BUFFALO 09101731-0 Wireless LAN Card User Manual WLI CF S11G

BUFFALO INC. Wireless LAN Card WLI CF S11G

Users Manual Part 2

■Overview Chapter 3Capter 3WindowsMe/98SettingsThis chapter describes how to make thesettings for connecting your Windows Me/98computer to a wireless LAN.3.1 Making the Wireless LAN Card Available Step 1 Before installing the wireless LAN card ............ 34pStep 2 Installing the wireless LAN card .........................40pStep 3 Installing the wireless LAN carddrivers ................................................................... 43pStep 4 Confirming that the installed wireless LAN card is normally operating ..........................47p3.2 Preparing for Connecting to the Network Step 5 Confirming "TCP/IP" and "Client forMicrosoft Networks" ............................................ 49pStep 6 Adding "File and printer sharing forMicrosoft Networks" ............................................56pStep 7 Checking the computer name andworkgroup name .................................................. 57pStep 8 Installing Client Manager ....................................58p3.3 Connecting to the Network Step 9 -a Communicating via AirStation ........................... 62pStep 9 -b Communicating with wireless LANcomputers ............................................................ 64pStep 10 Making your computer shared ........................... 66pStep 11 Starting communication ...................................... 67pWLI-CF-S11G.book 31 ページ ２００２年３月１日　金曜日　午後６時１６分
WLI-CF-S11G User’s Manual32Follow the procedure in the illustration below to connect your Windows Me/98 computer to a wireless LAN.WindowsMe/98Operation FlowMaking the wireless LAN card availablePreparing for connecting to the networkConnecting to the networkCheck the configuration of the drives on your Windows computer and confirm that its PC card driver operates normally.Install the wireless LAN card in the Windows comput-er.Make the settings for access to the net-work.a...AirStationb...Wireless LAN computersMake the wireless LAN computer shared.Confirm that the "TCP/IP" and "Client for Micro-soft Networks" are installed.Add "File and print-er sharing for Mi-crosoft Networks."Step 1 Step 2Step 9 -a, b Step 10Step 5 Step 6（from page 62）（from page 34）（from page 49）WLI-CF-S11G.book 32 ページ ２００２年３月１日　金曜日　午後６時１６分
3Windows Me/98 SettingsWLI-CF-S11G User’s Manual 33Install the wireless LAN card drivers in the Windows comput-er.Confirm that the in-stalled wireless LAN card operates nor-mally.Communicate with other computers on the network.Check the computer name and workgroup name.Install Client Manager for communicating with other wireless LAN computers.To make the AirSta-tion settings, refer to the AirStation manual.Step 3 Step 4Step 11Step 7 Step 8WLI-CF-S11G.book 33 ページ ２００２年３月１日　金曜日　午後６時１６分
WLI-CF-S11G User’s Manual343.1 Making the Wireless LAN Card AvailableInstall the wireless LAN card to connect your Windows Me/98 computer toa wireless LAN.Step 1 Before installing the wireless LAN cardChecking the configuration of your drivesFollow the procedure below to check the configuration of the drivers onyour Windows computer in which the wireless LAN card will be installed.The following procedure uses Windows Me for example.1Turn on the computer to boot Windows.2Double-click [My Computer] on Desktop.3These displayed drive names will be necessary in the subse-quent procedures. Be sure to take note of these drive names inthe table on the upper right of the next page.Check the drive nameslisted in the window.Select [View]-[Detail].WLI-CF-S11G.book 34 ページ ２００２年３月１日　金曜日　午後６時１６分
3Windows Me/98 SettingsWLI-CF-S11G User’s Manual 35Drive names on your computerIf your computer has only one PC card slotIf the CD-ROM drive is connected via the PC card to a computer withonly one PC card slot, the CD-ROM drive and this wireless LAN cardcannot be used at the same time. Execute the following steps beforeinstalling the PC card driver.1 Connect the CD-ROM drive to the computer.2 Insert the "AirStation Driver CD" into the CD-ROM drive.3 Create a new folder (directory) on the hard disk, and copy all filesfrom the CD-ROM to that folder. When you are prompted for the "AirStation Drier CD" duringinstallation, specify the folder to which the files were copied in theabove Step 3.⇒ Continued on next pageDrive Type Icon Drive Name (e.g.)3.5" FDD （A:）HDD (local disk) （C:）CD-ROM （D:）WLI-CF-S11G.book 35 ページ ２００２年３月１日　金曜日　午後６時１６分
WLI-CF-S11G User’s Manual36Checking the PC card driverFollow the procedure below to verify that the PC card driver on the computer inwhich the wireless LAN card will be installed is operating normally.1Right-click [My Computer] on Desktop. Click [Properties].2Click the [Device Manager] tab.3Click the "+" mark on the left of [PCMCIA socket].4The displayed PCMCIA socket name varies with the computermodel.Confirm that the "x" mark is notindicated for the icon under[PCMCIA socket].WLI-CF-S11G.book 36 ページ ２００２年３月１日　金曜日　午後６時１６分
3Windows Me/98 SettingsWLI-CF-S11G User’s Manual 37If such an error mark as "!" or "x" is not indicated, the PC card driver isoperating normally.If the icon displayed under [PCMCIA socket] appears withthe ! or x mark, refer to the manual included in the computerand activate the PC card driver.Checking the browser settings (only for using the AirStation)When you use the AirStation, invalidate the dial-up settings and proxysettings under the browser settings. The following procedure uses Internet Explorer 5.0 or later for example.1Select [Start]-[Settings]-[Control Panel].2Double-click [Internet Options].3Double-click the [Connections] tab.4⇒ Continued on next pageWhen the provider informationis listed in the [Dial-upsettings] area, click the ○mark on the left side of [Neverdial a connection] below thearea to put a dot mark.Click [LAN settings] in the"Local Area Network (LAN)settings" area.WLI-CF-S11G.book 37 ページ ２００２年３月１日　金曜日　午後６時１６分
WLI-CF-S11G User’s Manual385Confirm the items with a checkmark.For memorandum, put a checkmark for the same items below.□ Automatically detect settings□ Use automatic configuration script□ Use a proxy server□ Bypass proxy server for local addresses6Upon completion of confirming the items with the checkmark,remove the checkmark from all the items.Checking the network adapterConfirm the current settings of the network function.1Select [Start]-[Settings]-[Control Panel].2Double-click [System].3With [View devices by type]selected, click the "+" markon the left side of [Networkadapters]. The currentadapters are listed.Click [Device Manager].WLI-CF-S11G.book 38 ページ ２００２年３月１日　金曜日　午後６時１６分
3Windows Me/98 SettingsWLI-CF-S11G User’s Manual 394Disable a LAN board or card if any name.If there is no LAN board or card name listed, proceed to Step 5.5If any name beginning with "AOL" is found under [DeviceManager]-[Network adapters], disable it in the same manner asStep 4.6Click [OK] to close the [Device Manager].If you have disabled any driver in Steps 4 and/or 5, restartthe computer.Put a checkmark for"Disable in this hardwareprofile."WLI-CF-S11G.book 39 ページ ２００２年３月１日　金曜日　午後６時１６分
WLI-CF-S11G User’s Manual40Step 2 Installing the wireless LAN cardThe wireless LAN card can be installed/removed in/from the computerwhich is in the ON state.If your computer is equipped with a power managementfunction that automatically cuts power supply to thecomputer when it is left idle for a certain period, turn thefunction off. The wireless LAN card may be disabled if thepower management function starts.Refer to the manual provided with the computer for detailson the power management function.Precautions for installation/removal• Be sure to handle the computer and its peripherals in such away as described in the manual of each unit.• Completely remove any dust from the connectors.• Never touch the connector portion of the wireless LAN card.• Use great care for the connector location of the wireless LANcard when installing the card in the computer. The connectormay be damaged if it is forced.• The wireless LAN card can be inserted and removed with thecomputer turned on (Hot Swap feature). However, youshould set the wireless LAN card in a safely removable stateon Windows before removing it. See "When removing thewireless LAN card" on page 42.WLI-CF-S11G.book 40 ページ ２００２年３月１日　金曜日　午後６時１６分
3Windows Me/98 SettingsWLI-CF-S11G User’s Manual 41Installing the wireless LAN card in a notebook computerFollow the instructions in the illustration below when installing the wirelessLAN card in a notebook computer.When your computer is equipped with two card slotsAs this wireless LAN card has a protruding section for thebuilt-in antenna, the upper slot may be blocked when thelower one is occupied with this card.Place this wireless LAN card in the upper slot.When inserting the wireless LAN card into the PC card slot on your computer, attach the BUFFALO's PC card adapter WLI-CF-OP available separately.WLI-CF-S11G.book 41 ページ ２００２年３月１日　金曜日　午後６時１６分
WLI-CF-S11G User’s Manual42When removing the wireless LAN cardFollow the procedure below to remove the wireless LAN card whenthe computer is running. The following procedure uses Windows MEfor example.1 Click the removal icon in the task tray, and select "StopBUFFALO WLI-CF-S11G Wireless LAN Adapter."※ The removal icon may be [ ] on Windows 98.※ The message displayed when you click the icon varies with theWindows version.※ If you cannot find the icon, see the Windows Help.2 When the message "The 'BUFFALO WLI-CF-S11G Wireless LAN Adapter' device can now be safely removed from the system." is displayed, click [OK].※ The message to be displayed varies with the Windows version.3 Remove the wireless LAN card from the computer.WLI-CF-S11G.book 42 ページ ２００２年３月１日　金曜日　午後６時１６分
3Windows Me/98 SettingsWLI-CF-S11G User’s Manual 43Step 3 Installing the wireless LAN card driversPlease check the configuration of the drives on yourcomputer (page 34) before installing the drivers.In addition, confirm that the PC card driver is normallyoperating on your computer (page 36).The procedure for installing the wireless LAN card drivers varies withWindows Me/98. Use the procedure applicable to your computer as shownbelow.Windows ME user：See <<Windows ME>> below.Windows 98 user：See <<Windows 98>> on page 45.Turn on the computer.《WindowsMe》1The installed wireless LAN card is recognized and the [Add NewHardware Wizard] window appears.If the Wizard window does not appear, see "Thewireless LAN card installation window does notappear." on page 96 in Chapter 5.2Insert the "AirStation Driver CD" into the CD-ROM drive.⇒ Continued on next pageWLI-CF-S11G.book 43 ページ ２００２年３月１日　金曜日　午後６時１６分
WLI-CF-S11G User’s Manual44When you insert the "AirStation Driver CD" into the CD-ROM drive, the Simple Installation Wizard window mayautomatically appear. In this case, click [Cancel], andthen [Abort], closing the window.31. Select [Automatic Search for a better driver (recommended)].2. Click [Next].If the "Copying Files..." window appears, take thefollowing steps before proceeding to Step 4.1. "D:\CFS11G" (when the CD-ROM drive is "D:").2. Click [OK].4When the message "Windows has finished installing the newhardware device." appears, click the [Finish] button.5Eject the "AirStation Driver CD" from the CD-ROM drive.6When the message "Do you want to restart your computer now?"appears, click [Yes].The computer restarts.71. Enter your "User name" and "Password."2. Click [OK].The above window may not appear, but it is not a problem.The password field may be left empty.When you enter a password for the first time, the entered characterstring will be registered as your password.WLI-CF-S11G.book 44 ページ ２００２年３月１日　金曜日　午後６時１６分
3Windows Me/98 SettingsWLI-CF-S11G User’s Manual 45Since the password is case-sensitive, use great care when you enter thepassword.When you click [Cancel], you cannot connect to the network. Be sureto click [OK]. Now you have completed the installation of the wireless LAN card drivers.《Windows98》1The installed wireless LAN card is recognized and the [Add NewHardware Wizard] window appears.Click [Next].If the Wizard window does not appear, see "Thewireless LAN card installation window does notappear." on page 96 in Chapter 5.21. Select [Search your best driver for your device (recommended)].2. Click [Next].3Insert the "AirStation Driver CD" into the CD-ROM drive.When you insert the "AirStation Driver CD" into the CD-ROM drive, the Simple Installation Wizard window mayautomatically appear. In this case, click [Cancel], andthen [Abort], closing the window.Proceed to " Confirming that the installed wireless LAN cardis normally operating" on page 47.Step 1Step 4WLI-CF-S11G.book 45 ページ ２００２年３月１日　金曜日　午後６時１６分
WLI-CF-S11G User’s Manual4641. Select "Specify location..."2. Enter "D:\CFS11G" (when the CD-ROM drive is "D:").3. Click [Next].51. Confirm that "BUFFALO WLI-CF-S11G Wireless LAN Adapter"is displayed.2. Click [Next].6When the message " Please insert the disk labeled 'Windows 98CD-ROM', and then click OK. " appears, take the following stepsbefore proceeding to Step 6.1Insert the Windows 98 CD-ROM into the CD-ROM drive.Click [OK].2Enter "D:\WIN98" to the "Copy files from" field (when the CD-ROM drive is "D:").Click [OK].7Click [Finish]8When the message "Do you want to restart your computer now?"appears, click [Yes].The computer restarts.9Enter your "User name" and "Password."Click [OK].The above window may not appear, but it is not a problem.The password field may be left empty.WLI-CF-S11G.book 46 ページ ２００２年３月１日　金曜日　午後６時１６分
3Windows Me/98 SettingsWLI-CF-S11G User’s Manual 47When you enter a password for the first time, the entered characterstring will be registered as your password.Since the password is case-sensitive, use great care when you enter thepassword.When you click [Cancel], you cannot connect to the network. Be sureto click [OK].Now you have completed the installation of the wireless LAN card drivers.Step 4 Confirming that the installed wirelessLAN card is normally operatingUpon completion of the installation of the wireless LAN card drivers,confirm that the installed wireless LAN card is normally operating by usingthe procedure below.1Right-click [My Computer] on Desktop.Click [Properties].2Click the [Device Manager] tab.3Confirm that "BUFFALO WLI-CF-S11G Wireless LAN Adapter" isdisplayed under [Network adapters] without any error mark ("x" or"!") indicated.When "BUFFALO WLI-CF-S11G Wireless LAN Adapter" is displayedwithout any error mark ("x" or "!"), your wireless LAN card is normallyoperating.Proceed to " Confirming that the installed wireless LAN cardis normally operating" on page 47.Step 1Step 4Step 1Step 4WLI-CF-S11G.book 47 ページ ２００２年３月１日　金曜日　午後６時１６分
WLI-CF-S11G User’s Manual48If no driver name is listed or an error mark ("x" or "!") is indicatedYour installed wireless LAN card is not normally operating in this case.See "I want to uninstall the wireless LAN card" on page 100 in Chapter 5,and then uninstall and re-install the wireless LAN cad drivers.To make the AirStation settingsRefer to the AirStation manual to make the AirStation settings.WLI-CF-S11G.book 48 ページ ２００２年３月１日　金曜日　午後６時１６分
3Windows Me/98 SettingsWLI-CF-S11G User’s Manual 493.2 Preparing for Connecting to the NetworkUpon completion of confirming that the installed wireless LAN card isnormally operating, prepare for connecting to the network.This section describes how to make the settings in the following operatingenvironment. Use the settings on the computer to be connected to thenetwork for reference.•OS……………… WindowsMe•Protocol………… TCP/IP• Client…………… Microsoft Network Client• Service………… File and printer sharing for Microsoft NetworksFor detailed information, refer to the manual provided with Windows Me/98 and Help file.Step 5 Confirming "TCP/IP" and "Client forMicrosoft Networks"For example, the procedure below applies to the Windows Me computer.1Start your computer.2Select [Start]-[Settings]-[Control Panel].3Double-click [Network].4Confirm that "TCP/IP" and "Client for Microsoft Networks" aredisplayed in the [The following network components areinstalled:] field of the [Configuration] window.WLI-CF-S11G.book 49 ページ ２００２年３月１日　金曜日　午後６時１６分
WLI-CF-S11G User’s Manual50When "TCP/IP" is not displayed, see Caution on page 53 to addthe TCP/IP.When "Client for Microsoft Networks" is not displayed, seeCaution on page 54 to add Microsoft Network Client.⇒ Continued on next page《When only the wireless LAN card is installed》Confirm that"TCP/IP" and"Client for MicrosoftNetworks" are listed.Confirm that"Client for MicrosoftNetworks"is displayed.WLI-CF-S11G.book 50 ページ ２００２年３月１日　金曜日　午後６時１６分
3Windows Me/98 SettingsWLI-CF-S11G User’s Manual 51The following appears in the "The following network components areinstalled:" field. However, this does not imply any problem."TCP/IP->BUFFALO WLI-CF-S11G Wireless LAN Adapter"51. Select "TCP/IP."2. Click [Properties].6《When dial-up adapters and/or other LAN boards are installed》Confirm that "TCP/IP" and"Client for MicrosoftNetworks"are listed.Confirm that "Client forMicrosoft Networks" isdisplayed.Click the "IP Address" tab.Enter the IP address.Click [OK].WLI-CF-S11G.book 51 ページ ２００２年３月１日　金曜日　午後６時１６分
WLI-CF-S11G User’s Manual52• When a DHCP server exists within the network (e.g., when theDHCP server function of the AirStation is used), select [Obtain IPAddress Automatically].• To manually set the IP address, select [Specify an IP address].Inquire the IP address and Subnet mask from your networkadministrator.• For the IP address setting, see "I don't know how to assign the IPaddress" on page 113 in Chapter 5.7When the window in Step 5 appears again, click [OK] to close the"Network" window.89Windows Me will restart.Now you have completed the TCP/IP settings on the computer which willuse a wireless LAN.Click [Yes].WLI-CF-S11G.book 52 ページ ２００２年３月１日　金曜日　午後６時１６分
3Windows Me/98 SettingsWLI-CF-S11G User’s Manual 53If "TCP/IP" is not displayed, use the procedure below toadd the TCP/IP.121. Select [Protocol].2. Click [Add].3Click [Add].Select "Microsoft" for[Manufacturers].Click [OK].Select "TCP/IP" for[Network Protocols]. WLI-CF-S11G.book 53 ページ ２００２年３月１日　金曜日　午後６時１６分
WLI-CF-S11G User’s Manual544 When "Client for Microsoft Networks" is notdisplayed, use the procedure below to add theMicrosoft Network Client.1Confirm that the TCP/IPhas been added.Click [Add].WLI-CF-S11G.book 54 ページ ２００２年３月１日　金曜日　午後６時１６分
3Windows Me/98 SettingsWLI-CF-S11G User’s Manual 55231. Select "Microsoft" for [Manufacturers].2. Select "Client for Microsoft Networks" for [Network Clients].3. Click [OK].4Select [Client].Click [Add].Confirm that theMicrosoft Network Clienthas been added.WLI-CF-S11G.book 55 ページ ２００２年３月１日　金曜日　午後６時１６分
WLI-CF-S11G User’s Manual56Step 6 Adding "File and printer sharing forMicrosoft Networks"12Click [File and PrintSharing].Click the checkbox to put acheckmark for both "I want tobe able to give others accessto my files." and "I want to beable to allow others to print tomy printer(s)."Click [OK].WLI-CF-S11G.book 56 ページ ２００２年３月１日　金曜日　午後６時１６分
3Windows Me/98 SettingsWLI-CF-S11G User’s Manual 573Step 7 Checking the computer name andworkgroup name1Click the [Identification] tab.Check the [Computer name],[Workgroup],and [Computer Description].Click [OK].It is recommended to use alphanumeric characters for the [Computername] and [Workgroup].If a specific character such as a period (.) is included, thecomputer may fail in connecting to the network.The same workgroup name must be assigned to all thecomputers included in the network.⇒ Continued on next pageConfirm that "File and printersharing for MicrosoftNetworks" has been added.WLI-CF-S11G.book 57 ページ ２００２年３月１日　金曜日　午後６時１６分
WLI-CF-S11G User’s Manual58Step 8 Installing Client Manager"Client Manager" is a tool for communicating with wireless LAN computersdirectly or via AirStation. It is necessary to install Client Manager in allwireless LAN computers.Use the procedure below to install Client Manager.1Insert the "AirStation Driver CD" into the CD-ROM drive.When you insert the "AirStation Driver CD" into the CD-ROMdrive, the Simple Installation Wizard window mayautomatically appear. In this case, proceed to Step 4.WLI-CF-S11G.book 58 ページ ２００２年３月１日　金曜日　午後６時１６分
3Windows Me/98 SettingsWLI-CF-S11G User’s Manual 592Double-click [My Computer] on Desktop.3Double-click the CD-ROM icon（）41. Select [Install the Client Manager].2. Click [Next].56⇒ Continued on next pageClick [Next].Click [Next].WLI-CF-S11G.book 59 ページ ２００２年３月１日　金曜日　午後６時１６分
WLI-CF-S11G User’s Manual60789Click [No] when you do not wish to add Client Manager to theStartup menu.Click [Next].Select "Client Manager"Click [Next].Copying the files required forthe installation will start.Reconfirm the component tobe installed.Click [Yes].Client Manager will beregistered in the Startupmenu.WLI-CF-S11G.book 60 ページ ２００２年３月１日　金曜日　午後６時１６分
3Windows Me/98 SettingsWLI-CF-S11G User’s Manual 6110Now you have completed the Client Manager installation process.To uninstall Client Manager1Select [Start]-[Settings]-[Control Panel].2Double-click "Add/Remove Programs."3Select "Client Manager" and click [Add/Remove].4Select "Remove" and click [Next].5When the message "Do you want to completely remove theselected application and all of its components? " appears, click[OK].6When the "InstallShield Wizard Complete" window opens, click[Finish].Click [Finish].WLI-CF-S11G.book 61 ページ ２００２年３月１日　金曜日　午後６時１６分
WLI-CF-S11G User’s Manual623.3 Connecting to the NetworkUpon completion of computer settings, you can connect your computer tothe network. There are two methods for connecting the computer to thenetwork as shown below.•Communicating via AirStation -a•Communicating with wireless LAN computers -bStep 9 -a Communicating via AirStationTo make communications using the AirStation, set the ESS-ID using ClientManager.1Select [Start]-[Programs]-[AirStation Utility]-[Client Manager].If the icon below appears in the task tray in the lower right on thescreen, you can double-click that icon to start Client Manager. or 2Step 1Step 9Step 1Step 9Select [File]-[Manual].WLI-CF-S11G.book 62 ページ ２００２年３月１日　金曜日　午後６時１６分
3Windows Me/98 SettingsWLI-CF-S11G User’s Manual 6331. Select "11Mbps Communication over AirStation" in the"Network Mode" field.2. Enter the AirStation ESS-ID to the "ESS-ID" field.3. Click [OK].The initial setting of the AirStation ESS-ID shows the last six digits ofthe MAC address of the AirStation plus "GROUP" (upper-case).4Enter an "WEP Key" if encryption with WEP is used in the network. Ifthe AirStation is used in the initial state, no encryption is set. Leave thearea empty in this case.5⇒ Continued on next pageClick [OK].AirStation retrieval will bestarted.WLI-CF-S11G.book 63 ページ ２００２年３月１日　金曜日　午後６時１６分
WLI-CF-S11G User’s Manual646When the access to the AirStation is successful, the AirStationindication turns from gray to black so that the antenna mark（）appears.After the computer has succeeded in connecting to the AirStation, aslower data rate such as "2Mbps" may be displayed in the "Transferspeed" column. In this case, the correct data rate will appear whenthe practical communication starts.Step 9 -b Communicating with wirelessLAN computersWhen communicating with wireless LAN computers, manually set a radiochannel using Client Manager.1Select [Start]-[Programs]-[AirStation Utility]-[Client Manager].If the icon below appears in the task tray in the lower right on thescreen, you can double-click that icon to start Client Manager. or When this window appears,the access to the AirStationis successful.WLI-CF-S11G.book 64 ページ ２００２年３月１日　金曜日　午後６時１６分
3Windows Me/98 SettingsWLI-CF-S11G User’s Manual 65234Now you have completed the radio channel configuration procedure.Select [File]-[Manual].Select the same channel asthe other computers thatyou wish to communicateClick [OK].Select "Peer to peercommunication" in the"Network Mode" field.Click [OK].Enter an "WEP Key" ifencryption with WEP is usedin the network. If the initialsettings are used, noencryption is set. Leave thearea empty in this case.WLI-CF-S11G.book 65 ページ ２００２年３月１日　金曜日　午後６時１６分
WLI-CF-S11G User’s Manual66Step 10 Making your computer sharedUpon completion of wireless LAN channel configuration, make the settingsfor sharing the drives and folders in your computer so that any computer onthe network can use them.The example here describes the procedure for sharing [My Document] inWindows Me.1Double-click [My Computer] on Desktop, and then the C: driveion.23For details on "Share Name," "Comment," "Access Type," and"Passwords," see "Setting window for sharing in Windows Me/98" on page 123 in Chapter 6.Right-click [My Documents],and select [Sharing] fromthe menu.Click［Shared As］.Click [OK].Check or change, ifnecessary, "Share Name,""Comment," "Access Type,"and "Passwords."WLI-CF-S11G.book 66 ページ ２００２年３月１日　金曜日　午後６時１６分
3Windows Me/98 SettingsWLI-CF-S11G User’s Manual 674Upon completion of sharing setting, the [My Documents] iconchanges as shown below.Now you have completed the setting for sharing [My Documents].Step 11 Starting communicationUpon completion of setting for sharing the drives and folders, you canaccess a computer on the network.1Double-click [My Network] on Desktop.In Windows 98, double-click the [Network Computer] icon, andproceed to Step 4.2⇒ Continued on next pageDouble-click[Entire Network].WLI-CF-S11G.book 67 ページ ２００２年３月１日　金曜日　午後６時１６分
WLI-CF-S11G User’s Manual683Double-click the workgroup name icon.All computers connected on the network are listed.When your target computer is not listed, see "Other computersare not listed (during communication without the AirStation)" onpage 106 in Chapter 5.4Double-click the icon of your target computer.5Double-click your target folder.6All available folders and files in the selected folder are listed sothat you can open, create, or update a file in them.All available folders and files in the selected folder are listed so thatyou can open, create, or update a file in them.WLI-CF-S11G.book 68 ページ ２００２年３月１日　金曜日　午後６時１６分

Navigation menu