Automotive Data Solutions TR2650A CAR ALARM(TWO WAY) User Manual
Automotive Data Solutions Inc. CAR ALARM(TWO WAY)
user manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3573269 |
| Application ID | KC3DpGAWffyd5L7EglFf8A== |
| Document Description | user manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 18.69kB (233654 bits) |
| Date Submitted | 2017-09-21 00:00:00 |
| Date Available | 2017-09-21 00:00:00 |
| Creation Date | 2017-09-18 17:52:40 |
| Producing Software | Acrobat Distiller 10.1.16 (Windows) |
| Document Lastmod | 2017-09-18 17:52:40 |
| Document Title | untitled |
| Document Creator | Adobe InDesign CC 2015 (Macintosh) |
ÂŽ/MD OWNERâS MANUAL TR2650A 2016/08 INSTRUCTIONS EN FRANĂAIS AU VERSO 2 IDATASTART OWNERâS GUIDE WELCOME TO IDATASTART Congratulations on the purchase of your iDataStart remote start system. Please take a moment to review the following table of contents to help you quickly access the information you need. iDataStart remote overview iDataStart remote functions & conďŹrmations 4-9 Programming a new iDataStart remote Replacing iDataStart remote batteries 10 Remote starting from your factory key fob 10 Adjusting engine runtime settings 11 Key takeover following remote start 11 When servicing your vehicle (Valet Mode) 12 Remote start troubleshooting 13 Vehicle shutdown troubleshooting 14 Limited lifetime warranty 15 FCC statement 16 SAR information statement 17-18 IC statement 19 Headquartered in Montreal, Canada, Automotive Data Solutions Inc. (ADS) is a privately held company specialized in the development and marketing of remote start and audio integration solutions destined for the automotive aftermarket. ADSâ award-winning products (marketed under the iDatalinkÂŽ, iDatalink MaestroÂŽ and iDataStartÂŽ brands) are sold and installed through a network of Authorized Dealers across North America, South America, Europe and Russia. For more information about ADSâ products and services, visit www.adsdata.ca. CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM IDATASTART OWNERâS GUIDE IDATASTART REMOTE OVERVIEW Your iDataStart remote start system may include one or both long-range remotes listed below. Please take a moment to familiarize yourself with their general features. CASING RELEASE BUTTON REMOTE MODEL TR2650A Technology Lora 2-WAY Max. Range 1 Mile Buttons Transmit ConďŹrmation (TX) Chime Receive ConďŹrmation (RX) LCD icon + Chime Batteries Required Avg. Battery Life Warranty CR2450 x 1 6-12 months 1 year CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM 4 IDATASTART OWNERâS GUIDE IDATASTART REMOTE FUNCTIONS & CONFIRMATIONS Your iDataStart LCD remote can pack over 30 functions using only 5 buttons. In order to get the most out of your remotes, please take a moment to get acquainted with the following functions below: NOTES: 1. 2. 3. 4. 5. 6. 7. 8. 9. All functions must be enabled by an Authorized Dealer during installation to be functional on remote Non-highlighted icons = Press & release button Highlighted (grey) icons = Press & hold button for 2.5 seconds Coma (,) between icons = Press buttons one after the other Plus (+) between icons = Press buttons together Timeout between each button press = 3 seconds Function* = Available in 2nd Car Mode When remote is on silent mode, no sound can be heard from the remote (no chirp!) For toggle functions, remote starter answered with (1, 2 or 3 chirps and blink on the remote (1: ON, 2: OFF, 3: IMPOSSIBLE) 10. If remote do 6 chirps and 6 blinks, remote is locked, you need to unlock it ďŹrst (Unlock remote) BUTTON(S) FUNCTION DESCRIPTION CONFIRMATION FEEDBACK Lock & Arm* Secures your vehicle by locking the doors and arming the alarm. 1 chirp, display Unlock & Disarm* Access your vehicle by unlocking the doors and disarming the alarm. 2 chirps, display -- 1 chirp, display CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM and and for 3 seconds. IDATASTART OWNERâS GUIDE BUTTON(S) FUNCTION DESCRIPTION CONFIRMATION FEEDBACK Query voltage: 1 chirp, display voltage (ex: ) for 3 seconds. Queries vehicle and vehicle battery voltage and interior temperature. Query* Query temperature: 1chirp, display temperature (ex: ) for 3 seconds. Query shut down error: 3 chirps, ) for 3 display error (ex: seconds. Panic* Triggers the panic siren. AUX 5* To be completed by Authorized Dealer if applicable 1 chirp, display Trunk Release* Releases the trunk or hatch. 1 chirp, display Engine Start/Stop* Starts and stops the engine. 1 chirp, 5 times. and ďŹash Engine start: 1 chirp, display Engine run: 4 chirps, display and remaining runtime. Start error: 1 long chirp, display start error. Engine stop: 3 chirps, display start error. AUX 1 To be completed by Authorized Dealer if applicable 1 chirp, display CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM 6 IDATASTART OWNERâS GUIDE BUTTON(S) FUNCTION DESCRIPTION CONFIRMATION FEEDBACK 1 chirp, display AUX 2 To be completed by Authorized Dealer if applicable AUX 3 To be completed by Authorized Dealer if applicable 1 chirp, display AUX 4 To be completed by Authorized Dealer if applicable 1 chirp, display 2nd Car Mode Controls two iDataStartequipped vehicles using one remote. Works with all functions marked with an asterisk (*). Same as 1st car. Silent Lock* Disables the vehicleâs horn and alarm siren. 1 chirp, display Silent Unlock* Disables the vehicleâs horn and alarm siren. 2 chirps, display Valet Mode ON/OFF Turns off remote start and security features when servicing your vehicle or valet parking. Keyless entry features remains functional. ,* Runtime Extend Seamlessly extends your engine runtime without restarting your vehicle. ON:1 chirp, display OFF: 2 chirps, and and disappears. 1 chirp, display runtime minutes (ex: CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM IDATASTART OWNERâS GUIDE BUTTON(S) FUNCTION DESCRIPTION Disables the vehicleâs horn and alarm siren even when alarm is triggered. Remote will still receive alarm notiďŹcation. Mute ON/OFF Shock Sensor ON/OFF Disables shock sensors if installed. CONFIRMATION FEEDBACK ON: 1 chirp, display OFF: 2 chirps, disappears. ON: 1 chirp, display OFF: 2 chirps, Ignition Lock ON/OFF Automatically locks doors when engine is running. Passive Lock & Arm ON/OFF Automatically locks & arms your vehicle 60 seconds after you unlock it. Turbo ON/OFF Cool down your turbo before turning the engine off. Programmable runtime from 1 to 4 minutes. disappears. ON: 1 chirp, display seconds. for 3 OFF: 2 chirps, display seconds. ON: 1 chirp, display seconds. for 3 for 3 OFF: 2 chirps, display seconds. ON: 1 chirp, display OFF: 2 chirps, CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM for 3 disappears. 8 IDATASTART OWNERâS GUIDE BUTTON(S) FUNCTION DESCRIPTION Set your vehicle to automatically remote start every 2, 3 or 4 hours (programmable) or from a temperature sensor sold separately. Weather Start ON/OFF Shows the remote technology on LCD for 3 seconds. CONFIRMATION FEEDBACK ON: 1 chirp, display OFF: 2 chirps, Query Remote Technology Query Remote Firmware Version Lock Remote Disables all functions on your remote. Unlock Remote ON/OFF Enables all functions on your remote. No beep on takeover ON: 1 chirp OFF: 2 chirps Invert function of query remote start ON: 1 chirp OFF: 2 chirps Mute Remote Toggle disappears. Displays remote technology (ex: AM = / FM = / SST = for 3 seconds. Displays ďŹrmware version (ex: ) for 3 seconds. To toggle between a silent remote or not (2). ON: 1 chirp + LCD backlight ďŹash 1 time. On button press: 6 chirps + 6 times and remote LCD backlight ďŹashes. ON: 2 chirps + LCD backlight ďŹash 2 times. Chirp OFF: 2 chirps, display for 3 seconds. Chirp ON: 1 chirp, displays 3 seconds. CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM for IDATASTART OWNERâS GUIDE BUTTON(S) FUNCTION DESCRIPTION CONFIRMATION FEEDBACK 1. Set time 2. Set alarm time 3. Set backlight ON/OFF 4. Set vibration on/off 5. Set chirp on/off 6. Set remote turn off time. up or on down or off next option Remote Settings 75% - 100% Battery Level Shows the remote battery level. 50% - 75% 25% - 50% 0% - 25% PROGRAMMING A NEW IDATASTART REMOTE Are you replacing a lost or damaged remote or simply adding an extra remote to your iDataStart system? Please take note of the following: 1. A functional iDataStart system must already be installed in your vehicle. 2. All new remotes must be installed by an iDataStart Authorized Dealer. 3. A maximum of 4 remotes can be programmed to your iDataStart system. CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM 10 IDATASTART OWNERâS GUIDE REPLACING IDATASTART REMOTE BATTERIES Follow the steps below to replace the batteries in your iDataStart remotes OR scan the QR code below to view a video tutorial. 1. 2. 3. 4. 5. 6. 7. Insert a 25 cent coin into the hollow (bottom left) corner of your iDataStart remote. Gently twist the coin until the casing pops open. Use your coin to pry open the rest of the case perimeter. Carefully remove the circuit board from the case. Slide the old battery out of its enclosure and replace with the new battery. Carefully replace the circuit board into bottom half of the casing. Snap top and bottom casings back together using your hands. REMOTE STARTING FROM FACTORY KEY FOB Available on most vehicles, your iDataStart system will enable remote start functionality from your factory key fob as follows: BUTTON PRESS FUNCTION 3x rapidly Start engine 3x rapidly Stop engine Remote start range will vary by key fob. If your iDataStart system does not include long range remotes, you may still add iDataStart remotes (sold separately) at a later date. Ask your iDataStart Authorized Dealer for details. CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM IDATASTART OWNERâS GUIDE 11 ADJUSTING ENGINE RUNTIME SETTINGS Once remote started from your factory key fob or long-range remote, your vehicle will run for the programmed âruntimeâ setting. The default runtime is 15 minutes but it can also be programmed for 3, 5, 10, 25, 30 or 35 minutes. If you wish to change your remote start runtime setting, contact your iDataStart Authorized Dealer. KEY TAKEOVER FOLLOWING REMOTE START Available on some vehicles, the âkey takeoverâ procedure ensures that your engine does not turn off when entering the car during the remote start runtime, following a remote start command. Follow the instructions below or scan the QR code to view a video tutorial. For Standard Key Vehicles 1. 2. 3. 4. Unlock and enter vehicle Close doors Insert key into ignition and turn ignition to ON position Press foot brake For Push-To-Start Vehicles 1. Unlock and enter vehicle with valid smartkey 2. Close doors 3. Press foot brake NOTE: To prevent your vehicle from shutting down, complete the steps below within the programmed delay time (45 seconds, 90 seconds, 3 minutes or 4 minutes). Key takeover procedure may vary by vehicle, ask your iDataStart Authorized Dealer for deatails. CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM 12 IDATASTART OWNERâS GUIDE WHEN SERVICING YOUR VEHICLE To ensure safety during vehicle servicing, the remote starter must be placed in âValet Modeâ. The âValet Modeâ will disable remote start functionality. To activate or deactivate the âValet Modeâ, follow the instructions below or scan the QR codes to view a video tutorial. With Vehicle Key FUNCTION Valet Mode ON Valet Mode OFF ACTION # OF PARKING LIGHT FLASHES Cycle ignition OFF/ON 2x rapidly, then press brake 3x. With iDataStart Remote FUNCTION Valet Mode ON Valet Mode OFF ACTION # OF PARKING LIGHT FLASHES Turn ignition ON, then press With iDataStart Antenna FUNCTION Valet Mode ON Valet Mode OFF ACTION # OF LED & PARKING LIGHT FLASHES Turn ignition ON, then press & hold button for 5 seconds CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM IDATASTART OWNERâS GUIDE 13 REMOTE START TROUBLESHOOTING If your iDataStart remote fails to start the vehicle, the parking lights will ďŹash three times immediately, then ďŹash a number of times according to the errors below: # OF PARKING LIGHT FLASHES DIAGNOSTIC SOLUTION 3+1 Engine is already running Turn engine OFF 3+2 Key in ignition at ON position Remove key from ignition 3+4 Trunk is open Close trunk 3+5 Foot brake is ON Release foot brake 3+6 Hood is open Close hood 3+8 Tach failure Contact Authorized Dealer 3 + 10 System is in Valet Mode Exit Valet Mode 3 + 11 Can communication failure Contact Authorized Dealer CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM 14 IDATASTART OWNERâS GUIDE VEHICLE SHUTDOWN TROUBLESHOOTING If the remote start sequence has been completed and the vehicle shuts down, the vehicleâs parking lights will ďŹash 4 times immediately, then ďŹash a number of times according to the errors below: # OF PARKING LIGHT FLASHES DIAGNOSTIC SOLUTION 4+1 No engine rev detected Turn ignition ON before trying to remote start 4+3 Foot brake detected Release foot brake 4+4 Hood open detected Close hood 4+5 Engine revving over 3000 RPM Check your accelerator pedal 4+6 Glow plug error Contact Authorized Dealer 4+7 Vehicle speed sensor error Contact Authorized Dealer 4+8 âCheck Engineâ light detected Clear âCheck Engineâ code 4+9 Low fuel detected Add fuel 4+10 Door open detected Close door 4+11 CAN communication failure Contact Authorized Dealer 4+13 Key takeover not allowed Key fob not detected OR Takeover procedure not completed correctly OR takeover is not available for your vehicle 4+14 Module overheat protection Contact Authorized Dealer CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM IDATASTART OWNERâS GUIDE 15 LIMITED LIFETIME WARRANTY Automotive Data Solutions Inc. (âADSâ) warrants to the original purchaser of the iDataStart product that the following components product shall be free of defects in material and workmanship under normal use and circumstances: Control module and installation harnesses For as long as the original purchaser owns the vehicle in which it was originally installed. Remote transmitters and antenna For the period of one (1) year from the date of original installation. Excludes battery replacement. In the event of any product malfunction during the Warranty period, the original purchaser must return to the Authorized Dealer where it was originally purchased with the original proof of purchase. If a malfunction is detected, the Authorized Dealer will elect to repair or replace the product at its discretion. Labor costs may be applicable and are at the discretion of the Authorized Dealer. THE LIMITED LIFETIME WARRANTY IS AUTOMATICALLY VOID IF: ⢠An original proof of purchase is not provided when servicing the product during the warranty period; ⢠The date code and/or serial number is defaced, missing, or altered; ⢠The iDataStart product is transferred to another vehicle; ⢠The vehicle in which the product was originally installed is transferred to a new owner. ADS is not responsible for any damages whatsoever, including but not limited to any consequential damages, incidental damages, damages for loss of time, loss of earnings, commercial loss, loss of economic opportunity and the like that may or may not have resulted from the installation or operation of an iDataStart product. CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM 16 IDATASTART OWNERâS GUIDE FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modiďŹcations not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ⢠⢠⢠⢠Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM IDATASTART OWNERâS GUIDE 17 SAR Information Statement 5IF wireless CAR ALARM (TWO WAY) is a radio transmitter. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientiďŹc organizations through periodic and thorough evaluation of scientiďŹc studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless CAR ALARM (TWO WAY)s employs a unit of measurement known as the SpeciďŹc Absorption Rate, or SAR. The SAR limit set by the FCC is W/kg.The highest SAR value for this model CAR ALARM (TWO WAY) when tested for use at the extremity is 0.047 W/Kg . While there may be differences between the SAR levels of various CAR ALARM (TWO WAY) and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model CAR ALARM (TWO WAY) with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model CAR ALARM (TWO WAY) is on ďŹle with the FCC and can be found under the Display Grant section of http://www.fcc.gov/ oet/fccid after searching on FCC ID:2AEPJ-TR2650A This device complies with FCC and ISED 10-g extremity SAR requirements when the device is used at 0 mm separation. Changes or modiďŹcations not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM 18 IDATASTART OWNERâS GUIDE IC statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and. (2) This device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End user must follow the speciďŹc operating instructions for satisfying RF exposure compliance. Thistransmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The device is designed to meet the requirements for exposure to radio waves established by theFederal CommunicationsCommission (USA). These requirements set a SAR limit of W/kg, averaged over one gram of tissue. The highest SAR value reported under. This standard during product certiďŹcation for use when properly test at the extremityis 0.047 W/kg. Le prĂŠsentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitationestautorisĂŠe aux deux conditions suivantes: l'appareil ne doit pas produire de brouillage, et l'utilisateur de l'appareildoit accepter tout brouillageradioĂŠlectriquesubi, mĂŞmesi le brouillageest susceptible d'encompromettre le fonctionnement. CetĂŠquipementestconforme aux limitesd'exposition aux rayonnements de la IC dĂŠďŹnies pour un environnement non contrĂ´lĂŠ. L'utilisateur ďŹnal doit respecter les instructions de fonctionnement spĂŠciďŹques pour satisfaire la conformitĂŠ aux expositions RF. CetĂŠmetteur ne doit pas ĂŞtre co-localisĂŠesouopĂŠrant en conjonction avec uneautreantenneouĂŠmetteur. L'appareil mobile estconçu pour rĂŠpondre aux exigences en matièred'exposition aux ondes radio ĂŠtabliespar la Federal Communications Commission (Etats-Unis). CesexigencesdĂŠďŹnissent la valeur SAR limite Ă W/kg, en moyenne pour un gramme de tissu.La valeur SAR la plus ĂŠlevĂŠe pour cemodèledâalarme de voiture (deuxvoies) lorsquâilesttestĂŠ pour uneutilisation Ă lâextrĂŠmitĂŠest de 0.047 W/ Kg Cetappareilrespecte les exigences de 10 g extrĂŠmitĂŠ SAR FCC et ISED lorsquelâappareilestutilisĂŠlors de la sĂŠparation de 0 mm. CAN ICES-3 (B)/NMB-3(B) CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM Operation Frequency: 915 MHz Channel numbers: 1 Modulation technology: LoRa Antenna Type: Internal Antenna Antenna gain: -1.25dBi Max power:30dBm ÂŽ/MD CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Create Date : 2017:09:18 17:52:40+08:00 Creator : Adobe InDesign CC 2015 (Macintosh) Modify Date : 2017:09:18 17:52:40+08:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2017:09:16 11:47:17+08:00 Creator Tool : Adobe InDesign CC 2015 (Macintosh) Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 25285 bytes, use -b option to extract) Instance ID : uuid:d2ab3d12-88d3-4df3-8142-ab6fdfbe1eba Original Document ID : xmp.did:BB11186F4C206811822A94D671965F64 Document ID : xmp.id:6ecb21fb-a974-415e-841c-616578178ed1 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:85580a60-cd6f-49e4-90b8-b5a0a7605586 Derived From Document ID : xmp.did:85580a60-cd6f-49e4-90b8-b5a0a7605586 Derived From Original Document ID: xmp.did:BB11186F4C206811822A94D671965F64 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2015 (Macintosh) History Changed : / History When : 2016:08:02 15:15:29-04:00 Format : application/pdf Title : untitled Producer : Acrobat Distiller 10.1.16 (Windows) Trapped : False N Pages : 1 Has Visible Transparency : False Has Visible Overprint : True Max Page Size W : 133.000043 Max Page Size H : 133.000043 Max Page Size Unit : Millimeters Font Name : DINPro-Light, DINPro-Bold, DINPro-Cond, DINPro-CondMedium, DINPro-CondBold Font Family : DINPro, DINPro, DIN Pro, DIN Pro, DIN Pro Font Face : Light, Bold, Condensed, Condensed Medium, Condensed Bold Font Type : Open Type, Open Type, Open Type, Open Type, Open Type Font Version : Version 7.460;PS 7.046;hotconv 1.0.38, Version 7.460;PS 7.046;hotconv 1.0.38, Version 7.504; 2005; Build 1004, Version 7.504; 2005; Build 1004, Version 7.504; 2005; Build 1005 Font Composite : False, False, False, False, False Font File Name : DINPro-Light_1.otf, DINPro-Bold_3.otf, DINPro-Cond_3.otf, DINPro-CondMedium_1.otf, DINPro-CondBold_2.otf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Group Name : 默认色板组 Swatch Groups Group Type : 0 Page Count : 19EXIF Metadata provided by EXIF.tools