Bolutek Electronical Technology MESH1010D13 MESH-1010-D_V1.3 User Manual BLK MD BC04 B

Download:
Mirror Download [FCC.gov]
Document ID	3017589
Application ID	O0drZVSERwcuelqLx58qLg==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	148.67kB (1858405 bits)
Date Submitted	2016-06-04 00:00:00
Date Available	2016-06-04 00:00:00
Creation Date	2016-05-27 14:01:41
Document Lastmod	2016-06-03 17:13:06
Document Title	BLK-MD-BC04-B蓝牙模块
Document Creator	WPS Office
Document Author:	pc

BOLUTEK MESH-1010-D MESH MODULE
MESH-1010-D MESH MODULE
SPECIFICATION
V1.2
20160413
TEL：0755-26509941
WEB：www.bolutek.com
Page 1 of 10
BOLUTEK MESH-1010-D MESH MODULE
1．Overview
MESH-1010-D MESH module Shenzhen BOLUTEK
Electronics Technology Co., Ltd. is designed for data
transmission and intelligent MESH build, using
Qualcomm chip solution, compliant with the Bluetooth
V4.0 specification.
This module uses 2.0mm pitch pin connections, low
cost, small size, low power consumption, high receive
sensitivity, easy to use and flexible, etc., can be composed
of Mesh networks, network between each module.
2. Feature
Bluetooth protocol：Bluetooth V4.0
Power level：Class 2
Operating frequency：2.402~2.480GHz ISM band
Acuity：-80dBm<0.1%BER
Support Agreement：DATA_SPEC、CTS_SPEC、GLS_SPEC、TPS_SPEC、BPS_SPES、
HRS_SPEC、 HIDS_SPEC、LLS_SPEC、PASS_SPEC
Power supply：2.7~3.6V
Standby Current consumption：<50uA
Operating current consumption：≤50mA
Contour Dimension： 30.0mm x 14.0mm x 2.2 mm
Low power consumption, microamp operating current
Ultra-low voltage power supply, you can use 3V button battery
Support V4.0 Bluetooth protocol stack：ATT,GATT,SMP,L2CAP,GAP
Support CSR Mesh networking, the network can have up to 65,535 devices, you can
control two yellow and white lights.
3. Application Fields
TEL：0755-26509941
WEB：www.bolutek.com
Page 2 of 10
BOLUTEK MESH-1010-D MESH MODULE
MESH network node apparatus,
MESH networking background lights, wall lights,, ceiling lights,
MESH smart home, lighting control, lighting color temperature control,
Household and leisure equipment, such as remote controls, toys,
Office supplies equipment such as printers, scanners, etc.,
MESH low-power ecosystem,
Phone peripheral accessories,
Other Human Interface Device
……
4. Block Diagram
5．Contour Dimension
Type
Size
MESH-1010-D
30.0mm x 14.0mm x 2.2mm
TEL：0755-26509941
WEB：www.bolutek.com
Page 3 of 10
BOLUTEK MESH-1010-D MESH MODULE
TEL：0755-26509941
WEB：www.bolutek.com
Page 4 of 10
BOLUTEK MESH-1010-D MESH MODULE
6.Pin Configurations
Pin NO.
10
11
12
13
14
Name
GND
3V3
PWM2
PWM1
SYNC
TX
RX
CLK
CSB
MOSI
MISO
SPI_EN
GND
3V3
I/O
GND
IN
IN/OUT
IN/OUT
OUT
IN
IN/OUT
IN/OUT
IN/OUT
IN/OUT
IN
GND
IN
TEL：0755-26509941
FUNCTION
Ground
+3.3V Supply
Programmable Input/Output Line(PIO4)/Warm PWM Output
Programmable Input/Output Line(PIO3)/Cool PWM Output
not connected
UART Data Output
UART Data intput
Programmable Input/Output Line(PIO5)/SPI Clock
Programmable Input/Output Line(PIO6)/SPI CSB
Programmable Input/Output Line(PIO7)/SPI_MOSI
Programmable Input/Output Line(PIO8)/SPI_MISO
SPI Enable（active high）
Ground
+3.3V Supply
WEB：www.bolutek.com
Page 5 of 10
BOLUTEK MESH-1010-D MESH MODULE
7.Application Circuit Diagram
Note: This applicationcircuitfor theBluetoothserial portcircuitry, such as theneed for other
application, please contacts Bolutek.
TEL：0755-26509941
WEB：www.bolutek.com
Page 6 of 10
BOLUTEK MESH-1010-D MESH MODULE
TEL：0755-26509941
WEB：www.bolutek.com
Page 7 of 10
BOLUTEK MESH-1010-D MESH MODULE
8. Electrical Characteristics
min
Typ
max
Power Supply
1.8V
3.3V
3.6V
I/O interface Voltage
-0.4V
3.6V
Storage temperature
-40°C
85°C
Operating temperature
-30°C
85°C
9.Electric current
10.Layout Announcements
1.MESH-1010-D MESH module serial level should be 3.3 V, if the connection and
5Vlevel system need to increase the level conversion chip.
2.MESH signal is highly affected by the surrounding,such as trees, metal, wall can have
certain absorption on the bluetooth signal or block, so the installation is not recommended
in the metal case.
3.Due to metal will weaken the function of antenna, it is suggested that Lay in the module
board, don't lay GNDand a line under the antenna module, it is best to hollow out.
TEL：0755-26509941
WEB：www.bolutek.com
Page 8 of 10
BOLUTEK MESH-1010-D MESH MODULE
8. Electrical Characteristics
min
Typ
max
Power Supply
1.8V
3.3V
3.6V
I/O interface Voltage
-0.4V
3.6V
Storage temperature
-40°C
85°C
Operating temperature
-30°C
85°C
9.Electric current
10.Layout Announcements
1.MESH-1010-D MESH module serial level should be 3.3 V, if the connection and
5Vlevel system need to increase the level conversion chip.
2.MESH signal is highly affected by the surrounding,such as trees, metal, wall can have
certain absorption on the bluetooth signal or block, so the installation is not recommended
in the metal case.
3.Due to metal will weaken the function of antenna, it is suggested that Lay in the module
board, don't lay GNDand a line under the antenna module, it is best to hollow out.
TEL：0755-26509941
WEB：www.bolutek.com
Page 8 of 10
BOLUTEK MESH-1010-D MESH MODULE
11. FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions: 1) this device may not cause harmful interference, and 2) this device must accept
any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
--Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
If the FCC identification number is not visible when the module is installed inside another device,
then the outside of the device into which the module is installed must also display a label
referring to the enclosed module. This exterior label can use wording such as the following:
“Contains Transmitter Module FCC ID: 2AB4G-MESH1010D13. Or Contains
FCC ID:2AB4G-MESH1010D13”
When the module is installed inside another device, the user manual of this device must contain
below warning statements; 1. This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful interference. (2)
This device must accept any interference received, including interference that may cause
undesired operation. 2. Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment. The devices
must be installed and used in strict accordance with the manufacturer's instructions as described
in the user documentation that comes with the product.
TEL：0755-26509941
WEB：www.bolutek.com
Page 9 of 10
BOLUTEK MESH-1010-D MESH MODULE
12. Contact us
Shenzhen Bolutek Technology Co.,Ltd.
Addr:4th floor,Building5,Area A, the Internet Industry base of BaoAn District,
Shenzhen, Guangdong, China
Tel: 86-755-26509941
Fax: 86-755-26509942
Email: sales@bolutek.com
http://www.bolutek.com
TEL：0755-26509941
WEB：www.bolutek.com
Page 10of 10

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Creator                         : pc
Description                     : 
Title                           : BLK-MD-BC04-B蓝牙模块
Comments                        : 
Company                         : 
Source Modified                 : D:20160527140141+06'01'
Create Date                     : 2016:05:27 14:01:41+06:00
Creator Tool                    : WPS Office
Modify Date                     : 2016:06:03 17:13:06+08:00
Metadata Date                   : 2016:06:03 17:13:06+08:00
Keywords                        : 
Producer                        : 
Document ID                     : uuid:9dbe6dc2-5145-4fb1-9c54-97913c9020fb
Instance ID                     : uuid:aa6b8dad-e32d-4c3f-8f51-9c7a097473e0
Page Count                      : 11
Author                          : pc
Subject                         : 
Trapped                         : false

EXIF Metadata provided by EXIF.tools