Autec s r l FJRNF022 Remote Control Transceiver Unit User Manual LIFJRE00 01
Autec s.r.l. Remote Control Transceiver Unit LIFJRE00 01
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1919114 |
| Application ID | F7MP+aY0TIgnTNRFP1ffVA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 85.27kB (1065864 bits) |
| Date Submitted | 2013-03-18 00:00:00 |
| Date Available | 2013-03-18 00:00:00 |
| Creation Date | 2012-02-01 11:24:07 |
| Producing Software | Acrobat Distiller 7.0 (Windows) |
| Document Lastmod | 2013-02-06 15:27:55 |
| Document Title | LIFJRE00-01.fm |
| Document Creator | FrameMaker 7.2 |
| Document Author: | gabrielec |
Original instructions DYNAMIC SERIES Part C: FJR transmitting unit INDEX 1 Description ........................................................................................................... C - 2 2 Technical data ...................................................................................................... C - 3 3 Technical data sheet ........................................................................................... C - 3 4 Plates .................................................................................................................... C - 4 5 Light signals ........................................................................................................ C - 4 6 Malfunction signalled by the transmitting unit ................................................. C - 6 AUTEC LIFJRE00-01.fm Dynamic Series Part C: FJR transmitting unit ENG C-2 Description 1 Description connector for wire control (if present) actuators (joysticks, selectors, pushbuttons) STOP pushbutton display or LED (if present) LEDs START pushbutton S-KEY (electronic starting key) Dynamic Series Part C: FJR transmitting unit Technical data C-3 2 Technical data Power supply (battery MBM06MH)................................................................. NiMH 7.2 V Antenna ................................................................................................................... internal Housing material ........................................................................................... PA 6 (20% fg) Protection degree ....................................................................................... IP65 (NEMA 4) Dimensions ......................................................... 260 x 200 x 190 mm (10.2 x 7.9 x 7.5 In) Weight .......................................................................................................... 2.0 kg (4.4 Lb) Run time (at 20°C / 68°F) ............................................................................................ 11 h Run time with Data Feedback (at 20°C / 68°F) .......................................................... 9.5 h Run time with Low Power (at 20°C / 68°F) .................................................................. 14 h Run time with Data Feedback and Low Power (at 20°C / 68°F) ............................... 12.5 h 3 Technical data sheet The technical data sheet contains the transmitting unit configuration and shows the matching between commands sent and machine functions/movements. It also contains the wiring diagram showing the connection between the receiving unit and the machine. Each technical data sheet must be filled in, checked and signed by the installer, who is responsible for a correct wiring. A copy of the technical data sheet must always be kept together with this manual (always keep a copy of this data sheet for administrative purposes). The wiring of the receiving unit outputs must always reflect the wiring indicated in the technical data sheet. AUTEC LIFJRE00-01.fm Dynamic Series Part C: FJR transmitting unit ENG C-4 Plates 4 Plates The transmitting unit has three plates. Plate radio remote control identification plate Position Content On the S-KEY: remove the S- Radio remote control serial KEY to read the plate. number (S/N). Manufacturing year, bar code transmitting unit iden- In the battery housing: remove and transmitting unit identifitification plate the battery to read the plate. cation number (TU ID). technical data plate MODEL, TYPE and main In the battery housing: remove transmitting unit technical data, marking and possible the battery to read the plate. radio remote control marks. 5 Light signals The FJR transmitting units may have two or four LEDs. In both cases, two LEDs are always available, providing information regarding the radio remote control. - a green LED identified with - a red LED identified with The green LED ... ... is off Meaning The transmitting unit is switched off. ... blinks fast The transmitting unit is switched on and there is no radio link. ... blinks slowly The radio remote control is started and the radio link is present. Dynamic Series Part C: FJR transmitting unit Light signals The red LEDa ... Meaning ... is off The transmitting unit works correctly. ...blinks The battery is nearly flat. ... is on for 2 secondsb C-5 The transmitting unit does not work correctly. ... blinks onceb At power on, the transmitting unit detects that the STOP pushbutton is activated or damaged. ... blinks twiceb At power on, the transmitting unit detects that one of the commands D2-D20 or SAFETY is activated or damaged (see technical data sheet). ... blinks three timesb At power on, the transmitting unit detects that the battery is flat. ... blinks four timesb At power on, the transmitting unit detects that one of the commands A1-A8, L1-L8 and H1-H8 is activated or damaged (see technical data sheet). a. An acoustic signal is also heard when the red LED is illuminated. b. After this signal, the transmitting unit switches off. - If it has 4 LEDs, the side LEDs are red and provide information coming from the machine (Data Feedback function). AUTEC LIFJRE00-01.fm Dynamic Series Part C: FJR transmitting unit ENG C-6 Malfunction signalled by the transmitting unit 6 Malfunction signalled by the transmitting unit Use the light signals on the transmitting unit to identify the radio remote control malfunction. If the problem persists after the suggested solution has been carried out, contact the support service of the machine manufacturer. Signals Possible reason Solutions The green LED does not switch on when the START pushbutton is The battery is flat. pressed, even though both the battery and the S-KEY are inserted. Replace the battery with a charged one. The green LED blinks No radio link. fast. Bring the transmitting unit close to the receiving unit. The red LED switches on for 2 seconds and The transmitting unit then the unit switches does not work correctly. off. Perform the procedure to save the address.** Contact the support service of the machine manufacturer. Unlock the STOP pushbutton. The red LED blinks once The STOP pushbutton If this signal persists, contact the supduring start up. is locked or damaged. port service of the machine manufacturer. At least one of the actuators correspondThe red LED blinks twice ing to commands D2during start up. D20 and SAFETY is activated or damaged. Bring the actuators to the rest position. If this signal persists, contact the support service of the machine manufacturer. The red LED blinks three The battery is flat. times during start up. Replace the battery with a charged one. At least one of the actuators correspondThe red LED blinks four ing to commands A1A8, L1-L8, H1-H8 and times during start up. SAFETY is activated or damaged. Bring the actuators to the rest position. If this signal persists, contact the support service of the machine manufacturer. ** Procedure to save the address - press the STOP pushbutton - press the START pushbutton and do not release it until the green LED switches off - unlock the STOP pushbutton Dynamic Series Part C: FJR transmitting unit
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : gabrielec Create Date : 2012:02:01 11:24:07Z Modify Date : 2013:02:06 15:27:55+01:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Producer : Acrobat Distiller 7.0 (Windows) Creator Tool : FrameMaker 7.2 Metadata Date : 2013:02:06 15:27:55+01:00 Format : application/pdf Title : LIFJRE00-01.fm Creator : gabrielec Document ID : uuid:2cf901e3-9a24-4500-81c8-d47b57078970 Instance ID : uuid:1167702b-57e8-435a-ae8a-3e2cf611f732 Page Mode : UseOutlines Page Count : 8EXIF Metadata provided by EXIF.tools