Boston Scientific Neuromodulation SC5232 SC-5232 User Manual 90668562 01 falconmanual en v8 indd

Download:
Mirror Download [FCC.gov]
Document ID	1747222
Application ID	1flV8nY68a+tdR1ZFhzk5w==
Document Description	Additional User Manual 8
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	366.96kB (4586991 bits)
Date Submitted	2012-07-19 00:00:00
Date Available	2012-12-12 00:00:00
Creation Date	2012-05-24 17:40:02
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2012-05-24 17:41:00
Document Title	90668562-01 falconmanual-en-v8.indd
Document Creator	PScript5.dll Version 5.2
Document Author:	mdepner

About System Settings
Adjust Screen Brightness ...........................................43
Adjust Volume ..........................................................44
View Information about Your Remote Control or
Stimulator .................................................................45
Precision Spectra™ Remote Control Handbook, 90668562-03, Rev C
About System Settings
Using the System Settings
, you can set or change a
few RC interface settings, such as the Alert Volume ,
Screen Brightness , and the Language setting .
In addition, you can view information about the RC
and the Stimulator . Your healthcare provider can
access special functions through the Clinician Menu
(password protected) to aid you in your therapy.
Page 42
Remote Settings
Alert Volume
Screen Brightness
Languages
Back
Select
Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C
Adjust Screen Brightness
System Settings
Remote Settings
Programs
Remote Settings
Alert Volume
Stimulation Areas
System Info
Screen Brightness
System Settings
Clinician Menu
Languages
Main Menu
Back
Select
Back
Select
Select Remote
From the Main
Settings by
Menu
, select
System Settings
. pressing .
Back
Select
Screen Brightness
Back
4/5
Select Screen
Brightness
by
pressing .
To decrease or
increase Screen
Brightness, press the
or the
button.
SYSTEM SETTINGS
Page 43
Precision Spectra™ Remote Control Handbook, 90668562-03, Rev C
Adjust Volume
The RC emits a single, short Alert that sounds like a “beep” whenever you press
a button. The volume of the Alert can be adjusted or turned off.
System Settings
Remote Settings
Programs
Remote Settings
Alert Volume
Stimulation Areas
System Info
Screen Brightness
System Settings
Clinician Menu
Languages
Main Menu
Back
Select
Back
Select
Select Remote
From the Main
Settings by
Menu
, select
System Settings
. pressing .
Page 44
Back
Select
Select Alert
Volume
by
pressing .
Alert Volume
Back
4/5
To increase or decrease
screen volume, press the
or the
button.
Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C
View Information about Your Remote Control or Stimulator
You can view basic information about your RC and Stimulator that may be
helpful for your healthcare provider when troubleshooting an issue.
System Settings
System Info
System Info
Programs
Remote Settings
Remote Info
Remote Info
Stimulation Areas
System Info
Stimulator Info
Stimulator Info
System Settings
Clinician Menu
Main Menu
Back
Select
Back
Select
Back
Select
Back
Select
OR
Select System
From the Main
Info by
Menu
, select
System Settings
. pressing .
3a
3b
Select Remote Info Select Stimulator Info
by pressing .
by pressing .
SYSTEM SETTINGS
Page 45
Precision Spectra™ Remote Control Handbook, 90668562-03, Rev C
This page intentionally left blank.
Page 46
Reminders and Messages
Save Changes Screen ................................................48
Battery Low and Recharge Messages .........................49
Charging Remote Screen ..........................................51
Charger Disconnected Screen ...................................51
Remote Battery Full Screen ........................................52
Button Stuck .............................................................52
End of Programmed Service ......................................53
Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C
Save Changes Screen
The Save Changes
confirmation screen will appear under the following conditions:
• One or more changes have been made to the Program currently running, including:
changes in stimulation strength (on the Home Screen), changes to any of the
Stimulation Area parameters AND…
• The Program that is running is about to be changed to a different Program. This can
occur when selecting either Change Programs
or Restore to Clinic Settings
from the Programs Menu.
If you want to save the change(s), select Yes – Save
. These settings will be the
default settings the next time this Program is selected to be run.
If you do not want to save the change(s), select No – Discard. The original Program
settings will be maintained and any change(s) will be discarded. The RC will then
proceed to the function that you selected – either Change Programs
or Restore to
Clinic Settings .
Page 48
Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C
Battery Low and Recharge Messages
The RC will provide on-screen
messages to remind you when your
Stimulator and RC batteries are low.
For the Implant, the following onscreen messages display:
Low
Stimulator
Battery
Press
to continue
For the Trial Stimulator, the following
on-screen messages display:
ETS = Trial
Stimulator
Low
ETS
Battery
Charge
Stimulator
Now
Press
to continue
For instructions on recharging the
Implant, refer to your Charger
Handbook.
Press
to continue
Replace
Battery
Now
Press
to continue
For instructions on replacing your
Trial Stimulator batteries, refer to your
Patient Trial Handbook.
REMIND/MESSAGE
Page 49
Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C
For the RC, the following on-screen
messages display:
Low
Remote
Battery
Press
Charge
Remote
Now
to continue
Refer to Recharging the Remote
Control page 16 of this handbook
for more information on charging your
RC.
Page 50
Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C
Charging Remote Screen
Charger Disconnected Screen
This screen is displayed when the RC is
being used and the USB power supply is
plugged in.
This screen is displayed when the RC is
being used and the USB power supply
is disconnected.
Charging
Remote
Charger
Disconnected
REMIND/MESSAGE
Page 51
Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C
Remote Battery Full Screen
Button Stuck
This screen is displayed when the
RC is being used and the RC battery
becomes fully charged.
If a button is stuck on the RC, other
button presses may not function as
intended. The RC will provide the
following on-screen message if it
detects a stuck button:
Remote
Battery
Full
Please attempt to resolve the stuck
button in order to restore proper
functionality of the RC.
Page 52
Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C
End of Programmed Service
Your Stimulator software has been
programmed to end service after a
defined period. When your Stimulator
is within approximately 180 days of
the end of its programmed period, the
RC will display the following on-screen
message:
~180
Remaining days
of service
Press
Press
to clear the message. The
message will reappear approximately
weekly until the end of the Stimulator’s
programmed period is reached. When
the end of its programmed period
is reached, the RC will display the
following on-screen message:
Stimulator
Service
Exceeded
to continue
REMIND/MESSAGE
Page 53
Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C
This page intentionally left blank.
Page 54

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-702
Modify Date                     : 2012:05:24 17:41-07:00
Create Date                     : 2012:05:24 17:40:02-07:00
Metadata Date                   : 2012:05:24 17:41-07:00
Creator Tool                    : PScript5.dll Version 5.2
Format                          : application/pdf
Title                           : 90668562-01 falconmanual-en-v8.indd
Creator                         : mdepner
Document ID                     : uuid:0fe5925d-f2b6-4c1c-97e4-67f10ce1d870
Instance ID                     : uuid:8cf96eb6-7713-40c3-b00a-a56cc2b1685c
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Has XFA                         : No
Page Count                      : 14
Author                          : mdepner

EXIF Metadata provided by EXIF.tools