Barco N V PXP1501 15.6-inch Android Terminal User Manual

Barco N.V. 15.6-inch Android Terminal Users Manual

Users Manual

SAINTWAYWAYSION1/11PXP15 User InstructionVer:001
SAINTWAYWAYSION2/11Content一、 Product Description ――――――――――――――――――――――――― 3二、 Product Specifications ―――――――――――――――――――――――― 4三、 Product Appearance ――――――――――――――――――――――――― 5四、 User Instruction for each function (Android 5.1.1)――――――――――――― 8１、 Starting Up Interface ――――――――――――――――――――――――――7２、 USB Flash Disk Usage ―――――――――――――――――――――――――――7３、 SD Card Usage ―――――――――――――――――――――――――――― 8４、 Audio Play ―――――――――――――――――――――――――――――― 8５、 Video Play ―――――――――――――――――――――――――――――― 9６、 Ethernet Port Usage ――――――――――――――――――――――――――― 9７、 Touch Screen Calibration ―――――――――――――――――――――――― 10８、 WIFI――――――――――――――――――――――――――――――――――10
SAINTWAYWAYSION3/11一、Product Descriptions：◆Android 5.1 operating systems for this device;◆WIFI, Ethernet port high speed internet surfing;◆Built-in Bluetooth module, longer transfer distance and stronger signal;◆15.6-inch TFT LED backlight 16:9 1920x1080 display;◆touch control;◆Both USB Host functions;◆Double channel earphone jack, built-in 3W left and right channel speakers, with microphone input;二、Product detailed specificationSystem SpecsCPURockChip RK3288 ARM Cortex A17, Quad core 1.8GHzMemoryDDR3 2GBeMMC8GBOperating systemAndroid 5.1Basic SpecsLCD15.6’’TFT LED Backlight Resolution: 1920×1080 Brightness: 300cd/m2Touch panel15.6-inchInterfacesUSB Host×2 Earphone jack×2Microphone Built-in 6p6cEthernet port DC INRFID CameraKeyschannel +/channel -/Home/Vol+/Vol-/Power/backStart up modeauto power onAudio outputStereo speakers, water proof 8-ohm 3W x 2Power consumption≤12WWIFI module802.11a/b/g/n/acBluetooth moduleBluetooth V4.0+EDR with integrated Class 1 PA and Low Energy (BLE) supportDimension230L×150W×42D(mm)Weight3KgEnvironment SpecsWorking temperature-10℃to +40℃Storage temperature-20℃to +40℃Working humidity0% to 95%RHStorage humidity0% to 95%RH
SAINTWAYWAYSION4/11三、Description to each partMain device:2135846971010
SAINTWAYWAYSION5/11１、channel+２、channel-３、back４、home５、VOL-６、VOL+７、power８、telephone connector９、RFID card slot１０、SPEAKER１１、DC IN１２、RESET１３、Earphone jack１４、Microphone jack１５、USB HOST connector１６、Ethernet connector１７、USB HOST jack１８、6P6C jack（This interface is a prototype of the receiver, can't come to the public telephone network to use, similar to calla nurse in the hospital with the phone）1513111412181716
SAINTWAYWAYSION6/11四、Usage for Android 5.1.1 version:１、Below interface will appear when pressing Power button:２、 Usage of USB flash disk under Android 5.1.1 is similar to under standard Android OSAfter Android 5.1.1 OS starts up, plug USB flash disk into USB Host connectorThe indicator of USB flash disk flicker, wait for few seconds, the system will load the disk automaticallyAt this time, click "Explorer" icon, you will see a folder "USB" which is USB Flash Disk. click "USB" to read and write dataUSB flash disk can also be recognized before the system starts up
SAINTWAYWAYSION7/11３、 RFID usage:Click”Contactless NFC App Demo”,click”Open Reader”click "Open Reader"button, click"Connect RF Card"４、 Audio Play:Insert the earphone into the earphone jackPut a music in MP3 format in USB disk and insert the USB Disk into USB HOST slotThen play this MP3 music in Android, you will hear this music from earphone
SAINTWAYWAYSION8/11５、Video PlayPlay the video file, the method is same as playing MP3 fileClick”Video”６、 Ethernet Port UsageConnect network cable coming PXP15.click "Settings"click”More”click”Ethernet”
SAINTWAYWAYSION9/11Setting static ip７、Touch screen calibration:click "settings"click "Developer options"open"Show touches"and”Pointer location”
SAINTWAYWAYSION10 /11Click right top OK８、WIFI usage:Click “Setting”Click”WIFI”Click”ON”Click”SSID”,input passwordFCC STATEMENT
SAINTWAYWAYSION11 /111. This device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions:(1) This device may not cause harmful interference.(2) This device must accept any interference received, including interference that may cause undesiredoperation.2. Changes or modifications not expressly approved by the party responsible for compliance could voidthe user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation. If this equipment doescause harmful interference to radio or television reception, which can be determined by turning theequipment off and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.Consult the dealer or an experienced radio/TV technician for help.This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. Thisequipment should be installed and operated with minimum distance 20cm between the radiator & your bodyIC STATEMENTThis device complies with part 15 of the FCC rules and RSS-247 of Industry Canada. Operation is subject to thefollowing two conditions: (1) this device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.This device complies with part 15 of the FCC rules and RSS-247 of Industry Canada. Operation is subject to thefollowing two conditions: (1) this device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'encompromettre le fonctionnement.Cet équipement est conforme aux limites d'exposition aux rayonnements ioniques du CI établies pour unenvironnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entrele radiateur et votre corps.

Navigation menu