Attenti IDEU-830 Intelligent Data Extension Unit - IDEU-830 User Manual IDEU 830 Installation Guide

Download:
Mirror Download [FCC.gov]
Document ID	1354090
Application ID	b6n0DwjDRRWWsK9SpIJCyg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	17.49kB (218611 bits)
Date Submitted	2010-10-05 00:00:00
Date Available	2011-04-03 00:00:00
Creation Date	2010-10-03 13:58:04
Producing Software	Nitro PDF PrimoPDF
Document Lastmod	2010-10-03 13:58:04
Document Title	Microsoft Word - IDEU-830 Installation Guide
Document Creator	PrimoPDF http://www.primopdf.com
Document Author:	Aradd

IDEUIDEU-830
Home Unit
Installation and Operation
Operation Guide
Guide
Information in this documentation is subject to change without
notice and does not represent a commitment on part of
Elmo-Tech Ltd. The software described in this document is
subject to the license agreement that is included with the
product, which specifies the permitted and prohibited uses of
the product. Any unauthorized duplication or use of this
documentation, in whole or in part, in print, or in any other
storage or retrieval system is prohibited.
No part of this publication may be reproduced, transmitted,
transcribed, stored in a retrieval system, or translated into any
language in any form by any means for any purpose other than
the purchaser’s personal use without the permission of
Elmo-Tech Ltd.
© 2002-10 Elmo-Tech Ltd. All rights reserved.
Unless otherwise noted, all names of companies, products,
street addresses, and persons contained herein are part of a
completely fictitious scenario and are designed solely to
document the use of an Elmo-Tech product.
Contact Us
Corporate Headquarters
Elmo-Tech Ltd.
2 Ha-Barzel St.,
P.O. Box 13236,
61132 Tel Aviv, Israel
Tel: 972-3-7671800
Fax: 972-3-7671801
U.S.A Customers, call 1-800-313-1483
E-mail: contact@elmotech.com
Visit us at: www.elmotech.com
Table of Contents
Getting Started................................................................ 3
About This Manual .............................................................. 3
Installation & Activation Instructions ............................. 5
Locating the Home Unit....................................................... 6
Activating the Home Unit..................................................... 6
Maintaining & Packing the Monitoring Equipment ........... 9
Cleaning the Home Unit ...................................................... 9
FCC Information ............................................................ 10
STaR Unit & Transmitter
Transmitter Installation
Installation and Operation Guide
Guide
List of Figures
Figure 1 Home Unit .................................................................... 5
Figure 2 Locating the Home Unit .................................................. 6
ii
1
Getting Started
About This Manual
The Home Unit Installation and Operation Guide have been
created for the installation expert and are meant as a guide
through the installation and operational procedures. This manual
assumes that you have at least some experience with electronic
monitoring systems.
This manual does not contain information regarding system
settings, configuration or any other software produced by
Elmo-Tech Ltd., unless directly related to this produce.
Please refer to the appropriate manuals for information with
respect to the E3-MWS Monitor Operator and System
Administration manuals.
All related hardware and software must be installed and
repaired by a qualified Elmo-Tech customer service
representative or an experienced system administrator.
Elmo-Tech Ltd is committed to innovation and continued
improvement. Upgrades may be announced that consist of
software improvements and updated manuals will generally
accompany those system changes.
2
Installation & Activation Instructions
Figure 1 Home Unit
1Track Home Unit Installation and Operation Guide
Guide
Locating the Home Unit
Place the Home Unit as close to the center of the curfew location
as possible, 3 ft (1 m) off the ground and at least 1 foot (30 cm)
away from the wall.
Figure 2 Locating the Home Unit
Activating the Home Unit
To activate the Home Unit:
Connect the adapter end of the external power cable to the
power outlet. The Home Unit makes three audible beeping
sounds. The Charge LED on the front panel flashes when the
Home Unit is first activated.
1Track Home Unit Installation and Operation Guide
Guide
The Charge and Power LED’s light up only after the backup
battery is fully charged. The Home Unit is now in monitoring
mode.
To deactivate the Home Unit:
1. Using a screwdriver, unscrew and remove the Unit holding
screw located on the underside of the mounting bracket.
2. Disconnect the Home Unit from the mounting bracket by
pulling the Unit upwards slightly.
3. Remove the Home Unit from the mounting bracket and turn
the Unit over. The deactivation button is located on the
backside of the Unit.
4. Using a pointed instrument (but not sharp), push down on
the reset button. The Home Unit deactivates itself and all
stored information is deleted.
3
Maintaining & Packing the Monitoring
Monitoring
Equipment
Regular cleaning of your Elmo-Tech equipment is recommended,
using Elmo-Tech approved products.
After cleaning, Elmo-Tech recommends that you perform a
visual inspection of all Units to check for cracks or any other
damage, before redeploying into the field
Cleaning the Home Unit
To clean the Home Unit:
1. Remove the Unit from its carrying case.
2. Spray the surface of the Unit with an alcohol based cleaner
(optional).
Note Elmo-Tech recommends Citrus Base cleaner by 3M™
(http://solutions.3m.com/).
3. Using a damp cloth, wipe the outside of the Unit.
Caution: Do not, under any circumstances, submerge or
place the Unit under running water.
4. Using a dry cloth, or paper towel, dry the outside of the
Unit.
5. Once the Unit is dry, return it to its carrying case.
4
FCC Information
FCC ID: LSQ-IDEU-830
FEDERAL COMMUNICATIONS COMMISSION (FCC)
Part 15 STATEMENT
The equipment complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must
accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
1. Reorient or relocate the receiving antenna, 2. Increase the separation
between the equipment and the receiver, 3. Connect the equipment into an
outlet on a circuit different from that to which the receiver is connected, 4.
Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes or modifications not expressly approved by the
grantee of this device could void the user’s authority to operate the equipment.
10

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 12
Producer                        : Nitro PDF PrimoPDF
Create Date                     : 2010:10:03 13:58:04-02:00
Modify Date                     : 2010:10:03 13:58:04-02:00
Title                           : Microsoft Word - IDEU-830 Installation Guide
Creator                         : PrimoPDF http://www.primopdf.com
Author                          : Aradd

EXIF Metadata provided by EXIF.tools