Bilian Electronic R8801MS1 IEEE 802.11b/g/n WLAN SDIO Module User Manual

Shenzhen Bilian Electronic Co., Ltd. IEEE 802.11b/g/n WLAN SDIO Module

User Manual

0BL-R8801MS1Product SpecificationIEEE 802.11b/g/n WLAN SDIO ModuleVersion: 1.0CustomerDateModel Name BL-R8801MS1Part NO.Blink Approve FieldENGINEER QC SALESCustomer Approve FieldENGINEER QC MANUFACTORY PURCHASING
B-LINK ELECTRONIC CO., LTD in shenzhen1ContentContent................................................................................................................................................................. 10. Revision History................................................................................................................................................11. General Description......................................................................................................................................... 22. The range of applying.......................................................................................................................................23. Product Specification....................................................................................................................................... 23.1 Function Block diagram.............................................................................................................................. 33.2 Electrical and Performance Specification................................................................................................... 33.3 Product Photo............................................................................................................................................. 43.4 Mechanical Specification............................................................................................................................ 53.5 Product Pin Definition.................................................................................................................................54. Supported platform..........................................................................................................................................64.1 DC characteristics........................................................................................................................................64.2 RF Characteristic......................................................................................................................................... 75. Typical Solder Reflow Profile........................................................................................................................... 86. Precautions for use.......................................................................................................................................... 90. Revision History
B-LINK ELECTRONIC CO., LTD in shenzhen2Date DocumentrevisionProductrevisionChange Description2015/05/11 1.0 V1.0 Draft initial release1. General DescriptionBL-R8801MS1 product is designed base on MARVELL 88W8801 chipset .It is a highly integratedsingle-band (2.4GHz) IEEE 802.11n 1X1 System-on-Chip (SoC), specifically designed to support HighThroughput data rates for next generation WLAN products. It supports IEEE802.11i safety protocol,along with IEEE 802.11e standard service quality. It supports the new data encryption on 64/128 bitWEP and safety mechanism on WPA-PSK/WPA2-PSK, WPA/WPA2. It can implement the wirelessnetwork function on the laptop/desktop/MID and other wireless devices easily .2. The range of applyingMID, networking camera, STB GPS, E-book, Hard disk player, Network Radios, PSP and other devicewhich need be supported by wireless networking.3. Product Specification
B-LINK ELECTRONIC CO., LTD in shenzhen33.1 Function Block diagram3.2 Electrical and Performance SpecificationItem DescriptionProduct Name BL-R8801MS1Major Chipset MARVELL 88W8801Host Interface SDIOStandard IEEE 802.11b, IEEE 802.11g,IEEE 802.11n,Frequency RangeModulation Type802.11b: CCK, DQPSK, DBPSK802.11g: 64-QAM,16-QAM, QPSK, BPSK802.11n: 64-QAM,16-QAM, QPSK, BPSKWorking Mode Infrastructure, Ad-HocData Transfer Rate 1,2,5.5,6,11,12,18,22,24,30,36,48,54,and maximum of 72.2MbpsSpread SpectrumIEEE 802.11b: DSSS (Direct Sequence Spread Spectrum)IEEE 802.11g/n:OFDM (Orthogonal Frequency DivisionMultiplexing)Sensitivity @PER 1M: -92dBm@8%PER2412MHz~2462MHz
B-LINK ELECTRONIC CO., LTD in shenzhen46M: -88dBm@10%PER11M:-86dBm@8%PER54M:-72dBm@10%PER72.2M:- 68dBm@10%PERRF PowerAntenna typeDimension(L*W*H) 13 x 13.5 x 1.46mm (LxWxH) ;Tolerance: +-0.15mmPower supply 3.3V +/-0.2VPower Consumption standby mode 70mA@3.3V ,TX mode 150mA@3.3VClock source 38.4MHzWorking Temperature -20°C to +70°CStorage temperature -40°C ~ +105°C3.3 Product Photo15dBm @802.11b/g/nInternal AntennaAntenna Gain 2.11dBiModule TOP Module BOTTOM TOP BOTTOM
B-LINK ELECTRONIC CO., LTD in shenzhen53.4 Mechanical SpecificationModule dimension: Typical (W x L x H): 13mmx13.5mmx1.46mm Tolerance : +/-0.15mm3.5 Product Pin Definition
B-LINK ELECTRONIC CO., LTD in shenzhen64. Supported platformSupport Linux platform.4.1 DC characteristicsTerms ContentsSpecification : IEEE802.11bMode DSSS / CCKFrequencyData rate 1, 2, 5.5, 11MbpsDC Characteristics min Typ. max. unitTX mode 140 151 160 mARx mode 70 72 75 mASleep mode 65 66 68 mASpecification : IEEE802.11gMode OFDMFrequencyData rate 6, 9, 12, 18, 24, 36, 48, 54MbpsDC Characteristics min Typ. max. unitFunction DescriptionSD _2 SDIO data 2 1SD _3 SDIO data 3 /GSPI chip select 2SD _CMD SDIO command/GSPI data input 3GND Ground 4SD _CLK SDIO clock /GSPI clock 5SD _D0 SDIO data 0 /GSPI data output 6SD _D1 SDIO data 1 /GSPI data out 7VCC3 3.3V power supply 8PD_n Power down (active low) 9GND Ground 10ANT_RF WLAN RF pad 11GND Ground 12WK_IN Wake/Suspend input control 13WK_OUT Wake/Suspend output control 142412MHz - 2462MHz2412MHz - 2462MHz
B-LINK ELECTRONIC CO., LTD in shenzhen7TX mode 90 95 150 mARx mode 72 73 75 mASleep mode 65 66 68 mASpecification : IEEE802.11nMode OFDMFrequencyData rate 6.5, 13, 19.5, 26, 39, 52, 58.5, 72.2MbpsDC Characteristics min Typ. max. unitTX mode 72 75 140 mARx mode 70 73 78 mASleep mode 65 66 68 mA4.2 RF CharacteristicMode Rate(Mbps) Power(dBm) EVM(dB) Sensitivity(dBm)CH1 CH7 CH13 CH1 CH7 CH13 CH1 CH7 CH1311b 1 17.02 17.37 16.85 -39.37 -37.29 -38.79 -93 -93 -9311 16.98 17.41 16.61 -39.49 -39.06 -39.57 -88 -88 -8811g 6 15.97 16.04 15.71 -23.36 -20.66 -20.34 -89 -89 -8954 15.28 15.07 14.49 -32.51 -31.98 -32.75 -73 -73 -7311nHT20MCS0 13.88 13.68 13.16 -26.61 -24.31 -24.90 -86 -86 -86MCS7 13.65 14.00 13.38 -34.66 -31.8 -32.96 -70 -70 -702412MHz - 2462MHz
B-LINK ELECTRONIC CO., LTD in shenzhen85. Typical Solder Reflow Profile
B-LINK ELECTRONIC CO., LTD in shenzhen96. Precautions for use1. Pls handle the module under ESD protection.2. Reflow soldering shall be done according to the solder reflow profile. Peak temperature245℃.3. Products require baking before mounting if humidity indicator cards reads >30% temp <30 degree C,humidity < 70% RH, over 96 hours.Baking condition: 125 degree C, 12 hoursBaking times: 1 time4. Storage Condition: Moisture barrier bag must be stored under 30 degree C, humidity under 85% RH. Thecalculated shelf life for the dry packed product shall be a 12 months from the bag seal date. Humidityindicator cards must be blue, <30%.
FCC Statement:  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.  This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.  Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.  The device complies with RF specifications when the device used at 20cm form your body.

Navigation menu