BIG KING HORN SPEAKER ENT PROPL4TX TRANSMITTER User Manual 500 550 Manual RFID New TX ICONS p65

BIG KING HORN SPEAKER ENT. CO., LTD. TRANSMITTER 500 550 Manual RFID New TX ICONS p65

User Manual Part 2

The system may be "Disarmed" by any of 3 methods:1) Remote Control Disarming: Press & Release the “Unlock” button2) SILENT Remote Control Disarming: Press & Release the “3rd” button Twice within 3 secUpon Disarm:• The siren will chirp twice. (4 chirps if alarm has activated & reset)• The parking lights will flash twice. (4 times if alarm has activated)• The doors will unlock. (If an optional interface is connected)• The starter interrupt will disengage.• The LED Status Indicator begins flashing rapidly for Automatic Rearming, until alarm Rearms or a vehicle door is opened.2-STAGE DISARM: If Disarming the alarm while it is triggered (siren sounding), thefirst press of any remote control button will only silence the siren/horn. A secondpress of the “Unlock” button will Disarm the alarm. IMMOBILIZER MODE: If this mode is programmed “On”, the starter interrupt will remain engaged after the alarm is Disarmed, until the ignition is turned “On” and youPress & Release the Valet button. (Refer to programmable feature # 5) To Start Vehicle: . 1. Disarm the alarm, then Turn “On” the vehicle’s ignition 2. Press & Release the Valet Button. Step 1: With the system in the armed condition, enter the vehicle via the driver'sdoor (be aware that the alarm will trigger when the door is opened). Step 2: Using your key, turn the vehicle’s ignition to the "On" position. Step 3: Within 10 seconds, Press & Release the Valet/ Override Switch.Page 4Disarming the AlarmEmergency Override THEN WITHIN 10 SECONDS THE PARKING LIGHTSWILL FLASH TWICETHE DOORS WILL UNLOCK(IF CONNECTED) THE SIREN WILLCHIRP TWICE THE PARKING LIGHTSWILL FLASH TWICETHE DOORS WILL UNLOCK(IF CONNECTED)2 X
Regardless of method used to Arm the alarm, once Armed, the alarm will monitorall protected zones, and if an intrusion attempt is detected it will activate, or“trigger”.A trigger consists of the following:• The electronic siren, or optionally the vehicle’s horn, will start sounding.• The exterior parking lights will flash on and off repeatedly.An activation has a 30 second duration unless the system is disarmed using theremote control or the Valet /Override switch. If all protected zones are secure atthe end of the trigger, the system will stop and rearm itself to detect further entryattempts. If a protected zone is still open at the end of the trigger cycle, the alarmwill continue to re-trigger itself for up to six activated cycles before it resets itselfand ignores the violated zone.Should it be needed in a threatening situation, or you feel the need to attractattention, the alarm can be triggered using the remote control. Your alarm fea-tures “Panic Mode”, which allows you to activate “Panic” from the “Arm/Lock”button.To Activate Remote Panic:Press & Hold the “Arm/Lock” Button,for 3 seconds, with the ignition “Off”.The shock sensor & Prewarn zone can be by-passed using the remotecontrol. This may be useful in stormy weather.1) Arm the alarm by, Pressing & Releasing the “Lock” button.2) Within 2 seconds, Press & Release the “3rd” button.- The siren will chirp once to confirm sensor has been by-passed.- Upon Disarming the alarm, the sensor zone will reset.Sensor By-passSystem Armed & ActivatedRemote Panic OperationPage 5Then 2.THE SIREN WILL SOUNDTHE PARKING LIGHTSWILL FLASH Hold 3 seconds1.
The Auxiliary Channel may be used to operate an optional function. Possibili-ties include remote trunk release, remote car starting, or an on-demand re-mote window roll-up interface. Please see your Omega dealer for details onavailable options.To Activate the Auxiliary Channel:Press & Hold the “3rd” Button for 3 Seconds.- The alarm will Disarm upon activating the Auxiliary channel.- The Auxiliary Channel cannot be activated if the vehicle's ignition is "On".The programmable 3rd Channel may be used to operate an optional function,such as a remote start unit or an on-demand remote window roll-up interface.Please see your Omega dealer for details on available options.To Activate the 3rd Channel:Press & Hold the “4th” button for 3 Seconds.- The 3rd Channel can be programmed to Supply a (-) output when the alarmis Armed to operate a Window Roll-Up module (Programmable feature # 12).The Anti-Carjacking mode can be activated using the remote control.- Refer to next page for sequence details. (programmable feature # 10)To Activate Remote Anti-Carjack:Press & Hold The “4th” Button, For 3 Seconds, With The Ignition “On”.Page 6The Auxiliary ChannelRemote Anti-CarjackThe 3rd Channel Auxiliary Output Hold 3 seconds Hold 3 seconds Opperate Remote Start UnitOpperate Window Roll-Up Unit Hold 3 secondsOpen Electric TrunkOpperate Window Roll-Up UnitOpperate Remote Start Unit

Navigation menu