Blue Ox RT-WAR RodenTerminator Wireless Transmitter and RodenTerminator Wireless Alert Receiver User Manual instruction manual side 2
BlueOX Industrial Co., Limited RodenTerminator Wireless Transmitter and RodenTerminator Wireless Alert Receiver instruction manual side 2
Blue Ox >
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2086428 |
| Application ID | gkQwRcB16m3nljeB1hk6Lw== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 163.66kB (2045690 bits) |
| Date Submitted | 2013-09-30 00:00:00 |
| Date Available | 2013-09-30 00:00:00 |
| Creation Date | 2013-07-12 20:49:12 |
| Producing Software | Adobe PDF library 9.00 |
| Document Lastmod | 2013-09-09 17:28:08 |
| Document Title | instruction manual side 2 |
| Document Creator | Adobe Illustrator CS4 |
4) Gently pull the cable out of the lid far enough to make the connection in the next step. 3) Find the ribbon cable inside the lid. If there is a piece of tape holding the cable in place remove it to free the cable. Adjust the transmitter switch to the same setting as the receiver. 1 or 2 or 3 6) Gently tuck the cable back into the lid and put the W.A.R transmitter in place with the screw holes aligned. Install the included screws. 5) Insert the cable connector into the W.A.R. transmitter. It will only insert if the tab and notch are aligned. Remove these 2 screws Look for the tab and notch 2) Use a phillips screwdriver to remove the two screws holding the cover plate in place. Note: Concrete walls or large obstructions can reduce the range of the W.A.R unit. Pick a place as close to your Rodent Terminator as possible for best results. Also, pick a frequency not being used by another Rodent Terminator or other device to avoid interference. You can now place your trap anywhere up to100 feet away from the W.A.R. receiver and know what’s happening with your trap at all times. When the lid gets closed, the lights on both the transmitter and receiver will flash rapidly green and red. This lets you know that the transmitter and receiver successfully paired and are communicating. Now, both the trap and the W.A.R. receiver will display the same information about battery condition, trap readiness and kill alert. Bait and set your Rodent Terminator just like you normally do according to its instrucions. 1) Remove all of the batteries from your Rodent Terminator before you start. 7) Plug the included AC adapter into the W.A.R. receiver and then plug into a wall outlet. You’re done. Time to wage W.A.R ! Remove tape Instrucciones (Español) Instructions (Francés) 7) Plug the included AC adapter into the W.A.R. receiver and then plug into a wall outlet. You’re done. Time to wage W.A.R ! Remove tape 1) Remove all of the batteries from your Rodent Terminator before you start. Bait and set your Rodent Terminator just like you normally do according to its instrucions. 2) Use a phillips screwdriver to remove the two screws holding the cover plate in place. Look for the tab and notch Remove these 2 screws 5) Insert the cable connector into the W.A.R. transmitter. It will only insert if the tab and notch are aligned. 3) Find the ribbon cable inside the lid. If there is a piece of tape holding the cable in place remove it to free the cable. 4) Gently pull the cable out of the lid far enough to make the connection in the next step. 6) Gently tuck the cable back into the lid and put the W.A.R transmitter in place with the screw holes aligned. Install the included screws. Adjust the transmitter switch to the same setting as the receiver. 1 or 2 or 3 When the lid gets closed, the lights on both the transmitter and receiver will flash rapidly green and red. This lets you know that the transmitter and receiver successfully paired and are communicating. Now, both the trap and the W.A.R. receiver will display the same information about battery condition, trap readiness and kill alert. You can now place your trap anywhere up to100 feet away from the W.A.R. receiver and know what’s happening with your trap at all times. Note: Concrete walls or large obstructions can reduce the range of the W.A.R unit. Pick a place as close to your Rodent Terminator as possible for best results. Also, pick a frequency not being used by another Rodent Terminator or other device to avoid interference. FCC ID: 2AAY6-RT-WAR This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment。 Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : 3.1-702 Format : application/pdf Title : instruction manual side 2 Metadata Date : 2013:09:09 17:28:08+08:00 Modify Date : 2013:09:09 17:28:08+08:00 Create Date : 2013:07:12 20:49:12-07:00 Creator Tool : Adobe Illustrator CS4 Thumbnail Width : 256 Thumbnail Height : 180 Thumbnail Format : JPEG Thumbnail Image : (Binary data 23050 bytes, use -b option to extract) Instance ID : uuid:d4bf5548-edc5-44ed-bf16-2963ab298fa4 Document ID : xmp.did:01E0C3DABAEAE21181BEF07405DC0854 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:FEDFC3DABAEAE21181BEF07405DC0854 Derived From Document ID : xmp.did:FEDFC3DABAEAE21181BEF07405DC0854 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : converted, saved, converted, converted, saved, saved, saved, saved, saved, converted, saved, converted, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, converted, saved, converted, saved, converted, saved, converted, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:D27F11740720681191099C3B601C4548, xmp.iid:F97F1174072068118D4ED246B3ADB1C6, xmp.iid:FA7F1174072068118D4ED246B3ADB1C6, xmp.iid:EF7F117407206811A46CA4519D24356B, xmp.iid:F07F117407206811A46CA4519D24356B, xmp.iid:F77F117407206811BDDDFD38D0CF24DD, xmp.iid:F97F117407206811BDDDFD38D0CF24DD, xmp.iid:FA7F117407206811BDDDFD38D0CF24DD, xmp.iid:FB7F117407206811BDDDFD38D0CF24DD, xmp.iid:FC7F117407206811BDDDFD38D0CF24DD, xmp.iid:FD7F117407206811BDDDFD38D0CF24DD, xmp.iid:FE7F117407206811BDDDFD38D0CF24DD, xmp.iid:B233668C16206811BDDDFD38D0CF24DD, xmp.iid:B333668C16206811BDDDFD38D0CF24DD, xmp.iid:B433668C16206811BDDDFD38D0CF24DD, xmp.iid:F77F11740720681197C1BF14D1759E83, xmp.iid:F87F11740720681197C1BF14D1759E83, xmp.iid:F97F11740720681197C1BF14D1759E83, xmp.iid:FA7F117407206811B628E3BF27C8C41B, xmp.iid:FF7F117407206811B628E3BF27C8C41B, xmp.iid:07C3BD25102DDD1181B594070CEB88D9, xmp.iid:F87F1174072068119098B097FDA39BEF, xmp.iid:F77F117407206811BB1DBF8F242B6F84, xmp.iid:F97F117407206811ACAFB8DA80854E76, xmp.iid:0180117407206811834383CD3A8D2303, xmp.iid:01E540664A3DDD11BD33D3EB8D3A1068, xmp.iid:6B6AE2A5723EDD11A6F1BABF7C5A7A51, xmp.iid:FEDFC3DABAEAE21181BEF07405DC0854, xmp.iid:01E0C3DABAEAE21181BEF07405DC0854 History When : 2008:04:17 14:19:15+05:30, 2008:05:15 16:23:06-07:00, 2008:05:15 17:10:45-07:00, 2008:05:15 22:53:33-07:00, 2008:05:15 23:07:07-07:00, 2008:05:16 10:35:43-07:00, 2008:05:16 10:40:59-07:00, 2008:05:16 11:26:55-07:00, 2008:05:16 11:29:01-07:00, 2008:05:16 11:29:20-07:00, 2008:05:16 11:30:54-07:00, 2008:05:16 11:31:22-07:00, 2008:05:16 12:23:46-07:00, 2008:05:16 13:27:54-07:00, 2008:05:16 13:46:13-07:00, 2008:05:16 15:47:57-07:00, 2008:05:16 15:51:06-07:00, 2008:05:16 15:52:22-07:00, 2008:05:22 13:28:01-07:00, 2008:05:22 16:23:53-07:00, 2008:05:28 16:45:26-07:00, 2008:06:02 13:25:25-07:00, 2008:06:09 14:58:36-07:00, 2008:06:11 14:31:27-07:00, 2008:06:11 22:37:35-07:00, 2008:06:18 22:24:01+07:00, 2008:06:19 20:30:34-07:00, 2013:07:11 23:18:22-07:00, 2013:07:12 20:49:07-07:00 History Software Agent : Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4 History Changed : /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, / History Params : from application/vnd.adobe.illustrator to application/vnd.adobe.illustrator Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : False N Pages : 1 Max Page Size W : 12.000000 Max Page Size H : 7.500000 Max Page Size Unit : Inches Font Name : MyriadPro-SemiboldIt, MyriadPro-Semibold, MyriadPro-It, MyriadPro-Regular Font Family : Myriad Pro, Myriad Pro, Myriad Pro, Myriad Pro Font Face : Semibold Italic, Semibold, Italic, Regular Font Type : Open Type, Open Type, Open Type, Open Type Font Version : Version 2.037;PS 2.000;hotconv 1.0.51;makeotf.lib2.0.18671, Version 2.037;PS 2.000;hotconv 1.0.51;makeotf.lib2.0.18671, Version 2.037;PS 2.000;hotconv 1.0.51;makeotf.lib2.0.18671, Version 2.037;PS 2.000;hotconv 1.0.51;makeotf.lib2.0.18671 Font Composite : False, False, False, False Font File Name : MyriadPro-SemiboldIt.otf, MyriadPro-Semibold.otf, MyriadPro-It.otf, MyriadPro-Regular.otf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Colorants Tint : 100.000000 Swatch Groups Group Name : Brights Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 60.000002 Swatch Groups Colorants Magenta : 90.000004 Swatch Groups Colorants Yellow : 0.003099 Swatch Groups Colorants Black : 0.003099 Producer : Adobe PDF library 9.00 Page Count : 2 Creator : Adobe Illustrator CS4EXIF Metadata provided by EXIF.tools