Boost Auto Parts 9906 Wireless charger modules User Manual LePower Limited

Download:
Mirror Download [FCC.gov]
Document ID	3974935
Application ID	NPevxrFz1Z/DVMTbY8US+g==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	158.95kB (1986854 bits)
Date Submitted	2018-08-23 00:00:00
Date Available	2018-08-23 00:00:00
Creation Date	2018-08-20 11:33:51
Producing Software	Adobe PDF library 15.00
Document Lastmod	2018-08-20 11:33:51
Document Title	LePower Limited
Document Creator	Adobe Acrobat Pro 9.3.4
Document Author:	Administrator

东莞奇魁电子科技有限公司
QI QUICK TECHNOLOGY CO,LTD
Model No.: 9906
Rev.: 0.1
Car Charger Transmitter Module Specification
Model Name:
Model No.:
Date of Release:
Version:
3 Coil Module Qi Transmitter
9906
24 MAR,2018
0.1
东莞奇魁电子科技有限公司
QI QUICK TECHNOLOGY CO,LTD
Model No.: 9906
1.
Rev.: 0.1
Introduction
This product is a fast wireless charger designed for the automotive aftermarket. It can support
Samsung mobile phone 10W and Apple mobile phone 7.5 W wireless charging, can be compatible
and mainstream receivers on the market, and supports WPC Qi 1.2.4 version certification. This
product was launched in the third quarter of 2018.
2.
Product Features
·Can realize fast wireless charging
·Expanded free positioning using three coil transmit array
·WPC A28-Type transmitter coil, 70 mm × 25 mm free positioning area
·Designed for 9-Vdc systems
·Optional input power SEPIC converter to produce 9 Vdc from 6 .5V to 30 V
·Conforms to wireless power consortium (WPC)A28 transmitter type specification
·Support FOD function detection and comply with WPC1.2.4 standard
·Digital demodulation reduces components
·Over-current protection
·LED indication of charging state and fault status
3. Applications
·WPC 1.2 Wireless Chargers:
- In Cars and Other Vehicle Accessories
- Qi-Certified Smart Phones and Other Handhelds
- Industrial and Medical Applications
东莞奇魁电子科技有限公司
QI QUICK TECHNOLOGY CO,LTD
Model No.: 9906
4.
Electrical Specification
Parameters
Rev.: 0.1
Test Condition
Min Tpy
Max Unit
Input Characteristics-Transmitter 9906
V-in Input Voltage
I-in
Input Current
12
(Max. Load test with 5W/10W 0.25 0.58
Qi quick Rx)
Input on-Load Current Vin=12V,Receiver I=0A
20
Input stand-by current Vin=12v
30
50
mA
18.75
mA
Output Characteristics –5W Receiver Qi Quick
V-out Output Load
Output ripple
I-out I out=Min to Max
Vin=Nom, I=Nom
4.75
Vin=12V,Receiver I=1A
5.25
200
mVPP
I out=Min to Max
Output over current
I out=Min to Max
1.1
System Efficiency
V in=12V, P out Rx= 2.5W
72
205
Khz
9.45
200
mVPP
1.1
System Frequency
70
110
Output Characteristics –10W Receiver Qi Quick
V-out Output Load
Output ripple
I-out I out=Min to Max
Vin=Nom, I=Nom
8.55
Vin=12V,Receiver I=1.1A
I out=Min to Max
Output over current
I out=Min to Max
1.3
System Efficiency
V in=12V, P out Rx= 10W
78
205
Khz
System Frequency
110

Operating Temperature: 0 to +40°C

Storage Temperature:
-20 to +70°C
东莞奇魁电子科技有限公司
QI QUICK TECHNOLOGY CO,LTD
Model No.: 9906
5.
Simplified Design Diagram
6.
System Efficiency
Fig 1 QT1283 System Efficiency (test with 5W Quick Rx)
Rev.: 0.1
东莞奇魁电子科技有限公司
QI QUICK TECHNOLOGY CO,LTD
Model No.: 9906
7.
Rev.: 0.1
Functional Operation:
7.1LEDStatus indication: (TBC Updated)
模式 / Mode
Mode 1.
While the
PCBA is in
standby the
LED light
will be on.
The LED
color and
function will
be according
to this
diagram.
Mode 2.
While the
PCBA is in
standby the
LED light
will be off.
The LED
will turn on
when the
phone begins
charging
(color
according to
this diagram)
SW1
充电 /
Charging
待机 / Standby
充满 / Charging
Full
错误 / Error
红色 /
Red
On
Off
Off
Blink Slow
绿色 /
Green
Off
Off
On
Off
蓝色 /
Blue
Off
On
Off
Off
红色 /
Red
Off
Off
Off
Blink Slow
绿色 /
Green
Off
Off
On
Off
蓝色 /
Blue
Off
On
Off
Off
MODE1
短按 1 秒
MODE2
短按 1 秒
POWER(ON/OFF)
长按 2 秒
Notes 1:There should only be two modes. The unit should default to mode 1 when powered on. To
switch between mode 1 and 2 the user should press the button. If the user continues pressing the
button it will cycle between mode 1 and mode 2.
东莞奇魁电子科技有限公司
QI QUICK TECHNOLOGY CO,LTD
Model No.: 9906
8.
Mechanical Drawing
Rev.: 0.1
东莞奇魁电子科技有限公司
QI QUICK TECHNOLOGY CO,LTD
Model No.: 9906
Rev.: 0.1
59mm
9.
Packing Information



11.
Size (L x W x H): 106 x 56 x 8.6mm
Net weight:
Glossy weight:
Environmental Specification
 RoHS
 WEEE
 FCC, CE
If the label of the module is not visible on the final device, the final device should contain the following text: "Contains FCC ID:2AQPB-9906”
Ｐｒｏｄｕｃｔ Ｎａｍｅ： Ｗｉｒｅｌｅｓｓ ｃｈａｒｇｅｒ ｍｏｄｕｌｅｓ
9906
ＦＣＣ ＩＤ： ２ＡＱＰＢ－９９０６
Ｍｏｄｅｌ Ｎｏ．： ９９０６
LED模式功能说明
② ① ④
模式1
③
当pcba处
于待机状
态时，led
灯将会亮
着。led的
颜色和功
能将根据
右边这个
功能图。
车载无线充电模块
充电使用说明书
绿色LED点亮
⑥
绿色LED
⑦
取走手机
红色
黑色
红色线连接汽车电源DC12V+，黑色线连接汽车电源
DC12-，蓝色LED点亮，进入待机模式。
9906
Wireless Charging Module
for Vehicle
Using Guide
① 开关
蓝色LED
⑦ 充电线圈3
关
关
开
关
蓝色LED
关
开
关
关
当pcba处
于待机状
态时，led
灯将会亮
着。led的
颜色和功
能将根据
这个图。
支持
充电
充满
错误
红色LED
关
关
关
闪烁
绿色LED
关
关
开
关
蓝色LED
关
开
关
关
开关功能说明：
A:关机功能：待机红色LED灯状态下长按三秒,红色LED闪烁后关机.
B:开机功能：关机状态下长按三秒红色LED灯闪烁后开机。
C:模式切换：短按一下由模式1与模式2循环切换。
注意
本无线充电产品可以对市场上符合WPC标准的接收器相
容使用。
LED Mode Function Guide
Mode1
Mode 1.
While the
PCBA is in
standby the
LED light will
be on. The
LED color
and function
will be
according to
this diagram.
③
Green LED lights up
Put mobile phone with wireless charging receiver
into the area of 3 coils. The blue light will be on
which means wireless charging is working.
⑥
⑦
Take away the phone
Blue LED
① Power -key
② LED_Charging-green
③ LED_Standby-red
④ LED-Standby-blue
⑤ COLL1-Charging
Green light on means charging full. When take
mobile phone away, the green light will be off
and red light will be on.
⑥ COLL2-Charging
⑦ COLL3-Charging
Mode 2.
While the
PCBA is in
standby the
LED light will
be on. The
LED color
and function
will be
according to
this diagram.
Standby Charging
Charging
Full
Error
Red
On
Off
Off
Blink Slow
Green
Off
Off
On
Off
Blue
Off
On
Off
Off
Charging
Full
Error
Mode2
⑤
Green LED
Connect red line to car power DC12V+, Connect
black line to car power DC12V-. When red light
on the device is in standby mode.
开
绿色LED
相容性
② ① ④
black
红色LED
闪烁
⑤ 充电线圈1
⑥ 充电线圈2
red
错误
关
④ 充电灯-蓝色
③ 待机灯-红色
充满
关
当充电器上的接收装置放置的位置不对，或放置非Ql标
准指定发射装置时充电器不进行充电。
当手机放上去的时候出现错误，需拿起来重放，而不是
继续放著左右对位。
② 充满电-绿色
充电完成，取走手机。
绿色LED熄灭。
蓝色LED点亮。
充电
模式2
⑤
将具有无线电源接收功能的手机放置产品线圈中间
位置，绿色LED点亮，即可以实现无线充电功能。
支持
Standby Charging
Red
Off
Off
Off
Blink Slow
Green
Off
Off
On
Off
Blue
Off
On
Off
Off
Switch On/ Off：
A: Switch Off：When under standby mode, red light is on, push switch last
for 3 seconds. Red light flashes then power off.
B: Switch on：When under power off, push switch last for 3 seconds.
Red light flashes then power on.
C: Mode Switch：
Push switch one time will switch mode1 to mode 2 circularly.
Notice：
·Please use qualified Qi receiving device for charging. If the
position of receiver is not right, It may show no connection or
cannot charge. Please adjust the position.
Compatibility：
·This production is compatible with all wireless charging
receiver with WPC standard.
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may
cause undesired operation.
Warning: Changes or modifications not expressly approved by the
party responsible for
compliance could void the user's authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide
reasonable protection against harmful interference in a residential
installation. This
equipment generates uses and can radiate radio frequency
energy and, if not installed
and used in accordance with the instructions, may cause harmful
interference to radio
communications. However, there is no guarantee that
interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or
television reception, which can be determined by turning the
equipment off and on, the
user is encouraged to try to correct the interference by one or
more of the following
measures:
Reorient or relocate the receiving an
tenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set
forth for an
uncontrolled environment. This equipment should be installed and
operated
with minimum distance 20cm between the radiator & your body

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Author                          : Administrator
Create Date                     : 2018:08:20 11:33:51+08:00
Modify Date                     : 2018:08:20 11:33:51+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2018:08:20 11:33:51+08:00
Creator Tool                    : Adobe Acrobat Pro 9.3.4
Format                          : application/pdf
Title                           : LePower Limited
Creator                         : Administrator
Document ID                     : uuid:957bd57e-7013-4322-8564-fcf1e0a8d3a9
Instance ID                     : uuid:d5d141b9-7083-48f1-8fc4-f19bd4d352c0
Producer                        : Adobe PDF library 15.00
Page Count                      : 8
For                             : Administrator,
Bounding Box                    : 19 -32 941 592
Container Version               : 11
Creator Version                 : 21

EXIF Metadata provided by EXIF.tools