BBPOS WISEPAD WisePad User Manual WISEPAD Userguide V1 0 Eng

Download:
Mirror Download [FCC.gov]
Document ID	2240478
Application ID	1LgsLDFzstkjk1nt+CWj9Q==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	76.36kB (954465 bits)
Date Submitted	2014-04-12 00:00:00
Date Available	2014-04-12 00:00:00
Creation Date	2014-04-09 20:46:51
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2014-04-09 20:46:51
Document Title	Microsoft Word - WISEPAD_Userguide_V1.0_Eng
Document Creator	PScript5.dll Version 5.2
Document Author:	christy

Page
Revision
Date
Wisepad User Guide
1 of 12
1.0
17Mar2014
Page
Revision
Date
Switch on Wisepad. Standby can be seen on LCD. Then press the Bluetooth button on
red circle on figure shown, blue light is flashing. That means the Bluetooth module is
ready to be paired.
2 of 12
1.0
17Mar2014
Page
Revision
Date
3 of 12
1.0
17Mar2014
Page
Revision
Date
2. Open the App for using wisepad, and press the selection key on the bottom, there
are 4 options could be seen.
Upper left corner: Scan Bluetooth
Upper right corner: Paired Device
Lower left corner: Stop Bluetooth
Lower right corner: Unpair All
Press Scan Bluetooth to connect Wisepad
4 of 12
1.0
17Mar2014
Page
Revision
Date
After connected Bluetooth, Bluetooth connected and MAC Address will be
displayed on the APP, and Wisepad Ready will be shown on LCD. Blue light LED
will keep on.
5 of 12
1.0
17Mar2014
Page
Revision
Date
Upper left corner Get Device info
Middle left: Check Card
Lower left corner: Set Amount
Upper right corner: Clear Log
Middle right: Cancel Check Card
Lower right corner: Start EMV
1. Wisepad info and status could be get after press Get Device info. The display log
can be cleared by pressing Clear log.
6 of 12
1.0
17Mar2014
Page
Revision
Date
2. User can perform swipe card or insert ICC card after press Check Card button
7 of 12
1.0
17Mar2014
Page
Revision
Date
2.1 The following example is after a successful swipe card
8 of 12
1.0
17Mar2014
Page
Revision
Date
2.2 Further details could be checked with sliding middle log.
9 of 12
1.0
17Mar2014
Page
Revision
Date
2.3 ICC Card Inserted will be shown after inserted an ICC card successfully
10 of 12
1.0
17Mar2014
Page
Revision
Date
11 of 12
1.0
17Mar2014
3. User could perform a simulated EMV transaction after press Start EMV..
4. Press Disconnect Bluetooth to disconnect the device, and Bluetooth disconnected
will be shown. Wisepad will reset to Standby.
Page
Revision
Date
12 of 12
1.0
17Mar2014
FCC Requirement
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy, and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that changes or modifications not expressly approved by
the party responsible for compliance could void your authority to operate the
equipment.
M/N: WisePad
FCC ID: 2AB7XWISEPAD
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2014:04:09 20:46:51+08:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2014:04:09 20:46:51+08:00
Format                          : application/pdf
Title                           : Microsoft Word - WISEPAD_Userguide_V1.0_Eng
Creator                         : christy
Document ID                     : uuid:5eaa81c4-5c84-4f02-95fc-6c0ac859b50a
Instance ID                     : uuid:d13a5486-34eb-452c-b617-946e03244e54
Page Count                      : 12
Author                          : christy

EXIF Metadata provided by EXIF.tools