Baicells Technologies MBS1100 LTE-TDD Base Station User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2978994
Application ID	9Vk/ku75t5GsegJb8sQ74A==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	Yes
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	30.93kB (386576 bits)
Date Submitted	2016-05-03 00:00:00
Date Available	2016-06-01 00:00:00
Creation Date	2016-05-04 11:30:23
Document Lastmod	2016-05-04 11:30:23
Document Title	User manual
Document Author:	ZhouMingyu

User Manual for Baicells mBS1100 Base Station
Product
Baicells Technologies Co., Ltd.
All rights reserved.
Copyright © Baicells Technologies Co., Ltd. 2015. All rights reserved.
No companies and individuals are allowed to extract or copy content (in part or whole) in this
document and spread them without a written permission from Baicells.
Trademark Announcement
and other Baicells’ trademarks are the property of Baicells Technologies.
All the other trademarks or registered trademarks are owned by their respective owners.
Notes
Since products, services or features are subject to Baicells’ commercial contracts or terms, all or
part of the products, services or features described in this document may not in the range of your
purchase or usage. Unless agreed in the contract, Baicells will not make any declaration or
guarantee, expressed or implied, on contents in this document.
Due to product version upgrading and other reasons, contents in this document will be subject to
updating without notices. Unless agreed, this document only uses as guidance. All the statements,
information and advices in this document will not constitute any expressed or implied guarantees.
Baicells Technologies Co., Ltd.
Address: 3F, Hui Yuan Development Building, No.1 Shangdi Information Industry Base, Haidian
Dist., Beijing, China
Tel: +86-10-62607100
Email: support@baicells.com
Website: www.baicells.com
Table of Contents
User Manual for Baicells mBS1100 Base Station Product ....................................................................................1
Table of Contents .................................................................................................................................................... II
List of Diagrams...................................................................................................................................................... II
List of Figures ......................................................................................................................................................... II
1 Product Overview ..................................................................................................................................................1
1.1 Product Orientation ...................................................................................................................................... 1
1.2 Product Features .......................................................................................................................................... 1
1.3 Product Description ..................................................................................................................................... 2
1.4 Product Appearance ..................................................................................................................................... 2
2 Application Scenarios ............................................................................................................................................3
2.1 Overview ..................................................................................................................................................... 3
3 Technical Specifications.........................................................................................................................................4
3.1 Hardware Specifications .............................................................................................................................. 4
3.2 Software Specifications ............................................................................................................................... 5
3.3 Environment Specifications ......................................................................................................................... 6
4 Product List ............................................................................................................................................................6
5 Antennas Information ...........................................................................................................................................6
6 Maximum Output Power ......................................................................................................................................7
List of Diagrams
Diagram 1-1
Diagram 2-1
Appearance of mBS1100 outdoor base station ............................................................ 2
mBS1100 applied in outdoor wireless broadband solution ......................................... 3
List of Figures
Figure 1-1
Figure 1-2
Figure 1-3
Figure 3-1
Figure 3-2
Figure 3-3
Figure 4-1
mBS1100 product description ......................................................................................... 2
Interfaces of mBS1100 outdoor base station ................................................................... 3
Function definition of mBS1100 outdoor base station indicator lights........................... 3
Hardware specifications of mBS1100 outdoor base station ............................................ 4
Software specifications of mBS1100 outdoor base station ............................................. 5
Environment specifications of mBS1100 outdoor base station....................................... 6
List of mBS1100 outdoor base station products ............................................................. 6
II
1 Product Overview
1.1 Product Orientation
Baicells is a high-tech company dedicated in wireless broadband access solutions and
service operation. With the advent of the Internet+ era, the development of WBB is imminent.
Through continuous innovation, Baicells launches the world first mobile broadband system
based on the Internet architecture and unlicensed spectrum.
Baicells can provide a wide range of base stations, including Micro, Pico, Femto,
SmartSite and other series to be applied in various scenarios, indoor and outdoor on different
spectrums.
mBS1100 product is adopting TD-LTE technology, designed for implementing industry
broadband data access. mBS1100 can support backbone network access by way of wired or
wireless backhaul to realize various data service conversion and transmission functions.
mBS1100 can be deployed outdoors, and widely used by telecom operators, broadband
operators; in enterprise private network, power private network, port private network, video
monitoring and wireless broadband coverage in rural areas and other fields.
1.2 Product Features
mBS1100 is designed according to the simplicity principle, which can evolve in a short
period and realize fast customization, delivery and deployment as well. The main features of
mBS1100 is as follows:
 Based on 3GPP international standard TD-LTE technology; provide high speed data
service; support a maximum transfer rate of DL: 110Mbit/s, UL: 20Mbit/s;
 Support frequency spectrum 3.65GHz (spectrums can be customized);
 Support flexible uplink and downlink time slot ratio: 0(3:1), 1(2:2), 2(1:3), realize
high speed data transmission;
 Support 10MHz, 20MHz operation bandwidth;
 Easy to deploy and install;
 Built-in DHCP Server, DNS Client and NAT function, provide a strong high speed
routing ability;
 Rich security service to provide timely protection against potential security risks
and illegal intrusion;
 Centralized network management, easy to maintain and realize automatic start after
installation;
 Adopt Web management, convenient and simple
 Small and exquisite in size, attractive and dedicate in appearance. The base station
will draw people’s attention in the first sight with its outstanding industrial design,
frosted shell and user friendly LED indicator light, making it easier to observe the
device working condition;
1.3 Product Description
mBS1100 outdoor base station product is shown in Figure 1-1:
Figure 1-1
Product
mBS1100
mBS1100 product description
Description
3.65G LTE TDD outdoor micro base
station
Maximum Power
2*1W
1.4 Product Appearance
Diagram 1-1 Appearance of mBS1100 outdoor base station
Interface specifications of mBS1100 outdoor base station are shown in Figure 1-2
Figure 1-2 Interfaces of mBS1100 outdoor base station
Interface
PWR
LAN
WAN
GPS
ANT1
ANT2
SNF
Description
Power interface：+48V DC (+42V~+58V)
Gigabit Ethernet debug port (not connected)
Gigabit Ethernet WAN port, used for external IP backbone
transmission network
External GPS antenna, N-Female screw(not connected)
External antenna interface 1, N-Female screw
External antenna interface 2, N-Female screw
External sniffer interface, N-Female screw
mBS1100 outdoor base station has 3 indicators. The indicator functions are defined and
described in Figure 1-3:
Figure 1-3 Function definition of mBS1100 outdoor base station indicator lights
Indicator
PWR
RUN
ALM
Color
Status
Meaning
On
Base station power-on
Off
No power input
On
Base station operation
Off
No power input or power fault
On
Hardware alarm, e.g. VSWR alarm
Off
No alarm
The transmitting channel works normally
(Standard: The community can build
channels or the transmitting channel
is open).
The transmitting channel works
abnormally (for example, the transmitting
channel is closed).
Green light
Green light
Red light
On
ACT
Green light
Off
2 Application Scenarios
2.1 Overview
mBS1100 outdoor base stations mainly offer wireless broadband data services. mBS1100 can
support LTE-TDD wireless coverage and complete a variety of voice and data services.
Diagram 2-1
mBS1100 applied in outdoor wireless broadband solution
3 Technical Specifications
3.1 Hardware Specifications
Figure 3-1 Hardware specifications of mBS1100 outdoor base station
Item
Working Mode
Working Frequency
Working Bandwidth
External Interfaces
Indicator
Max Tx Power
Receiving Sensitivity
Synchronization Mode
Description
LTE TDD
3650MHz~3700MHz
10MHz/20MHz
PWR interface: 1
WAN interface
Electrical Port : 1, RJ45
LAN interface: 1, RJ45
GPS interface: 1 N-Female
Antenna interface: 2 N-Female
SNF interface: 1 N-Female
1, green light, Base station power
PWR
indicator
1, green light, Base station operation
RUN
indicator
1, red light, Base station alarm
ALM
indicator
1, green light, transmitting channel
ACT
indicator
33dBm
1. 10MHz: -100dBm
2. 20MHz: -97dBm
Support GPS, 1588V2, OTA (same or different
frequency)
status
status
status
status
MIMO
2*2MIMO
Backhaul Mode
Wired backhaul: Ethernet
Installation Method
Tower-mounted
Antenna
Power Consumption
External high-gain antenna
<65W
3.2 Software Specifications
Figure 3-2
Software specifications of mBS1100 outdoor base station
Item
Technical
Standard
Business
Capability
Maximum
Throughput
Scheduling
Mode
Modulation
Mode
Voice Solution
Traffic Offload
SON
RAN Sharing
Network
Management
Interface
Northbound
Interface
Operation &
Maintenance
Description
LTE TDD 3GPP Release 9
32concurrent users, 96 connection users
DL: 110Mbps@20MHz UL: 20Mbps@20MHz
DL: 55Mbps@10MHz
UL: 7Mbps@10MHz
Based on QoS scheduling
Support: BPSK, QPSK, 16QAM, 64QAM
Support CSFB, VoLTE, SRVCC
Support LIPA/SIPTO, which is Local IP Access, Selected IP
Traffic Offload for short(optional)
Self-organizing network: support plug and play, automatic start,
optimization and configuration
Support
Support TR069 interface protocol
Support: Web Service, Socket, FTP and other interface modes
1. Support local maintenance
2. Support remote maintenance
3. Support online status management
4. Support performance statistics
5. Support failure management
6. Support configuration management
7. Support local or remote software upgrade and load
8. Diary
9. Support connectivity diagnosis
10. Support automatic start and configuration
11. Alarm reporting: support lower machine broken alarm, high
and low temperature alarm, weak wireless signal alarm report
3.3 Environment Specifications
Figure 3-3
Environment specifications of mBS1100 outdoor base station
Item
Temperature
Description
Working temperature: -35°C to 55°C
Storage temperature: -40°C to 70°C
Humidity
Temperature Change Rate
5%～100%
1°C /min
MTBF
MTTR
≥150000 hours
≤1 hour
4 Product List
Figure 4-1
List of mBS1100 outdoor base station products
Accessories
mBS1100
Quantity
Notes
Standard configuration, check
whether the frequency is consistent
with the required.
Standard configuration
Standard configuration
Warranty
User Manual
5 Antennas Information
Following is the list of antennas certified for use. Customers can choose according to use
environment of different antenna.
Antenna Type
External Planar Antenna Dual
Pole
External Planar Antenna Dual
Pole
External Planar Antenna Dual
Pole
External Planar Antenna Dual
Pole
External Omnidirectional
Antenna Single Pole
External Omnidirectional
Antenna Single Pole
External Omnidirectional
Antenna Single Pole
Manufacturer
Model Number
Antenna Max
Gain(dBi)
Kenbotong Technology Co., Ltd.
KBT90DP16-3338AT0
16
Kenbotong Technology Co., Ltd.
KBT90DP14-3338AT0
14
Baicells Technologies Co., Ltd
ANT-3G11-R-65-EDT0
11
Baicells Technologies Co., Ltd
ANT-3G7-R-65-EDT0
Kenbotong Technology Co., Ltd.
TQJ-3500AC10
10
Kenbotong Technology Co., Ltd.
TQJ-3500AC7
Kenbotong Technology Co., Ltd.
TQJ-3500AT6A
6 Maximum Output Power
The maximum output power can be set as follows:
Antenna Max
Gain (dBi)
10Log(Number
of antennas)
16
14
11
10
Channel BW
(MHz)
10
20
10
20
10
20
10
20
10
20
10
20
10
20
Max output
power
(dBm)
21
24
23
26
26
29
30
33
27
30
30
33
30
33
EIRP
(dBm)
40
43
40
43
40
43
40
43
40
43
40
43
39
42
FCC Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
 Consult the dealer or an experienced radio/TV technician for help.
Warning
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 50 cm
between the radiator & your body.
IC Compliance
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not cause interference
, and (2) This device must accept any interference, including interference that may cause undesi
red operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
The antenna(s) used for this transmitter must be installed to provide a separation distance of at
least 50 cm from all persons and must not be collocated or operating in conjunction with any
other antenna or transmitter, End-Users must be provided with transmitter operation conditions
for satisfying RF exposure compliance.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 11
Language                        : zh-CN
Tagged PDF                      : Yes
Title                           : 文档标题
Author                          : ZhouMingyu
Creator                         : Microsoft® Word 2010
Create Date                     : 2016:05:04 11:30:23+08:00
Modify Date                     : 2016:05:04 11:30:23+08:00
Producer                        : Microsoft® Word 2010

EXIF Metadata provided by EXIF.tools