BEWELL CONNECT BW-SCB1 MyBabyScale User Manual

BEWELL CONNECT CORP MyBabyScale

User Manual

BewellConnect - BW-SCB1 - User Manual - 072016 BewellConnect - BW-SCB1 - User Manual - 07201618 19Accessoires fournisUn pèse-personne connecté, une notice, un guide d’installation rapide, 2 piles LR6-AA8. GUIDE DE DÉPANNAGESi l’un des problèmes suivants survient lors de l’utilisation de votre MyBabyScale®, reportez-vous à ce guide de dépannage. Si le pro-blème persiste, veuillez contacter notre support Clients.ERREUR À L’ÉCRANCAUSES POSSIBLES SOLUTION“LO” s’ache Piles usagées Insérer des piles neuves.“O-LD” s’acheAvertissement de surchargeLe poids maximal supporté par la balance est de 50kg. Retirez immédia-tement le poids de la balance, des dommages irréver-sibles pourraient être causés à l’appareil.BW-SCB1ENMyBabyScale
BewellConnect - BW-SCB1 - User Manual - 072016 BewellConnect - BW-SCB1 - User Manual - 07201620 21THIS PRODUCT CONFORMS TO REACH STANDARD ROHSCONTENTS1. WARNINGS 212. INFORMATIONS 2222. CHILD’S GROWTH CURVE 2323. ABOUT BMI  BODY MASS INDEX 2424. CALCULATING BMI IN CHILDREN 243. USING THE DEVICE 2531. PRECAUTIONS BEFORE USE 2532. USING THE BABY SCALE 2533. CHANGING THE BATTERIES 274. USING THE APP 2841. DATA TRANSFER 2842. APP FEATURES 295. CLEANING AND MAINTENANCE 296. AVOIDING MALFUNCTIONS 307. TECHNICAL SPECIFICATIONS 308. TROUBLESHOOTING GUIDE 31Find out how to install and use the BewellConnect® app by log-ging on to our website www.bewell-connect.com/installThe manufacturer reserves the right to change the technical specications of the product without prior notice.Dear customer, You have just bought MyBabyScale®, the connected baby scale by BewellConnect®, and we thank you for your custom. We hope that you enjoy using it and recommend reading this user guide care-fully.1. WARNINGS- Use this device only for its intended purpose, as described in this guide.- This device can be used for personal use at home.- Use this device in an ambient temperature range between 10 and 40°C.- Do not expose this device to extreme temperature conditions > 60°C or < -20°C.- Do not use this device in relative humidity higher than 85%.- This device must be placed on a stable surface when using the tray. - Never leave your baby unsupervised, even for a moment, in par-ticular when the baby is placed on the tray. - This device should always be placed in a clean, dry place.- Do not expose this device to sunlight or water.- Do not expose this device to electrical shocks.- Never drop the device.- Follow the maintenance instructions stipulated in this guide.- Do not attempt to open the device. In the event of a problem, contact your retailer.- Do not leave this device within children’s reach.- The measurement results are given for information only. If there is any doubt regarding your results, please contact your paedia-trician.- Discontinue using the device in the event of anomalies or mal-
BewellConnect - BW-SCB1 - User Manual - 072016 BewellConnect - BW-SCB1 - User Manual - 07201622 23functions.- In general, portable and mobile RF communication equipment does not aect the functioning of medical electronic equipment. However, it cannot be used in environments with high electro-magnetic interference: near a television, microwave oven, etc.- Do not use any batteries other than those listed, do not recharge non rechargeable batteries, do not throw them into re.- Remove the batteries if the device is not in use for a long period.- This device is not designed to be used by people (including chil-dren) with reduced physical, sensory or mental abilities, or people without experience or knowledge, unless they are able to benet from it through the intermediary of a person responsible for their safety, under supervision or following prior instructions on how to use this device.IMPORTANT: PLEASE OBSERVE THE POLARITY OF THE BATTERIES. A POLARITY ERROR MAY CAUSE DAMAGE TO THE DEVICE AND COMPROMISE THE WARRANTY.2. INFORMATIONSDuring their stay in the maternity ward, baby is weighed every day to monitor weight loss and gradual return to birth weight. When they arrive home, it is advisable to weigh them 1 to 3 times a week, always under the same conditions. Monitoring weight is one of the main indicators of good health. Delayed or excessively fast growth is sometimes a sign of a disease or disorder. Regular monitoring makes it possible to see changes in weight, particularly when your baby is struggling to feed. Most infant scales only cover a limited period of time. That is why BewellConnect® had developed MyBabyScale®, the smart, scalable, connected wireless baby scale that lets you keep track of your child’s weight from birth all the way to adolescence.21. BABY’S WEIGHTA baby grows the most in its rst year, gaining around 6 kg in the rst 12 months then just 3 kg the following year. It is important to avoid excess weight gain by only feeding your baby what he or she needs. However, bear in mind that a baby grows in stages, with pauses, and that there are great height and weight variations between individual children.22. CHILD’S GROWTH CURVERegularly monitoring your child’s growth makes it possible to create curves (Height and weight, CF 4. APP). It is very important to attentively monitor baby’s weight gain. A baby loses weight in the three or four days following birth. This is a normal phenome-non. As soon as baby has returned to its birth weight, growth will continue evenlyUsing the MyBabyScale® app, you can create curves tracking your child’s weight and height (according to WHO standards) and show them to your doctor regularly.
BewellConnect - BW-SCB1 - User Manual - 072016 BewellConnect - BW-SCB1 - User Manual - 07201624 25The table opposite shows the recommended weights for a healthy baby.AGE WEIGHT GAIN0 to 3 months 25 to 30g/day3 to 6 months 20 to 25g/day6 to 9 months 15 to 25g/day9 to 12 months 10 to 15g/dayWarning Do not put your child on a diet without consulting a doctor rst. Analysis and interpretation of BMI data must be performed by a healthcare professional (general practitioner, paediatrician, school doctor). 23. ABOUT BMI  BODY MASS INDEXA study by American researchers from Harvard University found that if BMI increases during the rst 6 months, the child is more likely to suer from premature obesity at 3 years. BMI is an indica-tor of corpulence and potential medical risks, based on the ratio of weight to height. The corpulence curve helps to identify children who are obese or at risk of becoming so: the child is obese if their BMI is above the 97th percentile. BMI increases in the rst year and then decreases until the age of 6 before increasing again. This rise, which occurs on average at 6 years, is called adiposity rebound. The earlier the adiposity rebound takes place, the greater the risk of obesity. An upward percentile crossing is a warning sign.24. CALCULATING BMI IN CHILDRENThe child’s BMI is calculated using the following formula: BMI = weight (in kilograms) / (height (in metres) x height (in metres)). For example, for a 9-year-old girl weighing 19 kg and measuring 1.10 metres, the BMI will be: BMI = 19 / (1.1 x 1.1) or 19 / 1.21 = 15.70. As you can see, the resulting BMI for the child in question (15.70) is entirely in line with the average growth chart for girls. 3. USING THE DEVICE31. PRECAUTIONS BEFORE USE- The child should not be left unsupervised when using the device. - Place the baby scale on a solid, at, skid-proof surface (avoid pla-cing it on a carpet, for example).- Weight varies throughout the day, so we recommend weighing before meals to obtain comparable results. It is advisable to take the weight measurement at the same time every day, preferably on an empty stomach.32. USING THE BABY SCALElbHOLD OZ kg134521 Display 2 Bluetooth 3 Unit of mass 4 Battery charge status 5 HoldOverload warning: Immediately remove the child placed on the
BewellConnect - BW-SCB1 - User Manual - 072016 BewellConnect - BW-SCB1 - User Manual - 07201626 27scale if “O-Ld” appears on the screen. Irreversible damage could be caused to the device.DESCRIPTIONView diagram page 2a Baseb Disc for weighing a child/teenager c Baby trayFirst useRemove the cover from the battery compartment underneath the device. Insert 2 1.5V LR06-AA type batteries. Turn on the baby scale using the “on/o” button.Choosing the unit of weight After pressing the on/o button to turn on MyBabyScale®, press the “on/o” button again to choose the unit of weight in “lb & oz” or “kg” before the gure “0.00” appears on the screen.Attaching the tray (FIG. 1) or disc (FIG. 2) to the baseTurn the base upside down. Unlock the locking mechanism (FIG. 3) by turning it to open. Insert the tray or the disc into the base using the notches. Turn the locking mechanism (FIG. 3) to close while hol-ding the scale or disc in place. Make sure that the tray is securely locked before weighing the child.OPEN CLOSE123Starting up- Place the baby scale on a at, solid surface, making sure that it is stable and that nothing touches it. Press the «on/o» button.- On rst use, the gures ash during weighing. The baby‘s weight is displayed on the screen at the same time as the word „hold“. The scale will turn o automatically. On subsequent uses, the previous weight recorded is displayed at startup. - To perform another weighing, remove the baby from the scale. Press the „hold“ button until the „0.00 kg“ gure appears on the screen.- If you wish to place a towel under the baby before weighing it, put it on the scale before turning it on. Press the “on/o” button and place the baby on the tray when “0.00” appears on the screen. The scale automatically performs the calculation and only displays the baby’s weight (at the same time as the word “hold”).- After weighing, remove the baby at the same time as the towel. A negative value will appear, press “tare” to reset the scale to zero for future weight measurements. - When the child is able to stand, replace the baby weighing tray with the disc.Do not use the disc to weigh a child that cannot yet stand.Shutdown- The device shuts down automatically after displaying the weight (approximately one minute). - The device can be shut down manually by pressing the “on/o” but-ton.33. CHANGING THE BATTERIES- The battery compartment is located at the back of the device. - When using it for the rst time, insert 2 new 1.5V LR6-AA batteries
BewellConnect - BW-SCB1 - User Manual - 072016 BewellConnect - BW-SCB1 - User Manual - 07201628 29into the scale.- When the LCD screen displays “LO”, the batteries are low or used up. Replace used batteries, taking care to observe the polarity. A polarity error may cause damage to the device and compromise the warranty.- Never insert rechargeable batteries. Use single-use batteries only. Do not mix new batteries with used batteries. - Do not throw your used batteries out with household waste.- Take your used batteries to a collection point.Remove the batteries if the device is not in use for a long period, in order to avoid any leaks that may damage the unit.4. USING THE APP41. DATA TRANSFERDownload the BewellConnect® appbwMyBabyScaleDownload the BewellConnect® app from your smartphone or tablet store. (App Store for an iOS device, Play Store for an Android device)First use – Programming personal data - Start by creating proles for yourself and your children- Programme the proles by entering age, height and sexTaking the measurement- To track your child’s growth, connect your device (telephone, tab-let) using Bluetooth (Bluetooth 4.0 smart Low Energy connectivi-ty, compatible with iPhone 4s and up).- Turn on the scale by pressing the on/o button.- Open the BewellConnect® app and choose your child’s prole.- Start MyBabyScale® and go to the measurement screen before weighing your child, to save the data.- Place the child on the baby scale.- Data are measured and transferred to the smartphone or tablet automatically with MyBabyScale®.- You can consult the growth curves in the app.42. APP FEATURESMyBabyScale® lets you track your baby’s growth (weight and height). However, other features are also available: - Growth: Size, head circumference, arm circumference and waist circumference.- Breastfeeding: breastfeeding duration on the right breast, breast-feeding duration on the left breast.- Bottles: quantity of bottles, expressed milk or powdered milk.- Sleep: duration.- Nappy: consistency and amount of stools/urine.- Mood: it is possible to add your baby’s mood whenever you enter a new measurement. There is also the option to indicate whether there has been any regurgitation. The app helps you to achieve successful dietary diversication, pro-viding advice on introducing foods into your baby’s diet from 0 to 3 years of age.5. CLEANING AND MAINTENANCE- Do not allow the weighing tray to become wet as this could make it slippery and cause an accident. - Store your baby scale horizontally.- Store your baby scale in a dry place and away from moisture.- Use a soft, dry cloth to clean the unit. If necessary, use a cloth moistened slightly with tap water. - Do not use alcohol, benzene, thinner or other chemicals to clean the device.- This product is not waterproof, avoid contact with liquid.
BewellConnect - BW-SCB1 - User Manual - 072016 BewellConnect - BW-SCB1 - User Manual - 07201630 31- If the unit has been exposed to temperatures below 0°C, be sure to leave it for 30 minutes at room temperature before use. Without this waiting period, the results could be wrong.- If the baby scale is not in use for a long period of time, be sure to remove the batteries (they could damage the device). - Do not use rechargeable batteries.6. AVOIDING MALFUNCTIONS- Do not drop the device, avoid jolts and shocks.- Do not insert anything into the device, excluding batteries.- Do not disassemble the baby scale.- Do not put the device in water.- 7. TECHNICAL SPECIFICATIONSProduct name BewellConnect® MyBabyScale®Reference BW-SCB1Units of weight Ib:oz /kgItem Units Minimum MaximumWeighing measure -ment rangekg 0.04 50Ib oz 1.5 99Ib 15.5ozDivision kg 0.01oz 0,5Overload indicator “O-Ld”Dimensions 420 x 340 x 100 mmWeight 1.82kgNormal conditions of useTemperature: 5 - 35°C Humidity: 20 - 80%Storage conditions Temperature: -10 - 50°C Humidity: 20-80% Bluetooth technology 4.0 smart Low EnergyPower supply 2 LR6-AA batteries (supplied)Low battery indicator “LO”Battery life 3-4 months (for 4 daily measure-ments) Low battery indicatorAutomatic shutdown 1 minuteAccessories suppliedOne connected scale, one user guide, one quick setup guide,2 LR6-AA batteries8. TROUBLESHOOTING GUIDEIf any of the following problems occur when using your MyBabyScale®, please refer to this troubleshooting guide. If the problem persists, please contact our customer support service.
BewellConnect - BW-SCB1 - User Manual - 072016 BewellConnect - BW-SCB1 - User Manual - 07201632 33SCREEN ERRORPOSSIBLE CAUSE(S) SOLUTION“LO” appears Batteries used up Insert new batteries“O-LD” appears Overload warningThe maximum weight supported by the scale is 50kg. Immediately remove the weight from the scale, or irreversible damage may be caused to the device.BW-SCB1ESMyBabyScale

Navigation menu