B and W Electronics Development 13BW05003 Bluetooth Keyboard User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2040150
Application ID	SHDaIOxVYX8BDC93ow0bGg==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	210.43kB (2630433 bits)
Date Submitted	2013-08-12 00:00:00
Date Available	2013-08-12 00:00:00
Creation Date	2013-08-07 16:57:06
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2013-08-07 16:57:10
Document Title	User manual
Document Creator	Adobe InDesign CS6 (Windows)

Tablet Bluetooth Keyboard
and Case for iPad
Model Number: BW05003-3
INSTRUCTION MANUAL
After Sales Support
Telephone:
Email:
1 866 235 5029
mp656@messageplex.com
Contents
Welcome
General Safety Instructions
Parts List
Features
Getting Started
Instructions
Other Useful Information
Repair and Refurbished Goods or Parts Notice
10
12
After Sales Support
Telephone:
Email:
1 866 235 5029
mp656@messageplex.com
Welcome
Congratulations on choosing to buy a BAUHN® product.
All products brought to you by BAUHN® are manufactured to the highest standards
of performance and safety and, as part of our philosophy of customer service and
satisfaction, are backed by our comprehensive 2 Year Warranty. We hope you will enjoy
using your purchase for many years to come.
After Sales Support
Telephone:
Email:
1 866 235 5029
mp656@messageplex.com
General Safety Instructions
Read this manual thoroughly before first use, even if you are familiar with this type
of product. Keep the manual in a safe place for future reference, along with the
completed warranty card, purchase receipt and carton. If applicable, pass these
instructions on to the next owner of the appliance.
• In order to prevent environmental factors (dampness, dust, food, liquid etc.) harming
the Tablet Case and Bluetooth Keyboard (short: the product), only use it in a well
ventilated, clean and dry environment, away from excessive heat or moisture.
• Keep the product away from direct sunlight or heat sources.
• Only charge the product via the supplied USB cable. Do not charge it any other way.
• In case of damage, do not disassemble, repair or modify the product yourself.
Contact the after sales support line for advice on repair or replacement, or refer
servicing to qualified personnel only.
• This product is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the product by a
person responsible for their safety.
• Children should be supervised to ensure they do not play with the product.
• Keep the product away from sharp objects.
• Do not put any object on top of the product.
• Do not expose the product to microwaves.
• Do not twist or distort the keyboard.
• Keep the product away from oils, chemicals or any other organic liquids.
• Use water or alcohol based disinfectants for cleaning the silicone keyboard.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation
NOTE:
This equipment has been tested and found to comply with the limits for a Class B
digital device. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy, and if not installed and used in accordance with the
instructions, may cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on. In case of interference, try to correct
the interference by one of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•
Consult an experienced radio/TV technician, or contact our after sales support line
for help.
Modifications not expressly approved by the manufacturer could void the user’s
authority to operate the equipment under FCC rules.
After Sales Support
Telephone:
Email:
1 866 235 5029
mp656@messageplex.com
Parts List
Holding frame for tablet
USB Charging cable
Keyboard
Bluetooth indicator light
Bluetooth connect button
Power indicator light
Power on/off switch
Charging interface
After Sales Support
Telephone:
Email:
1 866 235 5029
mp656@messageplex.com
Features
Compatibility
The Bluetooth Keyboard can be connected to iPad 2, 3, 4 iPhone 3G, 3GS, 4, 4S, 5
and iPod Touch, iOS4.0 or later, Mobile Internet Devices (MID), Smartphones, PCs and
other bluetooth enabled devices. For other bluetooth enabled devices, please verify the
bluetooth standard and compatibility before attempting to connect to the keyboard.
NOTE: Depending on the operating system and version of the connected device,
some function keys may not work.
Features
Bluetooth 3.0 interface with BROADCOM 20730 as main control chip
WIDCOMM BTW Bluetooth technology, officially approved by Microsoft
Stylish protective PU leather case with tablet display stand for easy viewing
Lightweight, quiet keystroke design, dust-proof and spill-proof
Energy saving keyboard with sleep mode
After Sales Support
Telephone:
Email:
1 866 235 5029
mp656@messageplex.com
Getting Started
Before first use
• Unpack the product but keep all packaging materials until you have made sure
your new Tablet Bluetooth Keyboard and case is undamaged and in good working
order. Plastic wrapping can be a suffocation hazard for babies and young children,
so ensure all packaging materials are out of their reach.
• Inspect the USB cable for damage. Do not use the product if the product or the
USB cable have been damaged or are not working properly.
Charging
Before first use, the Bluetooth Keyboard needs to be charged. During use, a flashing
‘power’ light indicates that the battery power is low and the device needs recharging.
To charge/recharge the device:
Step 1: Connect the USB cable’s micro connection to the keyboard charging interface.
Step 2: Connect the USB cable’s regular connection to the computer’s USB interface.
Step 3: The green ‘charge’ indicator light will stay on when the keyboard is charging.
Once fully charged, the green indicator light will turn off.
Step 4: After you have finished charging, disconnect the USB cable, taking care not to
damage the USB interface.
Powering on/off
•
Slide the Power On/Off switch to the ‘On’ position. The blue ‘Bluetooth’ and the
red ‘Power’ indictors will illuminate for 4–5 seconds and then go off.
•
After use, always turn off the power to extend the battery life.
Slide the Power On/Off switch to the ‘Off’ position to power off.
Storage
•
If you intend not to use the Bluetooth Keyboard for an extended time, make sure
it is fully charged before storing it away. Storing it with a depleted battery will
shorten the lifespan of the keyboard’s internal lithium battery.
After Sales Support
Telephone:
Email:
1 866 235 5029
mp656@messageplex.com
Instructions
Pairing the Bluetooth Keyboard with an iPad
The following instructions are for pairing the product with an iPad.
Step 1: Slide the Power On/Off switch to the ‘On’ position. The blue ‘Bluetooth’ and
the red ‘Power’ indictors will illuminate for 4–5 seconds and then go off.
Step 2: P
 ress the ‘Connect’ button, the red ‘Power’ light will be on and the blue
‘Bluetooth’ light will start blinking. The Bluetooth Keyboard is now ready
for connection to your iPad.
Power switch
Connect button
Step 3: Turn on and unlock the iPad. In menu mode, press Settings --> General -->
Bluetooth --> Devices --> Bluetooth keyboard found. Click on the device to
pair with it.
Select the Settings icon.
Open the Bluetooth setting.
After Sales Support
Telephone:
Email:
1 866 235 5029
mp656@messageplex.com
Instructions (Cont.)
Step 4: Enter the password code displayed on the screen, then press the Enter key.
The Bluetooth Keyboard will show up as
Bluetooth Keyboard “Not Paired”. Select.
You will now be prompted to enter a PIN
using your keyboard.
Step 5: Upon successful connection, the Bluetooth Keyboard will be listed as
“Connected”.
NOTE: D
 o not fold the cover of the Bluetooth Keyboard while it is still in use.
After Sales Support
Telephone:
Email:
1 866 235 5029
mp656@messageplex.com
Other Useful Information
Troubleshooting guide
Unable to connect
1.
Make sure the Bluetooth Keyboard is within its effective working range (32ft).
2.
Make sure the Bluetooth Keyboard is still paired. If not, pair the units again.
3.
If the Bluetooth Keyboard is connected to any other Bluetooth products, please
cancel, turn off the keyboard and pair again.
4.
Check the battery power and recharge the unit, if necessary.
If none of the solutions offered above help you solve your problem, contact our after
sales support line for advice.
10
After Sales Support
Telephone:
Email:
1 866 235 5029
mp656@messageplex.com
Other Useful Information (Cont.)
Specifications
Executive standard
Bluetooth V3.0
Working distance
32 feet
Modulation system
FHSS 2.4G
Transmitting power
Class 2
Operating voltage
3.0-5.0V
Working current
<4.0mA
Standby current
≤1mA
Sleeping current
<200μA
Charging current
100mA
Standby time
60 days
Uninterrupted working time
30 hours
Charging time
4~4.5 hours
Lithium polymer battery capacity
400mAH
Lithium polymer battery life
3 years
Lithium polymer battery specifications
4 x 25 x 40mm
Key life
5 million
Operation temperature
-20°C~55°C
Storage temperature
-40°C~70°C
Humidity
20%-50%
Responsible disposal
At the end of its working life, do not throw this device out with your household
rubbish. Electrical and electronic products contain substances that can have a
detrimental effect on the environment and human health if disposed of inappropriately.
Observe any local regulations regarding the disposal of computer products and
dispose of it appropriately for recycling. Contact your local authorities for advice on
disposal/recycling facilities in your area.
After Sales Support
Telephone:
Email:
1 866 235 5029
mp656@messageplex.com
11
Tablet Bluetooth Keyboard
and Case for iPad
Warranty Card
Unfortunately, from time to time, faulty products are manufactured which need to be returned
to the supplier for repair.
Please be aware that if your product is capable of retaining user-generated data (such as
files stored on a computer hard drive, telephone numbers stored on a mobile telephone,
songs stored on a portable media player, games saved on a games console or files stored
on a USB memory stick) during the process of repair, some or all of your stored data may be
lost. We recommend you save this data elsewhere prior to sending the product for repair.
You should also be aware that rather than repairing goods, we may replace them with refurbished
goods of the same type or use refurbished parts in the repair process.
Please be assured though, refurbished parts or replacements are only used where they meet
ALDI’s stringent quality specifications. Please complete the warranty section below and
enclose this with your purchase docket to the address on the bottom of this page.
Your details:
Name
Address
E mail
Date of purchase*
* We recommend you keep the receipt with this warranty card.
Location of purchase
Description of malfunction:
ALDI Customer Service
NW Fulfilment
549 Heartland Drive
Suite E
Sugar Grove IL 60554
After Sales Support
Telephone:
Email:
1 866 235 5029
mp656@messageplex.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Create Date                     : 2013:08:07 16:57:06+01:00
Metadata Date                   : 2013:08:07 16:57:10+01:00
Modify Date                     : 2013:08:07 16:57:10+01:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Instance ID                     : uuid:6d4ee3a6-7c53-42ba-b6d6-64a24cc6fe5b
Original Document ID            : xmp.did:D8180544375ADE11ABF3D93E14BA9971
Document ID                     : xmp.id:267273EF79FFE211832BC0907DB5360C
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:257273EF79FFE211832BC0907DB5360C
Derived From Document ID        : xmp.did:F1CB1D893FB0E111BF05847260F7B423
Derived From Original Document ID: xmp.did:D8180544375ADE11ABF3D93E14BA9971
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2013:08:07 16:57:06+01:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 12
Creator                         : Adobe InDesign CS6 (Windows)

EXIF Metadata provided by EXIF.tools