AzureWave Technologies UR500 Range Maximizer-515 User Manual Range Mzximizer 515 QG EN indd

Download:
Mirror Download [FCC.gov]
Document ID	640294
Application ID	7l049nnyn9Tfr+AHRiNtzQ==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	79.81kB (997588 bits)
Date Submitted	2006-03-23 00:00:00
Date Available	2006-03-23 00:00:00
Creation Date	2006-03-07 10:12:11
Producing Software	Adobe PDF Library 6.0
Document Lastmod	2006-03-23 17:28:54
Document Title	Range Mzximizer 515_QG_EN.indd
Document Creator	Adobe InDesign CS (3.0.1)

Range Maximizer - 515
Hardware Installation
1. Connect the antenna with the Range Maximizer 515.
2. Plug the power connector into the AC-in port on the unit,
and plug the other end into a power outlet.
3. Connect the Range Maximizer 515 with your PC or notebook via a LAN cable.
Auto-Link
After the hardware connection is ready, use the Auto-Link
button on the bottom of the unit for quick wireless network
setup.
Press the Auto-Link button, the Range Maximizer 515 will
automatically detect the wireless network and configure all
settings. The whole process takes about 10 seconds.
If no wireless network is found, either click Rescan to
search for available wireless networks, or click CANCEL
to exit setup wizard.
5. If you wish to create a new wireless network, click Manual Setup at the left column.
7-2. WPA Encryption Setup
In the WPA encription seup screen, enter the passphrase or pre-shared key in the Passphrase field.
This key must be between 8~63 characters in length.
6. Enter a specific name (SSID) for this new wireless network.
Auto-Link Button
RESET
AUTO LINK
Power Connection
After configuration is finished, click NEXT to continue.
8. Wait for few seconds.
7. Select a encryption type from the drag-down menu for
your wireless network.
Configuration
1. Insert the Utility CD into the CD-ROM of your PC, which
should run automatically. Follow the on-screen to complete the installation.
LAN Connection
If not, click the Start button and choose Run. Type E:\
setup.exe into the entry field to run the utility CD. (“E:\” is
the CD-ROM drive label.)
Placement
Beside placing the UR flately on an object, you can also use
the buckle on the back of the UR and a fixed nail to straight
the UR up on the wall.
7-1. WEP Encryption Setup
a. WEP auth: This is to set the WEP authorization
level. Select from Open System, Shared Key, or
Both.
b. Key size: This is the level of WEP encryption. Select from h64-bit or 128-bit.
c. Transmit WEP Key: There are 4 groups of the
transmit WEP keys. Select from Key 1 to Key 4.
d. WEP Key #: “#” represents the number of the
Transmit WEP key. There are two types of WEP
key, one is ASCII, and the other is HEX. The settings of each WEP key type are different.
i. ASCII:
For 64-bit encryption, use 5 letters (“A” through
“Z”). For example, ‘abcde’, or ‘zyxwv’.
For 128-bit encryption, use 13 letters (“A” through
“Z”). For example, ‘abcdefghijklm’, or ‘zyxwvutsrqpon’.
ii. HEX:
For 64-bit encryption, use 10 hexadecimal characters.
For 128-bit encryption, use 26 hexadecimal
characters.
• Hexadecimal characters are the combination
of letters “A” through “F”, and the numbers “0”
through “9”.
4. The setup wizard will search for available wireless networks. When found, they will appear as a list. Click on
the appropriate network, and then click NEXT and go to
STEP 8 to continue.
Reset Default
Press the reset button on the bottom of the Range Maxmizer
for 4 seconds to reset all settings to their factory default setting.
Reset Button
RESET
2. Activate the UR Utility from Start Menu, and then the PC
will search for the Universal Repeater (UR) device. Click
NEXT to continue the configuration.
3. Enter your account name and password. Click NEXT to
continue the installation.
9. Setup is complete. Click FINISH to exit this setup wizard
Note: All devices in the wireless network must use the
same WEP key.
AUTO LINK
Sepcifications
Standard
IEEE 802.11g/IEEE802.11b
Port
Ethernet
Buttons
Auto link, Reset
LEDs
(1) Link: Ethernet (Orange)
(2) Activity: Wireless (Blue)
(3) Power: Power (Green)
Transmit Power
802.11g: Typ. 14±1 1dBm@Normal Temp Range
802.11b: Typ. 17±1 1dBm@Normal Temp Range
Security
Features
WEP (64/128-bit keys,)
WPA-PSK
Dimensions
86(L) x 61(W) x 19.2(T) mm
Power
Input: 100~240V AC 0.15A
Output: 5V DC 1A
Operating Temp
0oC to 40oC (32oF to 104oF)
Storage Temp
-20oC to 70oC (-4oF to 158oF)
Operating Humidity
10% to 90% RH
Storage Humidity
5% to 95% RH
Wireless Channels
By country
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should
be installed and operated with minimum distance 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
IEEE 802.11b or 802.11g operation of this product in the U.S.A. is firmware-limited to channels 1 through 11.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Copy, Fill forms, Extract, Assemble, Print high-res
Modify Date                     : 2006:03:23 17:28:54+08:00
Create Date                     : 2006:03:07 10:12:11Z
Trapped                         : False
Creator                         : Adobe InDesign CS (3.0.1)
Producer                        : Adobe PDF Library 6.0
Page Count                      : 2
About                           : uuid:3dbf3493-5824-4744-8567-551538389210
Creation Date                   : 2006:03:07 10:12:11Z
Mod Date                        : 2006:03:23 17:28:54+08:00
Metadata Date                   : 2006:03:23 17:28:54+08:00
Creator Tool                    : Adobe InDesign CS (3.0.1)
Rendition Class                 : proof:pdf
Derived From Instance ID        : c4701c39-ad7f-11da-b85d-9a8d3c091dfc
Derived From Document ID        : adobe:docid:indd:c4701c38-ad7f-11da-b85d-9a8d3c091dfc
Document ID                     : adobe:docid:indd:c4701c3a-ad7f-11da-b85d-9a8d3c091dfc
Format                          : application/pdf
Title                           : Range Mzximizer 515_QG_EN.indd

EXIF Metadata provided by EXIF.tools