Beautiful Enterprise SFQ14 Sound Rise Classic User Manual SFQ 14 QSG 20170613

Beautiful Enterprise Co., Ltd. Sound Rise Classic SFQ 14 QSG 20170613

Contents

Users Manual-1

Size: 130x150 mmSNOOZE/LIGHT SNOOZE/LIGHT SNOOZE / LIGHT Quick Start Guide Sound Rise Classic Quick Start Guide Sound Rise ClassicTIME SETALARM SET Quick Start Guide Sound Rise ClassicGetting to know Sound Rise ClassicDisplayed when alarm is snoozedDisplayed when backup battery is lowDisplayed during volume settingFlashed when alarm goes off with BEEP soundIndicates if Sleep timer is setStandby modeBluetooth modeRadio mode Aux mode FM/MHz Displayed when radio is onFM/MHzSetting the TimeTurn the TIME SET knob on the back of the unit in the direction of arrow until correct time is shown.TIME SETSetting the Alarm1 Turn the ALARM SET knob on the side of the unit in the direction of arrow until the desired wakeup alarm time is shown.2Slide the ALARM switch to ON position to complete the alarm setting. 3 Slide the WAKE TO switch to select the alarm sound among RADIO/BT/AUX/BEEP modes.Notes: To wake up to music from your phone or other devices, you must first pair Sound Rise Classic. To wake up to radio, you must first set the desired radio station. When waking up to Bluetooth or AUX IN, Sound Rise Classic will play the current song on your connected device. If your device is not available or not playing back when the alarm goes off, Sound Rise Classic will wake you with the built-in chime after a while. Setting the Alarm VolumeThe default alarm volume is set at maximum. To adjust your desired wakeup alarm volume level, you can 1 Press POWER button to switch off the unit first. 2Press and hold ALM VOL button for 3 seconds to display the current alarm volume level. 3Press “+/-” buttons to adjust to the desired alarm level. 4 Press ALM VOL button again to confirm.Notes:It is recommended to set the alarm to a higher/maximum volume level on your device and on the clock radio. Please test the alarm sound level to make sure it is loud enough for waking up.Using the Alarm1 When the alarm goes off, slide the ALARM switch to turn the alarm off.2If you prefer to get some more sleep after the alarm goes off, press button while alarm is sounding. You can also press the button repeatedly to set the snooze duration to 10->20->5 minutes. The alarm sound will be temporarily paused and Z will be shown on the display. You can repeat snooze up to 12 times.ALARM SETALARMONPOWER–/+ALM VOL ALARMOFFWAKE TO3211324Do not set the volume too low on your device for alarm wakeup purpose.
Using the Speaker –/+POWERSOURCEListening via BluetoothSOURCE POWERVolumePlay ControlSOURCE POWERTo pair another new device or disconnect a device that has already been paired, simply press and hold the PAIR button on Sound Rise Classic for 3 seconds and “BT” indication will flash rapidly again, and select “Sound Rise Classic” on your new device.Notes:SOURCE POWERPAIRProgramming Radio Presets1Tune to the preferred station.2Press and hold the PRESET button. The preset number will flash “P01”.3Press “+/-” to change the preset number.4Press PRESET button again to save the current station to the preset number selected.5To select a stored preset station to listen, press to walk through the stored stations. There are SIX radio presets to save your favorite FM stations.To save a preset: –/+You can charge most phones as well as other USB chargeable devices directly from Sound Rise Classic. Simply connect your device to the USB Port on the back of Sound Rise Classic to begin charging.Charging an External DeviceNotes: The maximum charging output of Sound Rise Classic is 5V / 1A. USB Charging PortUsing the Sleep TimerUse SNOOZE/LIGHT button to set a timer to listen to music while falling asleep.1Press and hold the button for 3 seconds to enter sleep timer. Press repeatedly again to set the timer duration: 15, 30, 60, 90, 120, OFF.2The “SLEEP” icon will be shown on the display. Tap button will show the remaining time after sleep timer is activated.3To turn the sleep timer off, press and hold the button for 3 seconds and “SLEEP” icon will disappear.AUX IN PlugFM antennaSOURCEPRESET Quick Start Guide Sound Rise Classic Quick Start Guide Sound Rise Classic Quick Start Guide Sound Rise Classic1 Plug in the power adaptor (included).2 Insert 1x AA(1.5V ) backup battery (included) observing the correct polarity and replace the battery cover. 3 Press the POWER button to turn the speaker on.4 Press the SOURCE button repeatedly to select the audio sources.(The indication of audio source will display on the screen.) FM Radio(FM) Bluetooth(BT) AUX IN(AUX)5 Press “+/-” to set the volume.6 Press the POWER button again to turn the audio off.Using the BacklightPress button to momentarily turn the light on the dial on for 5 seconds.SNOOZE/LIGHT SNOOZE/LIGHT SNOOZE/LIGHT SNOOZE/LIGHT Using UQ3 Sound EnhancementPress the UQ3 button to turn on/off the UQ3 effect for music enjoyment. The“ U ON ” will display when UQ3 is activated. Press UQ3 button again to deactive the effect.Polarity Power AdaptorUQ3SNOOZE / LIGHTSNOOZE / LIGHT1 Press the POWER button to turn on the unit.2 Press the SOURCE button repeatedly until “BT” appears on the display to select Bluetooth mode.3 Press PAIR on Sound Rise Classic to start pairing mode. The BT indication on Sound Rise Classic’s display will flash rapidly.4 On your phone, tablet or computer, open your Bluetooth setting menu to detect available devices. Tap to select “Sound Rise Classic” from the list of devices in Bluetooth settings. On most devices, no password is needed to pair, however, if a password is requested, the default password is “1234”.Bluetooth PairingListening with AUX In1Connect any device with a standard headphone jack using an Aux In cable (not included) to the AUX IN on the back of Sound Rise Classic.1Press the POWER button to turn on the unit.2Press the SOURCE button repeatedly until “BT”appears on the display to select Bluetooth mode.3You can change the volume by either using the volume buttons on the Sound Rise Classic or changing the volume on your paired device. For max volume, turn both volumes to maximum.4Use the Play Control buttons on Sound Rise Classic to remotely control your connected devices and to play, pause and skip tracks.Listening with Radio<</>>1Extend the FM antenna on the back of the unit to full length. 2Press the POWER button to turn on the unit.3Press the SOURCE button repeatedly until “FM” appears on the display to select Radio mode.4Press the <</>> buttons to search a desired radio station for listening.(Long press for station scanning.)Notes: Press PRESET button to toggle between the displaying preset station number and the preset station frequency. Replacing BatteryWhen the power of backup battery is low, the low battery indication will flash to indicate the alert of battery replacement. Please replace it immediately to avoid leakage of battery.2Press the POWER button to turn on the unit.3Press the SOURCE button repeatedly until “AUX”appears on the display to select Aux In mode.<</>> POWER

Navigation menu