enter a
user ID and password. When using EM Manager (Smart View) for the first time, you will create
your own password. Enter your User ID (often your three initials and last four digits of your
social security number), the temporary password that was emailed to you, and click OK. The
next screen will tell you that your password has expired. Create your password, (the password
you select must contain at least 8 characters), and click OK. You will now be logged into EM
Manager (Smart View).
Note: If you forget your password, click the Forgot Password link. A new temporary password
will be emailed to you. To create your new password, follow the instructions contained
within the email.
15
Enroll a Contact
The Enroll Contact link is located on the left side of the Home page (see below). It is here that
you will enter the officer’s information (name, address, phone number, etc.), report types, and
default notification settings.
1. Click the Enroll Contact link on the left side of the Home page.
2. You will be redirected to the Enroll Contact page (see below). Enter all Contact
information.
3. Click Save.
16
Enroll a Contact, Cont.
17
Enroll a Contact, Cont.
Demographic Data
Enter the Contact’s information.
•
All fields with red asterisks (*) are required fields.
Report Options
Enter an email address where the selected reports will be sent.
Choose Daily Event Summary Report and/or Case Management Activity Report.
Default Notification Options
Select the type of Notification you would like to be your default method. The notification
method is dependent upon the information that you enter into the Notification Email or Text
Message fields.
• Pager
• Fax
• E-mail
• Text Message
Finish Enrollment
When you have completed the form, click Save.
18
Contact Information Page
When you click Save, you will be taken to the Contact Information page (see below). Here, you
can edit the contact information, as well as disable the contact.
1. To edit the contact information, move your mouse cursor over the Contact Functions
dropdown menu and left click Edit.
2. To disable the contact, move your mouse cursor over the Contact Functions dropdown
menu and left click Disable Contact.
19
Enroll an Offender
The Enroll Offender link is located on the left side of the Home page (see below).
1. Click the Enroll Offender link.
20
Supervision Level
Clicking on the Enroll Offender link will redirect you to the Level of Supervision page (see
below).
1. Click on the Level of Supervision drop down menu.
2. Select your Level of Supervision (see below).
3. Click the Continue button.
21
Offender Enrollment
After selecting the Level of Supervision, you will be redirected to the Enroll Offender page (see
below). It is here that you will select an Assigned Officer, enter the Offender’s Information,
select the Notification Contact and Method, Assign Hardware, and select the Basic Rule Setup.
22
Offender Enrollment, Cont.
Demographic Data
1. Enter the Offender's Information.
• All fields with red asterisks (*) are required fields
2. Click the Map button to geo-code the offender’s address. This is required if you
are creating a Home Inclusion Zone for the offender.
3. Select the Offender Type.
4. Select the Time Zone.
Hardware Assignment
5. Locate the serial number on the device.
6. Click on the drop down menu and select that serial number for the device.
Basic Rule Setup
7. Click the box next to Create Default Home Zone from Home Address. For
information on how to edit the schedule for the Home Rule, refer to page 26.
8. Choose the appropriate Contact from the Notification Contact drop down list. The
selected Contact will be notified for all rules.
9. Click the Add button.
10. Select the type of Notification (if you haven’t chosen your Default Notification
Method on your Contact record)
• Pager
• Fax
• E-mail
• Text Message
Finish Enrollment
11. When you have completed entering the information, click Save.
23
Map Offender’s Address
Clicking the Map button on the Offender Enrollment screen will generate a map that displays a
pushpin at the offender’s residence. Ensure that the pushpin location is correct and click the
Submit button. It is also possible to edit the location by clicking the Edit Pushpin button.
24
Offender General Information Page
When Enrollment has been completed, you will be redirected to the Offender General
Information page (see below). Here, you can Edit Offender Information, Disable the Offender,
View GPS Points, Unassign Hardware, Edit Rules, Send Alerts, and Download Points.
25
Create Schedule for Home Inclusion Zone
1. Click on the Home Rule (see below).
26
Create Schedule for Home Inclusion Zone, Cont.
2. Move your cursor over the Rules Functions drop-down menu and left click Edit.
27
Create Schedule for Home Inclusion Zone, Cont.
3. You will be redirected to the Edit Rule page. Scroll down to the Permanent Rule
Schedule.
28
Create Schedule for Home Inclusion Zone, Cont.
4. Each block represents a 30 minute increment of time. Left-click and drag the cursor along
the blocks during the times that the offender is required to be home. As you move the
cursor, the blocks will turn blue. The white blocks that remain equal the times that the
offender is allowed to be out of the home (see below).
5. Click the Save button.
29
Create Exclusion Zone
You can create an Exclusion Rule to ensure that the offender is not entering areas which are
forbidden – such as schools, playgrounds, and victims’ residences.
1. Move your cursor over the Rule Functions menu (see below). This will generate the Rule
Functions menu.
2. Click Add Zone.
30
Create Exclusion Zone, Cont.
3. Choose a Zone Shape.
4. Choose Exclusion as the Zone Type.
5. Click the Continue button.
31
Create Exclusion Zone, Cont.
6. Enter the Rule Name (school, playground, etc.).
7. Enter the address information and the zone size. The default is 600 ft.
8. Select Yes or No if you want to notify the offender upon violation.
9. Choose the appropriate Contact from the Notification Contact drop down list. The
contact’s default notification method will appear selected.
10. Click the Add button.
11. Click the Map button.
32
Create Exclusion Zone, Cont.
12. Ensure that the address and zone size is correct.
13. If you want to resize or move the zone, click the Move/Resize button.
14. If you move or resize the zone, click the Finish Move/Resize button.
15. Click the Submit button.
33
Attaching the 1 Piece
Step 1:
Step 2:
Step 3:
Charge the 1 Piece for a
minimum of two hours and
remove from the charger.
Press and hold the Activate
Button on the top of the 1
Piece.
Push tamper plugs into the
back of the brackets of the 1
Piece.
If the “PWR” LED is Green,
proceed with activation.
Be sure to insert the side
without the tamper plug tab
first (see above).
If the “PWR” LED is Red or
does not light up at all, the
1 Piece has not been
sufficiently charged.
After the right side has been
secured, press the left side
of the tamper plug down.
34
Attaching the 1 Piece, cont.
Step 4:
Step 5:
Step 6:
Place the pin tray on a flat,
stable surface (such as a
desk) and push one end of
the strap completely into
the pin tray.
Examine the strap to
ensure that it is cut evenly
and that there is no gap
between the end of the
strap and the edge of the
pin tray.
Insert strap with attached
pin tray into one side of
the 1 Piece until it snaps
in place.
35
Attaching the 1 Piece, cont.
Step 7:
Step 8:
Step 9:
Place the 1 Piece on the
offender’s leg, just above
the ankle bone.
Wrap the strap around the
offender’s leg and
measure to the edge of
the bracket, so that it
allows approximately ¼
inch of space between the
offender’s leg and the
strap to ensure comfort.
Use the strap cutters and
cut the strap according to
the measurement.
Note: Ensure that the end
of the strap has been cut
evenly.
36
Attaching the 1 Piece, cont.
Step 10:
Step 11:
Step 12:
Place the remaining pin
tray on a flat, stable
surface (such as a desk)
and push one end of the
strap completely into the
pin tray.
Examine the strap to
ensure that it is cut evenly
and that there is no gap
between the end of the
strap and the edge of the
pin tray.
Place the 1 Piece on the
offender’s leg, just above
the ankle bone. Wrap the
strap around the
offender’s leg and insert
the strap with attached
pin tray into the bracket
until it snaps in place.
37
Attaching the 1 Piece, Cont.
Step 13:
Step 14:
Ensure that all three lights
(PWR, GPS, and ZONE) on
top of the 1 Piece are off.
Press and hold the Activate Button on the top of the 1 Piece
until it vibrates.
A. The 1 Piece will vibrate once and the “PWR” LED will begin to
blink green, indicating the 1 Piece is powered on.
B. The “GPS” and “ZONE” LED’s will blink green once every
second. This indicates that the 1 Piece is attempting to make a
wireless call.
C. The “GPS” and “ZONE” LEDs will blink green twice every
second. This indicates that the 1 Piece is attempting to acquire
GPS. The 1 Piece must now be taken outside to acquire GPS.
D. Once GPS has been acquired, the 1 Piece will vibrate three
times. The “PWR” LED will continue to blink green and the
“GPS” and “ZONE” LEDs will stop blinking. This indicates that
activation has been successfully completed.
38
Unassigning Hardware
1. Move your cursor over the Hardware Functions dropdown menu and left click
Unassign.
39
Unassigning Hardware, Cont.
2. Click the checkbox next to the 1 Piece (see below).
3. Click on the drop-down menu and select a reason for unassignment. This is required.
40
Unassigning Hardware, Cont.
4. Click the Save button. A popup will generate with a warning that the unassignment
is immediate.
5. Click OK.
41
Unassigning Hardware, Cont.
6. You will be returned to the Offender Information page, where the hardware will be
pending unassignment. The device is now required to call Attenti and transmit its
final data. The hardware will only be unassigned once this final call has occurred.
42
Removing the 1 Piece
Step 1:
Step 2:
Step 3:
Use the strap cutters to
make a cut in the center of
the strap. Remove the
device from the offender’s
leg.
Use a flathead screwdriver
to press on the center of
the tamper plugs until the
head of the screwdriver
pierces the tamper plugs.
Use the screwdriver to
remove the tamper plugs
from the brackets.
43
Removing the 1 Piece, cont.
Step 4:
Step 5:
Use the screwdriver to
press down the latch
attached to the pin tray.
While keeping the latch
depressed, pull the strap
with the attached pin trays
out of each bracket.
Discard the tamper plugs
and straps.
Note: Do NOT reuse the
tamper plugs.
Note: Do NOT remove
tamper plugs from the
brackets of the 1 Piece
unless there is a strap with
an attached pin tray inside
the bracket.
44
Appendix
Rule Definitions
1 Piece GPS (TD4) Battery
•
The battery is getting low and the device needs to be charged. The device must be
charged for a minimum of two hours daily (the hours do not have to be
consecutive). When the battery needs to be charged, the device will vibrate three
times consecutively and then once every ten minutes until connected to the charger.
During this time, the Power LED will blink Red.
1 Piece GPS (TD4) Motion No GPS
•
Occurs when the 1 Piece has lost GPS for five minutes and then accumulates
excessive motion in a 60 minute period without receiving a signal from the GPS
satellites. The device will vibrate three times consecutively and once every ten
minutes until the violation has cleared by acquiring GPS. During this time, the GPS
LED will blink Red.
1 Piece GPS (TD4) Strap
•
The strap has been compromised or removed from the 1 Piece. There will not be any
notifications to the offender that this has occurred, unless the officer selects the
Notify Offender with Vibrate option on this rule.
1 Piece GPS (TD4) Unable to Connect
•
The 1 Piece has a defined call-in interval that is determined by the contract. If the 1
Piece is unable to call Attenti at its defined call-in interval, a default 90 minute grace
period will go into effect. If the default 90 minute grace period expires and the 1
Piece has still not called Attenti, the database will create this alarm. This is normally
due to poor cellular coverage in the area. The offender is not notified of the Unable
to Connect alarm. Once the 1 Piece is able to use the cellular network to call in, it
will report any violations that occurred during this time and download all tracking
data.
45
Rule Definitions, Cont.
1 Piece GPS (TD4) Tamper
•
The 1 Piece has been compromised in some form. There will not be any notification
to the offender that this has occurred, unless the officer selects the Notify Offender
with Vibrate option on this rule.
Geographic Rules
Zone Rules- The offender has violated a Zone set up by the user. The device will vibrate
three times consecutively and once every ten minutes while still in violation, if the
Notify With Vibrate feature is checked. The Zone LED will blink Red.
•
Inclusion Zone
o Geographic areas like home, work, or school where the offender is confined
during an officer defined schedule.
•
Exclusion Zone
o Geographic areas used to define off-limits areas to the offender.
46
1 Piece Self Test
To Begin the 1 Piece Self Test:
•
•
•
•
•
•
•
•
Make sure the 1 Piece is unassigned from any offenders.
Make sure the 1 Piece does NOT have a strap with a pin tray in it.
Make sure that the 1 Piece is in a good wireless and GPS location.
Press and hold the Activate Button until the 1 Piece vibrates.
The PWR/ZONE/GPS LEDs will begin to blink green, verifying the test is in progress.
Only the Zone and GPS LEDs will be utilized for the test.
The test results will be displayed on the Zone/GPS LEDs within 10 minutes.
To stop the test, press and hold the Activate button until it vibrates.
Test Results:
•
•
•
•
•
ZONE/GPS LED solid green = passed all tests.
ZONE/GPS LED blinking red ONE time = Modem Failure.
ZONE/GPS LED blinking red TWICE = GPS Failure.
ZONE/GPS LED blinking red THREE times = Tamper Failure.
The test results will be displayed on the Zone/GPS LEDs for one hour.
47
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This device is to be used solely by law enforcement agencies for tracking purposes and must be
professionally installed.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna
—Increase the separation between the equipment and receiver
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the U.S. Federal Communications Commission (FCC) rules
and is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
48
Exposure to Radio Frequency (RF) Energy:
This monitor contains radio transmitters and has been designed, manufactured and tested to
meet the Federal Communications Commission (FCC) guidelines for RF exposure and Specific
Absorption Rate when used in ankle worn configuration with a Attenti bracelet designated for
this product. The use of accessories not approved by Attenti Company may cause your device
to malfunction or in the case of unapproved electrical accessories may cause the device to
exceed RF energy exposure guidelines.
Additional information about RF safety can be found on the FCC website at
http://www.fcc.gov/oet/rfsafety.
Modifications to this device shall not be made without the written consent of Attenti Company.
Unauthorized modifications may void the authority granted under Federal Communication
Rules permitting the operation of this device.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Page Count                      : 48
Language                        : en-US
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Microsoft® Word 2016
Creator                         : Jason Abernethy
Creator Tool                    : Microsoft® Word 2016
Create Date                     : 2018:01:24 11:36:52-05:00
Modify Date                     : 2018:01:24 11:36:52-05:00
Document ID                     : uuid:E7E05788-9A07-41A1-9289-F2771DFF610C
Instance ID                     : uuid:E7E05788-9A07-41A1-9289-F2771DFF610C
Author                          : Jason Abernethy

EXIF Metadata provided by EXIF.tools