BLUEBIRD BIP1530 Industrial PDA User Manual USERS MANUAL 2
BLUEBIRD INC. Industrial PDA USERS MANUAL 2
BLUEBIRD >
Contents
- 1. USERS MANUAL 1
- 2. USERS MANUAL 2
USERS MANUAL 2
&RQWDFWV .FOV 3The contact will be saved when the attributes are imputed in order. Press [OK] to save in Contacts. Press and select the [Menu] button on the bottom right of the contacts screen. Edit : You can edit a saved contact. Send Contact : You can send a contact wirelessly. Contact copy/delete : You can copy/delete a selected contact. Option : You can do the setup ofand . Display standards : You can set up the standards of the contacts for the names/companies. Filter : You can filter the selected items. Selecting Contacts : You can multi-select or select all. 40 BIP-1530 Manual &DPHUD BIP-1530 5BLJOH1IPUPT Start Äś Camera Video : Switches to Video mode. Mode : You can set it up as normal/bust/timer. Resolution : You can set various resolutions of 480x640 / 600x800 / 768x1024 / 1536x2048. Your photo will be taken when you press the [OK] button. The photo/video will be automatically saved in the album. Flash : You can turn on/off your flash. Full-Screen : You can change your display to full screen. Option : You can change the name/storing location/file size. 41 &DPHUD 7JFXJOH1IPUPT You can do the following options : Delete / Send / Wireless-transfer / Set up as background / Enlarge / Edit / Properties with the photo / Video. äIf the battery is too low, the camera will turn off or will not open. äIf not in use more than a minute, it will go into sleep mode. äIf the device can shoot video, the user manual will vary depending on the camera program. 42 BIP-1530 Manual Start Äś Photos and Video You can Enlarge/Reduce or check the information of the saved Photo/Video. BIP-1530 The selected Photo/Video can be Enlarged / Reduced / Viewed with as a slideshow/set as a background / Wireless-transfer / Save / Edit /Properties. 43 6HWWLQJV #MVFUPPUI Setup for the communication of Bluetooth equipment. Search surrounding Bluetooth devices and pair (connect). Start Äś Settings Äś Bluetooth Turning on Bluetooth Set up as on/off. (If not in use, it will drain your battery.) Way to set up your Bluetooth Making your device discoverable Other devices and search and discover your BIP-1500 device. 44 BIP-1530 Manual 1Press [Search for devices] to search other Bluetooth devices. 2Select a Bluetooth device and press [Next]. BIP-1530 -PDL 3Type in the password to connect with the selected device and press [Next]. (The password will be different for every device. Please refer to manual) 4Check if you are connecting to the right device. It correct, press [Finish]. 5If the model name and icon of the device you have chose appears, you are finished connecting. Password Set up a password for your device every time you turn it on. Start Äś Settings Äś Lock You must input your password twice. After selecting [Press ok if the device is not used for the following time] set up a time. The pairing method is different for every Bluetooth devices. Please read the manual for other Bluetooth devices. The password must be 4~6 characters long. Simple passwords such as [1111] or [1234] cannot be used. 45 6HWWLQJV 46 If the [Check if the device is not used for the following time] is set up, the screen below will show when turning on your device. Hint Type in a phrase in which will help you to remember your password. After inputting your password, press the [Unlock] button on the bottom of the screen. If you get the password wrong 4 times in a row, a [Hint] window will appear. BIP-1530 Manual BIP-1530 4PVOEBOE/PUJGJDBUJPOT Sound You can set up your event, program, screen pressing, hardware button notification sounds. Notifications You can set the Notifications sounds when the (sound and notification) is set up. Start Äś Settings Äś Sound and Notifications. Start Äś Settings Äś Sound and Notifications Äś Notifications If you check each item the (sound and notification) will be setup with a sound. You can set the phone, wireless network, notification, Activesync, and etc sounds by Ring/Vibration. 47 6HWWLQJV )PNF Background Display You can set up your photos as the home screen background. Start Äś Settings Äś Home 1After selecting [Use this as background] press the [Find] button. 2Select the folder that has the photo you want to use in [Folder]. 3Select your photo. 4After selecting you photo press [OK]. 48 BIP-1530 Manual Items You can set up items to be displayed on your home screen. Start Äś Settings Äś Home Äś Items When you check the item it will be shown on your home screen. You can set the order of the items that are going to be shown by using the [Move up] / [Move down] button. BIP-1530 6TFS*OGPSNBUJPO You can set up a memo or your personal information. Start Äś Settings Äś Personal Äś User Information You can set your name, company name, address, phone number, email address, and memo to be shown when your device turns on. 1IPOF Phone You can adjust/turn off the devices sounds. Start Äś Settings Äś Personal Äś Phone Ring/Vibration : You can set as Ring / Ring(getting louder) / Ring only once / vibrate / Ring and vibrate / Ring after Vibrate / None. Ring tones : You can adjust the Ring tones. Keypad : The key pad sound can be adjusted to Long tone / Short tone / Off when keypad is selected. 49 6HWWLQJV %JTQMBZ-JHIU Battery power / Exterior power To save battery, you can set the battery power and exterior power to be turned off automatically. Start Äś Settings Äś System Äś Display Light The shorter you adjust your display time, the longer your battery will last. You can turn the light back on again by press the buttons of the display. 50 BIP-1530 Manual Brightness Use the slider bar to adjust the brightness. Start Äś Settings Äś System Äś Display Light Äś Brightness If you set the brightness of PDA close to [Darker] mode, the battery of PDA will last longer. BIP-1530 &YUFSOBM(14 Program Select the port you want to use by receiving data from the programâs external GPS. (4FOTPS You can set up the usage for the G-Sensor. Start Äś Settings Äś System Äś G-Sensor Start Äś Settings Äś System Äś External GPS All the programs using GPS can communicate with this port. Hardware You can designate the hardware port in which GPS devices will connect to. Access If you select [Automatic GPS management] you can receive multiple programâs GPS data simultaneously. 51 6HWWLQJV .FNPSZ 6OJOTUBMMJOH1SPHSBNT The memoryâs current state (Usage, Available space) will be displayed. Start Äś Settings Äś System Äś Memory Start Äś Settings Äś System Äś Uninstall Program Main memory You can check the memory for Total/Usage/Available space of storage and programs. Select the program you want to uninstall on the list. Press [Uninstall] and it will automatically be removed. Storage Card You can check the usage/available space of the Micro SD memory card and the program store. 52 BIP-1530 Manual The programs installed by the user or in default will be displayed. BIP-1530 %JTQMBZ 1SPHSBN.POJUPS General You can change the screen vertically, horizontally (right hand), horizontally (left hand) Start Äś Settings Äś System Äś Display You can readjust the stylus pen points by pressing the [Display Adjust] button. The memory status of running programs will be displayed Start Äś Settings Äś System Äś Program Monitor Using the menu you can select the running programs and to stop it. You can also stop all the programs running at once. Text Size You can adjust your text in 5 sizes. 53 6HWWLQJV 64#1$$POOFDUJPO You can connect with a PC. BIP-1530 Manual Setting up the wireless internet with Wi-Fi. Start Äś Settings Äś Connections Äś USB-PC connection Start Äś Settings Äś System Äś Wi-Fi The computer uses a tunneling VPS can connect with your device with RNDIS. In this case, try to connect un-checking the [Advanced Network Function]. Through the wireless internet settings, you can set up the Wi-Fi that connects the surrounding AP (access point). If the [ActiveSync] does not work properly, try using the [Advanced Network Function]. 54 8J'J BIP-1530 46..*5 Setting up Wireless Internet 3Select the [Profile] buttons on the bottom. 1Select the [Admin Login] button on the top right. 2Type in SUMMIT(Capitalized) in the password box and press [OK] button. 4Select the [Scan] button on the top right. 55 6HWWLQJV 5A list of AP your device can connect to will appear. Connect to ex.) Platform_AP2. (Please select a desired AP) When the popup appears, Press [YES]. 6T ype password in the box of the AP you wish to connect and press [OK] buttons. 56 BIP-1530 Manual 7Once you press [Commit], you will be connected to the internet. 'HYLFH6SHFLILFDWLRQV Item 8$%." Features TJOHMFCBOE.)[6.54)4%1" $16 .BSWFMM19".)[ 04 8JOEPXT.PCJMF .FNPSZ 3"..#30..# %JTQMBZ â27("Y5PVDI8JOEPX â7("Y5PVDI8JOEPX 0QUJPOBM 8-"/ *&&&CH *&&&BCH 0QUJPOBM #MVFUPPUI #MVFUPPUI7 &%3 $MBTT (14 $BNFSB "(14TVQQPSU 4J3'*OTUBOU'JYÉ ."'-&%'MBTI 4MPU .JDSP4% 64# 64#'VMM4QFFE BIP-1530 Item Features #BUUFSZ %JNFOTJPO *OUFSGBDF 0QFSBUJPO5FNQFSBUVSF &OWJSPONFOU 8-"/ 'SFRVFODZ #MVFUPPUI N")-JJPO UIFSNBMQSJOUFS - Y 8 Y % NN UIFSNBMQSJOUFS - Y 8 Y % NN 1JO1PSU °UP°'°UP°$ N4UFFMTVSGBDFESPQTQFSTJEFT *&&&CH *&&&BCH 0QUJPOBM 'SFRVFODZ .)[_ .)[ /VNCFSPGDIBOOFMT "OUFOOBQPXFSN8BOEMFTT .PEVMBUJPOUZQF'% 57 9DOXH3DFN'HWDLOV 1*/1"% 1-1. Parts of the pack LED to check the state of the pack. MSR LCD Main to PINPAD contact terminal PINPAD separation button RFID ANT Keypad IC card slot 58 BIP-1530 Manual SAM Slot BIP-1530 1-2. Paying with card 1-2-1. Paying with MSR 1-2-2. Paying with IC Card The card can be swiped in both directions. Please swipe the card fluidly. Insert with the card with the IC chip going in first. Please make sure to insert the card all the way. 59 9DOXH3DFN'HWDLOV 1-3. Installing/Removing the PINPAD 60 1-2-3. Paying with RFID 1-3-1. Installing the PINPAD Make sure you place the card on the RFID antenna. Install the PINPAD in the direction of the arrows. BIP-1530 Manual BIP-1530 1-3-2. Removing the PINPAD To remove, press the [PINPAD remove button] to slide the PINPAD out in the arrow direction. 61 9DOXH3DFN'HWDLOV 'JOHFS4DBO 2-1. Each part explained LED to check the state MSR The main Finger scan terminal Finger scan remove button RFID ANT Finger scan Module SAM Slot IC Card Slot 62 BIP-1530 Manual BIP-1530 2-2. Paying with card 2-2-1. Paying with MSR 2-2-2. Paying with IC card The card can be swiped in both directions. Please swipe the card fluidly. Insert with the card with the IC chip going in first. Please make sure to insert the card all the way. 63 9DOXH3DFN'HWDLOV 2-3. Using the Finger scan 2-4. Installing/Removing the Finger scan 2-4-1. Installing the Finger scan Your device will start scanning once you have placed your finger on the Finger scan. 64 BIP-1530 Manual Install the Finger scan in the arrow direction. BIP-1530 2-4-2. Removing the Finger scan To remove, press the Finger scan remove button and slide it downwards. 65 9DOXH3DFN'HWDLOV 1BZNFOU 3-1. Each part explained LED to check the state MSR Main Payment Terminal Payment Remove button RFID ANT SAM Slot IC Card Slot 66 BIP-1530 Manual BIP-1530 3-2. Paying with card 3-2-1. Paying with MSR 3-2-2. Paying with IC card The card can be swiped in both directions. Please swipe the card fluidly. Insert with the card with the IC chip going in first. Please make sure to insert the card all the way. 67 9DOXH3DFN'HWDLOV 1-3. Installing/Removing the payment equipment 68 1-3-1. Installing the payment equipment 1-3-2. Removing the Payment equipment Install the payment equipment in the arrow direction. To remove, press the remove button and slide it downwards. BIP-1530 Manual BIP-1530 4OBQPO 4-1. Each parts explained Snap on separation hook RS232 Serial Port USB Port Power Connector 69 9DOXH3DFN'HWDLOV 4-2. Installing/Removing Snap on 70 4-2-1. Installing Snap on 4-2-1. Removing Snap on Slide the snap on in the arrow direction to install. Press the remove buttons and slide it downwards to remove. BIP-1530 Manual 9DOXH3DFN BIP-1530 $POOFDUJOHUIFIBOETUSBQ Connect the hand-strap on the battery coverâs hand-strap holder. 71 9DOXH3DFN $POOFDUJOHUIF4IPVMEFS4USBQ Connect the shoulder strap on both sides of the deviceâs Shoulder strap holder. 72 BIP-1530 Manual BIP-1530 $POOFDUJOHUIF*$$BSEDPWFS Install the IC card cover in the PINPAD/ Payment equipment / Finger scan/ IC card slot. Connect the IC card cover strap on the shoulder strap holder. 73 4 $ Water went into my device. What do I do? It wonât turn on. It wonât charge. First, remove your battery from the device and dry them in a dry place. After drying for a period of time try turning it on. If it still does not turn on, the main-board or other parts needs to be replaced. Please refer to your service center. The program may be damaged. Please try resetting your device. If it still doesnât work, refer to your service center. Make sure the power cable and your device has been connected correctly. Try cleaning your charging terminals. If it still doesnât work, your battery life might be finished or it can be a broken battery. (The battery warranty is 6 menthes) How do I get the repair service? My battery drains very quickly. You can send via a delivery service to the headquarters. When sending the package make sure you pay for the shipping fee in advance. When the repair is finished the headquarters will be covering the shipping fee. The battery can be drained quickly when the Wi-Fi or Bluetooth is turned on. If it drains quickly regardless of using the options above, please purchase another battery. ŕ° If you have done the above and the device still does not work, please refer to the service center. ŕ° After the 1 year warranty the repair service will be charged. 74 BIP-1530 Manual 6HUYLFH&HQWHU Before Requesting After-Sales Service Before asking for after-sales service, please back up the data from the terminal. We do not back up data from the products received in the Customer Care Center. Therefore, we assume no responsibility for loss/deletion of data. Bluebird Soft Customer Service FAX : +82-2-548-0870 E-Mail : mookseven@bluebird.co.kr Address : 1242, Gaepo-dong, Gangnam-gu, Seoul, Korea Operating hours Mon.-Fri. : 9:30 A.M. ~ 6:30 P.M. (GMT Time: +9 Hours) The center is closed on Saturdays, Sundays and holidays. BIP-1530 Registering for After-Sales Service We receive the products for after-sales service through mail, delivery service and hand carry only in principle. If you bought the product from any party other than the authorized dealer, you need to register the product before asking for after-sales service. Please enclose an evidence of purchasing or the receipt to the product for after-sales service. Please enclose the name, telephone number, address and symptom for prompt service. You can ask for after-sales service through the dealer or the Customer Care Center in the head office. Do not intentionally damage the label on the product. Damaged label may result in a disadvantage to the customer. When you return the product to Bluebird Soft for service, please put the product in a protective box. No warranty will not be provided for any damage occurring during delivery. We recommend you to use the box and protective cover supplied with the product. Make sure to deliver the product in a safe way. Bluebird Soft assumes no responsibility for loss of the product during delivery. 75 6HUYLFH&HQWHU Charged Service 1. If it is not a default, it will be charged when requesting for after-sales service. - Service request due to inappropriate use of the customer - Loss of a PIN number - Use of programs that might effect the program (over-clock, forceful changes in the input of the system, personal developments) 2. Default due to a mistake on the part of the customer - Default due to inappropriate or careless use of the product (dropping, submersion under water, shock, damage, unreasonable operations, etc). - Default due to a repair or unauthorized technician. - Default caused intentionally or by carelessness of the customer. - Default due to the use of fraudulent parts or components. 3. Other cases - Default due to nature (fire, damage due to sea wind, flood damage, etc.). - Expendable parts have exhausted there life (batteries, antenna, or other component parts). 76 BIP-1530 Manual 4. Regulations of treatment after charged service - If the same default occurs on the part that had been repaired within a 2 months(60 days) period, it will be provided with free of charge repair service. There will be no returning of goods or repayment upon the following situation Removal of the sealing of the product if it had been sealed. If the product has been damaged due to careless use by the customer or due to a natural disaster (floods, rain, fire, etc.). Loss of product or other components (CD, diskette, manual, connecting cables, etc). Damage to the product after 10 days of purchase, the product will either be exchanged or provided with after-sales service (note, returning of goods or repayment is not allowed). :DUUDQW\&HUWLILFDWH BIP-1530 Thank you for purchasing a product from Bluebird Soft Inc. If a circumstance arises where you lose a receipt or the certificate of guarantee, then the term of guarantee will be calculated 3 months (certified by the number of the manufacture, a certificate of inspection) after the date of manufacture. Name of Product PDA Name of Model BIP-1530 Date of Purchase In case of accessories (such as batteries), only those that match the sales list managed by the service center will be eligible for customer service. Manufacture Number A repair or an exchange of batteries that does not match the sales list of the service center due to the carelessness of the customer will be fully charged. Term of Guarantee Place of Purchase 1 year from purchase 77 :DUUDQW\&HUWLILFDWH Warranty 1. Bluebird Soft Inc. (hereinafter referred to as Bluebird) provides the warranty service for its products in compliance with the regulations on compensation for damage of customer. 2. Upon receiving a notification on a defect of its product within the range of warranty during the warranty period, Bluebird will repair or replace the defective product according to its warranty policy. 3. If the defective product within the range of warranty is not repairable or replaceable, Bluebird shall refund the purchasing price within a designated period from the date of receiving a notice of defect. 4. Bluebird assumes no responsibility for repairing, replacement or refund until it receives the defective product from the customer. The replacement shall be equivalent to a new product in the aspect of performance. 78 BIP-1530 Manual 5. Warranty of Bluebird is valid in the countries where the Bluebird products are distributed by Bluebird. (Contract for additional warranty service like field service) 6. Bluebird products may contain the recycled products, components or materials equivalent to new products in the aspect of performance. 7. This warranty is applied to software products only when the programming commands are not executed. Bluebird does not guarantee interruption-free or error-free performance. BIP-1530 Customers Service Center Hours Mon.- Fri. : 9:30 A.M. ~ 6:30 P.M. (GMT Time: +9 Hours) We are not open on Saturday, Sundays and National Holidays. Address : 1242 Gaepo-dong, Gangnam-gu, Seoul, Korea Bluebird constantly strives to bring utmost satisfaction to all our customers. 79
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Instance ID : uuid:86c1cf2f-5a07-46fd-a455-40eecc7b9afc Document ID : xmp.did:C306DB2689EDE111BDDAE4810504B3B7 Original Document ID : adobe:docid:indd:e571314e-b5e4-11e1-a2ed-d566eb13880a Rendition Class : proof:pdf Version ID : 1 Derived From Instance ID : xmp.iid:7F75352689EDE111BDDAE4810504B3B7 Derived From Document ID : xmp.did:3CAC76CD73EAE111AAC0CE878CA6AC90 Derived From Original Document ID: adobe:docid:indd:e571314e-b5e4-11e1-a2ed-d566eb13880a Derived From Rendition Class : default History Action : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:D731A8A68FD4E111BFCDC6F01F39E053, xmp.iid:D831A8A68FD4E111BFCDC6F01F39E053, xmp.iid:CC31D81590D4E111BFCDC6F01F39E053, xmp.iid:CD31D81590D4E111BFCDC6F01F39E053, xmp.iid:47E857BC02E2E111A057C0ADD09AFD73, xmp.iid:3C99ACBC02E2E111A057C0ADD09AFD73, xmp.iid:0CAC9B0703E2E111A057C0ADD09AFD73, xmp.iid:65B167D303E2E111A057C0ADD09AFD73, xmp.iid:E39B3A87C2E2E1119AE3A5880DCBF681, xmp.iid:E49B3A87C2E2E1119AE3A5880DCBF681, xmp.iid:FD116ECC73EAE111AAC0CE878CA6AC90, xmp.iid:3CAC76CD73EAE111AAC0CE878CA6AC90, xmp.iid:44399EF674EAE111AAC0CE878CA6AC90, xmp.iid:C668423FACEAE1119B638F8208F33AA9, xmp.iid:7F75352689EDE111BDDAE4810504B3B7, xmp.iid:C306DB2689EDE111BDDAE4810504B3B7, xmp.iid:6EDCDEF08CEDE111BDDAE4810504B3B7 History When : 2012:07:23 15:28:43+09:00, 2012:07:23 15:28:44+09:00, 2012:07:23 15:31:50+09:00, 2012:07:23 15:34:54+09:00, 2012:08:09 18:15:17+09:00, 2012:08:09 18:15:18+09:00, 2012:08:09 18:17:23+09:00, 2012:08:09 18:23:05+09:00, 2012:08:10 17:08:11+09:00, 2012:08:10 17:22:44+09:00, 2012:08:20 12:04:46+09:00, 2012:08:20 12:04:48+09:00, 2012:08:20 12:13:07+09:00, 2012:08:20 18:48:52+09:00, 2012:08:24 10:15:10+09:00, 2012:08:24 10:15:11+09:00, 2012:08:24 10:42:19+09:00 History Software Agent : Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5 History Changed : /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata Create Date : 2012:09:25 06:36:44+09:00 Modify Date : 2012:09:25 09:28:24+09:00 Metadata Date : 2012:09:25 09:28:24+09:00 Creator Tool : Adobe InDesign CS5.5 (7.5.3) Page Image Page Number : 1, 2 Page Image Format : JPEG, JPEG Page Image Width : 256, 256 Page Image Height : 256, 256 Page Image : (Binary data 7412 bytes, use -b option to extract), (Binary data 6685 bytes, use -b option to extract) Doc Change Count : 123 Format : application/pdf Title : BIP-1530 매뉴얼 영문 (120824).indd Producer : Acrobat Distiller 9.4.6 (Windows) Trapped : False GTS PDFX Version : PDF/X-1:2001 GTS PDFX Conformance : PDF/X-1a:2001 Page Count : 40 Creator : Adobe InDesign CS5.5 (7.5.3)EXIF Metadata provided by EXIF.tools