BIG KING HORN SPEAKER ENT PROPL4TX TRANSMITTER User Manual 500 550 Manual RFID New TX ICONS p65

Download:
Mirror Download [FCC.gov]
Document ID	1706302
Application ID	guFmIy0P/VXMSM8gLlGEzw==
Document Description	User Manual Part 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	263.71kB (3296344 bits)
Date Submitted	2012-05-24 00:00:00
Date Available	2012-05-24 00:00:00
Creation Date	2012-05-24 12:00:30
Producing Software	GPL Ghostscript 8.15
Document Lastmod	2012-05-24 12:00:30
Document Title	500-550 Manual (RFID & New TX ICONS).p65
Document Creator	PageMaker 6.5
Document Author:	Hircio

Disarming the Alarm
The system may be "Disarmed" by any of 3 methods:
1) Remote Control Disarming: Press & Release the “Unlock” button
THE SIREN WILL
CHIRP TWICE
THE PARKING LIGHTS
WILL FLASH TWICE
THE DOORS WILL UNLOCK
(IF CONNECTED)
2) SILENT Remote Control Disarming: Press & Release the “3rd”
button Twice within 3 sec
THE PARKING LIGHTS
WILL FLASH TWICE
2X
THE DOORS WILL UNLOCK
(IF CONNECTED)
Upon Disarm: • The siren will chirp twice. (4 chirps if alarm has activated & reset)
• The parking lights will flash twice. (4 times if alarm has activated)
• The doors will unlock. (If an optional interface is connected)
• The starter interrupt will disengage.
• The LED Status Indicator begins flashing rapidly for Automatic
Rearming, until alarm Rearms or a vehicle door is opened.
2-STAGE DISARM: If Disarming the alarm while it is triggered (siren sounding), the
first press of any remote control button will only silence the siren/horn. A second
press of the “Unlock” button will Disarm the alarm.
IMMOBILIZER MODE: If this mode is programmed “On”, the starter interrupt will
remain engaged after the alarm is Disarmed, until the ignition is turned “On” and you
Press & Release the Valet button. (Refer to programmable feature # 5)
To Start Vehicle: .
1. Disarm the alarm, then Turn “On” the vehicle’s ignition
2. Press & Release the Valet Button.
Emergency Override
Step 1:
Step 2:
Step 3:
With the system in the armed condition, enter the vehicle via the driver's
door (be aware that the alarm will trigger when the door is opened).
Using your key, turn the vehicle’s ignition to the "On" position.
Within 10 seconds, Press & Release the Valet/ Override Switch.
THEN WITHIN
10 SECONDS
Page 4
System Armed & Activated
Regardless of method used to Arm the alarm, once Armed, the alarm will monitor
all protected zones, and if an intrusion attempt is detected it will activate, or
“trigger”.
A trigger consists of the following:
• The electronic siren, or optionally the vehicle’s horn, will start sounding.
• The exterior parking lights will flash on and off repeatedly.
An activation has a 30 second duration unless the system is disarmed using the
remote control or the Valet /Override switch. If all protected zones are secure at
the end of the trigger, the system will stop and rearm itself to detect further entry
attempts. If a protected zone is still open at the end of the trigger cycle, the alarm
will continue to re-trigger itself for up to six activated cycles before it resets itself
and ignores the violated zone.
Remote Panic Operation
Should it be needed in a threatening situation, or you feel the need to attract
attention, the alarm can be triggered using the remote control. Your alarm features “Panic Mode”, which allows you to activate “Panic” from the “Arm/Lock”
button.
To Activate Remote Panic: Press & Hold the “Arm/Lock” Button,
for 3 seconds, with the ignition “Off”.
THE SIREN WILL SOUND
THE PARKING LIGHTS
WILL FLASH
Hold 3 seconds
Sensor By-pass
The shock sensor & Prewarn zone can be by-passed using the remote
control. This may be useful in stormy weather.
1) Arm the alarm by, Pressing & Releasing the “Lock” button.
2) Within 2 seconds, Press & Release the “3rd” button.
1.
Then 2.
- The siren will chirp once to confirm sensor has been by-passed.
- Upon Disarming the alarm, the sensor zone will reset.
Page 5
The Auxiliary Channel
The Auxiliary Channel may be used to operate an optional function. Possibilities include remote trunk release, remote car starting, or an on-demand remote window roll-up interface. Please see your Omega dealer for details on
available options.
To Activate the Auxiliary Channel:
Press & Hold the “3rd” Button for 3 Seconds.
Opperate Window RollUp Unit
Opperate Remote Start Unit
Open Electric Trunk
Hold 3 seconds
- The alarm will Disarm upon activating the Auxiliary channel.
- The Auxiliary Channel cannot be activated if the vehicle's ignition is "On".
The 3rd Channel Auxiliary Output
The programmable 3rd Channel may be used to operate an optional function,
such as a remote start unit or an on-demand remote window roll-up interface.
Please see your Omega dealer for details on available options.
To Activate the 3rd Channel:
Press & Hold the “4th” button for 3 Seconds.
Opperate Window RollUp Unit
Hold 3 seconds
Opperate Remote Start Unit
- The 3rd Channel can be programmed to Supply a (-) output when the alarm
is Armed to operate a Window Roll-Up module (Programmable feature # 12).
Remote Anti-Carjack
The Anti-Carjacking mode can be activated using the remote control.
- Refer to next page for sequence details. (programmable feature # 10)
To Activate Remote Anti-Carjack:
Press & Hold The “4th” Button, For 3 Seconds, With The Ignition “On”.
Hold 3 seconds
Page 6

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Modify Date                     : 2012:05:24 12:00:30-04:00
Create Date                     : 2012:05:24 12:00:30-04:00
Metadata Date                   : 2012:05:24 12:00:30-04:00
Creator Tool                    : PageMaker 6.5
Format                          : application/pdf
Title                           : 500-550 Manual (RFID & New TX ICONS).p65
Creator                         : Hircio
Document ID                     : uuid:d4521130-d7e9-4e13-a815-9a406d0bfa82
Instance ID                     : uuid:575c1562-1c73-45c5-9e4b-2951f14813a3
Producer                        : GPL Ghostscript 8.15
Page Count                      : 3
Author                          : Hircio

EXIF Metadata provided by EXIF.tools