Badger Meter ADEBT BadgerTouch/ADE Transmitter User Manual Exhibit D Users Manual per 2 1033 b3

Download:
Mirror Download [FCC.gov]
Document ID	330308
Application ID	+OeYzDKNV9HqllUS+P2fKA==
Document Description	Exhibit D Users Manual per 2 1033 b3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	5.95kB (74377 bits)
Date Submitted	2003-06-05 00:00:00
Date Available	2003-06-05 00:00:00
Creation Date	2003-05-30 13:07:44
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2003-05-30 13:07:44
Document Title	Exhibit D Users Manual per 2 1033 b3

BadgerTouchTM
Automated Meter
Reading System
Technical
Brief
BadgerTouchTM
Pit Module
DESCRIPTION
APPLICATIONS: The Badger Meter BadgerTouchTM Single Pit Module factory prewired to the Absolute Digital Encoder (ADE™), is a
complete electronically encoded close-proximity automated meter
reading system, specifically designed for single pit meter installations.
This system can be used with all Badger Meter Recordall Disc, Turbo
Series and Compound meters available today and is designed to fit pit
lid configurations up to 3 inches thick.
COMMUNICATION: Communication is accomplished by using a
Symbol® or handheld data collector to interrogate the BadgerTouch pit
module via a short range Radio Frequency (RF) signal. The pit module
responds with its serial number, water meter reading, and transmits
data in approximately 2.5 seconds. In the event a tamper condition
exists, the Symbol data collector will not receive a reading.
PERFORMANCE: The Badger Meter BadgerTouch automated meter
reading system offers superior operating performance in pit applications and is designed for totally submerged environments. The pit
module allows readings under many conditions where ice, sand, or dirt
may impede direct contact with the read pad. For consistent results,
interrogation equipment should be placed in direct contact with the
remote read pad.
METER READING VALIDATION: Further validation of the meter
reading can be made automatically by the Symbol based on comparison of high-low audit fields in the record. If the meter reading is not
between these predetermined limits, an error message is displayed on
the Symbol display.
WIRE CONNECTIONS: The BadgerTouch Single Pit Module is
factory prewired to the ADE and does not require additional wiring in
the field.
CONSTRUCTION: The Badger Meter BadgerTouch pit module is
constructed from high impact plastic material that is designed for
mounting directly through the pit lid. There is a plastic cover that locks
the pit module in place and incorporates a tamper resistant plug
feature. Inside the pit, a plastic locking nut is used to fit the module firmly
in place next to the pit lid. All electronic components internal to the
enclosure are encapsulated to provide environmental protection. The
Absolute Digital Encoder (ADE) provides permanent glass/metal
packaging in a plastic shroud and lid for long lasting, highly reliable
encoded meter reading information.
SPECIFICATIONS
Temperature:
Operating
-5° F to +120° F (-20 ° C to +49° C)
Storage
-5° F to +120° F (-20 ° C to +49° C)
Humidity
0% to 100% Condensing
Construction
High impact plastic pit lid nut, adjustment nut,
and encapsulated read coil within the plastic pit
module. The ADE is constructed of a permanently sealed glass and copper design.
Hardware
Noncorrosive tamper resistant TORX® seal
screw mounted on ADE shroud (optional seal
screw available)
Weight
15 ounces (module and ADE)
LICENSE REQUIREMENTS: This device complies with Part 15 of the
FCC Rules. Operation of this device is subject to the following two
conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation. Any changes made
by the user not approved by Badger Meter can void the user’s authority
to operate the equipment. No license is required by the utility to operate
a BadgerTouch meter reading system.
BadgerMeter,Inc.
BT-T-02
5-03
®
1.75"
Diameter
Hole
Pit Lid
.49"
3.33"
ADE Register
BadgerTouch™ Pit
Electronics
and Coil
Black Housing
3', 6', 10', 15', 25' and 75'
Cable Lengths Available
FIGURE 1. BADGERTOUCH SINGLE PIT PREWIRED CONFIGURATION
Recordall ® and RTR ® are registered trademarks of Badger Meter, Inc. TORX ® is a
registered trademark of Camcar, Division of Textron, Inc. ADE™ and BadgerTouch TM are
trademarks of Badger Meter, Inc.
Please see our website at
Due to continuous research, product improvements and enhancements,
Badger Meter reserves the right to change product or system specifications
without notice, except to the extent an outstanding bid obligation exists.
www.badgermeter.com
BadgerMeter,Inc.
for specific contacts.
Copyright © Badger Meter, Inc. 2003. All rights reserved.
®
P.O. Box 245036, Milwaukee, WI 53224-9536
(800) 876-3837 / Fax: (888) 371-5982
www.badgermeter.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Create Date                     : 2003:05:30 13:07:44-05:00
Modify Date                     : 2003:05:30 13:07:44-05:00
Page Count                      : 2
Creation Date                   : 2003:05:30 18:07:44Z
Mod Date                        : 2003:05:30 18:07:44Z
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Metadata Date                   : 2003:05:30 18:07:44Z

EXIF Metadata provided by EXIF.tools