Beautiful Enterprise SFQ14 Sound Rise Classic User Manual SFQ 14 QSG 20170613

Download:
Mirror Download [FCC.gov]
Document ID	3513373
Application ID	TtPKzEdCsicXhLgoFfty4g==
Document Description	Users Manual-1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	74.03kB (925314 bits)
Date Submitted	2017-08-16 00:00:00
Date Available	2017-08-17 00:00:00
Creation Date	2017-06-13 16:41:00
Producing Software	Adobe PDF library 10.01
Document Lastmod	2017-06-13 16:41:00
Document Title	SFQ-14 QSG_20170613
Document Creator	Adobe Illustrator CS6 (Windows)

Size: 130x150 mm
Quick Start Guide
Sound Rise Classic
Quick Start Guide
Sound Rise Classic
Getting to know Sound Rise Classic
Quick Start Guide
Sound Rise Classic
Setting the Alarm
ALARM SET
1 Turn the ALARM SET knob on the side of the unit in the direction of arrow until the
desired wakeup alarm time is shown.
2 Slide the ALARM switch to ON position to complete the alarm setting.
3 Slide the WAKE TO switch to select the alarm sound among RADIO/BT/AUX/BEEP modes.
Notes:
FM/MHz
To wake up to music from your phone or other devices, you must first pair Sound Rise
Classic.
To wake up to radio, you must first set the desired radio station.
When waking up to Bluetooth or AUX IN, Sound Rise Classic will play the current song on
your connected device. If your device is not available or not playing back when the alarm
goes off, Sound Rise Classic will wake you with the built-in chime after a while.
Standby mode
Indicates if Sleep timer is set
Bluetooth mode
Displayed during volume setting
Flashed when alarm goes off with BEEP sound
Radio mode
Displayed when alarm is snoozed
Aux mode
Displayed when backup battery is low
FM/MHz Displayed when radio is on
TIME SET
Setting the Time
Turn the TIME SET knob on the back of the unit in the direction of arrow until correct
time is shown.
The default alarm volume is set at maximum. To adjust your desired wakeup alarm volume
level, you can
1 Press POWER button to switch off the unit first.
2 Press and hold ALM VOL button for 3 seconds to display the current alarm volume level.
3 Press “+/-” buttons to adjust to the desired alarm level.
4 Press ALM VOL button again to confirm.
Notes:
ALARM SET
TIME SET
Setting the Alarm Volume
It is recommended to set the alarm to a higher/maximum volume level on your device and
on the clock radio. Please test the alarm sound level to make sure it is loud enough for
waking up.
Do not set the volume too low on your device for alarm wakeup purpose.
Using the Alarm
1 When the alarm goes off, slide the ALARM switch to turn the alarm off.
2 If you prefer to get some more sleep after the alarm goes off, press SNOOZE / LIGHT
button while alarm is sounding. You can also press the SNOOZE / LIGHT button
repeatedly to set the snooze duration to 10->20->5 minutes. The alarm sound will be
temporarily paused and Z will be shown on the display. You can repeat snooze up to 12
times.
ON
WAKE TO
ALARM
2 4
–/+
ALM VOL
POWER
OFF
ALARM
SNOOZE / LIGHT
Quick Start Guide
–/+
Using the Speaker
1 Plug in the power adaptor (included).
2 Insert 1x AA(1.5V ) backup battery (included) observing the
correct polarity and replace the battery cover.
3 Press the POWER button to turn the speaker on.
4 Press the SOURCE button repeatedly to select the
audio sources.(The indication of audio source will display on
the screen.)
FM Radio(FM)
Bluetooth(BT)
AUX IN(AUX)
5 Press “+/-” to set the volume.
6 Press the POWER button again to turn the audio off.
Sound Rise Classic
SOURCE
Polarity
POWER
1 Press the POWER button to turn on the unit.
2 Press the SOURCE button repeatedly until “BT” appears on the
display to select Bluetooth mode.
3 Press PAIR on Sound Rise Classic to start pairing mode. The BT indication on
Sound Rise Classic’s display will flash rapidly.
4 On your phone, tablet or computer, open your Bluetooth setting menu to detect
available devices. Tap to select “Sound Rise Classic” from the list of devices in
Bluetooth settings. On most devices, no password is needed to pair, however, if
a password is requested, the default password is “1234”.
Power Adaptor
Volume
PAIR
POWER
Notes: To pair another new device or disconnect a device that has already been paired, simply press and hold the PAIR button on
Sound Rise Classic for 3 seconds and “BT” indication will flash rapidly again, and select “Sound Rise Classic” on your
new device.
Sound Rise Classic
2 Press the POWER button to turn on the unit.
3 Press the SOURCE button repeatedly until “AUX”appears on the display to
select Aux In mode.
Using the Sleep Timer
SOURCE
POWER
There are SIX radio presets to save your favorite FM stations.
To save a preset:
1 Tune to the preferred station.
2 Press and hold the PRESET button. The preset number will flash “P01”.
3 Press “+/-” to change the preset number.
4 Press PRESET button again to save the current station to the preset number
selected.
5 To select a stored preset station to listen, press to walk through the stored
stations.
Notes: Press PRESET button to toggle between the displaying preset station
number and the preset station frequency.
button to set a timer to listen to music while falling asleep.
1 Press and hold the SNOOZE / LIGHT
button for 3 seconds to enter sleep
timer. Press repeatedly again to set the timer duration: 15, 30, 60, 90, 120,
OFF.
2 The “SLEEP” icon will be shown on the display. Tap SNOOZE / LIGHT
button will show the remaining time after sleep timer is activated.
3 To turn the sleep timer off, press and hold the SNOOZE / LIGHT button for
3 seconds and “SLEEP” icon will disappear.
SOURCE
SNOOZE / LIGHT
Charging an External Device
FM antenna
<>
SOURCE
POWER
Programming Radio Presets
SNOOZE / LIGHT
Quick Start Guide
Use SNOOZE/LIGHT
Listening with Radio
1 Extend the FM antenna on the back of the unit to full length.
2 Press the POWER button to turn on the unit.
3 Press the SOURCE button repeatedly until “FM” appears
on the display to select Radio mode.
4 Press the <> buttons to search a desired radio station
for listening.(Long press <> for station scanning.)
SOURCE
Play Control
1 Press the POWER button to turn on the unit.
2 Press the SOURCE button repeatedly until “BT”appears on the display
to select Bluetooth mode.
3 You can change the volume by either using the volume buttons on the
Sound Rise Classic or changing the volume on your paired device. For max
volume, turn both volumes to maximum.
4 Use the Play Control buttons on Sound Rise Classic to remotely control your
connected devices and to play, pause and skip tracks.
button to momentarily turn the light on the dial on for 5
Bluetooth Pairing
Sound Rise Classic
Listening via Bluetooth
Using the Backlight
Press SNOOZE / LIGHT
seconds.
Quick Start Guide
PRESET
–/+
You can charge most phones as well as other USB chargeable devices directly
from Sound Rise Classic.
Simply connect your device to the USB Port on the back of Sound Rise Classic to
begin charging.
Notes : The maximum charging output of Sound Rise Classic is 5V / 1A.
USB Charging Port
Using UQ3 Sound Enhancement
Press the UQ3 button to turn on/off the UQ3 effect for music enjoyment. The
“ U ON ” will display when UQ3 is activated. Press UQ3 button again to deactive
the effect.
Replacing Battery
Listening with AUX In
When the power of backup battery is low, the low battery indication will flash
to indicate the alert of battery replacement. Please replace it immediately to
avoid leakage of battery.
1 Connect any device with a standard headphone jack using an Aux In
cable (not included) to the AUX IN on the back of Sound Rise Classic.
AUX IN Plug
UQ3
POWER

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Format                          : application/pdf
Title                           : SFQ-14 QSG_20170613
Creator Tool                    : Adobe Illustrator CS6 (Windows)
Create Date                     : 2017:06:13 16:41+08:00
Modify Date                     : 2017:06:13 16:41+08:00
Metadata Date                   : 2017:06:13 16:41+08:00
Thumbnail Width                 : 232
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 22640 bytes, use -b option to extract)
Document ID                     : xmp.did:FC9E79A91350E711A68ED79DFE6170CA
Instance ID                     : uuid:8e179574-5ae0-4ed4-86bc-5ccd33100c27
Original Document ID            : uuid:D15F7014074AE511B8AEE760CB769E09
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:FB9E79A91350E711A68ED79DFE6170CA
Derived From Document ID        : xmp.did:FB9E79A91350E711A68ED79DFE6170CA
Derived From Original Document ID: uuid:D15F7014074AE511B8AEE760CB769E09
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:1E8AEBC4414EE611BF75FC76DD12DAEB, xmp.iid:FC9E79A91350E711A68ED79DFE6170CA
History When                    : 2016:07:20 14:18:26+08:00, 2017:06:13 16:40:54+08:00
History Software Agent          : Adobe Illustrator CS6 (Windows), Adobe Illustrator CS6 (Windows)
History Changed                 : /, /
Startup Profile                 : Print
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : True
Max Page Size W                 : 427.089521
Max Page Size H                 : 210.000274
Max Page Size Unit              : Millimeters
Font Name                       : AkzidenzGroteskBE-BoldCn, AkzidenzGroteskBE-BoldIt, AkzidenzGroteskBE-Cn
Font Family                     : Berthold Akzidenz Grotesk BE Co, Berthold Akzidenz Grotesk BE, Berthold Akzidenz Grotesk BE Co
Font Face                       : Bold, Bold Italic, Regular
Font Type                       : Open Type, Open Type, Open Type
Font Version                    : 001.000, 001.000, 001.000
Font Composite                  : False, False, False
Font File Name                  : AkzidenzGroteskBE-BoldCn.otf, AkzidenzGroteskBE-BoldIt.otf, AkzidenzGroteskBE-Cn.otf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : Default Swatch Group
Swatch Groups Group Type        : 0
Swatch Groups Colorants Swatch Name: AutoCAD Color 4
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Cyan    : 57.021397
Swatch Groups Colorants Magenta : 0.024400
Swatch Groups Colorants Yellow  : 15.329200
Swatch Groups Colorants Black   : 0.000000
Producer                        : Adobe PDF library 10.01
Page Count                      : 2
Creator                         : Adobe Illustrator(R) 16.0
For                             : Ding Xiu Juan(S_ENG) �B�q�S,
Bounding Box                    : 1127 -1750 2233 -516
Container Version               : 11
Creator Version                 : 16

EXIF Metadata provided by EXIF.tools