Berlin Group IR160US Internet Radio User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3903938
Application ID	PeP73QUp0ApcNKQ3Duc3TQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	48.73kB (609182 bits)
Date Submitted	2018-06-27 00:00:00
Date Available	2018-06-27 00:00:00
Creation Date	2018-05-21 13:34:26
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2018-05-21 13:34:26
Document Title	Microsoft Word - User manual.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

User manual
Product: INTERNET RADIO
Model: US-10031584
1.Features/Technical Specifications
Available for global stations by internet
Compatible with the audio of WMA/MP3/OGG
With 2.8” RGB TFT screen
With the adaptor of DC 5.9V/1.2A
Access to available Wi‐Fi Internet
2. Main Keys
1.
Speaker
2.
Menu‐‐‐Show Menu for the current mode
3.
Left‐‐‐Turn left
4.
Fav‐‐‐Quick access to favorite stations
5.
Standby‐‐‐ Press to switch between standby and on
6.
Volume/Navigator/OK‐‐‐Combine key
Rotate rotary knob to adjust the volume when in working mode
Rotate rotary knob to select when in menu mode
Press rotary knob to confirm when in menu mode
Switch program menu when in working mode
7.
Sleep‐‐‐ Press to set the sleep timer
8.
Right‐‐‐Turn right
9.
Alarm‐‐‐Alarm setting
10. Dimmer‐‐‐Adjust the brightness of screen to different level
11. TFT screen
12. Rating label recess
13. On/Off switch button
14. DC IN socket
15. Line out socket
16. Aux in socket
17. USB port‐play your USB sticks
3. Switch On or Off
Plug the adaptor into the DC in socket (on the rear of the product) and switch the “ON/OFF”
switch to “ON”, then “Welcome” will be shown on the screen. Meanwhile, the radio will scan
the available access point automatically. You can use the button Volume/Navigator to choose
the internet, and then press OK to confirm the Internet.
The steps are as below for first use:
1.
There will be prompt: Would you like to configure Network now? Press Navigator knob to
Choose YES. Then the internet radio will scan available network.
2.
Choose the network you want to connect by switching the navigator knob and press it to
confirm.
3.
It will remind you to enter password, by switching the navigator button to input the
number, letter or character. After finishing input, presses navigator knob to confirm your
input.
4.
Then your internet radio connected to your network.
Tips: When you need input the internet password, please press Navigator button to choose
the characters. In this condition, press Left button can turn left and delete the left characters
at the same time:
Note: Below characters are available for the radio:
Numbers (from 0‐9)
English letters ( from A to Z and from a to z)
Other characters ( DEL ,@,Blank,!,”,#,$,%,&,*,’,+ and (,).
3. Basic Operation
→Time Display →Analog
→Digital
→Manage my mediaU
→ Network →
Wireless Network Configuration
→ Wireless Network(WPS PBC)
→ Manual Configuration
→ Check Network when Power On
→ Date&Time
→Configuration
→ Set Date and Time
→ Set Time Format
→ Set Date Format
Main
interface
Enter →
→ Alarm
→Alarm 1(Turn Off)→Turn On
→Turn Off
→Alarm 2(Turn Off)→Turn On
→Turn Off
→NAP Alarm 1(Turn Off)
→Alarm Volume
→ Timer
→ Language
→ Dimmer → Power Saving
→ Turn On
→ Display →Color
→Monochrome
→Power Managemet
→ Sleep Timer
→ Buffer
→ Weather →Set Location
→ Temperature Unit
→Show on Standy
→Configuration →Local Radio Setup→Manual Setup(Country)
→Manual Setup (City)
→ Auto Detect
Main
interface
Enter
→
→ Playback Setup → Off
→ Repeat all
→ Repeat one
→ Shuffle
→ DLNA Setup →Rename（AirMusic）
→ AirMusic Control App
→ Equaliser
→ Resume When Power On
→On
→Off
→ Software Update
→ Reset to Default
→Internet Radio
→My Favorite
→Radio Station/Music
→Local Radio
→History
→Service →Search Radio Station
→Add New Radio Station
→Media Center
→USB
→UPnP
→My Playlist
→Clear My playlist
→Information Center
→ Weather Information
→ Financial Information
→ System Information
4. Function Operation
1). AUX(Line input)
Function: To set up the playing mode of program with audio play from out source.
Press Menu→Rotate navigate button to choose Aux →Press OK to confirm.
2) Internet Radio
Functions: To set up the play mode of internet radio
Steps: Press Menu→Rotate Navigate button to choose Internet
radio→ Press OK button to enter the interface, then below choices will
be shown on the screen:
1. My Favorite
2. Radio Station/Music
3. Local Radio
4. History
5. Service
3). Media Center
3.1 USB
Functions : Play the audio medium by USB,which is
compatible with the files of WMA/MP3/AAC/AAC+/FLAC/WAV.
Steps : Press Menu→Rotate Navigate button to choose “Media Center”
→Press OK to enter the interface. →Choose “USB” by rotate Navigate button→ Enter it by OK
button.
Compatible with USB3.0 and lower versions.
For the setup of play, please refer to the Playback setup in Configuration.
3.2 UPNP
FUNCTIONS: Play the media in computer.
Steps: Press Menu→ Rotate Navigate button to choose“
Media Center” →press OK button to enter the interface
→Choose“UPNP”by rotate Navigate button→Enter it by press OK
Button.
Note: You must install the software of“Windows Media
Play 11”( or upgrade versions) or Twonky Media in
Your computer, which is necessary for the UPNP operation.
In“Windows Media Play”,you should get the media to share in your playlist.
Your computer must be available to the internet.
The media must be put in your playlist.
Your computer must be allowed to be linked with others.(You can set up it in “Windows
Media Play” by hand or automatically)
3.3 My Playlist
Steps: Press Menu→ Rotate Navigate button to choose“Media Center” →Press ok button to
enter the interface→Choose“My playlist” by rotate Navigate Button→Enter it by OK button.
Note: In the UPNP mode, when playing you can long press OK button to put the chosen file
into your ”My playlist”.
3.4Clear My Playlist
Press Menu→ Rotate Navigate button to choose“Media Center” →Press OK button to enter
the interface→Choose“Clear My playlist” by rotate Navigate Button→Enter it by Enter
button.
Note: By cutting off the power, the files of your “My playlist” will be cleared automatically.
6. My media U
Functions: Fastly play the program of internet radio per the personal playlist.
Steps: Standby →My media U→Press OK to confirm
Note: For the first time,you need register in http://www.mediayou.net and set up
related data before you use it,otherwise the display will show info to reminder you not
to connect the internet.
Note: This option default is disable.User need select Enable in Manage My Media U
of Configu ration ,then can see My media U in Menu.
7. Information Center
Functions:check the weather all over the world,
Browse the stock status of main stock exchange
globally,show the system info of the unit.
Steps: Press Menu→Rotate Navigate button to choose
“information center” →Press OK button to enter the interface→Choose the Item by rotate
Navigate button→ Confirm it by OK button.
7.1 Weather Information
Press OK button, it will enter the interface to choose location then choose the city by
Navigate button, press OK button to enter.
In the interface of city weather, you can check the weather in recent 5days by Left or right
button.
7.2 Financial infomation
Note: on the interface of “Financial information”,you can
Aim at your interested items by cursor, then the related
Information will be shown automatically.
7.3 System information
Functions: To check the software version,the MAC,ID and IP of
the wireless internet.
8. Configuration
Functions: To set up Network,Alarm,Date& Time,Language,Weather,Dimmer and etc.
Steps: Press Menu→Rotate Navigate button to choose“Configuration” → Press OK to
enter the interface→ Choose the item by Left or Right→ Confirm it by OK button
Note: Press Left button can return to the upper menu.
There are 20 items can be setting as below:
8.1 Time Display
Step: Press Menu→Configuration→Time Display
There are 2 models: Analog and Digital
If you select Analog mode, the time will show pointer clock in standby.If you select Digital,the
time will show digital clock.
8.2 Manage My MediaU
Note:“Enable” means to manage my media; “Disable” means
not to manage my media.
If you select Disable,My Media option of the menu will be conceal.If you select Enable,you can
see My Media U option in menu.
8.3 Network
8.3.1 Wireless Network Configuration
Note: It can search the wireless network automatically and
Show the searched list of network,then press OK to link it.(If the network is with password,
you should input the password.)
8.3.2 Wireless Network (WPS PBC)
10
Note: When choosing WPS PBC,It will show “Please press the
WPS button on your router within 120 Secs”,you must press
the WPS button of Router,then the network in both sides will
be linked automatically.
8.3.3 Manual Configuration
Steps: Press Menu→ Configuration→Network→Choose“Manual Configuration”by navigate
knob→Enter>Wireless>Enter . Then three items in the list (DHCP,Enter SSID,Manage).
Note: In the mode of ‘ON’( DHCP),the unit will check the IP address of wireless network and
link the network automatically.
In the mode of ‘OFF’(DHCP),the unit will check the IP address of wireless network and link the
network automatically.
8.3.4 Check Network when Power On
Functions: When“ Power On”,choose “Enable” to check the status of network link
automatically; choose “Disable” not to check it.
Note: If the network is not linked on the mode of “Enable”,it will automatically show the
choices for you to set up the network.
8.4 Date and Time
Steps: Press Menu→Configuration→Press OK to confirm→Press Rotate Navigate button to
choose “Date & Time” →Press OK button to enter the interface
8.4.1 set Date and Time
Manual Setup: You can manual set the date and time.
Auto Detect(UTC+00:00) 00:00 means the time
Difference between service and local time.
8.4.2 Set Time Format
Tips: The format of 24 hour is acquiescent
12 Hour
24 our
8.4.3 Set Date Format
Tips: The format of DD/MM/YYYY is acquiescent
YYYY/MM/DD
11
DD/MM/YYYY
MM/DD/YYYY
8.5 Alarm
To set up three alarms(Alarm1,Alarm 2,NAP Alarm) and the Alarm Volume.
Steps: Press Power→Configuration→Press OK to confirm→Press Rotate Navigate
button to choose “Alarm” →Press OK button to enter the interface.
8.5.1 The time of NAP Alarm is from 5 minutes to 120 minutes.And after the setup of the
NAP Alarm, it begins to count the time reversely until the time is over,then it will switch to
the standby model automatically and rings.
8.5.2 When alarm rings, it will enter the display of “Standby” automatically.
8.5.3 You can set up the alarm volume by “Alarm Volume”.(Volume 7 is acquiescent)
8.5.4 If you press any button when alarm rings,the alarm will be closed and enter the model
of standby with 5 minute SNOOZE.
8.5.5 To press Standby button, it will exit the mode of SNOOZE.
8.5.6 After the alarm setup, you should exit it, then the new setup can come into use.
8.5.7 Two alarms won’t ring at the same time.(Only after one alarm stop ringing,another
alarm can be used).
8.5.8 Alarm 1
Turn On
Turn Off
Repeat: To set up the Alarm Date
The choices are as below:
Everyday,Once,Mon,Tue,Wed,Thu, Fri, Sat,Sun
△ Time: To set up the Alarm time
△ Sound :To set up the Alarm sound
1）Beep
2）Melody
3）Internet Radio
4)USB
12
●Alarm sound Melody is acquiescent.
8.6 Timer
Steps: Press Power→Configuration→Press OK to confirm→Press Rotate Navigate button to
choose “Timer” →Press OK button to enter the interface.
Press Left and Right to set the time and confirm by press the rotary knob. When in Count
down, you can press OK button to stop.
8.7 Language
Step: Press Menu→Configuration→Language→Press ok to enter.
It can support 17 languages ：English，Deutsch，Espanol，Francais（France），Portuges，
Nederlands，Italiano，Pyccknn，Svenska，Norske，Dansk，magyar
Cesky，slovensky，poski，Turkce，Suomi，
8.8 Dimmer
Step: Press Menu→Configuration→Dimmer→Press OK to confirm→
Choose the Item by press Rotate Navigate button →Press OK button
to confirm →press Navigate button or Left and Right button to adjust the brightness.
Tips: There are two items for your choice (Power saving and Turn On).
8.9 Display
There are 2 models you can select : Color and
Monochrome
8.10 power management
Configure to go to standby mode automatically during in the menu or /and without Wifi
signal.
13
Minutes Choose the power management timer(5/15/30 mins) to set the duration of the radio
to switch standby mode automatically when you are not controlling it. Choose “Turn off” to
ignore the power management function.
8.11 Sleep Timer
To power off the unit automatically by setting up
the sleep timer.
Steps : Press Menu→Configuration→Sleep Timer
→ press OK to confirm.
The time range is from Turn OFF ,15,30,60,90,120,150,180 minutes
8.12 Buffer
Steps : Press Menu→Configuration→Buffer→select
the buffer from 2 seconds to 8 seconds
8.13 Weather
To show the current weather of selected city
Step : Press Menu→Configuration→Weather→Select to
choose the city and below Items are for your choice:
8.13.1 Set Location
To set up global city weather showing
Steps : Choose district →country→city→
Press OK to confirm it and the weather info will be shown in the display.
8.13.2
Temperature Unit: To set up the Temperature Unit by Centigrade or Fahrenheit
8.13.3 Show ON Standby :To turn on or turn off the setup
8.14 Local Radio Setup
Steps : Press Menu→Configuration→Local Radio Setup→Press OK to choose the status of
Local Radio(The station of local radio is Decided by the internet IP address).
8.14.1 Manual Setup
Steps : Press Standby→Configuration→Local Radio Setup→
14
Manual Setup→Choose district and country to enter the interface
→press OK (Save as local Radio”)will show on the display→
Press OK button to confirm .
8.14.2 Auto Detect
Step : Press Standby→Configuration→Local Radio Setup→“Auto Detect ” to check the stations
of Local Radio automatically.
Tips: It will create the radio station of local internet automatically as per the local and national
ID.
8.15. Playback Setup
Press Standby→Configuration→Local Radio Setup→Press OK to choose the play status
8.15.1
OFF
‘OFF’means to just play the chosen item .
8.15.2
Repeat all , ‘ Repeat all’ means to play the
Chosen item repeatedly.
8.15.3
Repeat one, means to play the chosen item
once.
8.15.4
Shuffle
“ Shuffle ”means to play all the items in your playlist
at random.
8.16 Device(DLNA setup)
Rename (Air Music)
If using the PC,Win 7 will support the DLNA
If using Samsung Smart Phone,it is with build‐
In DLNA
If using other Samsung Smart Phone,you can
Download the APP like Bubbleupn or Skifta to
Use the DLNA.
15
8.17
Equaliser
Fuction : ‘Equalizer’ can strength the music impact
On‐site
Steps : Press Menu→Configuration→Equalizer→Press OK
To choose different music impact(Normal→Flat→Jazz→Rock
→Soundtracks→Classical→POP→News
8.18 . Resume When Power On
Steps :Press Menu→Configuration→Resume When Power
On→Press OK to choose On or Off
‘On’,means to continue the mode automatically when the power was off
‘Off’ ,means not to continue the mode and just show the main menu when the power was off
8.19. Software Update
It’s just used for production and maintenance.
Caution : Before starting a software upgrade, ensure
That the unit is plugged into a stable mains power connection.
Disconnecting power during a software may permanetly damage the unit.
8.20 Reset to Defaut
Choose this item, it will show‘ Are you sure to reset
to default setting’.
‘YES’, it will delete all your present setup and
resume to the original mode
‘NO’ ,it will keep all your present setup and return
to the upper menu.
5.. Line output
You can switch the radio’s medium onto other Speakers by a 3.5mm audio line out
Tips : By doing so, you can control the media volume only by other speakers.
16
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
‐‐ Reorient or relocate the receiving antenna.
‐‐ Increase the separation between the equipment and receiver.
‐‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
‐‐ Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions (1)this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
The distance between the product and body is more than 20cm
17

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2018:05:21 13:34:26+08:00
Create Date                     : 2018:05:21 13:34:26+08:00
Format                          : application/pdf
Title                           : Microsoft Word - User manual.doc
Creator                         : Administrator
Document ID                     : uuid:8a422475-630c-4fb8-9a31-d83f77ffddfa
Instance ID                     : uuid:d6a2ffde-335b-4347-9c57-182b234269e9
Page Count                      : 17
Author                          : Administrator

EXIF Metadata provided by EXIF.tools