BARCO AMM215WTTP LCD Color Display User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2645943
Application ID	Ya/ya73CxrkG8tsQ0PYW1w==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	148.8kB (1860047 bits)
Date Submitted	2015-06-12 00:00:00
Date Available	2015-06-12 00:00:00
Creation Date	2015-05-18 14:53:05
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2015-05-18 14:53:17
Document Title	Users Manual
Document Creator	Adobe InDesign CS6 (Windows)

USER’s GUIDE
AMM215WTTP
LCD Color Display
Rev.B
Rev.A
Table of Contents
Warnings and Cautions
Warnings...................................................................................................................... 2
Cautions....................................................................................................................... 3
Symbol Definitions........................................................................................................ 4
Usage Notice
Precautions.................................................................................................................. 9
Introduction
10
About AMM215WTTP Series.......................................................................................10
Touch Screen for AMM215WTTP ................................................................................10
Package Overview ......................................................................................................11
Installation
13
Product Overview........................................................................................................13
Front View...............................................................................................................13
Bottom View (Without Stand) ..................................................................................13
VESA Mount for Your Monitor......................................................................................14
Start Your Installation..................................................................................................15
Connecting the Display................................................................................................16
Figure......................................................................................................................17
User Controls
18
Side Panel Controls.....................................................................................................18
How to Use the OSD Menus........................................................................................19
On-Screen Display Menus...........................................................................................20
Appendix
21
Troubleshooting...........................................................................................................21
Warning Signal............................................................................................................22
No Signal.................................................................................................................22
Going to Sleep............................................................................................................22
Out of Range...........................................................................................................22
Product Dimensions....................................................................................................23
Compatibility Modes....................................................................................................24
Touch Screen Driver Installation..................................................................................25
AMM215WTTP Driver Install Instructions.................................................................25
Description of Warranty
27
The information contained in this document is subject to change without notice.
This document contains proprietary information that is protected by copyright. All rights
are reserved. No part of this document may be reproduced,translated to another language
or stored in a retrieval system, or transmitted by any means, electronic, mechanical,
photocopying, recording, or otherwise, without prior written permission. Windows is a registered
trademark of Microsoft, Inc. Other brand or product names are trademarks of their respective
holders.
Caution!
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Warnings and Cautions
Please read this manual and follow its instructions carefully. The words warning, caution, and
note carry special meanings and should be carefully reviewed:
Warning The personal safety of the patient or physician may be involved. 		
Disregarding this information could result in injury to the patient or
physician.
Caution Special service procedures or precautions must be followed to avoid
damaging the instrument.
Note
Special information to make maintenance easier or important information
more clear.
A lightning bolt within a triangle is intended to warn of the presence of 		
hazardous voltage. Refer all service to authorized personnel.
Warranty is void if any of these warnings are disregarded.
ADVAN Int’l Corp accepts full responsibility for the effects on safety, reliability, and
performance of the equipment only if:
‧Re-adjustments, modifications, and/or repairs are carried out exclusively by ADVAN Int’l
Corp.
‧The electrical installation of the relevant operating room complies with the applicable IEC
and CE requirements.
Warning Federal law (United States of America) restricts this device to use by,
or on order of a physician.
ADVAN Int’l Corp's AMM215WTTP monitor has been tested under ANSI/AAMI ES60601-1
standard for Medical application.
ADVAN Int’l Corp reserves the right to make improvements in the product(s) described
herein. Product(s), therefore, may not agree in detail to the published design or
specifications. All specifications are subject to change without notice.
Please use rear cover page with ADVAN contact points or phone your local ADVAN Int’l Corp
sales representative or agent for information on changes and new products.
Warnings
Warning TO AVOID POTENTIAL SERIOUS INJURY TO THE USER AND THE 		
PATIENT AND/OR DAMAGE TO THIS DEVICE, THE USER MUST :
1. Read the operating manual thoroughly and be familiar with its contents prior to using this
equipment.
2. Carefully unpack the unit and check if any damage occurred during shipment.
3. Should any solid object or liquid fall into the panel, unplug the unit and have it checked
by qualified personnel before operating it any further.
4. Uplug the unit if it is not to be used for an extended period of time. To disconnect the 		
cord, pull it out by the plug. Never pull the cord itself.
5. Be a qualified physician, having complete knowledge of the use of this equipment.
6. Test this equipment prior to a medical procedure. This monitor was fully tested at the 		
factory before shipment.
7. Avoid removing covers on control unit to avoid electric shock.
8. Attempt no internal repairs or adjustments not specifically detailed in this operating 		
manual.
9. Pay close attention to the care, cleaning instructions in this manual. A deviation may 		
cause damage (refer to the Cleaning section).
10. DO NOT STERILIZE MONITOR.
11. Read the entire instruction manual before assembling or connecting the camera.
12. Do not place the monitor or any other heavy object on the power cord. Damage to the
cable can cause fire or electirc shock.
13. Monitor with power supply is suitable for use in patient environment.
14. DO NOT stack more than "6" boxes high.
15. To avoid risk of electric shock, this equipment must only be connected to supply mains
with protective earth.
16. Do not modify this equipment without authorization of the manufacturer.
17. Power cord is used as a disconnection device. To de-energize equipment, disconnect the
power cord. ME Equipment should be placed easily powered off place.
This equipment has been tested and found to comply with the limits for medical devices in
IEC 60601-1-2. These limits are designed to provide reasonable protection against harmful
interference in a typical medical installation.
NOTICES TO USER
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Cautions
1. The AC Adapter must be plugged into a grounded power outlet.
2. Use only the proprietary AMM215WTTP power supply for the AMM215WTTP monitor.
3. Turn power off when unit is not in use. Disconnect the power plug from AC outlet if the
product is not going to be used for an extended period of time.
4. Never operate the unit right after having transported from a cold location directly to a 		
warm location.
5. Do not expose the monitor to moisture or directly apply liquid cleaners directly to the 		
screen. Spray the cleaning solution into a soft cloth and clean gently.
6. Handle the monitor with care. Do not strike or scratch the screen.
7. Do not block the monitor cooling vents. The monitor is cooled by natural convection and
has no fan.
8. Do not force the monitor past 28 degrees of vertical when adjusting the screen position.
(For monitors equipped with stands only.)
9. Remove the power module and connection when transporting the unit.
10. Save the original carton and associated packing material. They will be useful should you
have to transport or ship the unit.
11. Allow adequate air circulation to prevent internal heat buildup.
12. Do not place the unit on surfaces (rugs, blankets, etc.) or near materials (curtains, 		
draperies) that may block the ventilation slots.
13. Do not install the unit near sunlight, excessive dust, mechanical vibration or shock.
14. The unit is designed for operation in a horizontal position. Never operate the unit in a 		
vertical position.
15. Keep the unit away from equipment with strong magnets (i.e. a large loudspeaker.)
16. Equipment with SIP/SOP connectors should either comply with IEC 60601-1 and/or
IEC 60601-1-1 harmonized national standard or the combination should be evaluated.
Do not touch the patient with signal input or output connectors.
17. Use only a hospital grade power supply cord.
18. This equipment has been tested and found to comply with the limit for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable generate uses and can radiate radio frequency energy, if not installed 		
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in 		
a particular installation, which can be detemined by turning the equipment off and on, the
user is encourage to try to correct the interference by one or more of the following
measures:
‧Reorient or relocate the receiving device.
‧Increase the separation distance between the equipment.
‧Connect the equipment to an outlet on a circuit different from that to which the
other device(s) are connected.
‧Consult the manufacturer or field service technican for help.
19. Grounding reliability can only be achieved when the equipment is connected to an 		
equipment receptacle labeled “Hospital Only” or “Hospital Grade.”
Caution
Caution
To connect to an international power supply, use a an attachment plug 		
appropriate for the power outlet.
Refer to the “Electromagnetic Compatibility” (EMC) section of this manual
to ensure EMC. The AMM215WTTP must be installed and operated 		
according to the EMC information provided in this manual.
Symbol Definitions
General warning sign
of risk of danger
For indoor use only.
Dangerous: High Voltage
Tested to comply with FCC
Class B standards.
Direct Current
DC power control switch
Fragile, handle with care
Serial Number
This way up
Stacking limit by number
Keep dry
Recyclable
Medical Equipment
With respect to electric shock,
fire and mechanical hazards
only in accordance with ANSI/
AAMI ES60601-1(2005/(R)2012
51LJ
+ A1:2012, C1:2009/(R)2012 +
E472062
A2:2010/(R)2012), and CSA-C22.2
NO. 60601-1:14 Edition 3 - 		
Revision Date 2014.01.01
IPX1
Indicates proof of conformity
to applicable European 		
"Economic Community Council"		
directives and to harmonized
standards published in the
official journal of the European
			 Communities.
Authorized Representative in
Europe
Date of Manufacture
Manufacturer
Tested to comply with IP
(ingression protection) Rating
WEEE symbol for the 		
recyclable product. Please do
not throw the product with this
symbol in the bin.
Consult instructions for use
EU Declaration of Conformity for Medical Applications
A Declaration of Conformity has been filed for this product. A sample of this document may
be found in the addendum which accompanied this manual. For a copy of the Declaration
of Conformity document, please contact ADVAN Int’l Corp. and request for AMM215WTTP
DOC.
Cleaning Your Monitor
Turn off the product before cleaning. No specific liquid or chemical is necessary when
cleaning this LCD monitor. However, it is suggested to use a soft cloth moistened with mild
detergent to clean the display housing.
To clean the screen, do not spray liquid cleaners directly on to the unit. Spray cleaning
solution onto a cloth, and without applying excessive pressure, clean the screen.
Caution: Do not use abrasive cleaners, waxes or solvents for your cleaning.
This monitor is intended for use in Health Care Facilities Model AMM215WTTP Equipment is
not suitable for use in the presence of flammable anesthetic mixture with air or with oxygen
or nitrous oxide.
No user serviceable parts inside, ask qualified personnel when accessing inside.
This product contains electrical waste or electronic equipment. It must not be disposed of as
unsorted municipal waste and must be collected separately.
Electrical input rating: 12V DC 3A
Classification
Type of protection against electric shock: Class I Equipment.
Degree of protection against the ingress of water: IPX1 compliance.
Mode of operation: Continuous
This monitor has been tested to comply with IEC/EN 60601-1, IEC/EN60601-1-2 and is
certified by UL to medical standard(UL/cUL Mark).
Because many medical offices are located in residential areas, this monitor, in addition to the
medical requirements, has also been tested and found to comply with
the limits for FCC Class B computing devices in a typically configured system. It is the
system integrator or configurer’s responsibility to test and ensure that the entire
system complies with applicable EMC laws.
Environmental conditions for transport and storage:
- Temperature range within -4° to 140° F (-20° to 60°C)
- Relative humidity range within 10% to 90%
- Atmospheric pressure range within 500 to 1060 hPa.
- Operating within 0° to 40°C
Environmental conditions for operating:
- Operating temperature range within 32° to 104° F (0° to 40°C)
Electromagnetic Compatibility
Like other electrical medical equipment, the AMM215WTTP requires special precautions to
ensure electromagnetic compatibility with other electrical medical devices. To ensure
electromagnetic compatibility (EMC), the AMM215WTTP must be installed and operated
according to the EMC information provided in this manual.
Note
The AMM215WTTP has been designed and tested to comply with
EN 60601-1-2 requirements for EMC with other devices.
Caution
Portable and mobile RF communications equipment may affect the
normal function of the AMM215WTTP.
Warning Do not use cables or accessories other than those provided with
the AMM215WTTP, as this may result in increased electromagnetic emissions
or decreased immunity to such emissions.
Warning If the AMM215WTTP is used adjacent to or stacked with other 		
equipment, observe and verify normal operation of the AMM215WTTP in the		
configuration in which it will be used prior to using it in a surgical procedure.
Consult the tables below for guidance in placing the AMM215WTTP.
Manufacturer's Declaration - Electromagnetic Emission
The Model AMM215WTTP is intended for use in the electromagnetic environment specified below.
The user of AMM215WTTP should assure that it is used in such an environment.
Emission test
Compliance Electromagnetic Environment - Guidance
The Model AMM215WTTP uses RF energy only for its internal
RF emissions CISPR 11
Group 1
function. Therefore, its RF emissions are very low and are not likely
to cause any interference in nearby electronic equipment
RF emissions CISPR 11
Class B
AMM215WTTP is suitable for use in all establishments, including
Harmonic emissions
Class D
domestic establishments and those directly connected to the public
IEC61000-3-2
low-voltage power supply network that supplies buildings used for
Voltage Fluctuations
Complies
domestic purposes
IEC61000-3-3
Manufacturer's Declaration - Electromagnetic Immunity
The Model AMM215WTTP is intended for use in the electromagnetic environment specified below.
The user of AMM215WTTP should assure that it is used in such an environment.
Electromagnetic
Immunity Test
IEC 60601 Test Level
Compliance Level
Environment - Guidance
Floors should be wood,
concrete or ceramic tile.
Electrostatic discharge
If floors are covered with
6 kV contact
6 kV contact
(ESD)
synthetic material, the
8 kV air
8 kV air
IEC61000-4-2
relativehumidity should be
at least 30%.
Mains power quality
Electrical fast transient
2 kV for power supply lines 2 kV for power supply lines should be that of a typical
/burst IEC61000-4-4
1 kV for input / output lines 1 kV for input / output lines commercial or hospital
environment
Mains power quality
should be that of a typical
Surge
1 kV differential mode
1 kV differential mode
commercial or
IEC61000-4-5
2 kV common mode
2 kV common mode
hospital environment.
Power frequency magnetic
fields should be at levels
Power frequency
characteristic of a typical
(50/60Hz) mag-netic field
3.0 A/m
3.0 A/m
location in a typical
IEC 61000-4-8
commercial orhospital
environment.
Mains power quailityshould
<5% Ut (>95% dip in Ut) <5% Ut (>95% dip in Ut)
be that of a typicalcommercial
for 0.5 cycle
for 0.5 cycle
or hospitalenvironment. If the
user of the AMM215WTTP
40% Ut (60% dip in Ut)for 40% Ut (60% dip in Ut)
image intensifier
Voltage dips, short
for 5 cycles
5 cycles
requirescontinued operation
interruptions andvoltage
during power mains
variations onpower supply
70% Ut (30% dip in Ut)for 70% Ut (30% dip in Ut)
interruptions, it is commended
inputlines IEC61000-4-11
for 25 cycles
25 cycles
that the AMM215WTTP image
intensifier bepowered from an
<5% Ut (>95% dip in Ut) <5% Ut (>95% dip in Ut)
uninterruptible power supply
for 5 sec.
for 5 sec.
or a battery.
Note: Ut is the A.C. mains voltage prior to application of the test level.
Manufacturer's Declaration - Electromagnetic Immunit
The Model AMM215WTTP is intended for use in the electromagnetic environment specified below. The customer
or the user of AMM215WTTP should ensure that it is used in such an environment.
Immunity Test
IEC 60601 Test Level Compliance Level
Electromagnetic Environment - Guidance
Portable and mobile RF communications
equipment should be used no closer toany
part of the AMM215WTTP, includingcables,
than the recommended separationdistance
calculated from the equationapplicable to the
frequency of thetransmitter.
Recommended Separation Distance0.15 MHz
to 80 MHz
80 MHz to 800 MHz
Conducted RF
IEC61000-4-6
3 Vrms
150 KHz to 80 MHz
3 Vrms
150 KHz to 80 MHz
Radiated RF
IEC 61000-4-3
3 Vrms
800 MHz to 2.5 GHz
3 Vrms
800 MHz to 2.5 GHz
800 Mhz to 2.5GHz
where P is the maximum output power
rating of the transmitter in watts (W)
according to the transmitter manufacturer
and is the recommended separation
distance in meters (m). Field strengths from
fixed RF transmitters,as determined by an
electromagneticsite survey (a), should be less
than the compliance level in each frequency
range(b).Interferency may occur in the vicinity
of equipment marked with the following
symbol:
NOTE 1: At 80MHz and 800MHz, the higher frequency range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption
and reflection from structures, objects, and people.
(a) Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and land
mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast, connot be predicted theoretically
with accuracy. To assess the electromagnetic environment due to fixed RF transmitters, an electromagnetic site
survey should be considered. If the measured field strength in the location in which the AMM215WTTP is used
exceeds the applicable RF compliance level above, the AMM215WTTP should be observed to verify normal
operation. If abnormal performance is observed, additional measures may be necessary, such as reorienting or
relocating the AMM215WTTP.
(b) Over the frequency range 150kHz to 80MHz, field strengths should be less than [V1] V/m.
Recommended Separation Distances Between Portable and Mobile RF Communications
Equipement and the AMM215WTTP System
The AMM215WTTP system is intended for use in an electromagnetic environment in which radiated RF
disturbances are controlled. The user of the AMM215WTTP system can help prevent electromagnetic
interference by maintaining a minimum distance between portable and mobile RF communications
equipment (transmitters) and the AMM215WTTP system as recommended below, according to the maximum
output power of the communications equipment.
Rated maximum output
Separation distance (m) according to frequency of transmitter
150kHz to 80MHz
80MHz to 800MHz
800MHz to 2.5GHz
power (W) of transmitter
d=1.17,
d=1.17,
d=2.33,
0.01
0.12
0.12
0.23
0.1
0.37
0.37
0.74
1.17
1.17
2.33
10
3.70
3.70
7.37
100
11.70
11.70
23.30
For transmitters rated at a maximum output power not listed above, the recommended separation distance (d)
in meters (m) can be estimated using the equation applicable to the frequency of the transmitter, where P is the
maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption
and reflection from structures, objects, and people.
Introduction
About AMM215WTTP Series
The AMM215WTTP Touch screen LCD Monitor displays information from imaging systems and
devices.
Features include:
• Direct Analog signal input
• Direct Digital signal input
• Active matrix TFT LCD technology
• 1920 x 1080 resolution
• 21.5" viewable display area - 16:9 aspect ratio
• 31.47 ~ 82.3 KHz horizontal scan
• 56 ~ 75 Hz high refresh rate
• 0.24795mm x 0.24795mm pixel pitch
• Auto adjustment function
• Multilingual OSD user control
• 100 mm VESA mount
• Removable base for flexible mounting solutions.
• Touch screen with USB controller
• Audio output(optional)
• USB HUB 2.0(optional)
Touch Screen for AMM215WTTP
• Projected Capacitive touch screen for finger input only
• Surface: Glare treatment
• Interface: USB controller
• Transmittance: 90%±5%
• HID: Windows® 7
• Driver: VISTA, XP, 2000, CE, XP Embedded, Linux, Apple® Mac OS
10
Package Overview
LCD Display
Power Cord
USB Cable ( A to B)
DVI-D Cable
Quick Start Guide
Touch Driver CD
*Accessories might change depending on region.
11
VGA Signal Cable
DC Power Supply
Audio Cable
(optional)
Unpacking the Monitor
Before you unpack your monitor, prepare a suitable workspace. You need a stable and level
surface near a grounded wall outlet in an area which is relatively free of glare from sunlight
or other sources of bright light. The monitor is cooled by natural convection (it has no fan).
For optimum performance, do not block the cooling vents.
While unpacking the monitor, inspect it and other package contents for shipping damage that
could cause a fire or shock hazard. Immediately report any shipping damage to the carrier or
transportation company or contact customer service for returns.
After you unpack the monitor, make sure the following items are included:
‧Monitor with video cable
‧AC adapter with cable
CAUTION: AC Adapter must be plugged into grounded a power outlet
CAUTION : AC adapter
Manufacturer: BridgePower Corp.
Model No: BPM050S12F09
INPUT: 100-240Vac, 50-60 Hz, 1.5A
OUTPUT: 12Vdc, 4.2A
‧ This operations manual
Note: Your system provider may offer alternative cords or cables depending on
the installation requirement and local geography issues.
12
Installation
Product Overview
• Front View
• Bottom View (Without Stand)
USB B-Type
AUDIO
USB A-Type
VGA
DVI
DC IN
RJ11
13
Flat Panel Mounting Physical Mounting Interface by
VESA
This monitor conforms to the VESA Flat Panel Mounting Physical Mounting Interface
standard which defines a physical mounting interface for flat panel monitors, and
corresponding with the standards of flat panel monitor mounting devices, such as wall and
table arms. The VESA mounting interface is located on the back of your monitor.
To mount the monitor on a UL certified swing arm or other mounting fixture, follow the
instructions included with the mounting fixture to be used.
100.0 mm
Slots(X6)
100.0 mm
VESA
Mounting
Interface
Warning
Please select the proper screws!
The distance between the back cover surface and the bottom of the screw hole is 8
mm. Please use four M4 screws diameter with proper length to mount your monitor.
Please note: the mounting stand must be able to support at least 17.6 lbs (8Kg).
14
Start Your Installation
Please follow these instructions so that you can hook up the cables to associated connectors.
1. Lay the LCD flat on an even surface.
Step 2
2. Move the stand into position as seen in the step 1 diagram.
3. Connect the cables to the appropriate connectors as seen in the step 2 diagram.
Step 1
Step 2
USB
VGA
DC IN
DVI
15
Connecting the Display
To setup this display, please refer to the following figure and procedures.
1.
2.
3.
4.
5.
6.
Be sure all equipment is turned off.
Connect the DC plug to the power connector on the monitor and the other end into an
electrical outlet (8.1).
Connect the D-SUB or DVI cable from the display’s D-SUB or DVI input connector to the
D-SUB or DVI connector of your host computer and tighten the screws (8.1).
Connect the USB cable from the USB port of your display to the USB port (8.1) of your
computer.
Configure the touch screen. Refer to the “Touch Screen Driver Installation” section on
page 16.
Once the touch screen is configured, the monitor is ready for use.
Note:
Avoid placing the monitor against a bright background or where sunlight or other light
sources may reflect on the area of the monitor. Place the monitor just below eye level.
To ensure the LCD display works well with your computer, please configure the display mode
of your graphics card to make it less than or equal to 1920 x 1080 resolution and make sure
the timing of the display mode is compatible with the LCD display.
We have listed the compatible “Video Modes” of your LCD display in the appendix
(on page 24) for your reference.
External power supplies applicable: Bridgepower / BPM050S12F09
Recommendation to Use more than One Unit
As unforeseen situations can occasionally occur with the monitor, when the display is used
please use a safety control. It is strongly recommended the user uses more than one unit or
prepares a spare unit in case there is an emergency.
On Burn-in
Permanent burn-in may occur from the followings:
‧ Displaying color bar or static images repeatedly or for a long period of time.
‧ Using the unit repeatedly in a high temperature/ high humidity environment
‧ Displaying an image smaller than the monitor continuously.
16
Figure
17
User Controls
Back Panel Controls
Icon
Key Name
Menu
Up
Down
Select
Power
OSD
Key
Menu off status
Menu on status
Menu appear
Menu disappear / return to main item
Brightness
Main item select up / Adjust up
Mute
Main item select down / Adjust down
Select sub-item function
Power On / Off
18
How to Use the OSD Menus
Icon
Key Name
Menu
Up
Down
Select
Power
1. Press the “Menu” button to pop up the “on-screen menu” and press “Up” or “Down”
button to select among the five functions in the main menu.
2. Choose the adjustment items by pressing the “Select” button.
3. Adjust the value of the adjustment items by pressing the “Up” or “Down” button.
4. With the OSD menu on the screen, press the “Menu” button to return to the main menu
or to exit OSD.
5. The OSD menu will automatically close, if you have left it idle for a pre-set time.
6. To Lock the OSD / Power menu buttons, please follow the instructions below.
(Please note: the monitor has to be turned ON with a valid signal pre-set)
(a.) Press the “Menu” key; the OSD menu will open.
(b.) Press and hold the “Menu” key again with the OSD menu on the screen; the OSD
menu will disappear. Then press the “Power” key 1 time while the menu key is still
being pressed. The “Lock/Unlock” menu will appear for 3 seconds.
(c.) Use the “Select” key to select OSD or Power setting then set at “Lock” by pushing the
“UP” or “Down” button.
(d.) When the “UP” or “Down” button is released, the previous setting will be saved and
exit the “Lock/Unlock” menu automatically.
7. To Unlock the OSD / Power menu buttons, please follow the instructions below.
(Please note: the monitor has to be turned ON with a valid signal pre-set)
(a.) Press and hold the “Menu” key then press the “Power” key simultaneously; the
“Lock/Unlock” menu will appear for 3 seconds.
(b.) Use the “Select” key to select OSD or Power setting then set at “Unlock” by pushing
the “UP” or “Down” button.
(c.) When the “Up” or “Down” button is released, the previous setting will be saved, and
the “Lock/Unlock” menu will close automatically.
Please note:
a. When the OSD Lock function is selected, this indicates that all the buttons except
the “power” button are now disabled.
b. When the Power Lock function is selected, the “Power” key is disabled. The user
cannot turn off the monitor with the “Power” key.
19
On-Screen Display Menus
Main OSD Menu:
ITEM
CONTENT
Contrast
The monitor luminance level control.
Brightness
The monitor backlight level control.
Auto Adjust
Fine-tune the image to full screen automatically.
Left/Right
Moving screen image horizontal position to left or right.
Up/Down
Moving screen image vertical position to up or down.
Horizontal size
The screen image horizontal dot clock adjustment.
Fine
The screen image pixel phase adjustment.
OSD Left/Right
Moving OSD menu horizontal position to left or right.
OSD Up/Down
Moving OSD menu vertical position to up or down.
OSD Time out
OSD auto-disappear time selection.
OSD Language
OSD menu language selection. ( English, French, Japanese, Deutsch,
Spanish, Italian, Traditional Chinese and Simplified Chinese)
Factory Reset
Factory default value restored.
RGB
Color temperature selection. (9300K, 6500K, 5500K, 7500K, User)
Volume
Audio volume adjustment
Mute
Audio ON/OFF control
20
Appendix
Troubleshooting
If you are experiencing trouble with the LCD display, refer to the following. If the problem
persists, please contact your local dealer or our service center.
Problem: No image appears on screen.
► Check that all the I/O and power connectors are correctly and well connected
as described in the “Installation” section.
► Make sure the pins of the connectors are not crooked or broken.
Problem: Partial Image or incorrectly displayed image.
► Check to see if the resolution of your computer is higher than that of the LCD
display.
► Reconfigure the resolution of your computer to make it less than or equal to
1920 x 1080.
Problem: Image has vertical flickering line bars.
► Use “Horizontal size” to make an adjustment.
► Check and reconfigure the display mode of the vertical refresh rate of your
graphic card to make it compatible with the LCD display.
Problem: Image is unstable and flickering
► Use “Fine” to make an adjustment.
Problem: Image is scrolling
► Check and make sure the VGA signal cable (or adapter) is securely connected.
► Check and reconfigure the display mode of the vertical refresh rate of your
graphics card to make it compatible with the LCD display.
Problem: Vague image (characters and graphics)
► Use “Horizontal size” to make an adjustment. If this problem still exists, use “Fine”
to make an adjustment.
21
Warning Signal
If you see warning messages on your LCD screen, this means that the LCD display cannot
receive a clean signal from the computer graphics card.
Below are the three kinds of Warning Signal. Please check the cable connections or contact
your local dealer or our service center for more information.
No Signal
This message means that the LCD display has been powered on but it cannot receive any
signal from the computer graphics card. Check all the power switches, power cables, and
VGA/DVI signal cable.
Going to Sleep
The LCD display is under the power saving mode. In addition, the LCD display will enter
power saving mode when experiencing a sudden signal disconnecting problem.
The monitor can be activated by pressing any keyboard, triggering the mouse or touching
the screen.
Out of Range
This message means that the signal of the computer graphic card is not compatible with the
LCD display. When the signal is not included in the “Video Modes” list we have listed in the
Appendix of this manual, the LCD monitor will display this message.
22
Product Dimensions
313.3mm
517.4mm
212.0mm
► Side View
46.0mm
249.6mm
219.0mm
► Top View
23
351.7mm
► Front View
Compatibility Modes
Mode
Resolution
H-Frequency(khz)
V-Frequency(hz)
IBM VGA
720X400
31.47
70
IBM VGA
640X480
31.47
60
Apple MacII
640X480
35.00
66
VESA VGA
640X480
37.86
72
VESA VGA
640X480
37.50
75
VESA SVGA
800X600
35.16
56
VESA SVGA
800X600
37.88
60
VESA SVGA
800X600
48.08
72
VESA SVGA
800X600
46.88
75
Apple Mac
832X624
49.72
75
VESA XGA
1024X768
48.36
60
VESA XGA
1024X768
56.48
70
VESA XGA
1024X768
60.02
75
VESA SXGA
1280X1024
64.00
60
VESA SXGA
1280X1024
80.00
75
VESA SXGA
1152X864
67.50
75
VESA SXGA
1280X960
60.00
60
WXGA+
1440X900
56.00
60
WXGA+
1440X900
70.60
75
WSXGA+
1680X1050
65.20
60
WSXGA+
1680X1050 (VGA only)
82.30
75
VESA WXGA
1280X768
47.776
60
WSXGA+
1920X1080
67.50
60
24
Touch Screen Driver Installation
The AMM215WTTP is available with USB connections. The touch driver is located on the
enclosed CD-ROM for these operating systems: VISTA, XP, 2000, CE, XP Embedded,
Linux, Apple® Mac OS.
Please Note:
1. The AMM215WTTP is Microsoft® Windows® HID (Human Interface Device) compatible
if you use the USB touch screen interface. No additional software driver is required for
general operation of the touch screen.
2. For AMM215WTTP, the system requires 15 seconds for Windows 7 to install/uninstall the
touch drivers while turning power on/off or plugging/unplugging USB cable.
AMM215WTTP Driver Install Instructions:
If you are using a PC running VISTA, XP, 2000, follow the instructions
below:
1.
2.
3.
4.
Power on the PC.
Be sure the USB cable is connected from the PC to the LCD display.
Open the CD-ROM.
Follow the step-by-step instructions as shown on the pop-up windows.
If you are using a PC running Windows® XP Embedded, follow the
instructions below:
Express:
1. Power on the computer.
2. Make sure that the USB cable is connected to the computer.
3. Be sure that your EWF is disabled. If your EWF is enabled, please disable the EWF
by using the EWF Manager command.
4. Once the EWF is disabled click on the XP driver on the CD-ROM and follow the
step-by-step instructions as shown on the pop-up windows.
Custom:
1. Power on the computer.
2. Make sure that the USB cable is connected to the computer.
3. Follow the step-by-step instructions found in the folder file on the CD-ROM.
25
If you are using a PC running Windows® CE, follow the instructions
below:
1. Power on the computer.
2. Make sure that the USB cable is connected to the computer.
3. Using Platform Builder, build an image file by following the step-by-step instructions
found in the folder file on the CD-ROM.
If you are using a PC running Linux or Apple® Mac OS, follow the
instructions below:
1. Power on the computer.
2. Make sure that the USB cable is connected to the computer.
3. Follow the step-by-step instructions found in the folder file on the CD-ROM.
26
Description of Warranty
ADVAN warrants to the first Buyer (Buyer) that the product purchased when shipped in its
original container will conform to ADVAN specifications, and to any ADVAN approved
specifications furnished to ADVAN by the Buyer, and will be free of defects in materials and
workmanship. ADVAN warrants that the product purchased is manufactured from new components which meet ADVAN’s standards, quality and specifications.
Subject to the conditions and limitations set forth below, ADVAN will, at its option, either
repair any component of its products that prove defective by reason of improper
workmanship or materials or ADVAN has the exclusive right to replace with refurbished units
or with an equivalent product. ADVAN warrants that the components used for repair,
refurbished units or equivalent product will meet ADVAN standards, quality and
specifications.
Commencement and Duration of Warranty
The product purchased will be warranted for a period of eighteen (18) months (excluding the
LCD panel, touch screen, and the protection filter) from the date of shipment.
LCD panels and touch screens are warranted for a period of twelve (12) months from the
date of shipment.
Protection filters are not warranted as damage to the protection filter is considered to be
normal wear and tear and can be replaced at the Buyer’s cost.
Components used for repair, refurbished units or equivalent product will be warranted for a
period of twelve (12) months from the date of repair.
Limitation of Warranty
This limited warranty does not cover any damage to this product or other non-ADVAN
products that results from any of the following: improper installation or operation; accident;
abuse; misuse; natural disaster; war; insufficient or excessive electrical supply; abnormal
mechanical or environmental conditions; any unauthorized disassembly, repair or
modification; normal wear and tear; tampering by anyone other than an ADVAN engineer or
an ADVAN Authorized Service Center (ASC); the use of supplies, consumable items and
conditions beyond the control of ADVAN, such as common carrier provided equipment and/
or facilities; operation of ADVAN product in excess of the specifications. This limited warranty
also does not apply to any product that has not been handled or packaged correctly, that has
been sold as second-hand or has been resold contrary to the US export regulations,
on which the original identification information (i.e. serial number, rating and/or
warranty label) has been altered, obliterated or removed.
27
Return Material Authorization (RMA) Procedure
All claims must be submitted through the ADVAN website, whether in warranty or out, first
Buyer, distributor or OEM. End Users who have purchased through a distributor or OEM,
please contact the distributor or OEM.
http://www.advancorprma.com
Follow the instructions to receive an RMA number, shipping instructions and a shipping label
to be placed on the outside of the shipping container. A serial number and a detailed reason
for return are required.
In-transit damage is not covered by warranty. ADVAN will only pay for the return
shipment by surface transportation.
Returns without an RMA number will not be accepted.
For product support, please e-mail details of your inquiry including product model:
service@advancorp.com
In Warranty
ADVAN or its ASC will repair or replace if defective in material or workmanship without cost,
for a period of eighteen (18) months, (LCD panels and touch screens for a period of twelve (12)
months) after the date of shipment.
Buyer must notify ADVAN or its ASC of the defect before expiration of the warranty period,
and request a RMA number. If the configuration has been modified in any manner, the
product must be returned to its original configuration before any warranty service will be
performed by ADVAN or its ASC. No goods are to be returned to ADVAN or its ASC without
prior authorization. Buyer will be responsible for packaging (preferably original container)
and shipping the defective goods to ADVAN or its ASC, shipping charges prepaid.
ADVAN or its ASC will return the in warranty product, at no cost to the buyer.
Out-of-Warranty
ADVAN or its ASC will repair or replace if defective in material or workmanship with
fee, any product which the warranty period has expired (out-of-warranty).
Buyer must notify ADVAN or its ASC of the defect and request a RMA number. If the
configuration has been modified in any manner, the product must be returned to its original
configuration before any service will be performed by ADVAN or its ASC.
No goods are to be returned to ADVAN or its ASC without prior authorization. Buyer will be
responsible for packaging (preferably original container) and shipping the defective goods to
ADVAN or its ASC, shipping charges prepaid.
ADVAN or its ASC will return the out-of-warranty product, at cost to the buyer.
28
Product End of Life (EOL)
In the event of a RMA of an EOL product(s), ADVAN will hold or store major components of
its products for a period of five (5) years, after the EOL of its products. ADVAN shall continue
to perform the service of its products as long as ADVAN holds or stores said components of
the products, with reasonable charge.
The forgoing Warranty and Out-of-Warranty terms apply.
29
ADVAN Korea
#605, Kolon Science Valley 2-cha, 55, Digital-ro, 34-gil, Guro-gu, Seoul, 152-728
Korea
Tel : +82 2 783 5197
Fax : +82 2 868 0880
Web Page : http://www.advancorp.com
ADVAN INT’L CORP
47817 Fremont Blvd. Fremont, CA 94538, USA
Tel : 1 510 490 1005
Fax : 1 510 490 1151
Web Page : http://www.advancorp.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Instance ID                     : uuid:a51fc3d2-eb98-4394-b623-7e4cc3b1cf3f
Original Document ID            : adobe:docid:indd:84b5db97-ca05-11e0-8158-943eeb439bdc
Document ID                     : xmp.id:81E8DB4C2AFDE411AD69CBEC89047B2D
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:80E8DB4C2AFDE411AD69CBEC89047B2D
Derived From Document ID        : xmp.did:80E8DB4C2AFDE411AD69CBEC89047B2D
Derived From Original Document ID: adobe:docid:indd:84b5db97-ca05-11e0-8158-943eeb439bdc
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2015:05:18 14:53:05+08:00
Create Date                     : 2015:05:18 14:53:05+08:00
Modify Date                     : 2015:05:18 14:53:17+08:00
Metadata Date                   : 2015:05:18 14:53:17+08:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 33
Creator                         : Adobe InDesign CS6 (Windows)

EXIF Metadata provided by EXIF.tools