Bionime BM300 BLE module User Manual BT SPEC

Bionime Corporation BLE module BT SPEC

OEM Installation Manual

Download: Bionime BM300 BLE module User Manual BT SPEC
Mirror Download [FCC.gov]Bionime BM300 BLE module User Manual BT SPEC
Document ID3187957
Application IDO32EOX5WKAfukAX/d4BQRA==
Document DescriptionOEM Installation Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize111.67kB (1395837 bits)
Date Submitted2016-11-06 00:00:00
Date Available2016-11-08 00:00:00
Creation Date2016-11-01 08:46:55
Producing SoftwarePDFCreator 2.3.0.103
Document Lastmod2016-11-01 08:46:55
Document TitleBT SPEC
Document CreatorPDFCreator 2.3.0.103
Document Author: Lambert.Li

華 廣 生 技 股 份 有 限 公 司
Check List
Doc. No.:
Subject:工程規格書/Engineering Specification
Rev.:
Project Code:
Model Name: BM300
1 OF
Page:
Effective Date:
Change History
CICN NO#
Page
Rev.
Effective
Date
Reason For Release
First Released
Copy to (all contents):
Copy to(cover sheet):
Approved By :
Prepare By:
Form No:FT-73-01-10D
Reviewed
Dep.
Manager
Executor
By
Dep.
□SL
□QA
□MK
□LM
□CT
■PO
■PD
□AU
□PM
□RO
■PE
■QC
□TW
□
Manager
Executor
華 廣 生 技 股 份 有 限 公 司
Check List
Subject:工程規格書/Engineering Specification
Doc. No.:
Rev.:
Project Code:
Model Name: BM300
Page:
2 OF
Effective Date:
NCC 警語
「減少電磁波影響,請妥善使用」。
依據低功率電波輻射性電機管理辦法
第十二條 經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均 不得擅自變更頻率、加大功率
或變更原設計之特性及功能。
第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干 擾現象時,應立即停用,並改
善至無干擾時方得繼續使用。
前項合法通信,指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學
及醫療用電波輻射性電機 設備之干擾。」
Form No:FT-73-01-10D
華 廣 生 技 股 份 有 限 公 司
Check List
Subject:工程規格書/Engineering Specification
Doc. No.:
Rev.:
Project Code:
Model Name: BM300
Page:
3 OF
Effective Date:
FCC Statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
FCC Label Instructions:
The outside of final products that contains this module device must display a label referring to the
enclosed module. This exterior label can use wording such as the following: “Contains Transmitter
Module FCC ID: [put FCC ID here]” or “Contains FCC ID: [put FCC ID here].” Any similar wording that
expresses the same meaning may be used.
Form No:FT-73-01-10D
華 廣 生 技 股 份 有 限 公 司
Check List
Doc. No.:
Subject:工程規格書/Engineering Specification
Rev.:
Project Code:
Model Name: BM300
4 OF
Page:
Effective Date:
Feature:
Item
Specification
Chip
DA14580
Standard
Bluetooth V4.1
RF band
2402 ~ 2480MHz
Interface
UART
RF Output Power
-20dBm ~0 dBm
Sensitivity
>-93 dBm
Remark
ISM band
Mechanical Specifications
Item
Outline Dimension
Form No:FT-73-01-10D
Standard Value
Unit
12.25 (W) * 15.26 (L) * 1.9 (H)
mm
華 廣 生 技 股 份 有 限 公 司
Check List
Doc. No.:
Subject:工程規格書/Engineering Specification
Rev.:
Project Code:
Model Name: BM300
5 OF
Page:
Effective Date:
Absolute Maximum Ratings
Module
Item
Symbol
Condition
Min.
Max.
Unit
System Power Supply Voltage
VDD
-0.1
+3.6
Operating Temperature
TOP
-0
+50
°C
Storage Temperature
TST
-20
+70
°C
Storage Humidity
HD
Ta ≦ 40 °C
20
80
%RH
DC Electrical Characteristics
Module
Item
Power Supply Voltage
Input Signal Voltage
Output Signal Voltage
Supply Current
Form No:FT-73-01-10D
GND = 0V, Ta = 25°C
Symbol
Condition
Min.
Typ.
Max.
VDD
2.5
3.0
3.3
VIH
0.84
VIL
0.36
VOH
1.88
VOL
0.47
VCC =3.0V *1
IDD
VCC =3.0V *2
Unit
mA
uA
華 廣 生 技 股 份 有 限 公 司
Check List
Subject:工程規格書/Engineering Specification
Doc. No.:
Rev.:
Project Code:
Model Name: BM300
Page:
6 OF
Effective Date:
Pin Definition:
Pin No
Symbol
BLE_ PCL
BLE_STATUS
P0.5
P0.4
BLE_RST
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
P1.2
SWDIO
SWDCLK
--Wake up BLE
VDD
GND
----BT_TX
--BT_RX
GND
P0.7
GND
--GND
-----
25
VPP
26
GND
Form No:FT-73-01-10D
Function Description
BLE_ PCL ,ON = L、OFF = H
BLE_STATUS ,ON = L、OFF = H
GPIO
GPIO
INPUT. Reset signal (active high). Must be connected to GND if
not used.
GPIO
This signal is the JTAG data I/O by default
This signal is the JTAG clock by default
Dummy
Wake up BLE ,ON = L、OFF = H
Power supply for BLE. supply of 2.0V ~ 3.3V.
Ground
Dummy
Dummy
UART data output pin,MCU data to BLE
Dummy
UART data input pin,BLE data to MCU
Ground
GPIO
Ground
Dummy
Ground
Dummy
Dummy
INPUT. This pin is used while OTP programming and testing.
OTP programming: VPP = 6.8 V ± 0.25 V
OTP Normal operation: leave VPP floating
Ground
Note
華 廣 生 技 股 份 有 限 公 司
Check List
Subject:工程規格書/Engineering Specification
Doc. No.:
Rev.:
Project Code:
Model Name: BM300
Page:
Effective Date:
Mechanical Diagram
Form No:FT-73-01-10D
7 OF
華 廣 生 技 股 份 有 限 公 司
Check List
Subject:工程規格書/Engineering Specification
Doc. No.:
Rev.:
Project Code:
Model Name: BM300
Page:
Effective Date:
Block Diagram
Form No:FT-73-01-10D
8 OF
華 廣 生 技 股 份 有 限 公 司
Check List
Subject:工程規格書/Engineering Specification
Doc. No.:
Rev.:
Project Code:
Model Name: BM300
Page:
Effective Date:
Module Application Circuit:
Form No:FT-73-01-10D
9 OF
華 廣 生 技 股 份 有 限 公 司
Check List
Subject:工程規格書/Engineering Specification
Doc. No.:
Rev.:
Project Code:
Model Name: BM300
Page:
Effective Date:
Module Bill of Material:
Item
Part No.
503-040000-0P0
503-040000-0Q0
502-021057-010
501-011032-020
505-040000-2K0
505-040000-2L0
505-020000-0B0
505-040000-0E0
Form No:FT-73-01-10D
Designator
U1
U2
C1,C2,C3,C4
R4, R5
L1
L2
Y1
E1
Comment
DA14580 / QFN 40
MX25V1006E / USON 8L
1uF / 10V / X5R /±10% / 0402
10KΩ / ±5% / 0402
2.2uH±10%-1608
3.9nH±0.3nH-1005
16 MHz/ FA-128
AT5020-B2R8HAA
10 OF
華 廣 生 技 股 份 有 限 公 司
Check List
Subject:工程規格書/Engineering Specification
Doc. No.:
Rev.:
Project Code:
Model Name: BM300
Page:
Effective Date:
Software & Operation Mode
UART Configuration
Baud Rate
Start Bit
Data Bits
Stop Bits
Parity Bit
Timeout : 500 ms
Form No:FT-73-01-10D
9600 bps
None
11 OF
華 廣 生 技 股 份 有 限 公 司
Check List
Doc. No.:
Subject:工程規格書/Engineering Specification
Rev.:
Project Code:
Model Name: BM300
12 OF
Page:
Effective Date:
Instruction Set
Function
Instruction
Set BGM Device ID
“ {“
LEN
ID-1
ID-2
…
ID-n
CS
Command
“}”
LEN
ID-1
ID-2
…
ID-n
CS
0x27
White List
CS
0xD8
Status Byte
CS
0x28
CS
0xD7
CS
0x29
CS
0xD6
CS
0x5F
CS
0xA0
CS
0x5B
CS
0xA4
Status Byte
CS
0x5A
indexL
indexH
CS
0xA5
indexL
indexH
data0
…
data9
CS
0x59
indexL
indexH
data0
…
data9
CS
0xA6
indexL
indexH
data0
…
data9
CS
0x58
Section Index
CS
0xA7
Section Index
CS
0x57
CS
0xA8
CS
Pairing
Pair Completion
White List Full
Check BLE
Clear White List
Read BLE Flash
Write BLE Flash
BLE
Flash
writing
area setting
Write BLE Flash End
Form No:FT-73-01-10D
華 廣 生 技 股 份 有 限 公 司
Check List
Doc. No.:
Subject:工程規格書/Engineering Specification
Rev.:
Project Code:
Model Name: BM300
13 OF
Page:
Effective Date:
Set BGM Device ID Command:
Byte Index
…
MCU to BLE Command
‘}’
LEN
ID-1
ID-2
…
BLE to MCU Return Data
‘{’
LEN
ID-1
ID-2
…
‘ } ’ : Header of MCU set command, ASCII Format.
‘ { ’ : Header of BLE return data. ASCII Format.
LEN : Length of BGM ID. HEX value.
ID-1 ~ ID-n : Unique ID of BGM. ASCII format.
Range 0x01 ~ 0x14 (1~20)
CS : Checksum.
Checksum Byte = (Byte[0] + byte[1] + …. Byte[n]) & 0xFF
Pairing:
Byte Index
BLE to MCU Command
‘[’
0x27
White List
MCU to BLE Return Data
‘]’
0xD8
Status Byte
‘ [ ’: Header of BLE set command, ASCII Format.
‘ ] ’: Header of MCU return data. ASCII Format.
White List : paired quantity
Status Byte: 0x00:Agree
0x01:Deny
0x02:Wait
Pair Completion
Byte Index
BLE to MCU Command
‘[’
MCU to BLE Return Data
‘]’
BLE module pairing is completed
0x28
0xD7
White List Full
Byte Index
BLE to MCU Command
‘[’
0x29
MCU to BLE Return Data
‘]’
0xD6
Whitelist is full and can no longer new pairing
Form No:FT-73-01-10D
CS
CS
CS
CS
CS
CS
LEN+1
ID-n
ID-n
LEN+2
CS
CS
華 廣 生 技 股 份 有 限 公 司
Check List
Doc. No.:
Subject:工程規格書/Engineering Specification
Rev.:
Project Code:
Model Name: BM300
14 OF
Page:
Effective Date:
Check BLE
Byte Index
MCU to BLE Command
‘]’
BLE to MCU Return Data
‘[’
MCU tested for BLE module function test
BLE normal operation, reply to 0xA0
0x5F
0xA0
CS
CS
Clear White List
Byte Index
MCU to BLE Command
‘]’
0x5B
CS
CS
BLE to MCU Return Data
‘[’
0xA4
Status Byte
MCU command BLE clear Whitelist
Status Byte: 0x00:BLE reply, Whitelist Clear Completed
0x01:BLE reply, Whitelist Cleanup failed
Read BLE Flash
Byte Index
MCU to BLE Command
BLE to MCU Return Data
Read BLE Flash
‘]’
‘[’
CS
data0
…
…
…
13
14
Data9
CS
indexL indexH
indexL indexH
data0
data0
…
…
…
13
Data9
Data9
14
CS
CS
0x58
Section Index
0xA7
Section Index
CS
CS
0x5A
0xA5
indexL indexH
indexL indexH
BLE 模組內可儲存資料 1200 筆
Flash 可存 1200 筆資料,每筆 10byte,index 範圍 0x0000~0x04AF
Write BLE Flash
Byte Index
MCU to BLE Command
BLE to MCU Return Data
‘]’
‘[’
BLE Flash writing area setting
Byte Index
MCU to BLE Command
‘]’
BLE to MCU Return Data ‘ [ ’
Form No:FT-73-01-10D
0x59
0xA6
華 廣 生 技 股 份 有 限 公 司
Check List
Doc. No.:
Subject:工程規格書/Engineering Specification
Rev.:
Project Code:
Model Name: BM300
Page:
Effective Date:
Section Index:
0:
1:
2:
Write BLE Flash End
Byte Index
MCU to BLE Command
BLE to MCU Return Data
Form No:FT-73-01-10D
‘]’
‘[’
0x57
0xA8
CS
CS
15 OF
華 廣 生 技 股 份 有 限 公 司
Check List
Subject:工程規格書/Engineering Specification
Doc. No.:
Rev.:
Project Code:
Model Name: BM300
Page:
Effective Date:
Form No:FT-73-01-10D
16 OF

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Create Date                     : 2016:11:01 08:46:55+08:00
Modify Date                     : 2016:11:01 08:46:55+08:00
Author                          : Lambert.Li
Subject                         : 
Page Count                      : 16
Page Layout                     : SinglePage
Page Mode                       : UseNone
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:2f8e48dc-a228-11e6-0000-c8136364dcbd
Producer                        : PDFCreator 2.3.0.103
Keywords                        : 
Creator Tool                    : PDFCreator 2.3.0.103
Document ID                     : uuid:2f8e48dc-a228-11e6-0000-c8136364dcbd
Format                          : application/pdf
Title                           : BT SPEC
Creator                         : Lambert.Li
Description                     : 
EXIF Metadata provided by EXIF.tools
FCC ID Filing: ADU-BM300

Navigation menu