Billion Electric BIL-AWDL060 4G LTE Embedded Mini-Card Module User Manual
Billion Electric Co., Ltd. 4G LTE Embedded Mini-Card Module
User Manual
WW-DL060 4G LTE Embedded Mini-Card Module Standard Version 0.4 Document release Date Version 0.1 2013/06/10 Verison 0.2 Modification Initials Approved Initial version James Li Daniel Lee 2013/07/09 Spec update Daniel Daniel Verison 0.3 2013/07/09 Add packing SOP Irene Lin Irene Lin Version 0.4 2013/07/29 Update packing SOP Fiona Liang Fiona Liang 8F., No.192, Sec. 2, Zhongxing Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.). TEL: + 886-2-2914-5665 FAX: + 886-2-2918-6731, +886-2-2918-2895 www.billion.com -1- 1. General Description 1-1. Product Overview and Functional Description Billion Electric Co., Ltd. introduces the embedded mini-card for 4G LTE data communication – WW-DL060. The demands of data communication everywhere becomes more due to the great development of 4G LTE system. WW-DL060 adopts GCT GDM7240 solution. It provides up to 50 Mbps Downlink, up to 25 Mbps Uplink and RX antenna diversity etc. WW-DL060 is fast, reliable and easy to operate. Therefore, by WW-DL060 mobile user can experience the new features and surf the internet everywhere. FCC Caution <15.21 > ‧Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. ‧This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. FCC Statement Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: ● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and receiver. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. !● Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 8F., No.192, Sec. 2, Zhongxing Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.). TEL: + 886-2-2914-5665 FAX: + 886-2-2918-6731, +886-2-2918-2895 www.billion.com -2- RF exposure statements: Information to OEM integrator The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user manual of the end product. The user manual which is provided by OEM integrators for end users must include the following information in a prominent location. 1. To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. 2. Only those antennas with same type and lesser gain filed under this FCC ID number can be used with this device. 3. The regulatory label on the final system must include the statement: “Contains FCC ID: xxxx or using electronic labeling method as documented in KDB 784748. 4. The final system integrator must ensure there is no instruction provided in the user manual or customer documentation indicating how to install or remove the transmitter module except such device has implemented twoways authentication between module and the host system. This module can't be used on radio system and operation Individually. Using others antenna must be re-testing and certification. 8F., No.192, Sec. 2, Zhongxing Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.). TEL: + 886-2-2914-5665 FAX: + 886-2-2918-6731, +886-2-2918-2895 www.billion.com -3- 1-2. Antenna Description Type: Dipole Antenna A. Electrical Characteristics Frequency 700 ~ 960 MHz S.W.R. <= 3.5 @ 700 ~ 960 MHz Antenna Gain 1.37 dBi Polarization Linear Impedance 50 Ohm B. Material & Mechanical Characteristics Material of Radiator Cu Material of Plastic TPE & ABS Cable Type RG-178 Connecter Type SMA Male Pull Test >= 5 Kg C. Environmental Operation Temperature - 40 ˚C ~ + 65 ˚C Storage Temperature - 40 ˚C ~ + 80 ˚C 8F., No.192, Sec. 2, Zhongxing Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.). TEL: + 886-2-2914-5665 FAX: + 886-2-2918-6731, +886-2-2918-2895 www.billion.com -4- 1-2. Key Features Supporting Following Standards LTE : Long Term Evaluation (3GPP E-UTRA Release 8) E-UTRA: Evolved Universal Terrestrial Radio Access Supporting Following Service LTE packet data service Supporting Following Features FDD: Frequency Division Duplex RX diversity Uplink data rate up to 25 Mbps Downlink data rate up to 50 Mbps Mini PCI Express form factor, USB interface *Maximum data rate is subject to 4G services provided by network operators Operating Systems Supported Microsoft Windows XP ,Microsoft Vista , Microsoft Windows 7 Android: 2.3, 3.0, 4.0 Linux: 8F., No.192, Sec. 2, Zhongxing Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.). TEL: + 886-2-2914-5665 FAX: + 886-2-2918-6731, +886-2-2918-2895 www.billion.com -5- 1-3. Specifications Table Model Name WW-DL060 Product Description 4G LTE embedded mini card module Technical Standard Host Interface LTE (3GPP R8) USB (through mini-PCI Express interface) Operating Conditions Voltage 3.3V Temperature Operating: -20~70 Storage: -40~85 Humidity 15% ~ 95% Dimension 51mm X 30mm Form Factor Mini PCI Express Card Electrical Specifications FDD 700 MHz (Band 12): Operating Frequency UP-Link:699~716 MHz DL-Link: 729~746 MHz Maximum Output Power LTE 700 MHz: 23dBm (Class 3) Antenna Dual IPEX antenna port Receive Sensitivity LTE 700 MHz: compliant with 3GPP TS 36.521-1 8F., No.192, Sec. 2, Zhongxing Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.). TEL: + 886-2-2914-5665 FAX: + 886-2-2918-6731, +886-2-2918-2895 www.billion.com -6- 2. Electrical Characteristics 2-1. Recommended Operating Conditions Power Parameter Tolerance Units 3.3V Module power supply +-9% 2-2. Power supply and Current Requirement: The WW-DL060 complies with PCI express Mini CEM specifications v1.2. PCI express Mini CEM specifications define as the below Table: Power Tolerance Max. Current Idle Current 3.3V +-9% 700 mA TBD mA Note. The idle current is generally less than 100mA, depending on the FW version. 8F., No.192, Sec. 2, Zhongxing Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.). TEL: + 886-2-2914-5665 FAX: + 886-2-2918-6731, +886-2-2918-2895 www.billion.com -7- 3. Pin Definition 3-1. Pin Assignment Pin No Definition Basic Description NC 3.3V NC GND NC No connect NC No connect NC No connect UIM_PWR GND 10 UIM_DATA 11 NC 12 UIM_CLK 13 NC 14 UIM_RESET 15 GND 16 NC No connect 17 NC No connect 18 GND 19 NC No connect 20 NC No connect 21 GND Ground 22 *NC No connect 23 NC No connect 24 3.3Vaux 25 NC 26 GND Ground 27 GND Ground 28 NC 29 GND 30 NC Type No connect 3.3V DC supply Input No connect Ground Power source for external UIM/SIM Output Ground External UIM/SIM data signal Input/output No connect External UIM/SIM clock signal Output No connect External UIM/SIM reset signal Output Ground Ground Note 1 3.3V_FMC DC supply No connect No connect Ground No connect 8F., No.192, Sec. 2, Zhongxing Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.). TEL: + 886-2-2914-5665 FAX: + 886-2-2918-6731, +886-2-2918-2895 www.billion.com -8- Pin No Definition Basic Description 31 NC No connect 32 NC No connect 33 NC No connect 34 GND Ground 35 GND Ground 36 USB_D- 37 GND 38 USB_D+ USB signal D+ 39 3.3Vaux 3.3V_FMC DC supply 40 GND 41 3.3Vaux 42 LED_WWAN_1 43 GND 44 NC No connect 45 NC No connect 46 NC No connect 47 NC No connect 48 NC No connect 49 NC No connect 50 GND 51 NC 52 3.3V USB signal D- Type Input/Output Ground Input/Output Input Ground 3.3V_FMC DC supply Input Active Low LED signal for indicating the state of the module open drain structure If no use this pin, connect to GND Output Ground Ground No connect 3.3V DC power supply Input Note: Please don’t series NC pin to ground or bias voltage. Note1: Please keep pin 22 NC If want to preset module Recommend to add a switch to turn off and turn on 3.3V DC power 8F., No.192, Sec. 2, Zhongxing Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.). TEL: + 886-2-2914-5665 FAX: + 886-2-2918-6731, +886-2-2918-2895 www.billion.com -9- 4. Mechanical drawing 8F., No.192, Sec. 2, Zhongxing Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.). TEL: + 886-2-2914-5665 FAX: + 886-2-2918-6731, +886-2-2918-2895 www.billion.com - 10 -
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Page Count : 10 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:148a29e2-8464-41a6-87e5-dcaaf3623350 Producer : Acrobat Distiller 6.0.1 (Windows) Create Date : 2013:09:05 14:47:54+08:00 Modify Date : 2013:09:05 14:47:54+08:00 Document ID : uuid:db75ee51-6779-4cf7-b2a9-4952b1f6adfc Format : application/pdf Title : untitledEXIF Metadata provided by EXIF.tools