Beautiful Enterprise SFQ01 Hi Fi dock with Bluetooth wireless Audio system User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1316703
Application ID	AeFfBqdJZWCRCjSzNuot3Q==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	185.31kB (2316319 bits)
Date Submitted	2010-07-23 00:00:00
Date Available	2011-01-21 00:00:00
Creation Date	2010-06-18 13:35:37
Producing Software	Foxit PDF Creator Version 2.0.0 build 0725
Document Lastmod	2010-07-22 14:58:11
Document Title	D:\Products form 2010\SFQ_1\11 User Manuals\Manual Cover a.cdr
Document Creator	C:\Corel\Graphics8\Programs\coreldrw.exe
Document Author:	scarlett

SFQ-01 / SFQ-01W
Save this manual
Safety Information
10. Protect the power cord from being walked
on or pinched particularly at plugs, convenience
receptacles, and the point where they exit
from the apparatus.
11. Only use attachments/accessories specified
by the manufacturer.
12. Use only with the cart, stand, tripod, bracket
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
The lightning flash with arrowhead symbol,
within an equilateral triangle is intended to
alert the user to the presence of uninsulated
"dangerous voltage" within the product's
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
FCC and IC Information:
This device complies with Part 15 of the FCC
Rules and RSS-210 of the IC Rules. Operation is
subject to the following two conditions: (1) This
device may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may cause
undesired operation.
Warnings: The device meets the exemption
from the routine evaluation limits in section 2.5
of RSS 102 and users can obtain Canadian
information on RF exposure and compliance
from the Canadian Representative Burnport
Holdings Ltd. 72MT Belcher Pls, East, Calgary,
Alberta, T2Z 2G1, CANADA. Tel: 403-257-4961
Warning: Changes or modifications to this unit
not expressly approved by the party responsible
for compliance could void the user's authority to
operate the equipment.
FCC&IC Radiation Exposure Statement
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment and meets the exemption from
the routine evaluation limits in section 2.5 of
RSS 102.
WARNINGS:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
DO NOT REMOVE COVER or OPEN THE CABINET.
Dangerous high voltages are present inside the enclosure.
No user serviceable parts inside. Leave all servicing to
qualified service personnel.
PORTABLE CART WARNING
(Symbol provided by RETAC)
13. Unplug this apparatus during lightning
storms or when unused for long periods of
time.
14. Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as power-supply cord or plug is damaged,
liquid has been spilled or objects have
fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not
operate normally, or has been dropped.
15. Apparatus shall not be exposed to dripping
or splashing and no objects filled with liquids,
shall not be placed on the apparatus.
16. The mains plug is used as disconnect device
and it shall remain readily operable during
intended use. In order to disconnect the
mains plug from the mains completely, the
mains plug should be disconnected from
the mains socket outlet completely.
17. The batteries (battery pack & batteries installed)
shall not be exposed to excessive heat such
as sunshine, fire or the like.
IMPORTANT SAFETY INSTRUCTIONS
1.
2.
3.
4.
5.
6.
7.
Read these instructions.
Keep these Instructions.
Heed all Warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install
in accordance with the manufacturer's
instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9. Do not defeat the safety purpose of the
polarized or grounding - type plug. A polarized
plug has two blades with one wider than
the other. A grounding type plug has two
blades and a third grounding prong. The
wide blade or the third prong is provided for
your safety. If the provided plug does not fit
into your outlet, consult an electrician for
replacement of the obsolete outlet.
.1.
Note: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful interference
in a residential installation. This equipment
generates, uses, and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
1. This Transmitter must not be co-located or
operating in conjunction with any other
antenna or transmitter.
2. This equipment complies with FCC RF
radiation exposure limits set forth for an
uncontrolled environment. This equipment
should be installed and operated with a
minimum distance of 20 centimeters from
user and bystanders.
For compatibility between the SFQ-01 system
and another device with Bluetooth technology,
consult the device's documentation and dealer.
In some countries, there may be restrictions on
using Bluetooth devices. Check with your local
authorities.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
Consult the dealer or an experienced radio TV
technician for help.
Bluetooth is a registered trademark of Bluetooth
SIG, Inc
Please read rating label at the bottom of system
for power input and other safety information.
.2.
Side View:
CAUTION - Proper Installation
Install the system in a place which is level, dry
and neither too hot nor too cold. The appropriate
temperature is between 5 oC and 35 oC.
Install the system in a location with adequate
ventilation to prevent internal heat from
building up inside the unit.
Leave sufficient distance between the system
and TV.
Keep the system away from TV to avoid
interference with TV.
Contents
15cm
(5-15/16")
Front side
Back side
15cm
(5-15/16")
10 cm (3- 15 /16 ")
CAUTION - Proper Ventilation
QDID: B016948
To avoid risk of electric shock and fire, and to
prevent damage, locate the apparatus as
follows:
Getting Started
Package Contents
Installing/Replacing the Batteries
Connecting the AC Adapter
Using the Remote Control
System Overview
Front Panel
Back Panel
Remote Control
Selecting the Sound Source
Playing back from iPhone/iPod
10
Front: No obstructions and open spacing.
Setting an iPhone/iPod on the Unit
10
Sides / Top / Back: No obstructions should be
placed in the areas shown by the dimensions
below.
Listening to an iPhone/iPod
Charging an iPhone/iPod
10
(For SFQ-01 Model ONLY) Playing back via Bluetooth
12
(For SFQ-01W Model ONLY) Playing back from 2.4G Wireless Audio
13
Building a 2.4G Wireless Connection
13
Expanding the System in Multiple Rooms
14
Upgrading Wireless Connection Mode
14
Listening to Tuner
15
Listening to a Station
Presetting a Station
15
Playing back from External Source
16
Listening to the External Audio Device, Digital Music Player or
Any Other Audio Source
16
Activating "U-Cubed" Sound Effect
17
Troubleshooting
17
Technical Specifications
18
Bottom: Place on the level surface. Maintain an
adequate air path for ventilation by placing on a
stand with a height of 10 cm (3-15/16") or more.
Front View:
15cm
(5-15/16")
15cm
(5-15/16")
15cm
(5-15/16")
.3.
11
16
.4.
Getting Started
Warning - When Using the Battery
l Store the battery in a place where children
cannot reach. If a child accidentally swallows
the battery, consult a doctor immediately.
Package Contents
Examine whether the following package contents are all included :
CR2025
3V
Lithium Coin Battery
CR2025
Remote Control
Main Unit
Adapter Cable
It is loaded on the remote
control at the factory.
FM Antenna
USB Dongle
(Included with
SFQ-01W only)
Switch Power Adapter
Dock Adapters(2)
For iPhone and iPod Touch
User Manual
Installing/Replacing the Batteries
CAUTION: Danger of explosion if battery is
incorrectly replaced. Replace only with the
same or equivalent type.
Handling the Remote Control
1. Squeeze and pull to release the battery cover
latch. You can remove the battery door with
your fingernails by using the spaces set back
in wall.
2. Match the polarity on the Lithium Cell with a
plus sign (+) on the battery tray.
2 Pull
1 Squeeze
Do not recharge, short circuit, disassemble,
heat the battery, or dispose the battery in
fire. Doing any of these things may cause the
battery to give off heat, crack, or start a fire.
Do not leave the battery with other metallic
materials. Doing this may cause the battery
to give off heat, crack, or start a fire.
When throwing away or saving the battery,
wrap it in tape and insulate; otherwise, the
battery may start to give off heat, crack, or
start a fire.
Dispose of battery in the proper manner,
according to federal, state, and local
regulations.
The batteries (battery pack or batteries
installed) shall not be exposed to excessive
heat source such as sunshine, fire or the like.
This product contains a CR Coin Cell Lithium
Battery that contains Perchlorate Material, so
that special handling may apply.
Connecting the AC Adapter
1. Insert the switch power adapter into 18V DC
IN
2. Insert one end of the adapter cable into the
end of the switch power adapter and the
other end into an electrical outlet only after
all other connections are completed.
WARNING! For optimal performance, use only
the supplied AC adapter.
l Ensure that power supply outlet matches with
the unit AC's input 100-240V~, 50/60Hz
before connection.
To avoid possible failure, read the following
instructions and handle the remote control
properly.
Do not drop or cause impact to the remote
control.
Do not spill water or any liquid on the remote
control.
Do not place the remote control on a wet
object.
Do not place the remote control under the
direct sunlight or near sources of excessive
heat.
CR2025
3V
.5.
Do not poke the battery with tweezers or
similar tools. Doing this may cause the
battery to give off heat, crack, or start a fire.
Note: If you are not going to use the remote
control for a long time, remove the battery to
avoid any damage that may be caused by
leakage and corrosion.
3. Slide the tray with new battery into the
battery compartment until you hear a click
sound.
.6.
System Overview
Using the Remote Control
Front View
Storing the remote control
Using the remote control
Remove the insulation sheet before using for
the first time.
Aim the remote control at the IR Sensor on
the front lens within an approximate
distance of 7m (23 feet) away.
Back View
A remote control storage compartment is
designed on the right side of system. The
remote control can be magnetized into the
compartment easily for your quick and
convenient use.
13
Push here.
10
IR Sensor
14
Remote control magnet
Open the door.
.7.
17
11
15 16
12
1. U-Cubed knob
Turn to activate or deactivate the U-Cubed
(High Definition Wide Stereo) sound effect.
2. Bass knob
Turn to adjust a desired bass effect ranged
from +3 to -3.
3. Treble knob
Turn to adjust a desired treble effect ranged
from +3 to -3.
4. 30-pin Apple connector
Connect with iPhone/iPod.
5. Pair indicator
To indicate when building a wireless audio
connection.
6. Source button
Select iPod, tuner, AUX or wireless audio
mode by pressing repeatedly.
7. Mute button
Turn off the sound. Press again to restore the
sound output.
8. Vol +/- button
Press to increase (+) or decrease (-) the
volume level from 0 to 30.
9.
(Previous) /
(Next) button
Skip to the previous/next track in iPhone/
iPod and wireless audio modes.
Hold the button to fast-backward/fast-forward
a track.
Decrease/increase the frequency or select a
preset channel number (from 01 to 20) in
tuner mode.
10.
(Play/Pause) button
In iPhone/iPod and wireless audio modes,
press to play or pause a track.
Note: When the unit is building a wireless
audio connection with an iPad, this button
is disabled.
Saves a radio channel in tuner mode.
11.
(Power on/off ) button
Switch between standby and power-on
modes.
12. PAIR button
Build a wireless audio connection with an
external device.
13. LCD display
14. DC IN jack
Connect the supplied switch power adapter.
15. AUX IN jack
Connect external equipment to this jack.
16. FM.ANT (Antenna) jack
17. Receiver storage compartment
.8.
Remote Control
1.
2.
3.
4.
5.
6.
7.
(Power) button
Switch between power-on and standby
modes.
(Previous) /
(Next) button
Skip to the previous/next track in iPhone/
iPod and wireless audio modes. Hold the
button to fast-backward/fast-forward a track.
Decrease/increase the frequency or select a
preset channel number (from 01 to 20) in
tuner mode.
(Play/Pause) button
Play/pause a track when listening to iPhone/
iPod or wireless audio source. Hold to switch
the iPod to sleep mode.
Note: When the unit is building a wireless
audio with an iPad, this button is disabled.
Save a radio channel in tuner mode.
SOURCE button
Select iPod, tuner, AUX or wireless audio
mode by pressing repeatedly.
MUTE button
Turn off the sound. Press again to restore the
sound output.
U-Cubed button
Activate or deactives U-Cubed (High Definition
Wide Stereo) sound effect.
VOL +/- button
Press to increase (+) or decrease (-) the
volume level from 0 to 30.
Selecting the Sound Source
This system enables you to access one of the four basic
functions - iPod, tuner, AUX and wireless audio.
or
On the Unit
On the Remote Control
Press SOURCE button on the unit or remote control to select
one of the sound sources.
.9.
Playing back from iPhone/iPod
Setting an iPhone/iPod on the Unit
Compatible iPod Players: Most Apple iPod
models with 30-pin dock connectors as
follows: iPod nano 5th generation (video
camera), iPod nano 4th generation (video),
iPod nano 3rd generation (video), iPod nano
2nd generation (aluminum), iPod nano 1st
generation, iPod 4th generation (color
display), iPhone 3GS, iPhone 3G, iPod classic,
iPod 5th generation (video), iPod 4th
generation, iPod touch 1st generation, iPod
touch 2nd generation, iPhone, iPod mini.
1. Select the appropriate dock adapter made
for your iPhone/iPod.
l Use one of the supplied dock adapters or your
own from the Apple Inc.
l An identification number is marked on the
dock adapter.
Supplied
Dock adapter
Identification iPod Models Supported
Number
12
iPhone 4/8/16GB
14
iPod Touch
3. Connect your iPhone/iPod. Make sure the
connector plug of unit is firmly inserted into
the connector port of iPhone/iPod.
Notes:
l Always set volume to the minimum when
connecting or disconnecting the other
equipment.
l When you connect your iPhone/iPod to unit,
make sure you insert it all the way.
Listening to an iPhone/iPod
It is recommended to use an appropriate
dock adapter to protect your iPhone/iPod.
2. Insert the dock adapter as illustrated. The
small slot at the dock adapter should be at
the backside.
a. Match the dock adapter tabs to the front
holes in the cradle.
b. Press the other side onto the cradle until
a click sound.
1. Press the " " button to power on the system
from standby mode.
LCD Display
2. Select "iPod" mode with the SOURCE button.
Slot* b
LCD Display
Remove the iPod
dock adapter with
your fingernail by
using the slot.
3. When iPhone/iPod is selected as the sound
source, it automatically starts playback.
.10.
Press the Button
Unit
Remote Control
Functions
Start/Pause playback.
Hold this button to switch the iPod to sleep mode.
Next track/fast forward (press and hold).
Previous track/rewind (press and hold).
Charging an iPhone/iPod
The iPhone/iPod is charged while it is set on the
unit when the unit is powered on.
l The unit does not support iPod 3G (10/15/20/
30/40GB) charging mode.
l Make sure the AC adapter is connected to
the unit.
l The iPhone/iPod is charged regardless of the
sound source selected on the unit.
l See the iPhone/iPod instruction manual about
the details of iPhone/iPod charging.
Notes for Caring Your iPhone/iPod:
The connector plug is protected with a cover
when it is first purchased. Please remove the
cover before operating the unit.
This unit can only play the iPhone/iPod audio.
You can use the iPhone/iPod video function
and hear the audio but cannot play the
video.
Do not carry the System with iPhone/iPod
connected. You might drop it down or it
might cause damages to the connector part.
Do not touch or hit the iPhone/iPod terminal
pins or the connector pins directly. It might
cause damages to the connector part.
If the iPhone/iPod does not play correctly,
please update your iPhone/iPod software to
the latest version. - For details about
updating your iPhone/iPod, check on the
Apple web site .
.11.
iPod is a trademark of Apple Inc., registered in
the U.S. and other countries.
iPhone is a trademark of Apple Inc.
We are not responsible for any loss of or
damage to iPhone/iPod that might result
from the use of this product.
Sound distortion may occur when playing back
audio sources with high recording levels.
When distortion occurs, it is recommended
to turn off the equalizer of the iPhone/iPod.
For information on operating the iPhone/iPod,
see the iPhone/iPod instruction manual.
If you do not turn on the power of this unit
and only connect the iPhone/iPod to this
unit, power may be supplied to the iPhone/iPod.
"Made for iPod" and "Made for iPhone" and
"Made for iPad" mean that an electronic
accessory has been designed to connect
specifically to iPod/iPhone/iPad and has
been certified by the developer to meet
Apple performance standards.
Apple is not responsible for the operation of
this device or its compliance with safety and
regulatory standards.
For SFQ-01 Model ONLY
Playing back via Bluetooth
Downloading the SoundFreaq App
We have developed an App to give you full
control from your iPhone/iPad while playing
audio over the Bluetooth wireless connection,
please visit the iTunes App store and
download the "SoundFreaq Remote" App
for FREE.
After you build a Bluetooth connection between
your iPhone/iPad and the Sound Platform, a
prompt will be displayed on your iPhone/
iPad asking you if you would like to download
our App, click "Yes" to download.
If you hold the PAIR button during the process
of pairing, the operation will be cancelled.
Main Unit
PAIR Button
3. During this period, you can operate the mobile
phone, iPad or Bluetooth-enabled device to
pair with the unit within a 33 feet (10m)
range.
You can click "No" to choose not to download
the App and still play music via the
Bluetooth connection but you will have
limited control, we suggest you download
the App.
Please check the user manual of the iPad or
Bluetooth-enabled device with which you
are initiating pair to learn about Bluetooth
connection with any other devices.
4. Once the unit is detected and its name
"Sound Platform" appears on the display of
your iPad or Bluetooth-enabled device, key
in the default password "1234" if a prompt
requests it.
l You may change the device name on your
Bluetooth-enabled device after the pair is
successfully set up.
l The pair indicator starts blinking quickly to
indicate that the unit and your device have
put into the connection mode.
l When a Bluetooth connection is established
successfully, the indicator starts blinking
slowly.
l If the Bluetooth connection is completed in
the Bluetooth display, and a prompt chime
will sound.
5. Select Bluetooth mode by repeatedly pressing
the SOURCE button on the unit or remote
control.
6. Select the desired music and press "Play"
button on your device. The unit automatically
starts playing the audio.
l Try again above steps 2 to 5 if the Pair
indicator on the unit lights solidly.
Notes:
l A "receiver" was set in the receiver storage
compartment at the factory.
l The Bluetooth connection can be completed
in standby mode or power-on mode.
l If your mobile phone supports A2DP protocol,
its music will play through the unit.
l You can build a Bluetooth connection with a
mobile phone, an iPad or any other Bluetoothenabled devices.
1. Press the "
" button to power on the system
from standby mode.
l The pair indicator lights up when the unit is
powered on from the standby mode.
2. Press the PAIR button on the unit to put the
unit into the pair mode.
l The Pair indicator starts blinking at a fast rate.
l If the unit has previously linked with your
Bluetooth-enabled device, you only need to
turn on the unit and select the Bluetooth mode,
no further operation is needed. The Pair indicator
will blink at a lower rate. .
.12.
For SFQ-01W Model ONLY
Playing back from 2.4G Wireless Audio
Building a 2.4G Wireless Connection
Notes:
A "receiver" was set in the receiver storage
compartment at the factory.
l The 2.4G wireless connection can be completed
in standby mode or power-on mode.
1. Press the " " button to power on the system
from standby mode.
2. Plug the supplied USB dongle into your device.
(for example, your computer)
4. Select 2.4G wireless sound source by repeatedly
pressing the SOURCE button on the unit or
remote control.
LCD Display
The pair indicator is solid on before the
connection is built successfully
Pair indicator
Pair button
A single USB dongle can be connected by up to
8 units simultaneously.
Blinking
5. Press the PAIR button on the front panel and
the "Pair" button on the dongle at the same
time until the link is established.
Supplied Dongle
Computer
Pair Button
Expanding the System in Multiple
Rooms
To expand your listening areas in other rooms,
install additional units (sold separately) possibly
in bedroom, kitchen and garage, or on the patio
as you prefer.
Dongle
When a 2.4G wireless connection is established
successfully, the indicator starts blinking
slowly.
6. Select the desired music and press "Play"
button on your device. The system starts
playing the audio automatically.
l Try again above step 5 if the Pair indicator on
the unit lights solidly.
USB Dongle
Make sure the supplied USB dongle is well
connected to your device.
The pair indicator lights up when the unit is
powered on from the standby mode.
USB Dongle
Up to 8
Unit
Unit
Similar to the pair method of "Building a 2.4G
Wireless Connection", each time you pair the
USB dongle with a new joining unit, you need
to hold the "Pair" buttons on the dongle and
unit at the same time until the link is
established. Select your desired audio source to
play, all the units you paired will sound at the
same time.
Upgrading Wireless Connection Mode
For SFQ-01 user, you can purchase a 2.4G wireless
receiver to upgrade the connection mode by
replacing the receiver located in the storage
compartment on the back of unit.
3. Set a new "receiver" into the storage compartment
as shown.
For SFQ-01W user, you can purchase a Bluetooth
receiver to upgrade the connection mode by
replacing the receiver located in the storage
compartment on the back of unit.
Blinking
Unit
"THIS SIDE UP" is
marked on the
receiver.
If you have any question, please consult your
dealer.
Main Unit
3. Launch the music player software if you build
a link with a computer.
PAIR Button
The pair indicator stars blinking quickly to
indicate that the system and your device
have put into the connection mode.
1. Open the cover of receiver storage compartment
located on the back of unit.
2. Remove the "receiver" from the storage
compartment.
Make sure the new "receiver"
connected to the system.
4. Close the "receiver" storage cover.
is well
DO NOT REMOVE RECEIVER UNLESS YOU ARE UPGRADING WIRELESS CONNECTION MODE. PLEASE
VISIT SOUNDFREAQ.COM FOR FURTHER DETAILS.
.13.
.14.
Listening to Tuner
Presetting a Station
Press the Button
Unit
1. Select tuner mode with the SOURCE button.
Functions
Remote Control
Switch between the frequency display and channel number display.
Tune the desired frequency or channel number based on the
different display.
Frequency display
Channel number display
Hold this button to enter saving mode. Press to save a channel.
(see "Presetting a station”)
Select a channel (from 01 to 20).
LCD Display
2. Switch to the frequency display if the display
is channel number.
3. Tune a desired frequency. You can use either
of the below methods to tune the frequency.
A. Manual Tuning - Briefly press "
"/ "
button repeatedly to move frequency to
frequency (from 87.5 MHz to 108.0 MHz)
until you find the desired station.
Hold for more than one second to activate the Auto Scan function,
and then release the button. The frequency will be scanned
automatically until a radio station is found. Or press again to quit
search while searching.
Listening to a Station
Note: Position the antenna as far away as
possible from the AC adapter, a TV, or other
radiation source.
1. Plug the supplied FM antenna into the
FM.ANT jack located on the back of unit.
2. Press the "
" button to power on the
system from standby mode.
5. Use " "/ " " on the unit or remote control
to select the channel number (from 01 to 20)
to be set.
6. Press " " button again to store the frequency.
The selected frequency will then be stored
with the preset channel number. The display
will be switched automatically to channel
number display after a few seconds.
LCD Display
Change frequency from 87.5MHz to 108.0MHz in FM mode.
B. Auto Scanning - Hold "
"/ "
" button
until the frequency display starts flashing.
The frequency will be scanned automatically
until a station is found.
4. Hold "
" button to start storing a station.
l The channel number shows on the display.
Playing back from External Source
Listening to an External Audio
Device, Digital Music Player or Any
Other Audio Source
Connect an external device to the AUX IN jack
on the back panel of the unit using a stereo
mini plug cord (not supplied).
1. Turn the unit power on.
2. Set the volume to the minimum position.
3. Select AUX mode with the SOURCE button.
LCD Display
3. Select tuner mode with the SOURCE button.
LCD Display
LCD Display
4. Select a desired radio station for listening.
5. Move the antenna around to get the best
reception.
6. If necessary, adjust the volume level.
FM Antenna
.15.
4. Start playback on the external device.
5. Adjust the volume level to the level that you
want to listen to.
Back Panel
To audio output such
as CD/MD/ digital
music player, etc.
LCD Display
Note: Volume level will be shown on the display
in the process of adjustment.
.16.
Activating "U-Cubed" Sound Effect
"U-Cubed" is an proprietary technology designed to create an ultra wide stereo sound
field in digital music systems. With exceptional natural sound reproduction of high definition and
fidelity, we create a listening experience where you feel like your speakers are separated much more
than they are.
To activate UQ3 on:
l The unit, turn the "
" knob once to activate, turn again to deactivate.
l On the remote or remote App, press the "
" button to activate and deactivate
Technical Specifications
Model
Type
Sound Platform
Support Bluetooth
Bluetooth 1.2 and 2.0 compliant
Support Profile
A2DP
Input Sensitivity/Impedance
AUX Input
Troubleshooting
Check this list for a possible troubleshooting solution before calling for service.
In These Cases
Power does not come on.
Cannot set the iPhone/iPod.
Cannot operate iPhone/iPod.
Check the following points
• AC adapter is not inserted securely. Plug in securely.
1200 mV
Band
Tuner
Notes:
l The bass and treble cannot be adjusted when UQ3 is activated.
l In tuner mode, the U-Cubed sound effect can not be activated.
SFQ-01/SFQ-01W
FM
Frequency Step
100 KHz
Preset Stations
20
Audio Output
Speaker 4 ohms
Input Terminal
External DC IN (for AC adapter), AUX IN
Power Source
DC 18 V
AC Adapter
3.3 A (External DC IN)
Input: AC 100-240V, 50/60Hz
Output: DC 18 V
320mm (W) * 168mm (H) * 154mm (D)
Weight
2.01Kg (including receiver)
• Is the selected dock adapter compatible to your iPhone/iPod?
• Is the dock adapter properly mounted on the unit? Make sure to mount the
dock adapter properly.
• Is the connector plug of the unit firmly inserted into the connector port of
the iPhone/iPod?
• Is the connector plug of the unit firmly inserted into the connector port of
the iPhone/iPod?
• Is the AC adapter plug firmly inserted into DC IN jack of the unit?
Hard to listen to broadcasts
because of noise.
• The antenna is not properly extended or positioned.
• Tune to the correct radio channel/frequency.
• Making sure the antenna is further away from any equipment that may be
causing the noise or interference.
Unable to operate the
System from the remote
control.
• The path between the remote control and the sensor on the unit is
blocked.
• The battery of remote control is exhausted.
No sound output.
• Check if the volume level is set to the minimum.
• Check if the volume level is muted. Press MUTE button on the unit again to
restore the sound output.
The system does not react
when the buttons are
pressed.
• Remove and reconnect the AC power plug and turn on the system again.
.17.
3.3 A
Dimensions (Approx.)
• Is the iPhone/iPod properly functioning? Test the iPhone/iPod functions in
stand-alone condition.
iPhone/iPod cannot be
charged.
87.5 ~ 108.0 MHz
Tuning Range
.18.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Foxit PDF Creator Version 2.0.0 build 0725
Create Date                     : 2010:06:18 13:35:37+08:00
Modify Date                     : 2010:07:22 14:58:11+08:00
Metadata Date                   : 2010:07:22 14:58:11+08:00
Creator Tool                    : C:\Corel\Graphics8\Programs\coreldrw.exe
Format                          : application/pdf
Creator                         : scarlett
Title                           : D:\Products form 2010\SFQ_1\11 User Manuals\Manual Cover a.cdr
Document ID                     : uuid:606a87a2-b907-4b06-bb1f-f5c6f34d45ed
Instance ID                     : uuid:f5117bb8-0eac-4b25-a249-873c98f3d64b
Has XFA                         : No
Page Count                      : 10
For                             : user, synchron
Bounding Box                    : 43 17 805 551
Creator Version                 : 10
Container Version               : 9
Author                          : scarlett
Image Height                    : 534
Image Width                     : 762
Image Size                      : 762x534
Megapixels                      : 0.407

EXIF Metadata provided by EXIF.tools