Bissell 7350 User Manual POWER STEAMER Manuals And Guides L0809581
BISSELL Power Steamer Manual L0809581 BISSELL Power Steamer Owner's Manual, BISSELL Power Steamer installation guides
User Manual: Bissell 7350 7350 BISSELL POWER STEAMER - Manuals and Guides View the owners manual for your BISSELL POWER STEAMER #7350. Home:Vacuums & Floor Care Parts:Bissell Parts:Bissell POWER STEAMER Manual
Open the PDF directly: View PDF 
.
Page Count: 16
| Download | |
| Open PDF In Browser | View PDF |
USER'S
GUIDE
7350 SERIES
_i_ii!i_!_!i!i_i_i_i!i_i!ii!ii!ii!ii!ii!ii!i!!_i!_i_!_!_!!_!iSafety_nstructi_ns
and Care
AdditionalAccessories
ug120-4035
7350
708En.indd
1
8/21/08
4:22:04
PM
for buyinga BISSELLPROdrycarpetcleaner
We're glad you purchased a BISSELLPROdry carpet cleaner. Everything we know
about floor care went into the design and construction of _nls complete, higm
tech home cleaning system. By purchasing this product, ou are helping BISSELL
with our commitment to reducing our impact on the envlronmen_ _nrough an
expanding range of sustainable design efforts.
Your carpet cleaner is well made, and we back it with a limited one-year warranty.
We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you'll receive fast, considerate assistance.
My great-grandfather invented the floor sweeper in 1876. Today, BISSELLis a
global leader in the design, manufacture, and service of high quality homecare
products like your carpet cleaner.
Thanks again, from all of us at BISSELL.
Mark J. Bissell
President and Chief Executive Officer
2
ug120-4035
www.bissell.c0m
7350
708En.indd
800.237.7691
2
8/21/08
4:22:05
PM
SAFETYINSTRUCTIONS
Whenus_g anelectricalappliance,basic precautions
should be observed, includingthe following:
Readall instructionsbeforeusingyour PROdry
• Turnoff all controls before unplugging.
• Be extra careful when cleaning stairs.
• Close attention is necessarywhen used by or
near children.
• Donotuseaflammableor combLslJble
liquidtocleanafloor.
• Alwaysinstallfloat beforeany wet pick-upoperation.
/k WARNING:
To
reduce
tile
risk
of fire,electricshock,or injury:
• Do not immerse.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Useonly on surfaces moistenedby cleaning process.
Always connectto a properlygroundedoutlet.
SeeGroundingInstructions.
Unplug from outlet when not in use and before
conducting maintenance or troubleshooting.
Do not leave machinewhen it is plugged in.
Donotservicemachinewhenit ispluggedin.
Do not use with damaged cord or plug.
If applianceis notworking as it should,has been
dropped,damaged,left outdoors,or droppedinto
water,have it repairedat an authorizedServiceCenter.
Useindoors only.
Donotpullor carrybycord,usecordasa handle,close
dooron cord,pullcordaroundsharpcomersor edges,run
applianceovercord,or exposecordto heatedsurfaces.
Unplug by grasping the plug, not the cord.
Donothandleplugor appliancewithwet hands.
Donotputanyobjectintoapplianceopenings,usewith
blockedopening,or restrictairflow.
Do not expose hair,loose clothing, fingers or body
parts to openingsor moving parts.
Do not pick up hot or burning objects.
Do not pick up flammable or combustible materials
(lighter fluid, gasoline, kerosene, etc.) or use in the
presence of explosiveliquids or vapor.
Donotuseappliance
inanenclosed
spacefilledwithvapors
givenoffbyoilbasepaint,painthinner,somemothproofing
substances,
flammabledust,or olherexplosive
ortoxicvapors.
Donotpickuptoxicmaterial(chlorinebleach,
ammonia,draincleaner,
gasoline,etc.).
Do not modify the 3-prong grounded plug.
Do not allow to be used as a toy.
Do not use for any purpose other than described in
this User's Guide.
• Donotoperatetheapplianceunlessthe soleplateis
securelyassembledinthe locationprovided.
• Do not unplug by pulling on the cord.
• Useonlymanufacturer's
recommended
attachments.
• Useonlycleaningproductsformulatedby BISSELLfor
use inthis applianceto preventinternalcomponent
damage.Seethe cleaningfluidsectionof this guide.
• Keepopenings free of dust, lint, hair,etc.
• Do not point attachmentnozzleat people or animals
• Keepappliance on a levelsurface.
• Unplug before connecting TurboBrushCetool
www.bissell.com
_.
ug120-4035
7350
708En.indd
3
SAVETHESE
INSTRUCTIONS.
THISMODELISFORHOUSEHOLD
USEONLY.
Commercialuse of this unit voidsthe
manufacturer's warranty.
GROUNDING
INSTRUCTIONS
This appliancemustbe connectedto a grounded
wiring system.If it shouldmalfunctionor break
down,groundingprovidesa safe pathof least
resistancefor electricalcurrent,reducingthe riskof
electricalshock.The cordfor thisappliancehas an
equipment-grounding
conductoranda grounding
plug.It mustonly be pluggedinto an outletthat is
properlyinstalledandgroundedin accordancewith
all localcodesandordinances.
Groanded
Outlets
GroundingPin
A WARNING:Improper
connection
oftheequipment-grounding
conductor
canresultina riskofelectrical
shock.Checkwitha qualifiedelectrician
or servicepersonif youaren'tsureif the
outletis properlygrounded.
DONOTMODIFY
THEPLUG.
If itwill notfit theoutlet,havea
properoutletinstalledbya qualifiedelectrician.Thisapplianceisdesigned
foruseona
nominal120-voltcircuit,and hasa groundingattachmentplugthatlooksliketheplug
inthedrawingabove.Makecertainthatthe
applianceisconnected
toan outlethaving
thesameconfiguration
as theplug.Noplug
adaptershouldbeusedwiththisappliance.
800.237.7691
8/21/08
4:22:06
PM
Trigger
Rebase
CordWrap
TM
PowerSwitch
HoseSecure
StainTool
Cord
UpperHoseWrap
Assembly
Readyto use
Carry
Handle
Large,
EasyToManeuver
Wheels
Gen2
PowerTooF
M
•LowerBody
Assembly
Handle
[/ WARNING:
Tods Dial
TM
To reducethe risk of fire and electric
shockdueto intemalcomponentdamage,
useonlyBISSELLcleaningfluids
intendedfor usewith the deep cleaner.
Non-BISSELLcleaningsolutionsmay
harmthemachineand voidthewarranty.
PowerRdbr
Cleaning fluid
Keepplentyof genuineBISSELLFiberCleansingFormula on hand soyoucan cleanwheneverit fits
yourschedule.Alwaysuse genuineBISSELLdeepcleaningformulas. Non-BISSELLcleaningsolutions
may harmthe machineand will voidthe warranty.
TM
48 oz,BISSELL
FiberCleansing
Formulawith
Scotchgard
Protector
item # 0710
TM
TM
4
ug120-4035
48 oz, BISSELL 48 oz.BISSELL 48 oz.BISSB_L48 oz.BBSELL 42,67oz,BISSELL22 oz,
Multi Allergen PetOdorand
Natural
O_ange Lavender
Es_nce3XOonce_Ttrated BISSELL
Removal
SoilRemoval
Ex_act
Rormula Formula
%th
FiberCleansing
ToughStain
%thSc/stchgarU
_ Scotchgard
Formula
%th
ReCbane_
Formulawith
Formulawith
Scotchgard
Scotchgard
Protector
Protector
ScotchgarU
M
item #
item # 0740 item # 0750 Rotestor
0400
Protector
Protector
item # 0720
item # 0730
item # 0716
TM
TM
TM
TM
TM
www,bissell,com
7350
708En.indd
TM
TM
800.237.7691
4
8/21/08
4:22:25
PM
I
How to use this guide
WARNING:
Thisuser'sguide has beendesignedto help
youget the maximumsatisfactionfrom your
PROdrycarpet cleaner,You'llfind assembly
and operatinginstructions,safety precautions,
as well as maintenanceand troubleshooting
instructions,Pleaseread this user'sguide
thoroughlybeforeassemblingyour carpet
cleaner,
Do not plug in your cleaner
until you have completely
assembledit per the
following instructions
and are familiar with all
instructionsand operating
procedures.
Yourcarpetcleanercomesin threeeasyto
assemblecomponents:
• Handleassembly
• Upperhosewrap
• Lower bodyassembly
FourPhillips headscrewsare includedandcan
befound tapedtothe handleassembly.
Theonlytoolyouwill needto assembleyour
PROdryis a Phillipsheadscrewdriver.
1. Slide upper handleinto lower bodyassembly
and securewith 2 screws.
2.
Attach upperhosewrap using 2 screws.
3.
Wraphoseclockwisearoundthe upperand
lower hosewraps as shown on page 4. Be
sure to properlysecure grip into the notched
holder.
4.
Keephoselocked in place with the
secure latch.
5.
Wrapthe power cord as shown on page 4.
6.
Place OxyGen2PowerToolin the centertool
caddyand the tough stain tool on the hose
wand.
2b.
UpperHose
WrapScrews
JpperHandb
Screws
www.bissell,com
ug120-4035
7350
708En.indd
800.237.7691
5
8/21/08
4:22:30
PM
features of your BISSELLPROdrycarpet cleaner
YourBISSELLPROdrycarpetcleaneris a home
cleaningsystemthat usesa combinationof hot
tap water, BISSELLadvancedcleaningformula,
the innovativeTLRPowerRollerand suctionto
safelycleancarpetand area rugs.
TLR PowerRoller
TM
TheTLR PowerRolleris designedfor great
cleaningperformancewith fastdryingresults.It
Traps,Lifts andRemovesdirt anddebris.Unlike
traditionalcarpetcleaners,wherecleaningsolution is sprayeddirectlyintothe carpet,the TLR
PowerRollerabsorbsthe majorityof the spray
fromthe machine,meaningyourcarpet and
area rugsget cleanedand revitalized,while still
allowingyouto get back onthem in lessthan
30 minutes.Whenin the uprightposition,for
storageor tool use,the TLRPowerRolleris lifted offthe floor surfaceand heldin space. This
will also helpthe TLR PowerRollerdry between
uses. TheTLRPowerRollercan bewashedor
replacedas needed.
I
WARNING:
I
Toreducethe dskoffire,useonly
BISSELL
advanced
deepcleaning
formulaforfullsizemachines
inyour
carpetcleaner,
Useofcleaning
formulasthatcontainlemonor
pineoilmaydamagethisappliance
andvoidthewarranty.
Chemical
spotcleaners
orselvent-based
soil
removersshouki
notbeused.These
prednctsmay reactwiththeplasl_
materialsusedinyourdeepcleaner
causingcracking
or pitUng.
Ready ToolsTM Dial
TheReadyToolsfeatureallowsyouto choose
betweenFLOOR
CLEANING
orcleaningwithTOOLS
simplybyturningthe dial.TheTOOLSsetting
allowsfor abovefloorcleaningof upholstery,
stairs,creasesalongbaseboardsandotherhard
toreachareas.Simplychoosethe toolthat is
appropriate
forthe job,attachitto the flexible
hoseandyouare readyto go.
Oxy Gen2PowerTool
TheOxyGen2PowerToolis an advancedstain
fightingtool.ByaddingOxyGen2multi-purpose
formulato the tool,toughstainssuchas coffee,
juice,colaand redwineare easierto cleanup.
Thetoolcan storereadyto usewith the
OxyGen2formulain it.
Easycarry handle
Locatedinthe backof the machine,the easycarry
handlemakesit easytocarrythe machine.Referto
page4 forlocation.
6
ug120-4035
www,bissell,com
7350
708En.indd
6
800.237.7691
8/21/08
4:22:30
PM
Operation
Before you clean
1.
If desired,movefurniture to anotherarea if
cleaningan entire room.
2,
Vacuum area with a dry vacuumcleaner
beforecleaning
3.
Planyour cleaning routeto leavean exit
path. It is best to begincleaningthe corner
farthest from your exit
Fill the clean/solution tank
Removethe clean/solutionfrom the baseof the
machineby pullingup andout from the back.
Youcanalso detentthe handleandpull the
tank straightup if youdesire.
1,
2,
Unscrewthe blackcapandredinsert,Remove.
3.
Fillthetankupto the FILLLINEwith hot
tap water.
4,
Add 3 ounces of formula (Alwaysuse
genuineBISSELLformulas to maximize
cleaningandfor the safetyof your machine).
OR If using a BISSELL3X Concentrate
add 1 ounce of formula.
5,
Replacethe cap and insert andtighten by
turning clockwise.
6.
Replacethe clean/solutiontank back into the
machine.Be sure that the cap is seated in
the receiver.
Carpetcleaning
1.
Makesure the ReadyToolsDialis in the
FLOORCLEANING
position.
2.
Plugthe PROdryinto the properoutlet and
turn the powerON( I ) usingthe switch inthe
back.
3,
With yourfoot, pressthe gray handle release
leverlocated on the back of
the unit. Takecareto noticethe waythe
machinefloats forward.
4,
Whilepressingthe spraytrigger make 1
forward wet pass and another 1 back.
Repeatonce and moveon to the next
sectionof carpet or area rug to be cleaned.
Takecare not to run over loose objectsof
the edgesof area rugs.
www.bissell,com
ug120-4035
7350
708En.indd
800.237.7691
7
8/21/08
4:22:35
PM
Emptythe dirty watertank
1,
Whenmedirtywatertank levelreachesme FULLline,
whenmefloathipsorwhenfinishedcarpetdeaning,
turnpowerswitchOFF(O).
2,
Removedirty water tank by lifting straight up
andcarry it to the sink or whereveryou plan to
dump the dirty water.
3.
Removethe tetheredcap on the rearof
the tank.
4.
Pouroutme dirty water,rinsetank andreplace
the cap.
5.
Tocontinuecarpetcleaningreferbackto
page7 beginningwith "Fill the clean/solution
tank."
WARNING:
To reducethe risk of fire
and electricshockdue to
internalcomponent
damage,useonly BISSELL
cleaningfluids intendedfor
use with the carpet cleaner.
Non-BISSELLcleaning
solutionsmay harm the
machineand void
the warranty.
If cleaningis complete,refertothe "Maintenance
andcare"sectionon page11.
Pretreating(optional)
1,
Pretreating (optional)
Pretreating
isrecommended
toimprove
cleaning
effectiveness
forheavily
soiled
carpetinhightraffic
areassuchasentrywaysandhallways.
Please
keep
inmindthatpretrea_ng
will wetthecarpet
andcould
impactdry_me.
Topretreat:
A. Usingthe BISSELLToughStain
Pre-cleaner,generouslyspray evenlyover
soiled area,do not overwet.
B. Wait3-5 minutesbeforecleaning.
C. Cleanas normalusingyourBISSELL
PROdry,
followingme instructionson page7.
ReadyTools
TM (cleaning
withattachments)
YourPROdrycarpetcleanercomesequippedwith
a hoseandat leasttwo attachmentsfor cleaning
stairs,upholstery,
stainsand more.
Important!If usingthe machineto clean
upholstery,
checkupholsterytags.
1.
Checkmanufacturer'stag beforecleaning."W"
or "WS" on the tag meansyou can use your
PROdry.If the tag is codedwith "X" or "S"
(with a diagonalstrike through),or says"Dry
Clean Only,"do not proceed.Donot use on
velvet or silk. If manufacturer'stag is missing
or not coded, check with your furniture dealer.
Manufacturer's
tag
800,237.7691
ug120-4035
7350
708Enindd
8
8/21/08
4:22:37
PM
Ready ToolsTM(continued)
2.
Checkforcolorfasb_ess
in an inconspicuous
place,
3.
If possible,check upholsterystuffing.
Coloredstuffing may bleedthrough fabric
when wet.
4.
Planactivities to give upholsterytime to dry.
5.
Vacuumthoroughlyto pickup loosedebrisand
pethair.Usea vacuumwi1_a brushattachment
anda crevicetooltodeaninfabricfoldsandtufts.
6.
Tobegincleaning with attachments,follow
the instructionson page 7 for filling the
clean/solutiontank.
7.
Setthe ReadyTools
dialto the TOOLS
setlJng.
Thiswill allowfor suclJon
from the hose.
8.
Attachthe desiredcleaningtool to the endof
the hose.
9,
Cleanby pressingthe trigger to spray
solutiononto the area to be cleaned.Slowly
movethe tool back andforth overthe soiled
surface.Releasethe trigger to suctiondirty
water.Continueto clean in the area,working
in small sections,until dirt is removed.
Caution:Do Not Overwet.
10. Whenfinishedcleaning, removeand rinse
tool(s)in clean,runningwater.
11. It is recommendedthat you suctionclean
water from the tap to rinseout the hose.
12. Beforewrappinghoseonto tool rack, lift end
of hoseandstretch out to ensureall water is
clearedfrom hose.
13. Wrapflex hosearoundtool rack.
14. Emptycollectiontank and rinseout,
following instructionson page 10.
15. If the ReadyTools
dial becomesdifficult to
turn, the diverterassemblythat holdsthe dial
may needto be cleaned.Toclean,flush hot
waterthrough the nozzle.Makesurethe dial
is set to FLOORCLEANING.
www.bissell,com
ug120-4035
7350
708En.indd
800,237.7691
9
8/21/08
4:22:39
PM
Oxy Gen2PowerTool
TM
Tousethe OxyGen2PowerTool:
1.
Pullout the rubber stopper in the tank.
2.
Fill with OxyGen2®formula.
3.
Replacethe rubber stopperand attach the
tool to the hosegrip.
4.
pper
Referto page9 "ReadyTools"steps 9-15.
andcare
Machinecare
Forbestresults,a few simplestepscan assure
yourmachineiswell maintainedafteryour
cleaningis complete.
1.
Turnpower switch OFF(0). Unplugthe
machineandwrap the powercord.
2.
After emptyingthe collectiontank, rinseit
with runninghot tap water,takingcareto
cleanall aroundthe interior.
3.
Cleanout the lintscreen if necessaryby
wiping cleanany visibleresidue.
4.
Replacethe collectionwatertank onthe
machine.
4.
Any loose hairor debriscan be pulledfrom
the TLR PowerRollerandthrown away.
5.
Tocleanthe attachments,removefrom hose
andrinseinclean,runningwater.Drybefore
storing.Cleanthe hosebysuc'doning
clean
waterfrom t_etap.Beforewrappingbackon
machine,lift endof hoseandstretchoutto
ensureall wateris clearedfrom hosewhilestill
suctioning.
6.
Wipethe machine'sexteriorwith a soft cloth
andstore properly,referto page 11.
10 www,bissell,com
ug120-4035
7350
708En.indd
10
LintScreen
800,237,7691
8/21/08
4:22:41
PM
Maintenanceand care
Cleaning/replacingthe TLR Power Roller
1.
Turnpower switch to OFF(O) and unplug
the machine.
2,
Removebothtanks, detentthe handle and
turn the machineon its back.
3.
Removethe 6 screws from the sole plate
using a Phillipshead screwdriver,set 6
screws and sole plateaside.
4.
Turnthe machineon its side so the cord side
is againstthe floor.
5.
Removethe 2 screws from the belt guard
and set aside
Note: These2 screws are the sameas the 6
sole platescrews).
Removethe top of the belt guard.
6.
Unhookthe belt from the TLR PowerRoller
and slidethe roller down through the hole
in the belt guard bottom.Slidethe roller up 6.
off the metal dowel (which is attachedto the
swing arm).
7.
Cleanthe TLR PowerRollerby rinsing with
hot water and mild soap.Allow to dry before
replacingif desired.
8.
Toreplace,slidethe TLRPowerRolleron to
the metal dowel with the taller cog at the
top. Pushthe taller cog of the roller back up 8a.
through the hole in the belt guard bottom
and re-attach the belt. Placethe belt guard
top into positionoverthe bottom half and
tighten togetherwith 2 screws.
9.
Turnthe machineon to its back and
attach the secondswing arm. Be sure the
arm is properlyin place both on the TLR
PowerRollerand in the base. Pushthe TLR
PowerRollerdown so it is nestedunderthe
nozzle.
8c.
10. Re-attachthe sole plate using the 6 screws.
Machine storage
Put the unit away in a closetor basementfor
the next use. Store cleanerin a protected,dry
area.Since this product useswater, it must not
be storedwhere there is a danger of freezing.
Freezingwill damage internal componentsand
voidthe warranty.
www.bissell.com
_
ug120-4035
7350
708Enindd
11
800.237.7691
8/21/08
4:22:50
PM
WARNING:
ig
ReducedSprayORNoSpray
Possible cause
Remedies
1.
Clean/solutiontank may be empty
1. Turnpowerswitch OFF;Refilltank with
:i¸¸ : :: /:
2.
Clean/solutiontank may not be seatedproperly
2. Turnpowerswitch OFF;removetank
and reseat
3.
Pump may havelost prime
cleanhot tapwater andformula
Turnpowerswitch OFF( 0 ); after 1 minute
turn ON( I ) and depressspraytrigger
Besure thereis cleaningformulain the
clean/solutiontank, it will make the
machineprimefaster
No spraythroughthe hose
Possiblecause
1.
Pump may not be primed
Remedies
1. TurnReadyTools
dial to FLOORCLEANING
and depresstriggerfor a few a seconds
until you see suctioncomingup the nozzle
TurnReadyTools
dial backto TOOLS
TLRPowerRollerDoesNot Turn
Possible cause
1. The brushbelt is off or broken
Remedies
1. Referto page 11,steps 1-5 for instructions
on how to accessthe belt
2. Look at the belt and check for breakage
or misalignment on the cogs. IF there is
no evidence, replaceall partsfollowing
steps 8-11.
3. In the event your belt is broken,a
replacementbelt may be ordered at
www.bissell.com or by calling BISSELL
consumer servicesat 800-237-7691.
Referto the partslist on page14. Complete
installation instructionswill come with
the replacementbelt
Machinenot picking up solution
12
ug120-4035
Possible cause
Remedies
1.
Collectiontank may not beseatedproperly
1. Turnpowerswitch OFF;reseattank
2.
ReadyToolsdial may be onTOOLS
2. TurnReadyTools
dial to FLOORCLEANING
3.
Floatmay haveshut off
3. Turnpowerswitch OFFand emptytank if
necessary.If tank is not full,wait
30 secondsandturn powerswitchON
4.
Collectiontank may befull
4. Turnpowerswitch OFFand emptytank
www.bissell.com
7350
708En.indd
12
800,237.7691
8/21/08
4:22:50
PM
Othermaintenanceor servicenotincludedin the manualshouldbeperformedbyan
authorizedservicerepresentative.
Thank youfor selecting a BISSELLproduct.
I Pleasedonotreturnthisproductto thestoreI
Foranyques'dons
orconcerns,
BISSB_L
ishappytobeofse_ce.Contact
usdirectly
at 1-800-237-7691.
ConsumerServices
For information about repairs or replacement parts, or questions about your warranty, call:
BISSELLConsumerServices
1-800-237-7691
Monday - Friday
8 a.m.-
10 p.m. EST
Saturday
9 a.m.-
8 p.m. EST
Or write:
BISSELLHOMECARE,
INC
POBox3606
GrandRapidsMI49501
ATFN:ConsumerServices
Or visitthe BISSELLwebsite - www, bissell,com
WhencontactingBISSELL,havemodelnumberof unit available.
Pleaserecordyour ModelNumber:
Pleaserecordyour PurchaseDate:
NOTE:
Pleasekeepyouroriginal
salesreceipt.
It provides
proofofdateofpurchase
intheevent
ofa warranty
claim.SeeWarranty
onpage16for details.
www.bissell,com
ug120-4035
7350
708En.indd
_,
13
800,237.7691
8/21/08
4:22:50
PM
dacement parts
Item
1
2
3
4
5
6
7
8
[i
Z[
'!{
ug120-4035
Part Name
CollectionTankAssembly
CollectionTankCapw/Tether
Clean/Solution
TankAssembly
SprayTip
SprayTip Cover
TLRPowerRoller
Assembly(2 pack)
ReplacementBrushBelt(with instructions)
OxyGen2PowerTool
Cap
'," [
[ }i}}i[
14
Part No.
203-7204
203-7206
203-7207
203-7211
203-7210
203-7223
203-7226
203-7241
;i
i[}1i ::: [ F_
www,bissell,com
7350
708En.indd
14
800.237.7691
8/21/08
4:23:01
PM
Theseitemsare availablefor purchaseas accessoriesforyourBISSELLPROdry:
Topurchasecall1-800-237-7691or visit www.bissell.com.
Item
2
3
4
5
Part No.
203-7240
203-7238
203-6653
203-6654
203-6652
Part Name
OxyGen2PowerTool
3" ToughStainTool
4" UpholsteryTool
6" StairTool
PoweredTurboBrush®
HandTool
6
7
8
203-7240
203-6655
210-3040
Spraying2-in-1 CreviceTool
SprayingCreviceTool
MeshToolStorageBag(BagOnly)
TM
CleaningFormula:Referto bottomof page4 of this guidefor a full selectionof cleaning
formula availablefor purchase.
Fora completelistof replacementparts,cleaningformulas,
andaccessories
availablefor yourBISSELL
deepcleanerplease
visitwww.bissell.com
orcontactBISSELL
ConsumerServicesat
800.237.7691.
www.bissell,com
ug120-4035
7350
708En.indd
_,
15
800,237,7691
8/21/08
4:23:07
PM
_rranty
- BISSELLPROdry
This warranty givesyou specific legal rights, and you may also have other rights wnlcn may vary from state to
state. If you needadditional instruction regarding this warranty or nave auesttonsregardtngwhat ttmay cover
please contact BISSELLConsumer Services by E-mail, telephone, or regular mal as describedbelow
LimitedOneYearWarranty
Subjectto the *EXCEPTIONSAND EXCLUSIONSidentified below, upon receipt of the product BISSELL
Homecare, Inc. will repair or replace (with new or remanufactured components or products), at BISSELL'soption,
free of chargefrom the date of purchase by the original purchaser,for one year any defective or
malfunctioning part.
See information below on "If your BISSELLproductshould require service".
This warrantyappliesto productusedfor personal,and not commercialor rentalservice.This warrantydoes notapply
to fans or routinemaintenancecomponentssuch asfilters, belts,or brushes.Damageor malfunctioncausedby negligence,abuse,neglect,unauthorizedrepair,or any other use not in accordancewith the User'sGuideis not covered.
If yourBISSELLproduct shouldrequireservice:
Contact BISSELLConsumer Services to locate a BISSELLAuthorized Service Center in your area.
If you need information about repairs or replacement parts, or if you have questions about your warranty,
contact BISSELLConsumer Services.
Website or E-mail:
www.bissell.com
Usethe "Customer Services" tab.
Or Call:
BISSELLConsumer Services
1-800-237-7691
Monday - Friday8 a.rn. - 10 p.m. ET
Saturday 9 a.rn. - 8 p.m. ET
Or write:
BISSELLHomecare Inc.
PO Box 3606
Grand Rapids M149501
ATTN:Consumer Services
BISSELLHOMECARE,
INC.IS NOTLIABLEFORINCIDENTAL
ORCONSEQUENTIAL
DAMAGESOFANYNATURE
ASSOCIATED
WITHTHEUSEOFTHISPRODUCT.
BISSELUSLIABILITY
WILLNOTEXCEED
THEPURCHASE
PRICEOFTHE
PRODUCT.
Some states do not allow the exclusionor limitation of incidentalor consequentialdamages, so the above
limitation or exclusionmay not apply to you.
*EXCEPTIONSAND EXCLUSIONS
FROMTHETERMSOFTHELIMITEDWARRANTY
THISWARRANTY
ISEXCLUSIVE
ANDIN LIEUOFANYOTHERWARRANTIES
EITHER
ORALORWRITrEN.ANYIMPLIEDWARRANTIES
WHICHMAYARISEBYOPERATION
OFLAW,INCLUDING
THEIMPLIEDWARRANTIES
OFMERCHANTABILITY
AND
FITNESS
FORA PARTICULAR
PURPOSE,
ARELIMITED
TOTHEONEYEARDURATION
FROMTHEDATEOFPURCHASE
ASDESCRIBED
ABOVE.
Somestatesdo not allow limitationson how long an impliedwarrantylasts,8othe
abovelimitationmay not applyto you.
@2008 BISSELLHomecare, hc
Grand Rapids,Michigan
All rights reserved.Prhted in China
Part Number 120-4035
Rev 7/08
Visit our website at: www.bissell.com
Scotehgardis a trademarkof 3M
16
ug120-4035
www.bissell.com
7350
708En.indd
16
800.237.7691
8/21/08
4:23:07
PM
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 16 Page Layout : SinglePage Page Mode : UseNone Producer : Goby Monitor Application version 4, 0, 0, 13 Create Date : Sun Oct 12 04:12:53 2008 Author : Title : Subject :EXIF Metadata provided by EXIF.tools