Boston Scientific Neuromodulation SC5232 SC-5232 User Manual 90668562 01 falconmanual en v8 indd

Download:
Mirror Download [FCC.gov]
Document ID	1747216
Application ID	1flV8nY68a+tdR1ZFhzk5w==
Document Description	Additional User Manual 7
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	256.98kB (3212273 bits)
Date Submitted	2012-07-19 00:00:00
Date Available	2012-12-12 00:00:00
Creation Date	2012-07-19 08:31:20
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2012-07-19 08:31:37
Document Title	90668562-01 falconmanual-en-v8.indd
Document Creator	PScript5.dll Version 5.2
Document Author:	mdepner

Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C
Delete a Program
Deleting a Program will completely remove the
Program from the Stimulator. Once the Program
is deleted, it cannot be recovered. Programs that
were configured by your healthcare provider cannot
be deleted and do not appear on the “Delete”
Program list. Only Programs that were created using
the “Copy To…” feature can be deleted.
Main Menu
Programs
Stimulation Areas
System Settings
Back
Select
From the Main Menu
, press
to
select Programs P .
Page 32
Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C
Programs
Change Program
Delete
Delete
Program3
Delete?
Save
3 Program3
Restore to
Clinic Settings
Yes
Copy to ...
No
Delete
Back
Back
Select
Select
Navigate to Delete
and press .
Navigate to the
Program you wish to
delete and press .
Back
Select
Navigate to Yes
to confirm or No
to cancel, then
press .
PROGRAMS
Page 33
Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C
This page intentionally left blank.
Page 34
Configuring Stimulation Areas
What is a Stimulation Area? ......................................36
Change a Stimulation Area Parameter .......................37
Save and Restore an Area in a Program .....................40
Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C
What is a Stimulation Area?
A Stimulation Area
is the building block
of a Program P . Each Program can include
settings for up to 4 Stimulation Areas. Each
Stimulation Area is identified by a letter and
a name, such as A B ... “Area A”.
These Stimulation Areas control parameters
that can affect your stimulation therapy.
These parameters are Amplitude
Pulse Width
, and Rate
. If your
healthcare provider has configured these
parameters to be adjustable, they can be
changed and balanced for each individual
Stimulation Area.
Page 36
Area A
Stimulation Areas
Area A
Amplitude
Area B
Pulse Width
Area C
Rate
Area D
Back
Select
Back
Select
Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C
Change a Stimulation Area Parameter
Main Menu
Area A
Stimulation Areas
Programs
Area A
Amplitude
Stimulation Areas
Area B
Pulse Width
Area C
Rate
System Settings
Back
Select
From the Main Menu
press
to navigate to
Stimulation Areas
, then
press
to select it.
Area D
Back
Select
Navigate to the Area
that you want to adjust
and press .
Back
Select
Navigate to the
parameter that you want
to adjust and press .
continued to next page
AREAS
Page 37
Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C
Area A
Stimulation Areas
Amplitude
Area A
Pulse Width
Area B
Amplitude
Area A
Rate
4.6 mA
Back
Press the
and
buttons to decrease and
increase the value for
the selected parameter.
Page 38
Back
Select
Area C
Area D
Back
Select
To change another parameter, press the left
Navigation button to return to the Area parameter
menu. Repeat steps 3 - 4. To change a parameter in
a different Area, return to the Area list in step 2.
Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C
Note
Increasing the values
for these parameters,
, may
especially Rate
significantly increase
the energy required for
stimulation. This may
lead to longer or more
frequent recharging of
the Stimulator.
Program 1
52.1%
Main Menu
When all desired changes
have been made, press
repeatedly until you return
to the Home Screen.
AREAS
Page 39
Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C
Save and Restore an Area in a Program
To save any Area parameter changes so that they are the default parameters,
you must save the Program P . This will save all changes to any Area
within that Program. You cannot save the changes for each individual Area
independently of changes for other Areas in the same Program. See
Save a Program page 26.
If, after saving changes to a Stimulation Area in a Program, you decide that you
want to revert the Stimulation Area back to the way it was configured by your
healthcare provider, you can do so by restoring the Program P . Restoring the
Program will restore all of the Stimulation Areas of that Program. See
Restore a Program page 28.
Page 40

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : mdepner
Create Date                     : 2012:07:19 08:31:20-07:00
Modify Date                     : 2012:07:19 08:31:37-07:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2012:07:19 08:31:37-07:00
Creator Tool                    : PScript5.dll Version 5.2
Format                          : application/pdf
Title                           : 90668562-01 falconmanual-en-v8.indd
Creator                         : mdepner
Document ID                     : uuid:47a4f012-22e6-4f6a-8c04-47aca86b91de
Instance ID                     : uuid:a905625d-eabf-4ae0-8188-9639abfcef54
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Page Count                      : 9

EXIF Metadata provided by EXIF.tools