Barco N V PXP1501 15.6-inch Android Terminal User Manual
Barco N.V. 15.6-inch Android Terminal Users Manual
Users Manual
SAINTWAY PXP15 User Instruction Ver:001 1 / 11 WAYSION SAINTWAY Content 一、 二、 三、 四、 1、 2、 3、 4、 5、 6、 7、 8、 2 / 11 Product Description ――――――――――――――――――――――――― 3 Product Specifications ―――――――――――――――――――――――― 4 Product Appearance ――――――――――――――――――――――――― 5 User Instruction for each function (Android 5.1.1)――――――――――――― 8 Starting Up Interface ――――――――――――――――――――――――――7 USB Flash Disk Usage ―――――――――――――――――――――――――――7 SD Card Usage ―――――――――――――――――――――――――――― Audio Play ―――――――――――――――――――――――――――――― 8 Video Play ―――――――――――――――――――――――――――――― 9 Ethernet Port Usage ――――――――――――――――――――――――――― 9 Touch Screen Calibration ―――――――――――――――――――――――― 10 WIFI――――――――――――――――――――――――――――――――――10 WAYSION SAINTWAY 一、Product Descriptions: ◆ Android 5.1 operating systems for this device; ◆ WIFI, Ethernet port high speed internet surfing; ◆ Built-in Bluetooth module, longer transfer distance and stronger signal; ◆ 15.6-inch TFT LED backlight 16:9 1920x1080 display; ◆ touch control; ◆ Both USB Host functions; ◆ Double channel earphone jack, built-in 3W left and right channel speakers, with microphone input; 二、Product detailed specification Basic Specs LCD 15.6’’TFT LED Backlight Resolution: 1920×1080 Brightness: 300cd/m2 Touch panel 15.6-inch USB Host×2 Earphone jack×2 Microphone Built-in 6p6c Ethernet port DC IN Interfaces RFID Camera Keys channel +/channel -/Home/Vol+/Vol-/Power/back Start up mode auto power on Audio output Stereo speakers, water proof 8-ohm 3W x 2 Power consumption ≤12W WIFI module 802.11a/b/g/n/ac Bluetooth module Bluetooth V4.0+EDR with integrated Class 1 PA and Low Energy (BLE) support Dimension 230L×150W×42D(mm) Weight 3Kg System Specs CPU RockChip RK3288 ARM Cortex A17, Quad core 1.8GHz Memory DDR3 eMMC 8GB Operating system Android 5.1 2GB Environment Specs Working temperature -10℃ to +40℃ Storage temperature -20℃ to +40℃ Working humidity 0% to 95%RH Storage humidity 0% to 95%RH 3 / 11 WAYSION SAINTWAY 三、Description to each part Main device: 10 4 / 11 10 WAYSION SAINTWAY 16 17 18 11 12 13 14 15 1、channel+ 2、channel3、back 4、home 5、VOL6、VOL+ 7、power 8、telephone connector 9、RFID card slot 10、SPEAKER 11、DC IN 12、RESET 13、Earphone jack 14、Microphone jack 15、USB HOST connector 16、Ethernet connector 17、USB HOST jack 18、6P6C jack(This interface is a prototype of the receiver, can't come to the public telephone network to use, similar to call a nurse in the hospital with the phone) 5 / 11 WAYSION SAINTWAY 四、Usage for Android 5.1.1 version: 1、Below interface will appear when pressing Power button: 2、 Usage of USB flash disk under Android 5.1.1 is similar to under standard Android OS After Android 5.1.1 OS starts up, plug USB flash disk into USB Host connector The indicator of USB flash disk flicker, wait for few seconds, the system will load the disk automatically At this time, click "Explorer" icon, you will see a folder "USB" which is USB Flash Disk. click "USB" to read and write data 6 / 11 USB flash disk can also be recognized before the system starts up WAYSION SAINTWAY RFID usage: Click”Contactless NFC App Demo”,click”Open Reader” click "Open Reader"button, click"Connect RF Card" 3、 Audio Play: 4、 Insert the earphone into the earphone jack Put a music in MP3 format in USB disk and insert the USB Disk into USB HOST slot Then play this MP3 music in Android, you will hear this music from earphone 7 / 11 WAYSION SAINTWAY 5、Video Play Play the video file, the method is same as playing MP3 file Click”Video” 6、 Ethernet Port Usage Connect network cable coming PXP15. click "Settings" click”More” click”Ethernet” 8 / 11 WAYSION SAINTWAY Setting static ip 7、Touch screen calibration: 9 / 11 click "settings" click "Developer options" open"Show touches"and”Pointer location” WAYSION SAINTWAY Click right top OK 8、WIFI usage: Click “Setting” Click”WIFI” Click”ON” Click”SSID”,input password 10 / 11 FCC STATEMENT WAYSION SAINTWAY 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body IC STATEMENT This device complies with part 15 of the FCC rules and RSS-247 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with part 15 of the FCC rules and RSS-247 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Cet équipement est conforme aux limites d'exposition aux rayonnements ioniques du CI établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps. 11 / 11 WAYSION
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Page Count : 11 Author : wxc Comments : Company : Create Date : 2016:11:18 12:09:11+04:09 Creator : WPS Office Modify Date : 2016:11:18 12:09:11+04:09 Producer : Source Modified : D:20161118120911+04'09' Subject : Title : Trapped : falseEXIF Metadata provided by EXIF.tools