Beautiful Enterprise SFQ01 Hi Fi dock with Bluetooth wireless Audio system User Manual

Beautiful Enterprise Co., Ltd. Hi Fi dock with Bluetooth wireless Audio system

user manual

Save this manualSFQ-01 / SFQ-01W
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.Safety InformationWARNINGS:The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.DO NOT REMOVE COVER or OPEN THE CABINET.Dangerous high voltages are present inside the enclosure. No user serviceable parts inside. Leave all servicing to qualified service personnel. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer.12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.13. Unplug this apparatus during lightning storms or when unused for long periods of time.14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.15. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, shall not be placed on the apparatus.16. The mains plug is used as disconnect device and it shall remain readily operable during intended use. In order to disconnect the mains plug from the mains completely, the mains plug should be disconnected from the mains socket outlet completely.17. The batteries (battery pack & batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. IMPORTANT SAFETY INSTRUCTIONS1. Read these instructions.2. Keep these Instructions.3. Heed all Warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with dry cloth.7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.9. Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. PORTABLE CART WARNING(Symbol provided by RETAC)For compatibility between the SFQ-01 system and another device with Bluetooth technology, consult the device's documentation and dealer. In some countries, there may be restrictions on using Bluetooth devices. Check with your local authorities.Bluetooth is a registered trademark of Bluetooth SIG, IncPlease read rating label at the bottom of system for power input and other safety information.FCC and IC Information:This device complies with Part 15 of the FCC Rules and RSS-210 of the IC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:l Reorient or relocate the receiving antenna.l Increase the separation between the equipment and receiver.l Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.l Consult the dealer or an experienced radio TV technician for help.Warnings: The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and users can obtain Canadian information on RF exposure and compliance from the Canadian Representative Burnport Holdings Ltd. 72MT Belcher Pls, East, Calgary, Alberta, T2Z 2G1, CANADA. Tel: 403-257-4961FCC&IC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the exemption from the routine evaluation limits in section 2.5 of RSS 102.1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters from user and bystanders..1. .2.
Getting Started Package Contents Installing/Replacing the Batteries Connecting the AC Adapter Using the Remote Control System Overview Front Panel Back Panel Remote Control Selecting the Sound Source Playing back from iPhone/iPod Setting an iPhone/iPod on the Unit Listening to an iPhone/iPod Charging an iPhone/iPod (For SFQ-01 Model ONLY) Playing back via Bluetooth(For SFQ-01W Model ONLY) Playing back from 2.4G Wireless AudioBuilding a 2.4G Wireless ConnectionExpanding the System in Multiple Rooms Upgrading Wireless Connection ModeListening to Tuner Listening to a Station Presetting a Station Playing back from External Source Listening to the External Audio Device, Digital Music Player orAny Other Audio SourceActivating "U-Cubed" Sound Effect Troubleshooting Technical Specifications 55567888991010101112131314141515161616171718Contents.3. .4.CAUTION - Proper VentilationTo avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows:Front: No obstructions and open spacing.Sides / Top / Back: No obstructions should be placed in the areas shown by the dimensions below.Bottom: Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of 10 cm (3-15/16") or more.15cm(5-15/16")15cm(5-15/16")15cm(5-15/16")Front View:15cm(5-15/16")15cm(5-15/16")Side View:10 cm (3- 15 /16 ")Front side Back sideQDID: B016948CAUTION - Proper Installationl Install the system in a place which is level, dry and neither too hot nor too cold. The appropriate temperature is between 5 oC and 35 oC.l Install the system in a location with adequate ventilation to prevent internal heat from building up inside the unit.l Leave sufficient distance between the system and TV.l Keep the system away from TV to avoid interference with TV.
Package ContentsExamine whether the following package contents are all included :.5. .6.Warning - When Using the Batteryl Store the battery in a place where children cannot reach. If a child accidentally swallows the battery, consult a doctor immediately.l Do not recharge, short circuit, disassemble, heat the battery, or dispose the battery in fire. Doing any of these things may cause the battery to give off heat, crack, or start a fire.l Do not leave the battery with other metallic materials. Doing this may cause the battery to give off heat, crack, or start a fire.l When throwing away or saving the battery, wrap it in tape and insulate; otherwise, the battery may start to give off heat, crack, or start a fire.l Do not poke the battery with tweezers or similar tools. Doing this may cause the battery to give off heat, crack, or start a fire.l Dispose of battery in the proper manner, according to federal, state, and local regulations.l The batteries (battery pack or batteries installed) shall not be exposed to excessive heat source such as sunshine, fire or the like.l This product contains a CR Coin Cell Lithium Battery that contains Perchlorate Material, so that special handling may apply.1. Insert the switch power adapter into 18V DC IN .2. Insert one end of the adapter cable into the end of the switch power adapter and the other end into an electrical outlet only after all other connections are completed.Connecting the AC AdapterWARNING! For optimal performance, use only the supplied AC adapter.l Ensure that power supply outlet matches with the unit AC's input 100-240V~, 50/60Hz before connection.Main Unit Remote ControlFM AntennaAdapter Cable(Included with SFQ-01W only) Switch Power AdapterGetting StartedUSB Dongle +C 20253VRl It is loaded on the remote control at the factory.l For iPhone and iPod Touch User ManualDock Adapters(2)Lithium Coin BatteryCR2025Installing/Replacing the BatteriesCAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. 1. Squeeze and pull to release the battery cover latch. You can remove the battery door with your fingernails by using the spaces set back in wall.2. Match the polarity on the Lithium Cell with a plus sign (+) on the battery tray.3. Slide the tray with new battery into the battery compartment until you hear a click sound.12Squeeze Pull +C 20253VRHandling the Remote Controll To avoid possible failure, read the following instructions and handle the remote control properly.l Do not drop or cause impact to the remote control.l Do not spill water or any liquid on the remote control.l Do not place the remote control on a wet object.l Do not place the remote control under the direct sunlight or near sources of excessive heat.Note: If you are not going to use the remote control for a long time, remove the battery to avoid any damage that may be caused by leakage and corrosion.
Hold the button to fast-backward/fast-forward a track. Decrease/increase the frequency or select a preset channel number (from 01 to 20) in tuner mode.10. (Play/Pause) buttonIn iPhone/iPod and wireless audio modes, press to play or pause a track. Note: When the unit is building a wireless audio connection with an iPad, this button is disabled.Saves a radio channel in tuner mode. 11. (Power on/off ) button Switch between standby and power-on modes.12. PAIR buttonBuild a wireless audio connection with an external device.13. LCD display14. DC IN jackConnect the supplied switch power adapter.15. AUX IN jackConnect external equipment to this jack.16. FM.ANT (Antenna) jack17. Receiver storage compartment .7. .8.System OverviewFront View Back View1. U-Cubed knob Turn to activate or deactivate the U-Cubed (High Definition Wide Stereo) sound effect.2. Bass knobTurn to adjust a desired bass effect ranged from +3 to -3.3. Treble knob Turn to adjust a desired treble effect ranged from +3 to -3.4. 30-pin Apple connector Connect with iPhone/iPod.5. Pair indicatorTo indicate when building a wireless audio connection.6. Source buttonSelect iPod, tuner, AUX or wireless audio mode by pressing repeatedly. 7. Mute buttonTurn off the sound. Press again to restore the sound output. 8. Vol +/- buttonPress to increase (+) or decrease (-) the volume level from 0 to 30. 9. (Previous) / (Next) buttonSkip to the previous/next track in iPhone/ iPod and wireless audio modes. 1714 15 16Using the Remote ControlUsing the remote controll Remove the insulation sheet before using for the first time. l Aim the remote control at the IR Sensor on the front lens within an approximate distance of 7m (23 feet) away.IR SensorStoring the remote controlA remote control storage compartment is designed on the right side of system. The remote control can be magnetized into the compartment easily for your quick and convenient use.541 2 3610711812913Push here.Open the door.Remote control magnet
1. (Power) buttonSwitch between power-on and standby modes.2. (Previous) / (Next) buttonSkip to the previous/next track in iPhone/ iPod and wireless audio modes. Hold the button to fast-backward/fast-forward a track. Decrease/increase the frequency or select a preset channel number (from 01 to 20) in tuner mode.3. (Play/Pause) buttonPlay/pause a track when listening to iPhone/ iPod or wireless audio source. Hold to switch the iPod to sleep mode. Note: When the unit is building a wireless audio with an iPad, this button is disabled. Save a radio channel in tuner mode.4. SOURCE buttonSelect iPod, tuner, AUX or wireless audio mode by pressing repeatedly.5. MUTE buttonTurn off the sound. Press again to restore the sound output. 6. U-Cubed buttonActivate or deactives U-Cubed (High Definition Wide Stereo) sound effect.7. VOL +/- buttonPress to increase (+) or decrease (-) the volume level from 0 to 30. .9.Remote Control.10.orSelecting the Sound SourceOn the Unit On the Remote ControlThis system enables you to access one of the four basic functions - iPod, tuner, AUX and wireless audio.Press SOURCE button on the unit or remote control to select one of the sound sources.Playing back from iPhone/iPod2364751Setting an iPhone/iPod on the Unitl Compatible iPod Players: Most Apple iPod models with 30-pin dock connectors as follows: iPod nano 5th generation (video camera), iPod nano 4th generation (video), iPod nano 3rd generation (video), iPod nano 2nd generation (aluminum), iPod nano 1st generation, iPod 4th generation (color display), iPhone 3GS, iPhone 3G, iPod classic, iPod 5th generation (video), iPod 4th generation, iPod touch 1st generation, iPod touch 2nd generation, iPhone, iPod mini. 1. Select the appropriate dock adapter made for your iPhone/iPod.l Use one of the supplied dock adapters or your own from the Apple Inc.l An identification number is marked on the dock adapter.iPod TouchiPhone 4/8/16GB1412Identification Number iPod Models SupportedSupplied Dock adapterl It is recommended to use an appropriate dock adapter to protect your iPhone/iPod.2. Insert the dock adapter as illustrated. The small slot at the dock adapter should be at the backside.a. Match the dock adapter tabs to the front holes in the cradle.b. Press the other side onto the cradle until a click sound.aRemove the iPod dock adapter with your fingernail by using the slot.3. Connect your iPhone/iPod. Make sure the connector plug of unit is firmly inserted into the connector port of iPhone/iPod. Notes:l Always set volume to the minimum when connecting or disconnecting the other equipment.l When you connect your iPhone/iPod to unit, make sure you insert it all the way.bSlot*Listening to an iPhone/iPod1. Press the " " button to power on the system from standby mode.2. Select "iPod" mode with the SOURCE button.3. When iPhone/iPod is selected as the sound source, it automatically starts playback.LCD DisplayLCD Display
.11.Press the Button FunctionsUnit Remote ControlNext track/fast forward (press and hold). Previous track/rewind (press and hold)./Notes for Caring Your iPhone/iPod:l iPod is a trademark of Apple Inc., registered in the U.S. and other countries.l iPhone is a trademark of Apple Inc.l We are not responsible for any loss of or damage to iPhone/iPod that might result from the use of this product.l Sound distortion may occur when playing back audio sources with high recording levels. When distortion occurs, it is recommended to turn off the equalizer of the iPhone/iPod. For information on operating the iPhone/iPod, see the iPhone/iPod instruction manual.l If you do not turn on the power of this unit and only connect the iPhone/iPod to this unit, power may be supplied to the iPhone/iPod.l "Made for iPod" and "Made for iPhone" and "Made for iPad" mean that an electronic accessory has been designed to connect specifically to iPod/iPhone/iPad and has been certified by the developer to meet Apple performance standards.l Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.Charging an iPhone/iPodThe iPhone/iPod is charged while it is set on the unit when the unit is powered on.l The unit does not support iPod 3G (10/15/20/ 30/40GB) charging mode. l Make sure the AC adapter is connected to the unit. l The iPhone/iPod is charged regardless of the sound source selected on the unit.l See the iPhone/iPod instruction manual about the details of iPhone/iPod charging. l The connector plug is protected with a cover when it is first purchased. Please remove the cover before operating the unit. l This unit can only play the iPhone/iPod audio. You can use the iPhone/iPod video function and hear the audio but cannot play the video.l Do not carry the System with iPhone/iPod connected. You might drop it down or it might cause damages to the connector part.l Do not touch or hit the iPhone/iPod terminal pins or the connector pins directly. It might cause damages to the connector part.l If the iPhone/iPod does not play correctly, please update your iPhone/iPod software to the latest version. - For details about updating your iPhone/iPod, check on the Apple web site <http://www.apple.com>.Start/Pause playback. Hold this button to switch the iPod to sleep mode..12.Notes:l A "receiver" was set in the receiver storage compartment at the factory.l The Bluetooth connection can be completed in standby mode or power-on mode.l If your mobile phone supports A2DP protocol, its music will play through the unit.l You can build a Bluetooth connection with a mobile phone, an iPad or any other Bluetooth-enabled devices.1. Press the " " button to power on the system from standby mode. l The pair indicator lights up when the unit is powered on from the standby mode.2. Press the PAIR button on the unit to put the unit into the pair mode.l The Pair indicator starts blinking at a fast rate.l If the unit has previously linked with your Bluetooth-enabled device, you only need to turn on the unit and select the Bluetooth mode, no further operation is needed. The Pair indicator will blink at a lower rate. .l If you hold the PAIR button during the process of pairing, the operation will be cancelled. 3. During this period, you can operate the mobile phone, iPad or Bluetooth-enabled device to pair with the unit within a 33 feet (10m) range.l Please check the user manual of the iPad or Bluetooth-enabled device with which you are initiating pair to learn about Bluetooth connection with any other devices. 4. Once the unit is detected and its name "Sound Platform" appears on the display of your iPad or Bluetooth-enabled device, key in the default password "1234" if a prompt requests it.l You may change the device name on your Bluetooth-enabled device after the pair is successfully set up.l The pair indicator starts blinking quickly to indicate that the unit and your device have put into the connection mode.l When a Bluetooth connection is established successfully, the indicator starts blinking slowly.l If the Bluetooth connection is completed in the Bluetooth display, and a prompt chime will sound.5. Select Bluetooth mode by repeatedly pressing the SOURCE button on the unit or remote control.6. Select the desired music and press "Play" button on your device. The unit automatically starts playing the audio.l Try again above steps 2 to 5 if the Pair indicator on the unit lights solidly. PAIR ButtonMain UnitPlaying back via BluetoothFor SFQ-01 Model ONLYDownloading the SoundFreaq App We have developed an App to give you full control from your iPhone/iPad while playing audio over the Bluetooth wireless connection, please visit the iTunes App store and download the "SoundFreaq Remote" App for FREE.After you build a Bluetooth connection between your iPhone/iPad and the Sound Platform, a prompt will be displayed on your iPhone/ iPad asking you if you would like to download our App, click "Yes" to download.You can click "No" to choose not to download the App and still play music via the Bluetooth connection but you will have limited control, we suggest you download the App.
.13. .14.Upgrading Wireless Connection ModeFor SFQ-01 user, you can purchase a 2.4G wireless receiver to upgrade the connection mode by replacing the receiver located in the storage compartment on the back of unit. For SFQ-01W user, you can purchase a Bluetooth receiver to upgrade the connection mode by replacing the receiver located in the storage compartment on the back of unit. If you have any question, please consult your dealer. 1. Open the cover of receiver storage compartment located on the back of unit.2. Remove the "receiver" from the storage compartment. l Make sure the new "receiver" is well connected to the system.4. Close the "receiver" storage cover.3. Set a new "receiver" into the storage compartment as shown.DO NOT REMOVE RECEIVER UNLESS YOU ARE UPGRADING WIRELESS CONNECTION MODE. PLEASE VISIT SOUNDFREAQ.COM FOR FURTHER DETAILS."THIS SIDE UP" is marked on the receiver. l When a 2.4G wireless connection is established successfully, the indicator starts blinking slowly.6. Select the desired music and press "Play" button on your device. The system starts playing the audio automatically.l Try again above step 5 if the Pair indicator on the unit lights solidly. Unit Unit UnitSimilar to the pair method of "Building a 2.4G Wireless Connection", each time you pair the USB dongle with a new joining unit, you need to hold the "Pair" buttons on the dongle and unit at the same time until the link is established. Select your desired audio source to play, all the units you paired will sound at the same time. USB DongleUp to 8Expanding the System in Multiple RoomsTo expand your listening areas in other rooms, install additional units (sold separately) possibly in bedroom, kitchen and garage, or on the patio as you prefer.A single USB dongle can be connected by up to 8 units simultaneously.Playing back from 2.4G Wireless AudioBuilding a 2.4G Wireless ConnectionNotes:l A "receiver" was set in the receiver storage compartment at the factory.l The 2.4G wireless connection can be completed in standby mode or power-on mode.1. Press the " " button to power on the system from standby mode. 2. Plug the supplied USB dongle into your device. (for example, your computer)l Make sure the supplied USB dongle is well connected to your device. l The pair indicator lights up when the unit is powered on from the standby mode.3. Launch the music player software if you build a link with a computer.4. Select 2.4G wireless sound source by repeatedly pressing the SOURCE button on the unit or remote control.l The pair indicator is solid on before the connection is built successfully5. Press the PAIR button on the front panel and the "Pair" button on the dongle at the same time until the link is established.l The pair indicator stars blinking quickly to indicate that the system and your device have put into the connection mode.Supplied DongleDongleComputerPair buttonPair indicatorBlinkingBlinkingLCD DisplayPair ButtonPAIR ButtonUSB DongleMain UnitFor SFQ-01W Model ONLY
.15. .16.B. Auto Scanning - Hold " "/ " " button until the frequency display starts flashing. The frequency will be scanned automatically until a station is found. 4. Hold " " button to start storing a station.l The channel number shows on the display.5. Use " "/ " " on the unit or remote control to select the channel number (from 01 to 20) to be set.6. Press " " button again to store the frequency. The selected frequency will then be stored with the preset channel number. The display will be switched automatically to channel number display after a few seconds.2. Press the " " button to power on the system from standby mode.3. Select tuner mode with the SOURCE button.4. Select a desired radio station for listening.5. Move the antenna around to get the best reception.6. If necessary, adjust the volume level.1. Select tuner mode with the SOURCE button.2. Switch to the frequency display if the display is channel number. 3. Tune a desired frequency. You can use either of the below methods to tune the frequency.A. Manual Tuning - Briefly press " "/ " " button repeatedly to move frequency to frequency (from 87.5 MHz to 108.0 MHz) until you find the desired station. Listening to TunerListening to a StationNote: Position the antenna as far away as possible from the AC adapter, a TV, or other radiation source.1. Plug the supplied FM antenna into the FM.ANT jack located on the back of unit.Press the Button FunctionsUnit Remote Control/l Hold this button to enter saving mode. Press to save a channel. (see "Presetting a station”)l Switch between the frequency display and channel number display.Tune the desired frequency or channel number based on the different display.l Select a channel (from 01 to 20).Presetting a StationChange frequency from 87.5MHz to 108.0MHz in FM mode.l Hold for more than one second to activate the Auto Scan function, and then release the button. The frequency will be scanned automatically until a radio station is found. Or press again to quit search while searching.LCD DisplayLCD DisplayLCD DisplayLCD DisplayLCD DisplayLCD DisplayFM AntennaFrequency display Channel number display1. Turn the unit power on.2. Set the volume to the minimum position.3. Select AUX mode with the SOURCE button.4. Start playback on the external device.5. Adjust the volume level to the level that you want to listen to. Note: Volume level will be shown on the display in the process of adjustment.Playing back from External SourceListening to an External Audio Device, Digital Music Player or Any Other Audio SourceConnect an external device to the AUX IN jack on the back panel of the unit using a stereo mini plug cord (not supplied).Back PanelTo audio output such as CD/MD/ digital music player, etc.
.17. .18.External DC IN (for AC adapter), AUX INDC 18 V 3.3 A (External DC IN)Input: AC 100-240V, 50/60HzOutput: DC 18 V 3.3 A 320mm (W) * 168mm (H) * 154mm (D)2.01Kg (including receiver) ModelTypeSupport BluetoothSupport ProfileBluetooth 1.2 and 2.0 compliantSound PlatformA2DPInput Sensitivity/Impedance AUX Input 1200 mVTunerBandTuning RangeFrequency StepPreset StationsAudio Output Speaker 4 ohmsInput TerminalPower SourceAC AdapterDimensions (Approx.)WeightTechnical SpecificationsSFQ-01/SFQ-01W FM 87.5 ~ 108.0 MHz 100 KHz 20 TroubleshootingIn These Cases Check the following pointsCheck this list for a possible troubleshooting solution before calling for service.• Is the AC adapter plug firmly inserted into DC IN jack of the unit? • Is the selected dock adapter compatible to your iPhone/iPod?• Is the dock adapter properly mounted on the unit? Make sure to mount the dock adapter properly.• AC adapter is not inserted securely. Plug in securely.• Is the connector plug of the unit firmly inserted into the connector port of the iPhone/iPod?• Is the iPhone/iPod properly functioning? Test the iPhone/iPod functions in stand-alone condition.• Is the connector plug of the unit firmly inserted into the connector port of the iPhone/iPod? • The path between the remote control and the sensor on the unit is blocked.• The battery of remote control is exhausted.• Remove and reconnect the AC power plug and turn on the system again.Hard to listen to broadcasts because of noise.No sound output.• The antenna is not properly extended or positioned.• Tune to the correct radio channel/frequency.• Making sure the antenna is further away from any equipment that may be causing the noise or interference.Cannot set the iPhone/iPod. Power does not come on. Cannot operate iPhone/iPod. iPhone/iPod cannot be charged.The system does not react when the buttons are pressed. Unable to operate theSystem from the remote control.• Check if the volume level is set to the minimum.• Check if the volume level is muted. Press MUTE button on the unit again to restore the sound output. Activating "U-Cubed" Sound Effect "U-Cubed" is an proprietary technology designed to create an ultra wide stereo sound field in digital music systems. With exceptional natural sound reproduction of high definition and fidelity, we create a listening experience where you feel like your speakers are separated much more than they are.To activate UQ3 on:l The unit, turn the " " knob once to activate, turn again to deactivate.l On the remote or remote App, press the " " button to activate and deactivateNotes:l The bass and treble cannot be adjusted when UQ3 is activated.l In tuner mode, the U-Cubed sound effect can not be activated.

Navigation menu