BEWELL CONNECT BW-SCB1 MyBabyScale User Manual
BEWELL CONNECT CORP MyBabyScale
User Manual
BewellConnect - BW-SCB1 - User Manual - 072016 BewellConnect - BW-SCB1 - User Manual - 072016
18 19
Accessoires fournis
Un pèse-personne connecté, une
notice, un guide d’installation
rapide, 2 piles LR6-AA
8. GUIDE DE DÉPANNAGE
Si l’un des problèmes suivants survient lors de l’utilisation de votre
MyBabyScale®, reportez-vous à ce guide de dépannage. Si le pro-
blème persiste, veuillez contacter notre support Clients.
ERREUR À
L’ÉCRAN
CAUSES
POSSIBLES SOLUTION
“LO”
s’ache Piles usagées Insérer des piles
neuves.
“O-LD”
s’ache
Avertissement de
surcharge
Le poids maximal
supporté par la
balance est de 50kg.
Retirez immédia-
tement le poids
de la balance, des
dommages irréver-
sibles pourraient être
causés à l’appareil.
BW-SCB1
EN
MyBabyScale
BewellConnect - BW-SCB1 - User Manual - 072016 BewellConnect - BW-SCB1 - User Manual - 072016
20 21
THIS PRODUCT CONFORMS TO REACH STANDARD ROHS
CONTENTS
1. WARNINGS 21
2. INFORMATIONS 22
22. CHILD’S GROWTH CURVE 23
23. ABOUT BMI BODY MASS INDEX 24
24. CALCULATING BMI IN CHILDREN 24
3. USING THE DEVICE 25
31. PRECAUTIONS BEFORE USE 25
32. USING THE BABY SCALE 25
33. CHANGING THE BATTERIES 27
4. USING THE APP 28
41. DATA TRANSFER 28
42. APP FEATURES 29
5. CLEANING AND MAINTENANCE 29
6. AVOIDING MALFUNCTIONS 30
7. TECHNICAL SPECIFICATIONS 30
8. TROUBLESHOOTING GUIDE 31
Find out how to install and use the BewellConnect® app by log-
ging on to our website www.bewell-connect.com/install
The manufacturer reserves the right to change the technical
specications of the product without prior notice.
Dear customer,
You have just bought MyBabyScale®, the connected baby scale by
BewellConnect®, and we thank you for your custom. We hope that
you enjoy using it and recommend reading this user guide care-
fully.
1. WARNINGS
- Use this device only for its intended purpose, as described in this
guide.
- This device can be used for personal use at home.
- Use this device in an ambient temperature range between 10 and
40°C.
- Do not expose this device to extreme temperature conditions
> 60°C or < -20°C.
- Do not use this device in relative humidity higher than 85%.
- This device must be placed on a stable surface when using the
tray.
- Never leave your baby unsupervised, even for a moment, in par-
ticular when the baby is placed on the tray.
- This device should always be placed in a clean, dry place.
- Do not expose this device to sunlight or water.
- Do not expose this device to electrical shocks.
- Never drop the device.
- Follow the maintenance instructions stipulated in this guide.
- Do not attempt to open the device. In the event of a problem,
contact your retailer.
- Do not leave this device within children’s reach.
- The measurement results are given for information only. If there
is any doubt regarding your results, please contact your paedia-
trician.
- Discontinue using the device in the event of anomalies or mal-
BewellConnect - BW-SCB1 - User Manual - 072016 BewellConnect - BW-SCB1 - User Manual - 072016
22 23
functions.
- In general, portable and mobile RF communication equipment
does not aect the functioning of medical electronic equipment.
However, it cannot be used in environments with high electro-
magnetic interference: near a television, microwave oven, etc.
- Do not use any batteries other than those listed, do not recharge
non rechargeable batteries, do not throw them into re.
- Remove the batteries if the device is not in use for a long period.
- This device is not designed to be used by people (including chil-
dren) with reduced physical, sensory or mental abilities, or people
without experience or knowledge, unless they are able to benet
from it through the intermediary of a person responsible for their
safety, under supervision or following prior instructions on how
to use this device.
IMPORTANT: PLEASE OBSERVE THE POLARITY OF THE BATTERIES.
A POLARITY ERROR MAY CAUSE DAMAGE TO THE DEVICE
AND COMPROMISE THE WARRANTY.
2. INFORMATIONS
During their stay in the maternity ward, baby is weighed every day
to monitor weight loss and gradual return to birth weight. When
they arrive home, it is advisable to weigh them 1 to 3 times a week,
always under the same conditions. Monitoring weight is one of the
main indicators of good health. Delayed or excessively fast growth is
sometimes a sign of a disease or disorder. Regular monitoring makes
it possible to see changes in weight, particularly when your baby is
struggling to feed. Most infant scales only cover a limited period of
time. That is why BewellConnect® had developed MyBabyScale®, the
smart, scalable, connected wireless baby scale that lets you keep
track of your child’s weight from birth all the way to adolescence.
21. BABY’S WEIGHT
A baby grows the most in its rst year, gaining around 6 kg in the
rst 12 months then just 3 kg the following year. It is important
to avoid excess weight gain by only feeding your baby what he
or she needs. However, bear in mind that a baby grows in stages,
with pauses, and that there are great height and weight variations
between individual children.
22. CHILD’S GROWTH CURVE
Regularly monitoring your child’s growth makes it possible to
create curves (Height and weight, CF 4. APP). It is very important
to attentively monitor baby’s weight gain. A baby loses weight in
the three or four days following birth. This is a normal phenome-
non. As soon as baby has returned to its birth weight, growth will
continue evenly
Using the MyBabyScale® app, you can create
curves tracking your child’s weight and
height (according to WHO standards) and
show them to your doctor regularly.
BewellConnect - BW-SCB1 - User Manual - 072016 BewellConnect - BW-SCB1 - User Manual - 072016
24 25
The table opposite shows the recommended weights for a healthy
baby.
AGE WEIGHT GAIN
0 to 3 months 25 to 30g/day
3 to 6 months 20 to 25g/day
6 to 9 months 15 to 25g/day
9 to 12 months 10 to 15g/day
Warning
Do not put your child on a diet without consulting a doctor rst.
Analysis and interpretation of BMI data must be performed by a
healthcare professional (general practitioner, paediatrician, school
doctor).
23. ABOUT BMI BODY MASS INDEX
A study by American researchers from Harvard University found
that if BMI increases during the rst 6 months, the child is more
likely to suer from premature obesity at 3 years. BMI is an indica-
tor of corpulence and potential medical risks, based on the ratio of
weight to height. The corpulence curve helps to identify children
who are obese or at risk of becoming so: the child is obese if their
BMI is above the 97th percentile. BMI increases in the rst year and
then decreases until the age of 6 before increasing again. This rise,
which occurs on average at 6 years, is called adiposity rebound.
The earlier the adiposity rebound takes place, the greater the risk
of obesity. An upward percentile crossing is a warning sign.
24. CALCULATING BMI IN CHILDREN
The child’s BMI is calculated using the following formula: BMI =
weight (in kilograms) / (height (in metres) x height (in metres)). For
example, for a 9-year-old girl weighing 19 kg and measuring 1.10
metres, the BMI will be: BMI = 19 / (1.1 x 1.1) or 19 / 1.21 = 15.70.
As you can see, the resulting BMI for the child in question (15.70) is
entirely in line with the average growth chart for girls.
3. USING THE DEVICE
31. PRECAUTIONS BEFORE USE
- The child should not be left unsupervised when using the device.
- Place the baby scale on a solid, at, skid-proof surface (avoid pla-
cing it on a carpet, for example).
- Weight varies throughout the day, so we recommend weighing
before meals to obtain comparable results. It is advisable to take
the weight measurement at the same time every day, preferably
on an empty stomach.
32. USING THE BABY SCALE
lbHOLD OZ kg
13
4
52
1
Display
2
Bluetooth
3
Unit of mass
4
Battery charge status
5
Hold
Overload warning: Immediately remove the child placed on the
BewellConnect - BW-SCB1 - User Manual - 072016 BewellConnect - BW-SCB1 - User Manual - 072016
26 27
scale if “O-Ld” appears on the screen. Irreversible damage could be
caused to the device.
DESCRIPTION
View diagram page 2
a
Base
b
Disc for weighing a child/teenager
c
Baby tray
First use
Remove the cover from the battery compartment underneath the
device. Insert 2 1.5V LR06-AA type batteries. Turn on the baby scale
using the “on/o” button.
Choosing the unit of weight
After pressing the on/o button to turn on MyBabyScale®, press
the “on/o” button again to choose the unit of weight in “lb & oz” or
“kg” before the gure “0.00” appears on the screen.
Attaching the tray (FIG. 1) or disc (FIG. 2) to the base
Turn the base upside down. Unlock the locking mechanism (FIG. 3)
by turning it to open. Insert the tray or the disc into the base using
the notches. Turn the locking mechanism (FIG. 3) to close while hol-
ding the scale or disc in place. Make sure that the tray is securely
locked before weighing the child.
O
P
E
N
C
L
O
S
E
12
3
Starting up
- Place the baby scale on a at, solid surface, making sure that it
is stable and that nothing touches it. Press the «on/o» button.
- On rst use, the gures ash during weighing. The baby‘s weight
is displayed on the screen at the same time as the word „hold“. The
scale will turn o automatically. On subsequent uses, the previous
weight recorded is displayed at startup.
- To perform another weighing, remove the baby from the scale.
Press the „hold“ button until the „0.00 kg“ gure appears on the
screen.
- If you wish to place a towel under the baby before weighing it, put
it on the scale before turning it on. Press the “on/o” button and
place the baby on the tray when “0.00” appears on the screen. The
scale automatically performs the calculation and only displays the
baby’s weight (at the same time as the word “hold”).
- After weighing, remove the baby at the same time as the towel. A
negative value will appear, press “tare” to reset the scale to zero for
future weight measurements.
- When the child is able to stand, replace the baby weighing tray
with the disc.
Do not use the disc to weigh a child that cannot yet stand.
Shutdown
-
The device shuts down automatically after displaying the weight
(approximately one minute).
-
The device can be shut down manually by pressing the “on/o” but-
ton.
33. CHANGING THE BATTERIES
- The battery compartment is located at the back of the device.
- When using it for the rst time, insert 2 new 1.5V LR6-AA batteries
BewellConnect - BW-SCB1 - User Manual - 072016 BewellConnect - BW-SCB1 - User Manual - 072016
28 29
into the scale.
- When the LCD screen displays “LO”, the batteries are low or used
up. Replace used batteries, taking care to observe the polarity. A
polarity error may cause damage to the device and compromise
the warranty.
- Never insert rechargeable batteries. Use single-use batteries only.
Do not mix new batteries with used batteries.
- Do not throw your used batteries out with household waste.
- Take your used batteries to a collection point.
Remove the batteries if the device is not in use for a long period, in
order to avoid any leaks that may damage the unit.
4. USING THE APP
41. DATA TRANSFER
Download the BewellConnect® app
bw
My
Bab
y
Scale
Download the BewellConnect® app from your smartphone
or tablet store. (App Store for an iOS device, Play Store for
an Android device)
First use – Programming personal data
- Start by creating proles for yourself and your children
- Programme the proles by entering age, height and sex
Taking the measurement
- To track your child’s growth, connect your device (telephone, tab-
let) using Bluetooth (Bluetooth 4.0 smart Low Energy connectivi-
ty, compatible with iPhone 4s and up).
- Turn on the scale by pressing the on/o button.
- Open the BewellConnect® app and choose your child’s prole.
- Start MyBabyScale® and go to the measurement screen before
weighing your child, to save the data.
- Place the child on the baby scale.
- Data are measured and transferred to the smartphone or tablet
automatically with MyBabyScale®.
- You can consult the growth curves in the app.
42. APP FEATURES
MyBabyScale® lets you track your baby’s growth (weight and
height). However, other features are also available:
- Growth: Size, head circumference, arm circumference and waist
circumference.
- Breastfeeding: breastfeeding duration on the right breast, breast-
feeding duration on the left breast.
- Bottles: quantity of bottles, expressed milk or powdered milk.
- Sleep: duration.
- Nappy: consistency and amount of stools/urine.
- Mood: it is possible to add your baby’s mood whenever you enter
a new measurement. There is also the option to indicate whether
there has been any regurgitation.
The app helps you to achieve successful dietary diversication, pro-
viding advice on introducing foods into your baby’s diet from 0 to
3 years of age.
5. CLEANING AND MAINTENANCE
- Do not allow the weighing tray to become wet as this could make
it slippery and cause an accident.
- Store your baby scale horizontally.
- Store your baby scale in a dry place and away from moisture.
- Use a soft, dry cloth to clean the unit. If necessary, use a cloth
moistened slightly with tap water.
- Do not use alcohol, benzene, thinner or other chemicals to clean
the device.
- This product is not waterproof, avoid contact with liquid.
BewellConnect - BW-SCB1 - User Manual - 072016 BewellConnect - BW-SCB1 - User Manual - 072016
30 31
- If the unit has been exposed to temperatures below 0°C, be
sure to leave it for 30 minutes at room temperature before use.
Without this waiting period, the results could be wrong.
- If the baby scale is not in use for a long period of time, be sure to
remove the batteries (they could damage the device).
- Do not use rechargeable batteries.
6. AVOIDING MALFUNCTIONS
- Do not drop the device, avoid jolts and shocks.
- Do not insert anything into the device, excluding batteries.
- Do not disassemble the baby scale.
- Do not put the device in water.
-
7. TECHNICAL SPECIFICATIONS
Product name BewellConnect® MyBabyScale®
Reference BW-SCB1
Units of weight Ib:oz /kg
Item Units Minimum Maximum
Weighing measure -
ment range
kg 0.04 50
Ib oz 1.5 99Ib 15.5oz
Division kg 0.01
oz 0,5
Overload indicator “O-Ld”
Dimensions 420 x 340 x 100 mm
Weight 1.82kg
Normal conditions
of use
Temperature: 5 - 35°C
Humidity: 20 - 80%
Storage conditions Temperature: -10 - 50°C
Humidity: 20-80%
Bluetooth
technology 4.0 smart Low Energy
Power supply 2 LR6-AA batteries (supplied)
Low battery
indicator “LO”
Battery life 3-4 months (for 4 daily measure-
ments) Low battery indicator
Automatic
shutdown 1 minute
Accessories
supplied
One connected scale, one user
guide, one quick setup guide,
2 LR6-AA batteries
8. TROUBLESHOOTING GUIDE
If any of the following problems occur when using your
MyBabyScale®, please refer to this troubleshooting guide. If the
problem persists, please contact our customer support service.
BewellConnect - BW-SCB1 - User Manual - 072016 BewellConnect - BW-SCB1 - User Manual - 072016
32 33
SCREEN
ERROR
POSSIBLE
CAUSE(S) SOLUTION
“LO” appears Batteries used up Insert new batteries
“O-LD”
appears Overload warning
The maximum
weight supported
by the scale is 50kg.
Immediately remove
the weight from the
scale, or irreversible
damage may be
caused to the device.
BW-SCB1
ES
MyBabyScale