BUFFALO 09101731-0 Wireless LAN Card User Manual WLI CF S11G
BUFFALO INC. Wireless LAN Card WLI CF S11G
BUFFALO >
Contents
Users Manual Part 2
WLI-CF-S11G.book 31 ページ 2002年3月1日 ■ Overview This chapter describes how to make the settings for connecting your Windows Me/98 computer to a wireless LAN. 金曜日 午後6時16分 Chapter 3 Windows Me/98Settings Capter 3 3.1 Making the Wireless LAN Card Available Step 1 Before installing the wireless LAN card Step 2 Installing the wireless LAN card ......................... 40p Step 3 Installing the wireless LAN card drivers ................................................................... 43p Step 4 Confirming that the installed wireless LAN card is normally operating .......................... 47p ............ 34p 3.2 Preparing for Connecting to the Network Step 5 Confirming "TCP/IP" and "Client for Microsoft Networks" ............................................ 49p Step 6 Adding "File and printer sharing for Microsoft Networks" ............................................56p Step 7 Checking the computer name and workgroup name .................................................. 57p Step 8 Installing Client Manager .................................... 58p 3.3 Connecting to the Network Step 9 -a Communicating via AirStation ........................... 62p Step 9 -b Communicating with wireless LAN computers ............................................................ 64p Step 10 Making your computer shared Step 11 Starting communication ...................................... 67p ........................... 66p WLI-CF-S11G.book 32 ページ 2002年3月1日 WindowsMe/98 金曜日 午後6時16分 Operation Flow Follow the procedure in the illustration below to connect your Windows Me/ 98 computer to a wireless LAN. Making the wireless LAN card available (from page 34) Step 1 Check the configuration of the drives on your Windows computer and confirm that its PC card driver operates normally. Step 2 Install the wireless LAN card in the Windows computer. Preparing for connecting to the network (from page 49) Step 5 Confirm that the "TCP/IP" and "Client for Microsoft Networks" are installed. Step 6 Add "File and printer sharing for Microsoft Networks." Connecting to the network (from page 62) Step 9 -a, b Make the settings for access to the network. a...AirStation b...Wireless LAN computers 32 WLI-CF-S11G User’s Manual Step 10 Make the wireless LAN computer shared. WLI-CF-S11G.book 33 ページ Step 3 Install the wireless LAN card drivers in the Windows computer. 2002年3月1日 金曜日 午後6時16分 Step 4 Confirm that the installed wireless LAN card operates normally. Check the computer name and workgroup name. Windows Me/98 Settings Step 7 Step 8 Install Client Manager for communicating with other wireless LAN computers. Step 11 Communicate with other computers on the network. To make the AirStation settings, refer to the AirStation manual. WLI-CF-S11G User’s Manual 33 WLI-CF-S11G.book 34 ページ 2002年3月1日 金曜日 午後6時16分 3.1 Making the Wireless LAN Card Available Install the wireless LAN card to connect your Windows Me/98 computer to a wireless LAN. Step 1 Before installing the wireless LAN card Checking the configuration of your drives Follow the procedure below to check the configuration of the drivers on your Windows computer in which the wireless LAN card will be installed. The following procedure uses Windows Me for example. Turn on the computer to boot Windows. Double-click [My Computer] on Desktop. Select [View]-[Detail]. Check the drive names listed in the window. These displayed drive names will be necessary in the subsequent procedures. Be sure to take note of these drive names in the table on the upper right of the next page. 34 WLI-CF-S11G User’s Manual WLI-CF-S11G.book 35 ページ 2002年3月1日 金曜日 午後6時16分 Drive names on your computer Drive Type Icon Drive Name (e.g.) 3.5" FDD (A:) HDD (local disk) (C:) CD-ROM (D:) If your computer has only one PC card slot WLI-CF-S11G User’s Manual 35 Windows Me/98 Settings If the CD-ROM drive is connected via the PC card to a computer with only one PC card slot, the CD-ROM drive and this wireless LAN card cannot be used at the same time. Execute the following steps before installing the PC card driver. 1 Connect the CD-ROM drive to the computer. 2 Insert the "AirStation Driver CD" into the CD-ROM drive. 3 Create a new folder (directory) on the hard disk, and copy all files from the CD-ROM to that folder. When you are prompted for the "AirStation Drier CD" during installation, specify the folder to which the files were copied in the above Step 3. ⇒ Continued on next page WLI-CF-S11G.book 36 ページ 2002年3月1日 金曜日 午後6時16分 Checking the PC card driver Follow the procedure below to verify that the PC card driver on the computer in which the wireless LAN card will be installed is operating normally. Right-click [My Computer] on Desktop. Click [Properties]. Click the [Device Manager] tab. Click the "+" mark on the left of [PCMCIA socket]. Confirm that the "x" mark is not indicated for the icon under [PCMCIA socket]. The displayed PCMCIA socket name varies with the computer model. 36 WLI-CF-S11G User’s Manual WLI-CF-S11G.book 37 ページ 2002年3月1日 金曜日 午後6時16分 If such an error mark as "!" or "x" is not indicated, the PC card driver is operating normally. If the icon displayed under [PCMCIA socket] appears with the ! or x mark, refer to the manual included in the computer and activate the PC card driver. Checking the browser settings (only for using the AirStation) When you use the AirStation, invalidate the dial-up settings and proxy settings under the browser settings. The following procedure uses Internet Explorer 5.0 or later for example. Select [Start]-[Settings]-[Control Panel]. Double-click [Internet Options]. Double-click the [Connections] tab. When the provider information is listed in the [Dial-up settings] area, click the ○ mark on the left side of [Never dial a connection] below the area to put a dot mark. Click [LAN settings] in the "Local Area Network (LAN) settings" area. ⇒ Continued on next page WLI-CF-S11G User’s Manual 37 Windows Me/98 Settings WLI-CF-S11G.book 38 ページ 2002年3月1日 金曜日 午後6時16分 Confirm the items with a checkmark. For memorandum, put a checkmark for the same items below. □ Automatically detect settings □ Use automatic configuration script □ Use a proxy server □ Bypass proxy server for local addresses Upon completion of confirming the items with the checkmark, remove the checkmark from all the items. Checking the network adapter Confirm the current settings of the network function. Select [Start]-[Settings]-[Control Panel]. Double-click [System]. Click [Device Manager]. With [View devices by type] selected, click the "+" mark on the left side of [Network adapters]. The current adapters are listed. 38 WLI-CF-S11G User’s Manual WLI-CF-S11G.book 39 ページ 2002年3月1日 金曜日 午後6時16分 Disable a LAN board or card if any name. If there is no LAN board or card name listed, proceed to Step 5. Put a checkmark for "Disable in this hardware profile." If any name beginning with "AOL" is found under [Device Manager]-[Network adapters], disable it in the same manner as Step 4. Click [OK] to close the [Device Manager]. If you have disabled any driver in Steps 4 and/or 5, restart the computer. WLI-CF-S11G User’s Manual 39 Windows Me/98 Settings WLI-CF-S11G.book Step 2 40 ページ 2002年3月1日 金曜日 午後6時16分 Installing the wireless LAN card The wireless LAN card can be installed/removed in/from the computer which is in the ON state. If your computer is equipped with a power management function that automatically cuts power supply to the computer when it is left idle for a certain period, turn the function off. The wireless LAN card may be disabled if the power management function starts. Refer to the manual provided with the computer for details on the power management function. Precautions for installation/removal • Be sure to handle the computer and its peripherals in such a way as described in the manual of each unit. • Completely remove any dust from the connectors. • Never touch the connector portion of the wireless LAN card. • Use great care for the connector location of the wireless LAN card when installing the card in the computer. The connector may be damaged if it is forced. • The wireless LAN card can be inserted and removed with the computer turned on (Hot Swap feature). However, you should set the wireless LAN card in a safely removable state on Windows before removing it. See "When removing the wireless LAN card" on page 42. 40 WLI-CF-S11G User’s Manual WLI-CF-S11G.book 41 ページ 2002年3月1日 金曜日 午後6時16分 Installing the wireless LAN card in a notebook computer Follow the instructions in the illustration below when installing the wireless LAN card in a notebook computer. When inserting the wireless LAN card into the PC card slot on your computer, attach the BUFFALO's PC card adapter WLI-CFOP available separately. WLI-CF-S11G User’s Manual 41 Windows Me/98 Settings When your computer is equipped with two card slots As this wireless LAN card has a protruding section for the built-in antenna, the upper slot may be blocked when the lower one is occupied with this card. Place this wireless LAN card in the upper slot. WLI-CF-S11G.book 42 ページ 2002年3月1日 金曜日 午後6時16分 When removing the wireless LAN card Follow the procedure below to remove the wireless LAN card when the computer is running. The following procedure uses Windows ME for example. Click the removal icon in the task tray, and select "Stop BUFFALO WLI-CF-S11G Wireless LAN Adapter." ※ The removal icon may be [ ] on Windows 98. ※ The message displayed when you click the icon varies with the Windows version. ※ If you cannot find the icon, see the Windows Help. When the message "The 'BUFFALO WLI-CF-S11G Wireless LAN Adapter' device can now be safely removed from the system." is displayed, click [OK]. ※ The message to be displayed varies with the Windows version. Remove the wireless LAN card from the computer. 42 WLI-CF-S11G User’s Manual WLI-CF-S11G.book Step 3 43 ページ 2002年3月1日 金曜日 午後6時16分 Installing the wireless LAN card drivers Please check the configuration of the drives on your computer (page 34) before installing the drivers. In addition, confirm that the PC card driver is normally operating on your computer (page 36). The procedure for installing the wireless LAN card drivers varies with Windows Me/98. Use the procedure applicable to your computer as shown below. Windows ME user: See <> below. Windows 98 user: See < > on page 45. 《WindowsMe》 The installed wireless LAN card is recognized and the [Add New Hardware Wizard] window appears. If the Wizard window does not appear, see "The wireless LAN card installation window does not appear." on page 96 in Chapter 5. Insert the "AirStation Driver CD" into the CD-ROM drive. ⇒ Continued on next page WLI-CF-S11G User’s Manual 43 Windows Me/98 Settings Turn on the computer. WLI-CF-S11G.book 44 ページ 2002年3月1日 金曜日 午後6時16分 When you insert the "AirStation Driver CD" into the CDROM drive, the Simple Installation Wizard window may automatically appear. In this case, click [Cancel], and then [Abort], closing the window. 1. Select [Automatic Search for a better driver (recommended)]. 2. Click [Next]. If the "Copying Files..." window appears, take the following steps before proceeding to Step 4. 1. "D:\CFS11G" (when the CD-ROM drive is "D:"). 2. Click [OK]. When the message "Windows has finished installing the new hardware device." appears, click the [Finish] button. Eject the "AirStation Driver CD" from the CD-ROM drive. When the message "Do you want to restart your computer now?" appears, click [Yes]. The computer restarts. 1. Enter your "User name" and "Password." 2. Click [OK]. The above window may not appear, but it is not a problem. The password field may be left empty. When you enter a password for the first time, the entered character string will be registered as your password. 44 WLI-CF-S11G User’s Manual WLI-CF-S11G.book 45 ページ 2002年3月1日 金曜日 午後6時16分 Since the password is case-sensitive, use great care when you enter the password. When you click [Cancel], you cannot connect to the network. Be sure to click [OK]. Now you have completed the installation of the wireless LAN card drivers. Step 41 Confirming that the installed wireless LAN card Proceed to " Step is normally operating" on page 47. 《Windows98》 If the Wizard window does not appear, see "The wireless LAN card installation window does not appear." on page 96 in Chapter 5. 1. Select [Search your best driver for your device (recommended)]. 2. Click [Next]. Insert the "AirStation Driver CD" into the CD-ROM drive. When you insert the "AirStation Driver CD" into the CDROM drive, the Simple Installation Wizard window may automatically appear. In this case, click [Cancel], and then [Abort], closing the window. WLI-CF-S11G User’s Manual 45 Windows Me/98 Settings The installed wireless LAN card is recognized and the [Add New Hardware Wizard] window appears. Click [Next]. WLI-CF-S11G.book 46 ページ 2002年3月1日 金曜日 午後6時16分 1. Select "Specify location..." 2. Enter "D:\CFS11G" (when the CD-ROM drive is "D:"). 3. Click [Next]. 1. Confirm that "BUFFALO WLI-CF-S11G Wireless LAN Adapter" is displayed. 2. Click [Next]. When the message " Please insert the disk labeled 'Windows 98 CD-ROM', and then click OK. " appears, take the following steps before proceeding to Step 6. 1 Insert the Windows 98 CD-ROM into the CD-ROM drive. Click [OK]. 2 Enter "D:\WIN98" to the "Copy files from" field (when the CDROM drive is "D:"). Click [OK]. Click [Finish] When the message "Do you want to restart your computer now?" appears, click [Yes]. The computer restarts. Enter your "User name" and "Password." Click [OK]. The above window may not appear, but it is not a problem. The password field may be left empty. 46 WLI-CF-S11G User’s Manual WLI-CF-S11G.book 47 ページ 2002年3月1日 金曜日 午後6時16分 When you enter a password for the first time, the entered character string will be registered as your password. Since the password is case-sensitive, use great care when you enter the password. When you click [Cancel], you cannot connect to the network. Be sure to click [OK]. Now you have completed the installation of the wireless LAN card drivers. Step 41 Proceed to " Step Confirming that the installed wireless LAN card is normally operating" on page 47. Step 41 Step 4 Step Confirming that the installed wireless Upon completion of the installation of the wireless LAN card drivers, confirm that the installed wireless LAN card is normally operating by using the procedure below. Right-click [My Computer] on Desktop. Click [Properties]. Click the [Device Manager] tab. Confirm that "BUFFALO WLI-CF-S11G Wireless LAN Adapter" is displayed under [Network adapters] without any error mark ("x" or "!") indicated. When "BUFFALO WLI-CF-S11G Wireless LAN Adapter" is displayed without any error mark ("x" or "!"), your wireless LAN card is normally operating. WLI-CF-S11G User’s Manual 47 Windows Me/98 Settings LAN card is normally operating WLI-CF-S11G.book 48 ページ 2002年3月1日 金曜日 午後6時16分 If no driver name is listed or an error mark ("x" or "!") is indicated Your installed wireless LAN card is not normally operating in this case. See "I want to uninstall the wireless LAN card" on page 100 in Chapter 5, and then uninstall and re-install the wireless LAN cad drivers. To make the AirStation settings Refer to the AirStation manual to make the AirStation settings. 48 WLI-CF-S11G User’s Manual WLI-CF-S11G.book 3.2 49 ページ 2002年3月1日 金曜日 午後6時16分 Preparing for Connecting to the Network Upon completion of confirming that the installed wireless LAN card is normally operating, prepare for connecting to the network. This section describes how to make the settings in the following operating environment. Use the settings on the computer to be connected to the network for reference. • • • • OS……………… WindowsMe Protocol………… TCP/IP Client…………… Microsoft Network Client Service………… File and printer sharing for Microsoft Networks For detailed information, refer to the manual provided with Windows Me/ 98 and Help file. Windows Me/98 Settings Step 5 Confirming "TCP/IP" and "Client for Microsoft Networks" For example, the procedure below applies to the Windows Me computer. Start your computer. Select [Start]-[Settings]-[Control Panel]. Double-click [Network]. Confirm that "TCP/IP" and "Client for Microsoft Networks" are displayed in the [The following network components are installed:] field of the [Configuration] window. WLI-CF-S11G User’s Manual 49 WLI-CF-S11G.book 50 ページ 2002年3月1日 金曜日 午後6時16分 When "TCP/IP" is not displayed, see Caution on page 53 to add the TCP/IP. When "Client for Microsoft Networks" is not displayed, see Caution on page 54 to add Microsoft Network Client. 《When only the wireless LAN card is installed》 Confirm that "TCP/IP" and "Client for Microsoft Networks" are listed. Confirm that "Client for Microsoft Networks" is displayed. ⇒ Continued on next page 50 WLI-CF-S11G User’s Manual WLI-CF-S11G.book 51 ページ 2002年3月1日 金曜日 午後6時16分 《When dial-up adapters and/or other LAN boards are installed》 Confirm that "TCP/IP" and "Client for Microsoft Networks"are listed. Confirm that "Client Microsoft Networks" displayed. for is "TCP/IP->BUFFALO WLI-CF-S11G Wireless LAN Adapter" 1. Select "TCP/IP." 2. Click [Properties]. Click the "IP Address" tab. Enter the IP address. Click [OK]. WLI-CF-S11G User’s Manual 51 Windows Me/98 Settings The following appears in the "The following network components are installed:" field. However, this does not imply any problem. WLI-CF-S11G.book 52 ページ 2002年3月1日 金曜日 午後6時16分 • When a DHCP server exists within the network (e.g., when the DHCP server function of the AirStation is used), select [Obtain IP Address Automatically]. • To manually set the IP address, select [Specify an IP address]. Inquire the IP address and Subnet mask from your network administrator. • For the IP address setting, see "I don't know how to assign the IP address" on page 113 in Chapter 5. When the window in Step 5 appears again, click [OK] to close the "Network" window. Click [Yes]. Windows Me will restart. Now you have completed the TCP/IP settings on the computer which will use a wireless LAN. 52 WLI-CF-S11G User’s Manual WLI-CF-S11G.book 53 ページ 2002年3月1日 金曜日 午後6時16分 If "TCP/IP" is not displayed, use the procedure below to add the TCP/IP. Click [Add]. 2. Click [Add]. Select "Microsoft" [Manufacturers]. for Select "TCP/IP" for [Network Protocols]. Click [OK]. WLI-CF-S11G User’s Manual 53 Windows Me/98 Settings 2 1. Select [Protocol]. WLI-CF-S11G.book 54 ページ 2002年3月1日 金曜日 午後6時16分 Confirm that the TCP/IP has been added. When "Client for Microsoft Networks" is not displayed, use the procedure below to add the Microsoft Network Client. Click [Add]. 54 WLI-CF-S11G User’s Manual WLI-CF-S11G.book 55 ページ 2002年3月1日 金曜日 午後6時16分 Select [Client]. Click [Add]. 3 1. Select "Microsoft" for [Manufacturers]. 2. Select "Client for Microsoft Networks" for [Network Clients]. 3. Click [OK]. WLI-CF-S11G User’s Manual 55 Windows Me/98 Settings Confirm that the Microsoft Network Client has been added. WLI-CF-S11G.book Step 6 56 ページ 2002年3月1日 金曜日 午後6時16分 Adding "File and printer sharing for Microsoft Networks" Click [File Sharing]. and Print Click the checkbox to put a checkmark for both "I want to be able to give others access to my files." and "I want to be able to allow others to print to my printer(s)." Click [OK]. 56 WLI-CF-S11G User’s Manual WLI-CF-S11G.book 57 ページ 2002年3月1日 金曜日 午後6時16分 Confirm that "File and printer sharing for Microsoft Networks" has been added. Step 7 Checking the computer name and Click the [Identification] tab. Check the [Computer name],[Workgroup],and [Computer Description]. Click [OK]. It is recommended to use alphanumeric characters for the [Computer name] and [Workgroup]. If a specific character such as a period (.) is included, the computer may fail in connecting to the network. The same workgroup name must be assigned to all the computers included in the network. ⇒ Continued on next page WLI-CF-S11G User’s Manual 57 Windows Me/98 Settings workgroup name WLI-CF-S11G.book Step 8 58 ページ 2002年3月1日 金曜日 午後6時16分 Installing Client Manager "Client Manager" is a tool for communicating with wireless LAN computers directly or via AirStation. It is necessary to install Client Manager in all wireless LAN computers. Use the procedure below to install Client Manager. Insert the "AirStation Driver CD" into the CD-ROM drive. When you insert the "AirStation Driver CD" into the CD-ROM drive, the Simple Installation Wizard window may automatically appear. In this case, proceed to Step 4. 58 WLI-CF-S11G User’s Manual WLI-CF-S11G.book 59 ページ 2002年3月1日 Double-click [My Computer] on Desktop. Double-click the CD-ROM icon( 1. Select [Install the Client Manager]. 2. Click [Next]. 金曜日 午後6時16分 ) Click [Next]. Windows Me/98 Settings Click [Next]. ⇒ Continued on next page WLI-CF-S11G User’s Manual 59 WLI-CF-S11G.book 60 ページ 2002年3月1日 金曜日 午後6時16分 Select "Client Manager" Click [Next]. Reconfirm the component to be installed. Click [Next]. Copying the files required for the installation will start. Click [Yes]. Client Manager will be registered in the Startup menu. Click [No] when you do not wish to add Client Manager to the Startup menu. 60 WLI-CF-S11G User’s Manual WLI-CF-S11G.book 61 ページ 2002年3月1日 金曜日 午後6時16分 10 Click [Finish]. Now you have completed the Client Manager installation process. To uninstall Client Manager Select [Start]-[Settings]-[Control Panel]. Double-click "Add/Remove Programs." Select "Client Manager" and click [Add/Remove]. Select "Remove" and click [Next]. When the message "Do you want to completely remove the selected application and all of its components? " appears, click [OK]. When the "InstallShield Wizard Complete" window opens, click [Finish]. 61 Windows Me/98 Settings WLI-CF-S11G User’s Manual WLI-CF-S11G.book 62 ページ 2002年3月1日 金曜日 午後6時16分 3.3 Connecting to the Network Upon completion of computer settings, you can connect your computer to the network. There are two methods for connecting the computer to the network as shown below. Step 91 -a • Communicating via AirStation Step Step 91 -b • Communicating with wireless LAN computers Step Step 9 -a Communicating via AirStation To make communications using the AirStation, set the ESS-ID using Client Manager. Select [Start]-[Programs]-[AirStation Utility]-[Client Manager]. If the icon below appears in the task tray in the lower right on the screen, you can double-click that icon to start Client Manager. or Select [File]-[Manual]. 62 WLI-CF-S11G User’s Manual WLI-CF-S11G.book 63 ページ 2002年3月1日 金曜日 午後6時16分 1. Select "11Mbps Communication over AirStation" in the "Network Mode" field. 2. Enter the AirStation ESS-ID to the "ESS-ID" field. 3. Click [OK]. The initial setting of the AirStation ESS-ID shows the last six digits of the MAC address of the AirStation plus "GROUP" (upper-case). Click [OK]. AirStation retrieval will be started. ⇒ Continued on next page WLI-CF-S11G User’s Manual 63 Windows Me/98 Settings Enter an "WEP Key" if encryption with WEP is used in the network. If the AirStation is used in the initial state, no encryption is set. Leave the area empty in this case. WLI-CF-S11G.book 64 ページ 2002年3月1日 金曜日 午後6時16分 When this window appears, the access to the AirStation is successful. When the access to the AirStation is successful, the AirStation indication turns from gray to black so that the antenna mark( ) appears. After the computer has succeeded in connecting to the AirStation, a slower data rate such as "2Mbps" may be displayed in the "Transfer speed" column. In this case, the correct data rate will appear when the practical communication starts. Step 9 -b Communicating with wireless LAN computers When communicating with wireless LAN computers, manually set a radio channel using Client Manager. Select [Start]-[Programs]-[AirStation Utility]-[Client Manager]. If the icon below appears in the task tray in the lower right on the screen, you can double-click that icon to start Client Manager. or 64 WLI-CF-S11G User’s Manual WLI-CF-S11G.book 65 ページ 2002年3月1日 金曜日 午後6時16分 Select [File]-[Manual]. Select "Peer to peer communication" in the "Network Mode" field. Click [OK]. Enter an "WEP Key" if encryption with WEP is used in the network. If the initial settings are used, no encryption is set. Leave the area empty in this case. Click [OK]. Now you have completed the radio channel configuration procedure. WLI-CF-S11G User’s Manual 65 Windows Me/98 Settings Select the same channel as the other computers that you wish to communicate WLI-CF-S11G.book Step 10 66 ページ 2002年3月1日 金曜日 午後6時16分 Making your computer shared Upon completion of wireless LAN channel configuration, make the settings for sharing the drives and folders in your computer so that any computer on the network can use them. The example here describes the procedure for sharing [My Document] in Windows Me. Double-click [My Computer] on Desktop, and then the C: drive ion. Right-click [My Documents], and select [Sharing] from the menu. Click[Shared As]. Check or change, if necessary, "Share Name," "Comment," "Access Type," and "Passwords." Click [OK]. For details on "Share Name," "Comment," "Access Type," and "Passwords," see "Setting window for sharing in Windows Me/ 98" on page 123 in Chapter 6. 66 WLI-CF-S11G User’s Manual WLI-CF-S11G.book 67 ページ 2002年3月1日 金曜日 午後6時16分 Upon completion of sharing setting, the [My Documents] icon changes as shown below. Now you have completed the setting for sharing [My Documents]. Step 11 Starting communication Upon completion of setting for sharing the drives and folders, you can access a computer on the network. Double-click [My Network] on Desktop. In Windows 98, double-click the [Network Computer] icon, and proceed to Step 4. Windows Me/98 Settings Double-click [Entire Network]. ⇒ Continued on next page WLI-CF-S11G User’s Manual 67 WLI-CF-S11G.book 68 ページ 2002年3月1日 金曜日 午後6時16分 Double-click the workgroup name icon. All computers connected on the network are listed. When your target computer is not listed, see "Other computers are not listed (during communication without the AirStation)" on page 106 in Chapter 5. Double-click the icon of your target computer. Double-click your target folder. All available folders and files in the selected folder are listed so that you can open, create, or update a file in them. All available folders and files in the selected folder are listed so that you can open, create, or update a file in them. 68 WLI-CF-S11G User’s Manual
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Encryption : Standard V1.2 (40-bit) User Access : Print, Copy, Fill forms, Extract, Assemble, Print high-res Modify Date : 2002:03:15 14:02:45+08:00 Create Date : 2002:03:14 10:46:59+09:00 Title : WLI-CF-S11G.book Author : kanatani Creator : ADOBEPS4.DRV Version 4.52 Producer : Acrobat Distiller 5.0.5 (Windows) Page Count : 38 Mod Date : 2002:03:14 10:47:15+09:00 Creation Date : 2002:03:14 10:46:59+09:00 Metadata Date : 2002:03:14 10:47:15+09:00EXIF Metadata provided by EXIF.tools