Bilian Electronic R8801MS1 IEEE 802.11b/g/n WLAN SDIO Module User Manual
Shenzhen Bilian Electronic Co., Ltd. IEEE 802.11b/g/n WLAN SDIO Module
User Manual
BL-R8801MS1 Product Specification IEEE 802.11b/g/n WLAN SDIO Module Version: 1.0 Customer Date Model Name BL-R8801MS1 Part NO. Blink Approve Field ENGINEER QC SALES Customer Approve Field ENGINEER QC MANUFACTORY PURCHASING B-LINK ELECTRONIC CO., LTD in shenzhen Content Content................................................................................................................................................................. 1 0. Revision History................................................................................................................................................1 1. General Description......................................................................................................................................... 2 2. The range of applying.......................................................................................................................................2 3. Product Specification....................................................................................................................................... 2 3.1 Function Block diagram.............................................................................................................................. 3 3.2 Electrical and Performance Specification................................................................................................... 3 3.3 Product Photo............................................................................................................................................. 4 3.4 Mechanical Specification............................................................................................................................ 5 3.5 Product Pin Definition.................................................................................................................................5 4. Supported platform..........................................................................................................................................6 4.1 DC characteristics........................................................................................................................................6 4.2 RF Characteristic......................................................................................................................................... 7 5. Typical Solder Reflow Profile........................................................................................................................... 8 6. Precautions for use.......................................................................................................................................... 9 0. Revision History B-LINK ELECTRONIC CO., LTD in shenzhen Date 2015/05/11 Document Product revision revision 1.0 V1.0 Change Description Draft initial release 1. General Description BL-R8801MS1 product is designed base on MARVELL 88W8801 chipset .It is a highly integrated single-band (2.4GHz) IEEE 802.11n 1X1 System-on-Chip (SoC), specifically designed to support High Throughput data rates for next generation WLAN products. It supports IEEE802.11i safety protocol, along with IEEE 802.11e standard service quality. It supports the new data encryption on 64/128 bit WEP and safety mechanism on WPA-PSK/WPA2-PSK, WPA/WPA2. It can implement the wireless network function on the laptop/desktop/MID and other wireless devices easily . 2. The range of applying MID, networking camera, STB GPS, E-book, Hard disk player, Network Radios, PSP and other device which need be supported by wireless networking. 3. Product Specification B-LINK ELECTRONIC CO., LTD in shenzhen 3.1 Function Block diagram 3.2 Electrical and Performance Specification Item Description Product Name BL-R8801MS1 Major Chipset MARVELL 88W8801 Host Interface SDIO Standard IEEE 802.11b, IEEE 802.11g,IEEE 802.11n, Frequency Range 2412MHz~2462MHz Modulation Type 802.11b: CCK, DQPSK, DBPSK 802.11g: 64-QAM,16-QAM, QPSK, BPSK 802.11n: 64-QAM,16-QAM, QPSK, BPSK Working Mode Infrastructure, Data Transfer Rate 1,2,5.5,6,11,12,18,22,24,30,36,48,54,and maximum of 72.2Mbps Spread Spectrum IEEE 802.11b: DSSS (Direct Sequence Spread Spectrum) IEEE 802.11g/n:OFDM (Orthogonal Frequency Division Multiplexing) Sensitivity @PER 1M: -92dBm@8%PER Ad-Hoc B-LINK ELECTRONIC CO., LTD in shenzhen 6M: -88dBm@10%PER 11M:-86dBm@8%PER 54M:-72dBm@10%PER 72.2M:- 68dBm@10%PER 15dBm @802.11b/g/n RF Power Antenna type Internal Antenna Antenna Gain 2.11dBi Dimension(L*W*H) 13 x 13.5 x 1.46mm (LxWxH) ;Tolerance: +-0.15mm Power supply 3.3V +/-0.2V Power Consumption standby mode 70mA@3.3V , TX mode 150mA@3.3V Clock source 38.4MHz Working Temperature -20°C to +70°C Storage temperature -40°C ~ +105°C 3.3 Product Photo BOTTOM TOP Module TOP Module BOTTOM B-LINK ELECTRONIC CO., LTD in shenzhen 3.4 Mechanical Specification Module dimension: Typical (W x L x H): 13mmx13.5mmx1.46mm Tolerance : +/-0.15mm 3.5 Product Pin Definition B-LINK ELECTRONIC CO., LTD in shenzhen Function Description SD _2 SDIO data 2 SD _3 SDIO data 3 /GSPI chip select SD _CMD SDIO command/GSPI data input GND Ground SD _CLK SDIO clock /GSPI clock SD _D0 SDIO data 0 /GSPI data output SD _D1 SDIO data 1 /GSPI data out VCC3 3.3V power supply PD_n Power down (active low) GND Ground 10 ANT_RF WLAN RF pad 11 GND Ground 12 WK_IN Wake/Suspend input control 13 WK_OUT Wake/Suspend output control 14 4. Supported platform Support Linux platform. 4.1 DC characteristics Terms Contents Specification : IEEE802.11b Mode DSSS / CCK Frequency 2412MHz - 2462MHz Data rate 1, 2, 5.5, 11Mbps DC Characteristics min Typ. max. unit TX mode 140 151 160 mA Rx mode 70 72 75 mA Sleep mode 65 66 68 mA Specification : IEEE802.11g Mode OFDM Frequency 2412MHz - 2462MHz Data rate 6, 9, 12, 18, 24, 36, 48, 54Mbps DC Characteristics min Typ. max. unit B-LINK ELECTRONIC CO., LTD in shenzhen TX mode 90 Rx mode 72 Sleep mode 65 150 mA 73 75 mA 66 68 mA 95 Specification : IEEE802.11n Mode OFDM Frequency 2412MHz - 2462MHz Data rate 6.5, 13, 19.5, 26, 39, 52, 58.5, 72.2Mbps DC Characteristics min Typ. max. unit TX mode 72 75 140 mA Rx mode 70 73 78 mA Sleep mode 65 66 68 mA 4.2 RF Characteristic Mode 11b 11g 11n HT20 Rate(Mbps) Power(dBm) EVM(dB) Sensitivity(dBm) CH1 CH7 CH13 CH1 CH7 CH13 CH1 CH7 CH13 17.02 17.37 16.85 -39.37 -37.29 -38.79 -93 -93 -93 11 16.98 17.41 16.61 -39.49 -39.06 -39.57 -88 -88 -88 15.97 16.04 15.71 -23.36 -20.66 -20.34 -89 -89 -89 54 15.28 15.07 14.49 -32.51 -31.98 -32.75 -73 -73 -73 MCS0 13.88 13.68 13.16 -26.61 -24.31 -24.90 -86 -86 -86 MCS7 13.65 14.00 13.38 -34.66 -31.8 -32.96 -70 -70 -70 B-LINK ELECTRONIC CO., LTD in shenzhen 5. Typical Solder Reflow Profile B-LINK ELECTRONIC CO., LTD in shenzhen 6. Precautions for use 1. Pls handle the module under ESD protection. 2. Reflow soldering shall be done according to the solder reflow profile. Peak temperature 245℃. 3. Products require baking before mounting if humidity indicator cards reads >30% temp <30 degree C, humidity < 70% RH, over 96 hours. Baking condition: 125 degree C, 12 hours Baking times: 1 time 4. Storage Condition: Moisture barrier bag must be stored under 30 degree C, humidity under 85% RH. The calculated shelf life for the dry packed product shall be a 12 months from the bag seal date. Humidity indicator cards must be blue, <30%. FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The device complies with RF specifications when the device used at 20cm form your body.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Author : Create Date : 2016:07:19 15:19:52+08:00 Modify Date : 2016:07:19 15:19:52+08:00 Subject : Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Metadata Date : 2016:07:19 15:19:52+08:00 Creator Tool : PScript5.dll Version 5.2.2 Format : application/pdf Title : Description : Creator : Document ID : uuid:937771d8-106d-41ed-87d8-f5a207047bb6 Instance ID : uuid:85c8b3da-3a13-4e55-a230-8935d2f5bd72 Producer : Adobe Acrobat Pro 9.0.0 Page Count : 11EXIF Metadata provided by EXIF.tools