Billion Electric BIL-BEC430M 4G/LTE Mobile Hotspot User Manual BEC 430M QSG V1 0 2017 1024

Download:
Mirror Download [FCC.gov]
Document ID	3689623
Application ID	l3mUvR+oZ5hDjO2ATT3mGA==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	160.19kB (2002314 bits)
Date Submitted	2017-12-22 00:00:00
Date Available	2017-12-22 00:00:00
Creation Date	2017-11-07 16:31:05
Producing Software	Adobe PDF library 9.90
Document Lastmod	2017-12-22 08:41:16
Document Title	BEC 430M QSG V1.0_2017_1024
Document Creator	Adobe Illustrator CS5

BEC 430M 4G/LTE Mobile Hotspot
BEC 430M 4G/LTE Mobile Hotspot
Hello,
Application Scenarios
Thank you for purchasing BEC 430M, the portable 4G LTE
I. Wi-Fi Hotspot: 4G internet sharing via Wi-Fi mode
BEC 430M 4G/LTE Mobile Hotspot
What’s in the Box
performance of 4G LTE, automatic 3G failover, with Wi-Fi
hotspot for mobile Internet connectivity wherever you go.
I. SIM & Battery - Insert / Remove
Internet access and download / upload / share files, music
and photos, and more all at the same time.
Step 1 Gently pull and remove the battery cover off the device
This Quick Start Guide helps you to set up your BEC 430M and
Step 3 Insert the SIM card in a correct direction into
Step 2 Remove the battery
II. USB Modem: Connect with a PC / Notebook
the slot completely, follow the indication next to the
make sure the battery is fully charged before using for the first
card slot.
time prior to powering on your 4G/LTE Mobile Hotspot.
Step 4 Insert a memory SD card if needed
Mid-frame Housing
SD Card Slot
Battery Cover
LCD Screen
Faceplate
10
Power Button
WPS Button
microUSB Port
Reset Button
Battery / SIM Compartment
BEC 430M 4G/LTE Mobile Hotspot
IV.
Connect to the Internet
aligned then gently press it down to secure the battery.
Set up and connect your
Step 6 Replace the battery cover and press firmly along the
notebook, smart phone or tablet
with the 430M wirelessly.
Remove the battery cover to
find your unique SSID and Wi-Fi key in WPA/WPA2-PSK mode.
BEC 430M 4G/LTE Mobile Hotspot
profile by entering
Verify or update the security mode (default in WPA/WPA2-
details such as Profile
PSK) and/or Pre-shared Key. Click Next.
BEC 430M 4G/LTE Mobile Hotspot
V.
Restart (Reboot) / Factory Restart
BEC 430M 4G/LTE Mobile Hotspot
Product Support and Contact Information
If you have other inquiries or need further technical support,

Restart / Reboot the Device
information provided by
To reboot your 430M without deleting current save
your service provider.
settings such as Internet profile, DDNS, Firewall, etc.
www.bectechnologies.net.
Click Next.
Step 5: Confirm and Save Settings
Step 3: Wi-Fi Hotspot –Change SSID
Verify or update your Wi-Fi network name (SSID) to a unique
and different name.
Verify all settings and click Apply to save and complete the
Setup Wizard.
You should now be able to access to the
Internet.

Reset Factory Restart
In case you have forgotten the login password, SSID, or
Wi-Fi passphrase (password), you can factory restart your
430M by deleting all settings you have configured and
saved.
Click Next.
You may also press and hold the RESET button on the
back of the 430M until the device restarts again.
To access to the 430M again, you will need to use the
default credential to log back in to the device. (Refer to IV.
Connect to the Internet in this document)
V1.0
10
11
12
please contact with your Internet Service Provider or visit us at
Name, APN, username
/ password, and other
The Home page displays current WAN & LAN network status,
total number of connected Wi-Fi clients, statistic and 4G LTE
signal strength.
screen start flashing.
Step 4: Wi-Fi Hotspot –Change Security Mode
The login prompt will appear and input the default password
(admin) to access to the Home Page.
Turn on your BEC 430M
Wireless LAN Connection
edge to ensure all side tabs click into place.
Access to the Web Management of 430M
Make sure your Wi-Fi device is connected and received an IP
address from the BEC 430M.
To start, press and hold the power button until LED / LCD
Step 5 Put the battery back and make sure the gold contact
Otherwise, select Manual to create a new enter a new Internet
WARNING Use only the provided power supply and battery with your BEC
430M as they are approved and designed for the device. Use of an
incompatible battery or power supply from an unknown manufacturer may
increase the risk of device malfunctions, failure, overheat, explode resulting
property damage, body injure, etc. Such use voids all warranties, whether
expressed or implied, on the product.
III.
BEC 430M 4G/LTE Mobile Hotspot
Default Management IP: 192.168.0.1 / 255.255.255.0
Open a web browser and type http://192.168.0.1 in the URL
address bar and enter.
immediately after the charger is plugged in.
have up to 8 Wi-Fi enabled clients to enjoy instant mobile
USING YOUR BEC 430M
430M for the first time.
If your 430M have not been used for a period of time or the
Hardware Overview
PLEASE READ THIS DOCUMENT CAREFULLY BEFORE
Fully charge the battery before attempting to power on the BEC
battery is fully depleted, the 430M may not get powered on
Using the BEC 430M, you may send/receive text messages,
how to use its key features. To begin, insert your SIM card and
BEC 430M 4G/LTE Mobile Hotspot
II. Battery –Charging
Get Started
BEC 430M Device x 1
USB Cable x 1
Power adapter x 1
This Quick Start Guide
Mobile Hotspot. This device offers high-speed and great
BEC 430M 4G/LTE Mobile Hotspot
FCC Statement
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate
the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
SAR Information Statement
Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for
exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are
part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on
standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies.
The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The
exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The
SAR limit set by the FCC is 1.6 W/kg. * Tests for SAR are conducted with the phone transmitting at its highest certified power level in
all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone
while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so
as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the
power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not
exceed the limit established by the government adopted requirement for safe exposure. The tests are performed in positions and
locations (e.g., at the ear and worn on the body) as required by the FCC for each model. when worn on the body, as described in this
user guide, is 1.421W/Kg(Body-worn measurements differ among phone models, depending upon available accessories and FCC
requirements). The maximum scaled SAR in hotspot mode is 1.421W/Kg. While there may be differences between the SAR levels of
various phones and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an
Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RFexposure
guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of
http://www.fcc.gov/ oet/fccid after searching on
FCC ID: QI3BIL-BEC430M Additional information on Specific Absorption Rates (SAR) can be found on the Cellular
Telecommunications Industry Asso-ciation (CTIA) web-site at http://www.wow-com.com. * In the United States and Canada, the SAR
limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of
10mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar
accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these
requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Create Date                     : 2017:11:07 16:31:05+09:00
Modify Date                     : 2017:12:22 08:41:16-05:00
Creator Tool                    : Adobe Illustrator CS5
Metadata Date                   : 2017:12:22 08:41:16-05:00
Thumbnail Width                 : 256
Thumbnail Height                : 132
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 13242 bytes, use -b option to extract)
Producer                        : Adobe PDF library 9.90
Format                          : application/pdf
Title                           : BEC 430M QSG V1.0_2017_1024
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : False
Max Page Size W                 : 420.341785
Max Page Size H                 : 216.843439
Max Page Size Unit              : Millimeters
Font Name                       : ArialMT, Arial-BoldItalicMT, Arial-BoldMT, Arial-ItalicMT, TimesNewRomanPSMT, AdobeSongStd-Light, Webdings, Arial,Bold
Font Family                     : Arial, Arial, Arial, Arial, Times New Roman, Adobe 宋体 Std, Webdings, Arial,Bold
Font Face                       : Regular, Bold Italic, Bold, Italic, Regular, L, Regular
Font Type                       : Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Unknown
Font Version                    : Version 5.06, Version 5.06, Version 5.06, Version 5.06, Version 5.07, Version 5.016;PS 5.002;hotconv 1.0.67;makeotf.lib2.5.33168, Version 5.00, Version 5.016;PS 5.006;hotconv 1.0.67;makeotf.lib2.5.33168
Font Composite                  : False, False, False, False, False, False, False, False
Font File Name                  : arial.ttf, arialbi.ttf, arialbd.ttf, ariali.ttf, times.ttf, AdobeSongStd-Light.otf, webdings.ttf, AdobeHeitiStd-Regular.otf
Plate Names                     : Cyan, Magenta, Yellow, Black, PANTONE Cool Gray 4 C
Swatch Group Name               : 默认色板组
Swatch Group Type               : 0
Swatch Colorant Swatch Name     : [Registration], PANTONE Cool Gray 4 C
Swatch Colorant Type            : PROCESS, SPOT
Swatch Colorant Tint            : 100.000000, 100.000000
Swatch Colorant Mode            : RGB, Lab
Swatch Colorant Red             : 0
Swatch Colorant Green           : 0
Swatch Colorant Blue            : 0
Swatch Colorant L               : 76.078400
Swatch Colorant A               : 0
Swatch Colorant B               : 0
Document ID                     : xmp.did:28C2E58993C3E711BBDEC792755F85FA
Instance ID                     : uuid:af8dee2c-f005-4e4b-b8bc-ef1ec4e6fb57
Original Document ID            : xmp.did:22018c94-1f1b-294c-8eaa-dbb369ed63e7
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:27C2E58993C3E711BBDEC792755F85FA
Derived From Document ID        : xmp.did:27C2E58993C3E711BBDEC792755F85FA
Derived From Original Document ID: xmp.did:22018c94-1f1b-294c-8eaa-dbb369ed63e7
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:22018c94-1f1b-294c-8eaa-dbb369ed63e7, xmp.iid:170dfa4b-7e70-f648-be13-29899e060b4f, xmp.iid:24C2E58993C3E711BBDEC792755F85FA, xmp.iid:25C2E58993C3E711BBDEC792755F85FA, xmp.iid:27C2E58993C3E711BBDEC792755F85FA, xmp.iid:28C2E58993C3E711BBDEC792755F85FA
History When                    : 2017:11:01 16:24:18+08:00, 2017:11:01 16:24:34+08:00, 2017:11:07 16:13:29+08:00, 2017:11:07 16:15:36+08:00, 2017:11:07 16:27:09+08:00, 2017:11:07 16:31:01+08:00
History Software Agent          : Adobe Illustrator CC 2017 (Windows), Adobe Illustrator CC 2017 (Windows), Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5
History Changed                 : /, /, /, /, /, /
Page Count                      : 2
Creator                         : Adobe Illustrator(R) 15.0
For                             : Administrator,
Bounding Box                    : -1853 255 -661 870
Container Version               : 11
Creator Version                 : 15

EXIF Metadata provided by EXIF.tools