Baicells Technologies MBS1100 LTE-TDD Base Station User Manual

Baicells Technologies Co., Ltd. LTE-TDD Base Station

User manual

User Manual for Baicells mBS1100 Base Station Product Baicells Technologies Co., Ltd. All rights reserved.
I Copyright © Baicells Technologies Co., Ltd. 2015. All rights reserved. No companies and individuals are allowed to extract or copy content (in part or whole) in this document and spread them without a written permission from Baicells. Trademark Announcement and other Baicells’ trademarks are the property of Baicells Technologies. All the other trademarks or registered trademarks are owned by their respective owners. Notes Since products, services or features are subject to Baicells’ commercial contracts or terms, all or part of the products, services or features described in this document may not in the range of your purchase or usage. Unless agreed in the contract, Baicells will not make any declaration or guarantee, expressed or implied, on contents in this document. Due to product version upgrading and other reasons, contents in this document will be subject to updating without notices. Unless agreed, this document only uses as guidance. All the statements, information and advices in this document will not constitute any expressed or implied guarantees. Baicells Technologies Co., Ltd. Address: 3F, Hui Yuan Development Building, No.1 Shangdi Information Industry Base, Haidian Dist., Beijing, China Tel: +86-10-62607100 Email: support@baicells.com Website: www.baicells.com
II Table of Contents User Manual for Baicells mBS1100 Base Station Product .................................................................................... 1 Table of Contents .................................................................................................................................................... II List of Diagrams ...................................................................................................................................................... II List of Figures ......................................................................................................................................................... II 1 Product Overview .................................................................................................................................................. 1 1.1 Product Orientation ...................................................................................................................................... 1 1.2 Product Features .......................................................................................................................................... 1 1.3 Product Description ..................................................................................................................................... 2 1.4 Product Appearance ..................................................................................................................................... 2 2 Application Scenarios ............................................................................................................................................ 3 2.1 Overview ..................................................................................................................................................... 3 3 Technical Specifications......................................................................................................................................... 4 3.1 Hardware Specifications .............................................................................................................................. 4 3.2 Software Specifications ............................................................................................................................... 5 3.3 Environment Specifications ......................................................................................................................... 6 4 Product List ............................................................................................................................................................ 6 5 Antennas Information ........................................................................................................................................... 6 6 Maximum Output Power ...................................................................................................................................... 7 List of Diagrams Diagram 1-1 Appearance of mBS1100 outdoor base station ............................................................ 2 Diagram 2-1 mBS1100 applied in outdoor wireless broadband solution ......................................... 3 List of Figures Figure 1-1 mBS1100 product description ......................................................................................... 2 Figure 1-2 Interfaces of mBS1100 outdoor base station ................................................................... 3 Figure 1-3 Function definition of mBS1100 outdoor base station indicator lights ........................... 3 Figure 3-1 Hardware specifications of mBS1100 outdoor base station ............................................ 4 Figure 3-2 Software specifications of mBS1100 outdoor base station ............................................. 5 Figure 3-3 Environment specifications of mBS1100 outdoor base station ....................................... 6 Figure 4-1 List of mBS1100 outdoor base station products ............................................................. 6
1 1 Product Overview 1.1 Product Orientation Baicells is a high-tech company dedicated in wireless broadband access solutions and service operation. With the advent of the Internet+ era, the development of WBB is imminent. Through continuous innovation, Baicells launches the world first mobile broadband system based on the Internet architecture and unlicensed spectrum. Baicells can provide a wide range of base stations, including Micro, Pico, Femto, SmartSite and other series to be applied in various scenarios, indoor and outdoor on different spectrums. mBS1100 product is adopting TD-LTE technology, designed for implementing industry broadband data access. mBS1100 can support backbone network access by way of wired or wireless backhaul to realize various data service conversion and transmission functions. mBS1100 can be deployed outdoors, and widely used by telecom operators, broadband operators; in enterprise private network, power private network, port private network, video monitoring and wireless broadband coverage in rural areas and other fields. 1.2 Product Features mBS1100 is designed according to the simplicity principle, which can evolve in a short period and realize fast customization, delivery and deployment as well. The main features of mBS1100 is as follows:  Based on 3GPP international standard TD-LTE technology; provide high speed data service; support a maximum transfer rate of DL: 110Mbit/s, UL: 20Mbit/s;  Support frequency spectrum 3.65GHz (spectrums can be customized);  Support flexible uplink and downlink time slot ratio: 0(3:1), 1(2:2), 2(1:3), realize high speed data transmission;  Support 10MHz, 20MHz operation bandwidth;  Easy to deploy and install;  Built-in DHCP Server, DNS Client and NAT function, provide a strong high speed routing ability;  Rich security service to provide timely protection against potential security risks and illegal intrusion;  Centralized network management, easy to maintain and realize automatic start after
2 installation;  Adopt Web management, convenient and simple  Small and exquisite in size, attractive and dedicate in appearance. The base station will draw people’s attention in the first sight with its outstanding industrial design, frosted shell and user friendly LED indicator light, making it easier to observe the device working condition; 1.3 Product Description mBS1100 outdoor base station product is shown in Figure 1-1: Figure 1-1 mBS1100 product description Product Description Maximum Power mBS1100 3.65G LTE TDD outdoor micro base station 2*1W 1.4 Product Appearance Diagram 1-1 Appearance of mBS1100 outdoor base station
3 Interface specifications of mBS1100 outdoor base station are shown in Figure 1-2 Figure 1-2 Interfaces of mBS1100 outdoor base station Interface Description PWR Power interface：+48V DC (+42V~+58V) LAN Gigabit Ethernet debug port (not connected) WAN Gigabit Ethernet WAN port, used for external IP backbone transmission network GPS External GPS antenna, N-Female screw(not connected) ANT1 External antenna interface 1, N-Female screw ANT2 External antenna interface 2, N-Female screw SNF External sniffer interface, N-Female screw mBS1100 outdoor base station has 3 indicators. The indicator functions are defined and described in Figure 1-3: Figure 1-3 Function definition of mBS1100 outdoor base station indicator lights Indicator Color Status Meaning PWR Green light On Base station power-on Off No power input RUN Green light On Base station operation Off No power input or power fault ALM Red light On Hardware alarm, e.g. VSWR alarm Off No alarm ACT Green light On The transmitting channel works normally (Standard: The community can build channels or the transmitting channel is open). Off The transmitting channel works abnormally (for example, the transmitting channel is closed). 2 Application Scenarios 2.1 Overview mBS1100 outdoor base stations mainly offer wireless broadband data services. mBS1100 can support LTE-TDD wireless coverage and complete a variety of voice and data services. Diagram 2-1 mBS1100 applied in outdoor wireless broadband solution
4 3 Technical Specifications 3.1 Hardware Specifications Figure 3-1 Hardware specifications of mBS1100 outdoor base station Item Description Working Mode LTE TDD Working Frequency 3650MHz~3700MHz Working Bandwidth 10MHz/20MHz External Interfaces PWR interface: 1 WAN interface Electrical Port : 1, RJ45 LAN interface: 1, RJ45 GPS interface: 1 N-Female Antenna interface: 2 N-Female SNF interface: 1 N-Female Indicator PWR 1, green light, Base station power status indicator RUN 1, green light, Base station operation status indicator ALM 1, red light, Base station alarm status indicator ACT 1, green light, transmitting channel status indicator Max Tx Power 33dBm Receiving Sensitivity 1. 10MHz: -100dBm 2. 20MHz: -97dBm Synchronization Mode Support GPS, 1588V2, OTA (same or different frequency)
5 MIMO 2*2MIMO Backhaul Mode Wired backhaul: Ethernet Installation Method Tower-mounted Antenna External high-gain antenna Power Consumption <65W 3.2 Software Specifications Figure 3-2 Software specifications of mBS1100 outdoor base station Item Description Technical Standard LTE TDD 3GPP Release 9 Business Capability 32concurrent users, 96 connection users Maximum Throughput DL: 110Mbps@20MHz UL: 20Mbps@20MHz DL: 55Mbps@10MHz UL: 7Mbps@10MHz Scheduling Mode Based on QoS scheduling Modulation Mode Support: BPSK, QPSK, 16QAM, 64QAM Voice Solution Support CSFB, VoLTE, SRVCC Traffic Offload Support LIPA/SIPTO, which is Local IP Access, Selected IP Traffic Offload for short(optional) SON Self-organizing network: support plug and play, automatic start, optimization and configuration RAN Sharing Support Network Management Interface Support TR069 interface protocol Northbound Interface Support: Web Service, Socket, FTP and other interface modes Operation & Maintenance 1. Support local maintenance 2. Support remote maintenance 3. Support online status management 4. Support performance statistics 5. Support failure management 6. Support configuration management 7. Support local or remote software upgrade and load 8. Diary 9. Support connectivity diagnosis 10. Support automatic start and configuration 11. Alarm reporting: support lower machine broken alarm, high and low temperature alarm, weak wireless signal alarm report
6 3.3 Environment Specifications Figure 3-3 Environment specifications of mBS1100 outdoor base station Item Description Temperature Working temperature: -35°C to 55°C Storage temperature: -40°C to 70°C Humidity 5%～100% Temperature Change Rate 1°C /min MTBF ≥150000 hours MTTR ≤1 hour 4 Product List Figure 4-1 List of mBS1100 outdoor base station products Accessories Quantity Notes mBS1100 1 Standard configuration, check whether the frequency is consistent with the required. Warranty 1 Standard configuration User Manual 1 Standard configuration 5 Antennas Information Following is the list of antennas certified for use. Customers can choose according to use environment of different antenna. Antenna Type Manufacturer Model Number Antenna Max Gain(dBi) External Planar Antenna Dual Pole Kenbotong Technology Co., Ltd. KBT90DP16-3338AT0 16 External Planar Antenna Dual Pole Kenbotong Technology Co., Ltd. KBT90DP14-3338AT0 14 External Planar Antenna Dual Pole Baicells Technologies Co., Ltd ANT-3G11-R-65-EDT0 11 External Planar Antenna Dual Pole Baicells Technologies Co., Ltd ANT-3G7-R-65-EDT0 7 External Omnidirectional Antenna Single Pole Kenbotong Technology Co., Ltd. TQJ-3500AC10 10 External Omnidirectional Antenna Single Pole Kenbotong Technology Co., Ltd. TQJ-3500AC7 7 External Omnidirectional Antenna Single Pole Kenbotong Technology Co., Ltd. TQJ-3500AT6A 6
7 6 Maximum Output Power The maximum output power can be set as follows: Antenna Max Gain (dBi) 10Log(Number of antennas) Channel BW (MHz) Max output power (dBm) EIRP (dBm) 16 3 10 21 40 20 24 43 14 10 23 40 20 26 43 11 10 26 40 20 29 43 7 10 30 40 20 33 43 10 10 27 40 20 30 43 7 10 30 40 20 33 43 6 10 30 39 20 33 42 FCC Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. Warning This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 50 cm between the radiator & your body.
8 IC Compliance This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 50 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter, End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Navigation menu