Axesstel MV240 Dual-band CDMA USB Modem User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1124047
Application ID	A38VDeHgeZIjsTKxY+kFNw==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	40.37kB (504648 bits)
Date Submitted	2009-06-14 00:00:00
Date Available	2009-12-11 00:00:00
Creation Date	2009-03-17 14:15:16
Producing Software	Acrobat Distiller 8.1.0 (Windows)
Document Lastmod	2009-06-09 17:40:12
Document Title	Microsoft Word - MV200 Series_User Manual_STD_Ver 0.1_20090311
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Charles Yoo

MV210 / MV220 / MV230 / MV240
-1-
MV200 Series User’s Manual (STD Ver. 0.1)
▪ Copyright
Axesstel Inc. (www.axesstel.com) holds the copyright to
this user manual. This user’s manual may not be
reproduced, distributed or changed in any form without
permission from Axesstel Inc.
▪ Registered Trademark
The registered trademarks appearing in this user
manual are owned by their respective companies.
▪ Confidential & Proprietary
This user manual is the intellectual property of Axesstel
Inc. and its technical material cannot be copied or used
without the permission of Axesstel Inc.
-2-
MV210 / MV220 / MV230 / MV240
Templates .............................................. 16
Sending SMS......................................... 16
Table of Contents
SETTINGS .......................................... 17
SAFETY NOTICE ..................................4
PRODUCT INTRODUCTION .................5
PRODUCT FEATURES .........................5
PRODUCT COMPONENTS ..................6
NAMES OF PARTS ...............................7
INSTALLING THE PROGRAM ..............8
DELETING THE PROGRAM .................9
INITIAL SETUP ................................... 10
Internet .................................................. 17
Modem................................................... 18
SMS ....................................................... 18
ETC. ...................................................... 18
MEMO ................................................. 19
When Using UIM (SIM) Card .................... 10
When Not Using UIM (SIM) Card ............. 10
USING INTERNET ..............................13
USING SMS ........................................ 14
InBox ..................................................... 15
SimInBox ............................................... 15
SavedBox .............................................. 15
OutBox .................................................. 16
DraftBox ................................................ 16
-3-
MV200 Series User’s Manual (STD Ver. 0.1)
Safety Notice
This safety notice is to help protect the user’s safety
and prevent any property damage or inconvenience
due to accidents. Please use the product properly after
thoroughly understanding the following notice.
Please read this manual’s notice carefully in order to
use the product safely and properly.
Caution
• Do not disassemble, rebuild or repair the device
through one's own discretion.
• Do not to use the device in areas where the use of
mobile phones is prohibited.
• When in hospitals and medical centers, use the
device according to rules and regulations.
• Do not use the device on airplanes.
• Keep the device out of the reach of children.
• Do not touch or use the device with wet hands.
• Do not use the device outdoors in weather with
thunder and lightning.
Notice
• Be careful because the device could be damaged or
altered if it struck or thrown (and dropped).
• If the device malfunctions, be sure to take it to the
specified service center.
• Keep the device and PC’s USB ports clean.
• Do not use or store with magnetic storage media.
• Do not use or store in extremely hot or cold places
or places with extreme temperature changes.
• If the modem is disconnected from the PC while it is
on, data could be lost. Shut down all programs and
disconnect the modem after the power LED is
turned off.
• When running a notebook computer on its battery,
the device will use additional power, causing the
notebook battery to be consumed somewhat faster.
• When using the modem with a desktop PC,
maintain at least 50 cm distance from the wall.
-4-
MV210 / MV220 / MV230 / MV240
Product Introduction
Product Features
Thank you for purchasing the Axesstel MV200 Series.
General Features
The MV200 Series is a CDMA 1x EV-DO Rev. A type
•
•
•
•
•
•
•
USB Data Modem that can freely use wireless internet
anytime and anywhere.
This model supports various frequencies according to
USIM Support (optional)
Internet
Short Message Service (SMS)
Auto Installation (WHQL certified)
Operating Temperature: -20 °C ~ +50 °C
Storage Temperature: -30 °C ~ +80 °C
Humidity: 5 ~ 95 %
the model names shown below, and each model has
Technical Features
optional USIM support.
• MV210: Supports 450 MHz
• MV220: Supports 800 MHz
• MV230: Supports 1900 MHz
• MV240: Supports 800/1900 MHz
•
•
•
•
•
•
•
•
•
-5-
Internal Type Antenna (Intenna)
Uses PC power (No Battery / Charges from the USB port)
Backwards compatible with IS-95 A/B, CDMA2000 EV-DO
Rev. A and 1x.
IS-2000 data rates up to 153.6kbps in forward and reverse CH.
IS-856 data rates up to 3.1Mbps forward and 1.8Mbps reverse
channel
USB 1.1 interface
Software interface: IS-707 AT Command set & Qualcomm
Extended AT command + Axesstel extended AT Command set
Max power consumption: < 500mA (24dBm, USB Port Power)
Standby Output Power: < -61dBm
MV200 Series User’s Manual (STD Ver. 0.1)
Data Rate
Product Components
Under EVDO Rev. A network
The MV200 Series product components are as follows.
•
•
Downloads: Up to 3.1 Mbps
Uploads: Up to 1.8 Mbps
* Note: The data speeds shown above may vary according
to the operator’s network status.
Mechanical Features
•
•
LEDs: RSSI and Power indication
Dimension: 35mm(W) × 92mm(H) × 9.6mm(D)
FCC Compliance Information
MV200 Device
Quick installation
USB Extension
Guide
Cable (optional)
* Note: The pictures in this user manual are only used to
demonstrate the modem’s functions, so they may be
This device complies with Part 15 of FCC Rules.
different from what you see on your modem. Please refer to
Operation is subject to the following two conditions:
your modem if there are any differences.
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received.
Including interference that may cause undesired operation
-6-
MV210 / MV220 / MV230 / MV240
System Requirements
Names of Parts
Front View
• OS: Microsoft Windows 2000, XP and Vista
(Driver support only: selected Linux versions
and MAC Tiger 10.4 & Leopard 10.5)
RSSI LED
Power LED
(1) Recommended Specifications
• CPU: Pentium III 550Mhz or higher
• RAM: 256MB or more
• VGA: Video card with1024 I 768 resolution and
65536 or more colors
• HDD: 200MB or more hard disk space
• Others: CD-ROM Drive or DVD Drive
Side View
(2) Minimum Specifications
• CPU: Pentium II 300Mhz or higher
• RAM: 128MB or more
• VGA: Video card with1024 I 768 resolution and
65536 or more colors
• HDD: 100MB or more hard disk space
• Others: CD-ROM Drive or DVD Drive
RF Cable Port
USIM Port
USB Port
-7-
MV200 Series User’s Manual (STD Ver. 0.1)
LED Operation
Installing the Program
The MV200 Series has 2 LEDs, and the LEDs indicate
When first installing the modem on your PC, disable
the status of the device as follows.
any firewalls in order to install it without problems.
LED
Power
Data
(RSSI)
Data
(RSSI)
Color
Description
1. Connect the USB dongle to the PC.
None
No power supplied
Red
Power supplied
None
No Signal
Red
Weak signal
Purple
Medium Signal
USB port angle of rotation as
Blue
Good Signal
shown in the picture so that is
* Note: Adjust the MV200 Series’
appropriate for the user
environment.
-8-
MV210 / MV220 / MV230 / MV240
Deleting the Program
2. When the device
is recognized by
The method for deleting the AxessManager program
the PC, the program
from the PC is as follows.
will automatically
begin installation.
1. On the taskbar, click [Start] - [Program] - [Axesstel] [AxessManager MV200] – [Uninstall].
* Note: Depending on your PC’s status and specifications,
2 or 3 minutes will be needed to install the program.
3. When the installation completes successfully,
AxessManager will run automatically as shown below.
2. When the window appears asking if you want to
uninstall the program, click Yes and the program will
begin uninstallation.
Modem Connect/Disconnect
Setting
SMS
Internet Connect/Disconnect
-9-
MV200 Series User’s Manual (STD Ver. 0.1)
Initial Setup
The initial setup for the product after purchase is as
follows. MV200 supports both UIM and Non UIM types.
problems. You can enter the PIN up to 3 times, and if you
forget the PIN, contact the place of purchase.
3. AxessManager will be popped up
When Using UIM (SIM) Card
1. Insert properly activated
4. After this, follow the below When Not Using UIM
UIM card provided by the
(SIM) Card section’s instruction and complete the
company into the UIM port..
initial settings.
2. Connect the USB
When Not Using UIM (SIM) Card
dongle to the PC.
(Connect the USB dongle to the PC)
If you insert a UIM
card with a PIN
1. In the AxessManager window, click [Setting].
lock set, the Verify PIN window will appear and you
must enter the password.
* .Note: After normally entering the PIN password, you can
use the internet with AxessManager without any other
- 10 -
MV210 / MV220 / MV230 / MV240
• Connect Name: Enter the name of the service
provider which will appear in the options window.
• Phone: Enter the phone number for modem access.
(The default is “#777”)
2. In the Options window, click [New].
* Note: The default number is set #777 but depending on the
country and the network operator, the set number may be
• New: Register a new internet service provider.
• Delete: Delete a registered internet service provider.
• Properties: View or modify a registered internet
service provider’s info.
• Modem: Set the current location info for modem
connections.
3. In the New window, enter the internet settings and
click [Save].
different, so register the product and set it to the number set
by the network operator you are using.
• User Name: Enter the User ID used by the network
operator if needed.
• Password: Enter the password for internet
connections.
• Remember Password: Set the password to be
saved and automatically entered when connecting
to the internet.
- 11 -
MV200 Series User’s Manual (STD Ver. 0.1)
4. Select a network operator registered in the Selected
Service Provider list and click the [Select] button.
In the Modem tab, go to the PIN section and click
Disabled and then click the [Apply] button.
Changing the PIN
Enter the Old Pin and the new PIN that you want, then
re-enter the new PIN in the Verify field and click the
[Apply] button.
5. Click the
button to close the Options window.
Now the basic settings for connecting to the internet
are complete.
Setting the PIN
You can choose
whether to use a
PIN password
through the
following method.
- 12 -
MV210 / MV220 / MV230 / MV240
Using Internet
3. When connected to the internet, the [Connect to
Internet] icon will turn blue and the connection time
▪ Connecting to the Internet
and sent/received data will be displayed.
1. In the AxessManager window, click the [Connect to
Internet] icon.
* Note: After connecting to the Internet, web browsers and
other such programs can be used the same as when
connected through a wired connection.
2. As shown below, the program will attempt to connect
to the internet and if successful, a notification window
will appear. Click [OK].
- 13 -
MV200 Series User’s Manual (STD Ver. 0.1)
▪ Disconnecting from the Internet
Using SMS
1. In the Axess-
▪ Modem Connection
Manager window,
The method for connecting to the modem for SMS
click [Disconnect
usage is as follows.
to Internet].
2. As shown below, the connection will be ended and a
1. In the AxessManager window, click the Modem
Connect button (
notification window will appear. Click the [OK] button.
3. When disconnected from the internet, the [Connect
to Internet] icon turns purple and the connection time
).
2. The SMS Icon will become activated.
and sent/received
data all appear as
'0’.
- 14 -
MV210 / MV220 / MV230 / MV240
▪ Running the SMS Manager
▪ Using the SMS Manager
The method for running the SMS manager is as follows.
InBox
In the InBox, you can reply
1. Click the SMS icon.
to received messages, send
messages
and
delete
messages.
SimInBox
When using an USIM card,
all messages are saved on
2. As shown below, the SMS Manager window appears,
which can send or receive SMS messages.
the USIM card, and you can
check the received and
replied messages in the
SimInBox
SavedBox
In the SavedBox, you can
reply to received messages,
send messages and delete
messages.
- 15 -
MV200 Series User’s Manual (STD Ver. 0.1)
OutBox
Sending SMS
In the OutBox, you can
The method for sending SMS messages with the SMS
check messages that have
Manager is as follows.
been sent. Also, you can
select
messages
and
1. In the Message Box, click the [New] button.
forward or delete them.
2. Enter the receiving number for
DraftBox
In the DraftBox you can
the SMS and enter the
check messages that have
message.
not been sent but have
been saved. Also, you can
select
messages
and
forward or delete them.
* .Note: You can send a maximum of
10 messages at once with the SMS
Manager.
Templates
You can enter often-used
3. If you check the ‘Deliver Report’
item and click the [Send] button
messages in the Templates
to send the message, a
section.
window will appear with the
results.
- 16 -
MV210 / MV220 / MV230 / MV240
▪ Disconnecting the Modem
Settings
The method for disconnecting the modem is as follows.
You can change the settings for using the modem and
the internet. While using the modem, click the Setting
1. In the AxessManager window, click the Modem
Connect (
icon.
) button.
2. The SMS icon will become deactivated and the
modem connection will terminate.
Internet
Manage the settings
for connecting
to the internet in the
Internet tab.
- 17 -
MV200 Series User’s Manual (STD Ver. 0.1)
Modem
You can set the Data
Mode
and
the
user
password in the Modem
tab.
SMS
In the SMS tab, you can
choose whether to Auto
Erase messages for when
the internal memory space
is too low.
ETC.
In the ETC. tab, you can reset
the device and check the model
name and S/W version.
- 18 -
MV210 / MV220 / MV230 / MV240
Memo
- 19 -
Safety Information
1 . SAFETY INFORMATION FOR FIXED WIRELESS TERMINALS
.POTE NTIALLY EXPLOSIVE ATMOSPHERES
Turn your phone OFF when in any area with a potentially explosive atmosphere and
obey all signs and instructions. Sparks in such areas could cauls e an explosion or fire
resulting in bodily injury or even death.
INTERFERENCE TO MEDICAL DIVICES
Certain electronic equipment may be shielded against RF signal from you wireless
phone. (pacemakers, Hearing Aids, and so on) Turn your phone OFF in health c are
facilities when any regulations posted in these areas instruct you to do so. RF signals
may affect improperly installed or inadequately shielded electronic system in motor
vehicles.
.EXPOSURE TO RF ENERGY
Use only the supplied or an approved replacement antenna. Do not touch the antenna
unnecessarily when the phone is in use. Do not move the antenna close to, or
couching any exposed part of the body when making a call.
SAFETY INFORMATION FOR RF EXPOSURE
Body worm operation
This device was tested in multiple notebook computer configurations with USB port
configurations for typical near-body operations with the back of the USB Modem kept 5
mm from body. to maintain compliance with FCC RF exposure requirements it can be
used in notebook computers with substantially similar physical dimensions,
construction, and electrical and RF characteristics, and that maintain a minimum 5 mm
separation distance between the user’s body and the back of the USB Modem,
including the antenna. the antenna(s) used for this USB Modem must not be colocated or must not operate in conjunction with any other antenna or transmitter within
a host device.
SAR INFORMATION
THIS MODEL PHONE MEETS THE GOVERNMENT’S
REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to
exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal
Communications Commission of the U.S. Government. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for the general population. The guidelines
are based on standards that were developed by independent scientific organizations through
periodic and thorough evaluation of scientific studies. The standards include a substantial safety
margin designed to assure the safety of all persons, regardless of age and health. The exposure
standard for wireless mobile phones employs a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. *
Tests for SAR are conducted with the phone transmitting at its highest certified power level in all
tested frequency bands. Although the SAR is determined at the highest certified power level, the
actual SAR level of the phone while operating can be well below the maximum value. This is
because the phone is designed to operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to a wireless base station antenna, the
lower the power output. Before a phone model is available for sale to the public, it must be tested
and certified to the FCC that it does not exceed the limit established by the government adopted
requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear
and worn on the body) as required by the FCC for each model. The highest SAR value for this
model phone when tested for use at the body is 1.11 W/Kg. (Body-worn measurements differ
among phone models, depending upon available accessories and FCC requirements). While there
may be differences between the SAR levels of various phones and at various positions, they all
meet the government requirement for safe exposure. The FCC has granted an Equipment
Authorization for this model phone with all reported SAR levels evaluated as in compliance with the
FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can
be found under the Display Grant section of http://www.fcc.gov/ oet/fccid after searching on FCC ID:
PH7MV240.
Additional information on Specific Absorption Rates (SAR) can be found on the Cellular
Telecommunications Industry Asso-ciation (CTIA) web-site at http://www.wow-com.com. * In the
United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg
(W/kg) averaged over one gram of tissue. The standard incorporates a sub-stantial margin of safety
to give additional protection for the public and to account for any variations in measurements.
U.S.A.
U.S.FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE STATEMENT
INFORMATION TO THE USER
NOTE : This equipment has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful Interference in a residential installation This equipment
generates, uses, and can radiate radio frequency energy and, if Not installed and used in
accordance with the instructions, may cause harmful Interference to radio communications.
However, there is no guarantee that interference will not occur in a particular Installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
*- Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
*- Connect the equipment into an outlet of a circuit different from that to which the receiver is
connected.
*- Consult the dealer or an experienced radio/TV technician for assistance.
Changes or modification not expressly approved by the party responsible for Compliance
could void the user’s authority to operate the equipment. Connecting of peripherals requires
the use of grounded shielded signal cables.
MV200 Series User’s Manual (STD Ver. 0.1)
- 20 -

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-702
Format                          : application/pdf
Creator                         : Charles Yoo
Title                           : Microsoft Word - MV200 Series_User Manual_STD_Ver 0.1_20090311
Create Date                     : 2009:03:17 14:15:16+09:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2009:06:09 17:40:12+09:00
Metadata Date                   : 2009:06:09 17:40:12+09:00
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Document ID                     : uuid:bde4a0c1-b6e5-4563-8559-09fb80a545b1
Instance ID                     : uuid:5d6a9c06-e42e-430a-b9a0-099425477922
Page Count                      : 23
Author                          : Charles Yoo

EXIF Metadata provided by EXIF.tools